d968e32c3a
Add usscanner.
2001-01-11 06:03:21 +00:00
5395f63f35
Revert apparently accidental commit.
2001-01-09 12:03:15 +00:00
7a9f0b9a95
sync to GENERIC 1.390:
...
- add an NIC & vlan
- add auich, esm, neo audio
2001-01-09 00:47:18 +00:00
6ac8983e9d
sort auich in respect to auvia
2001-01-09 00:40:53 +00:00
f53c899649
Add isdn devices to all archs that seem to support at least one of the
...
necessary busses. Sync comments with reality for archs that already had
the devices.
2001-01-08 21:46:33 +00:00
c6274d6e3d
Add and enable the esm PCI audio driver
2001-01-08 20:48:11 +00:00
7e14d8a67c
Cosmetics
2001-01-05 23:58:02 +00:00
ebb91e152f
Disable the daic driver for now. It's microcode handling needs
...
some thougths (legal problems), and the driver is not ready
for prime time anyway.
2001-01-05 23:22:01 +00:00
c3cb638bca
Initial import of ISDN4BSD release 0.96
2001-01-05 12:49:52 +00:00
c95706b81d
Long gone.
2000-12-29 21:52:03 +00:00
efc2dc7903
ZHADUM is dead, ZSR doesn't need to be checked in.
2000-12-29 21:50:43 +00:00
35670ca600
Undo 1.385; put wss0 back in GENERIC.
...
Just like any ISA device, if you don't have the device at the configured IRQ,
you could lose if something else decides it wants that IRQ. wss is not
a special case.
2000-12-22 16:35:51 +00:00
4dfc667a6d
Add pseudo-device vlan, OK'd by Manuel Bouyer.
2000-12-21 10:36:15 +00:00
81ab9f2251
Put 'an* at isapnp?' in alphabetical order.
2000-12-20 10:44:29 +00:00
ba933b24f7
Add peudo-device vlan
2000-12-19 10:34:11 +00:00
2db538c869
separate the freebsd syscall code similarily to other emulations
2000-12-18 20:38:27 +00:00
3926121843
Comment out the isa wss driver.
...
GENERIC is the kernel used on new installs and too many things overlap the
resources (irq mostly) the default isa version may be using which causes
panics on reboot.
2000-12-17 22:53:52 +00:00
0a8ec4baf3
Add an at isapnp.
2000-12-17 20:35:45 +00:00
cacec11253
delete obsolete comment
2000-12-17 15:52:39 +00:00
a7125e435c
Add PCI version of Aironet, not tested at all.
...
ISA/ISApnp version won't come since I don't know about isa...
2000-12-14 04:11:25 +00:00
4ce4648c24
Add the an(4) driver to these configurations as well.
2000-12-12 21:14:51 +00:00
9c25e9208a
Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD.
...
This is very adhoc work for IETF meeting.
- Since it seems that 'an' and 'wi' have similar hardware, low level
functions should be shared.
- There are PCI/ISA cards of Aironet but not supported yet.
- The wiconfig interface is changed so that wiconfig cannot be used.
- 'ancontrol' of FreeBSD is not ported.
- Only infrastructure mode is tested.
- WEP is not supported.
Though I only have an Aironet card, Cisco card should be expected to work.
2000-12-11 23:16:50 +00:00
f495cd9dc6
Introduce 2 new flags in types.h:
...
* __HAVE_SYSCALL_INTERN. If this is defined, e_syscall is replaced by
e_syscall_intern, which is called at key places in the kernel. This can be
used to set a MD syscall handler pointer. This obsoletes and replaces the
*_HAS_SEPARATED_SYSCALL flags.
* __HAVE_MINIMAL_EMUL. If this is defined, certain (deprecated) elements in
struct emul are omitted.
2000-12-11 05:28:59 +00:00
3340782619
Add a separate svr4_syscall().
2000-12-09 06:30:54 +00:00
6719ee1cf7
as discussed on tech-kern, put linux and ibcs2 syscall code to separate
...
files and change syscall() to call p->p_emul->e_syscall() if it's not NULL
2000-12-02 16:03:23 +00:00
f9450fa993
Put neo* in alphabetical position.
2000-11-28 19:44:07 +00:00
3f877e127e
Add auich(4) and neo(4).
2000-11-28 05:18:42 +00:00
66864e1f05
Removed increased BUFCACHE/BUFPAGES.
2000-11-27 08:55:41 +00:00
cee3939088
comment out entries accidentaly committed together with previous
...
change
2000-11-26 20:48:39 +00:00
57ea462da2
lsu -> ld, by popular request.
2000-11-26 17:44:02 +00:00
bc435e5551
rename COMPAT_locore.s to COMPAT_sigcode.s - that is more suitable name for it
...
make the files compilable within LKM
2000-11-26 11:18:20 +00:00
c40695f5ad
a complete kernel for wildlab LAMB, http://www.wildlab.com/ .
2000-11-26 03:28:41 +00:00
3323852a95
put compat-specific locore code to separate *_locore.s files
2000-11-21 21:13:23 +00:00
0630488eda
fix typo
2000-11-20 20:07:36 +00:00
3b15e411a3
add moxa0 at isa entry, marked as experimental
...
This was not added also to other config files primarily because the
driver is not properly tested yet; this entry is primarily meant as an example
for those brave souls who want to try moxa.
2000-11-20 19:53:43 +00:00
046ce58634
Enable com at cardbus.
2000-11-20 02:00:46 +00:00
a687c7deac
pull up stuff changed in GENERIC from 1.370 - 1.377, appropriately
...
commented out if it's not relevant to a laptop
2000-11-18 02:08:30 +00:00
eb9736c09a
Add uscanner.
2000-11-14 19:52:04 +00:00
33c21c5f16
Sort.
2000-11-08 21:47:25 +00:00
36e51ea5c5
Add I2O stuff.
2000-11-08 19:50:07 +00:00
e6be92ad99
Pull in dev/i2o/files.i2o.
2000-11-08 19:48:51 +00:00
5929990d15
Add `bktr'.
2000-11-07 06:02:24 +00:00
e83458422f
First Prototype implementation of network interface part for IEEE1394 (if_fw).
...
Current status:
Only OHCI chip is supported (fwohci).
ping (IPv4) works with Sony's implementation (SmartConnect) on Win98.
sometimes works but not stable.
Not implemented yet:
IRM (Isochronous Resource Manager) functionality.
Link layer fragmentation.
Topology map.
More to do:
clean ups
MCAP
charactor device part
dhcp
There is no entry in GENERIC config file yet.
Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
2000-11-05 17:17:12 +00:00
f6099127b7
DELPHI -- one of my devel machines at Zembu Labs. This is an
...
example of how to configure the PC-Weasel driver into the kernel.
2000-11-05 03:51:14 +00:00
9572bf6261
These are incredibly out of date.
2000-11-01 07:58:42 +00:00
69e9b0392f
Sync INSTALL with GENERIC and INSTALL_LAPTOP with GENERIC_LAPTOP with
...
regard to wireless network interfaces and pcic iomem size (i.e.
bump iomem to 0x1000 and enable cnw, awi and ray).
2000-10-31 15:54:50 +00:00
3c01d4cbca
Add support for sampling the random number generator on
...
the 810, 815, 820, and 840 chipsets. From OpenBSD, modified
for NetBSD by me.
2000-10-27 22:49:21 +00:00
dfcc2820fa
Add rtk at pci, some laptops have it.
...
Add cardbus network cards to INSTALL_LAPTOP (oops, they're largely
the point of INSTALL_LAPTOP..).
From Noriyuki Soda.
2000-10-23 09:31:49 +00:00
15e25fe73f
- ca -> lsu
...
- Hook in twe.
2000-10-19 14:32:20 +00:00
7bb188de0c
WSCONS_DEFAULT_TYPE is obsolete; use VGA_CONSOLE_SCREENTYPE instead.
2000-10-15 10:08:00 +00:00
2824f4906d
Ensure all INSTALL* kernels have two ptys, and a note explaining why:
...
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.
2000-10-02 18:43:34 +00:00
654c1d3603
Adjust after some comments from Noriyuki Soda:
...
apm was enabled in the wrong file, it's not needed in INSTALL_LAPTOP,
but should be there in GENERIC_LAPTOP.
wss0 at isa irq 10 may cause conflicts on some laptops; remove it.
Despite its name, PCIBIOS_INTR_GUESS is safe option, so enable it.
2000-10-02 12:54:39 +00:00
32a995f65b
Oops, remove test leftover setting of REALEXTMEM.
2000-10-02 12:22:53 +00:00
09440c52d2
Squeeze some more. Do what it has been advertising all along: no SCSI. Use
...
-Os. Remove NFSSERVER.
2000-10-02 08:12:04 +00:00
f47a0f34f9
Squeeze even more by removing some COMPAT_1X options, com* (serial
...
ports aren't supported for installation), MFS, slip and ppp. There
was no room for pppd and slattach on the "tiny" floppies anyway, so
there was nothing to use them.
Add pcic at isa, pcmcia, wdc at pcmcia, and 'wireful' cards @ pcmcia
(ne, ep, mbe, sm). Installing is now possible on a 4M laptop over
ethernet (tested with ep at pcmcia, and 640+3200 available memory).
2000-10-01 16:20:01 +00:00
890dedaed3
Set the # of ptys to 2.
2000-09-30 13:25:12 +00:00
c84826de03
Enable usb devices that may be useful during the install (hubs, keyboard,
...
ethernet, mass storage).
2000-09-27 20:41:35 +00:00
3a999fb11f
A GENERIC and INSTALL tailored for laptop usafe (i.e. cardbus and
...
PCIBIOS options included).
2000-09-27 16:57:09 +00:00
0619e37229
Reduce ramdisk size to the amount that is really needed for optimal
...
space saving. Reduce number of ptys to 2. Use NFS_V2_ONLY.
2000-09-27 16:54:56 +00:00
48b43cdfb9
Remove some less-needed items to save space. Also add NFS_V2_ONLY,
...
to save more space. For installs, NFSv2 will do just fine.
2000-09-27 16:09:18 +00:00
a01a66c525
cac* at eisa? reported as working.
2000-09-26 11:51:14 +00:00
3ef92f0bdb
Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
...
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.
2000-09-25 13:54:50 +00:00
ccf1c822a6
Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
...
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings
2000-09-25 11:46:37 +00:00
b1f94e26ab
don't specify number of ptys if >= 16 (current default initial number)
...
pty comments: normalize and g/c what is no longer relevant
2000-09-24 15:59:26 +00:00
0564259315
Make this a more likely laptop config file.
2000-09-22 00:18:17 +00:00
bda9ce7990
Enable VM86 -- it's needed for some X servers (notably, S3 Savage,
...
which runs the VESA BIOS in VM86 emulation in order to switch video
modes).
2000-09-20 18:22:22 +00:00
dbe9b6987f
Enable VM86 and DUMMY_NOPS.
2000-09-20 18:20:55 +00:00
3d6272fcdf
Use VNODE_OP_NOINLINE.
2000-09-13 16:26:15 +00:00
90a2e46ab1
Add support for using the 586- and 686-class performance
...
counters.
2000-09-13 04:47:00 +00:00
cbb605647a
add (commented out) entry for WSCONS_DEFAULT_TYPE
2000-09-10 11:48:38 +00:00
a1139ee535
Example config file for enabling large page support.
2000-09-07 18:55:30 +00:00
a68986edfc
Add optional support for mapping the kernel with large (4MB) pages.
...
Right now, only does kernel text, and wastes a little memory, but
there is some noticeable performance improvement even with just text.
2000-09-07 17:20:58 +00:00
2204402aa1
If KERN_LDSCRIPT is specified as a makeoption, then add it to the
...
linker flags.
2000-09-07 06:39:36 +00:00
1946ce2a42
A linker script based on elf_i386.x which aligns the .data segment
...
to a 4MB boundary, thus allowing the text and read-only data to be
mapped using large pages.
2000-09-07 06:36:24 +00:00
5755dca55d
Fix typos.
...
No functional changes.
2000-08-21 07:39:42 +00:00
37262919a9
Edit adv0 comment to include "SCSI"; now 'grep -v -i SCSI GENERIC' works.
2000-08-15 20:09:26 +00:00
47b371580e
make this usable as INSTALL-like kernel suitable for boot floppy
...
enable supported stuff, add also SCSI devices (only sd* and cd* uncommented)
2000-08-13 21:55:33 +00:00
85dda25e94
move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
...
as it is no wthe default setting for everyone.
the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.
2000-08-13 01:31:15 +00:00
be6120309f
add commented out PCIBIOS_INTR_GUESS
2000-08-10 21:33:17 +00:00
834cceb3ae
move PCIBIOS_INTR_FIXUP_FORCE, PCIBIOS_INTR_GUESS and PCIBIOS_IRQS_HINT
...
to opt_pcibios.h.
2000-08-10 21:21:02 +00:00
6ee3189cb6
Alphabetize.
2000-08-04 11:51:37 +00:00
37ae63598b
Add midi at clcs.
2000-08-01 08:16:54 +00:00
cc41b6af8f
remove COMPAT_AOUT option.
2000-07-27 14:34:06 +00:00
36b85ab9c7
hexadecimal constant in "options" value doesn't need quotation.
2000-07-18 11:41:32 +00:00
71ccd6200d
Add (but commented) COMPAT_PECOFF entry.
2000-07-17 14:37:53 +00:00
9ad7bd8d37
Increase the example DDB_HISTORY_SIZE.
2000-07-09 01:36:06 +00:00
33090b8b89
Enable DDB history.
2000-07-09 01:35:52 +00:00
0ef0f52d06
Turn on DDB history by default.
2000-07-09 00:41:24 +00:00
d770f87fef
Pullover rev 1.320 - rev 1.358 of GENERIC to IOPENER, and merge conflicts.
...
Add GENERIC rev in "from:" line to aid in future merging.
Major highlights include SOFTDEP, and, err, 4 blank lines.
2000-07-08 03:24:36 +00:00
71f3f1c282
Pullup rev 1.233 - rev 1.358 of GENERIC to CARDBUS, and merge conflicts.
...
Add GENERIC rev in "from:" line to aid future merging.
Major highlights include COMPAT_14, COMPAT_AOUT, NTFS, OVERLAY,
SOFTDEP, INET6, IPSEC, pcic iosiz changes, cz, dpt, rtk (cardbus!),
awi, cnw, ray, wi, xi, joy, and gif.
2000-07-08 02:47:02 +00:00
502fc00210
Comment out EON ISO-over-ip tunneling pseudo-driver, and document as
...
broken/fragile. Unlikely to be of much use, and confuses new users
when their system crashes when they, or their dhclient stumble over
it. See kern/10500, kern/8994 for the gory details.
2000-07-05 04:07:22 +00:00
01d5ad3ab6
White-space improvements.
2000-07-03 01:17:35 +00:00
d76ae83df8
add PULLDOWN_TEST for all the platforms.
...
XXX should be moved to somewhere else when stabilized
2000-06-30 17:10:15 +00:00
1ee7d22c0b
Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.
2000-06-22 20:27:49 +00:00
099ead3895
increase size to allow for dhclient
2000-06-18 23:53:32 +00:00
80365fb67d
Change comment: APM_POWER_PRINT _does_ print stats on the console.
2000-06-16 10:31:03 +00:00
9424f6fe54
Update with reality.
2000-06-16 03:49:12 +00:00
ff36cd64b7
Rearrange the npx driver a little to allow for multiple attachments
...
and add a pnpbios atttachment for it.
2000-06-16 03:47:24 +00:00
573c583527
If any config file here ever deserved NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM, it
...
would probably be DISKLESS. Make It So. Also retire UNDERWORLD as I'm no
longer at Dreamworks with those delightful old ex-NeXTStep P133s.
2000-06-15 18:16:10 +00:00
839042fb97
Don't have an xi in this machine.
2000-06-14 22:29:03 +00:00
223d7455c7
Remove the obsolete config fragments for kernel crypto, because the IPsec
...
crypto code is now in the kernel source tree.
2000-06-14 22:02:13 +00:00
9884ae5ff6
Remove pcvt tentacles.
2000-06-11 02:41:10 +00:00
ead295db1b
Alphabetize.
2000-06-11 00:21:01 +00:00
b5cca46229
Make siop the default instead of ncr. The siop driver has proven to
...
be reliable, and, although it does not do tagged queueing yet, this
makes it a better choice.
2000-06-08 21:42:14 +00:00
733a6e059b
Increase the miniroot size to 3072 (to match INSTALL and INSTALL_TINY).
...
This is needed due to TI-RPC being larger.
2000-06-07 19:29:45 +00:00
adb2efef6b
Autonegotiation with xi driver is reported to work. Use it on the
...
install media.
2000-06-07 02:16:06 +00:00
d0241b393f
Replace references to xe with xi. Clarify description to avoid
...
confusion with the Xircom tlp-based cards.
2000-06-05 23:18:50 +00:00
9e1f399ada
fix `#scsibus at siop?' line
2000-06-05 13:34:13 +00:00
11382b8021
Add APM_ALLOW_BOGUS_SEGMENTS - allow the use of data segments which
...
are in unexpected locations.
2000-06-04 22:36:27 +00:00
9dcdff8f25
Add stubs for PE/COFF.
2000-06-04 16:26:11 +00:00
156fa3d59c
Remove entry for non-existant driver that entered GENERIC in 1.289
...
and propagated to others when sync'd.
2000-06-01 04:24:00 +00:00
2e7afc702d
Update.
2000-05-28 21:49:02 +00:00
e51303c17e
Mirror last change to GENERIC.
2000-05-28 21:48:52 +00:00
daa86a0be1
Add patchable "pnpbiosdebug" global if PNPBIOSDEBUG is compiled in,
...
and add PNPBIOSDEBUG_VALUE to initialize its value, defaulting to 1.
2000-05-28 21:46:04 +00:00
fb6d063b8c
pnpbios from 1.344 didn't config. s/pnpbios0/pnpbios?/
2000-05-28 21:12:00 +00:00
4af4c47f80
Tidy up a little, improve PnP BIOS section.
2000-05-28 20:11:59 +00:00
b6c4eb81fd
Massive cleanup and syncing with GENERIC
2000-05-28 20:10:29 +00:00
ab415393d3
`ep' has `plug-and-play' support on all buses, including non-PnP ISA.
...
Attach ep* at isa instead of ep0, so we will autoconfigure all 3c5x9s.
2000-05-28 02:42:16 +00:00
2649f518ec
note in BIG WARNING LETTERS that MCA support is experimental and the
...
kernel should only be used for experimentation
comment out some stuff not present or used on my development machine
g/c ef
add (commented out) aha attachment
2000-05-26 20:59:07 +00:00
af43639ded
Fixed typo in ses comment - devies -> devices
2000-05-25 01:34:18 +00:00
78112e2541
Add `ses' (SCSI Enclosure Services) device.
2000-05-22 16:48:41 +00:00
bdc8c2f8f4
Alphabetize.
2000-05-20 21:34:48 +00:00
1cd1663317
Disable the viaenv driver and remove the siop entry which was added
...
in the last commit.
2000-05-19 10:23:36 +00:00
56512515f8
Add Cyclades-Z serial.
2000-05-17 18:08:50 +00:00
2dc49a4780
Comment out XSERVER and XSERVER_DDB and move them to the pccons-specific
...
section. They are not used with wscons.
2000-05-14 04:36:09 +00:00
ed3acc8fbb
zsr has acquired a wi card
2000-05-12 03:14:21 +00:00
8fedbd8497
Add i386-specific part of MicroChannel Architecture bus support, as
...
found in some older IBM PS/2 machines.
This code is based upon work by Scott D. Telford, with some minor bits
in arch/i386/mca/mca_machdep.c taken from FreeBSD.
XXX this is still very experimental and development version; use at your
XXX own risk
2000-05-11 16:38:10 +00:00
9f48bba3ae
Add "install" target, so "make install" after building the kernel
...
does something useful. The target can be redefined by putting a
install-kernel-${MACHINE_NAME} target that fits your needs into
/etc/mk.conf.
2000-05-09 00:56:21 +00:00
6a33c86623
HAVE_GCC28 -> HAVE_EGCS, and make it match gcc 2.9 as well. Also,
...
make the use of -Wno-uninitialized explicit, don't rely on a compiler
hack to do it for us.
2000-05-09 00:32:19 +00:00
30be57ab7b
Disable DDB_ONPANIC=0. A plain reboot in case of problems isn't really
...
helpful at install times, regarding diagnostics.
2000-05-09 00:28:22 +00:00
89ef6f9a91
add viaenv template
2000-05-08 18:41:26 +00:00
3a6e3a4670
Add (sometimes commented out) MIIVERBOSE option.
2000-05-08 13:49:44 +00:00
784bcfd6ba
add bktr device
2000-05-07 00:41:06 +00:00
c82c8655cf
Add comment suggesting s/com[0-9]/com*/ and s/lpt0/lpt*/
...
if you enable com*/lpt* at pnpbios0, to avoid attaching
com0 as com3.
Don't actually change the "com0 at isa" line, since doing so
would cause some com* (e.g. pcmcia) to be renumbered from com3
to something lower, at least on some systems.
2000-05-04 19:41:44 +00:00
9f9f06401c
Add (commented out) cms(4) driver.
2000-05-02 11:00:56 +00:00
4a30060c43
Add C-Media CMI8x38, cmpci.
2000-04-30 22:00:54 +00:00
d7592a72fe
Update comment in adw*
2000-04-30 19:08:19 +00:00
bd5f21ffeb
add PCIBIOS_ADDR_FIXUP, PCIBIOS_IRQS_HINT configuration. and its sample.
2000-04-28 17:23:51 +00:00
bfced25d78
Update with reality.
2000-04-23 17:51:21 +00:00
0cde36f780
Carve off the ISA configuration bits from the floppy driver. Driver is
...
still ISA-specific, but we can attach ISA instances with different
configuration mechanisms now.
2000-04-23 16:47:45 +00:00
7c6a2dcd6d
name change; rl -> rtk
2000-04-22 06:56:20 +00:00
79f12736c0
Add (commented out) addcom0 and com* at addcom?
2000-04-21 17:52:06 +00:00
784977f319
Changes the name of RealTek driver. The new name is `rtk'. This used
...
to be called `rl' and it conflict with RL vax disks, canonical and
historical unix driver name.
This changes are minimal: it only changes the name of RealTek driver.
The filename of source code and a lot of the letter `rl' in source
files should be changed shortly.
2000-04-19 08:44:31 +00:00
3be41bae18
add stf pseudo interface (commented out due to possible security risks)
2000-04-19 06:50:27 +00:00
2f7f997512
Oops, forgot RCS ID.
2000-04-16 19:46:54 +00:00
506bf156e0
Kernel configuration file for my Abit BP6+dual Celeron machine. This
...
could be used as an example configuration file for that motherboard.
2000-04-16 19:46:21 +00:00
24d492c6f3
Default the keymap to new "us.iopener" mapping
2000-04-14 23:14:25 +00:00
633209364f
Add FTDI FT8U100AX driver.
2000-04-14 14:53:32 +00:00
689485b4df
Add Rio 500 device.
2000-04-14 14:44:49 +00:00
1498ccad74
add com at cardbus
2000-04-13 11:21:18 +00:00
39a71b22e4
add com at cardbus comment
2000-04-13 11:20:06 +00:00
f0f4d101b2
Add rl cardbus attachment.
2000-04-10 07:58:18 +00:00
b0789bc4f4
Add upl(4) driver. Uncomment uvisor(4) driver.
2000-04-09 18:34:02 +00:00
12188e5241
A GENERIC-like configuration for the Netpliance i-opener.
2000-04-08 21:27:07 +00:00
6dd5a9db6e
Use dev/isa/fd.c.
2000-04-07 16:35:19 +00:00
afc40c7421
comment out (erroneously?) added mcabus, until dev/mca exists
2000-04-06 23:55:04 +00:00
cef3c93f82
Switch to MI ns_cksum.c - the MD ns_cksum.c is equivalent to it
...
(modulo some u_intX_t vs. u_char type usage). In particular, the
MD version didn't contain any MD code.
2000-04-06 13:37:49 +00:00
9a31a8c77f
Add atapibus* at umass?
2000-04-03 00:03:28 +00:00
56e25c18bb
Add and enable auvia
2000-03-31 04:47:52 +00:00
dbf4f91643
Add (commented out) uvisor driver.
2000-03-30 17:01:01 +00:00
0a1221cb28
Added a PCI frontend for the legacy ISA joystick driver.
...
Some PCI soundcards don't seem to use the generic gameport function with
interface 0x10 used here, but have either an own BAR dedicated to this
(i.e. Sonic Vibes or ESS Solo-1) or specify their own device (see
PCI_PRODUCT_CREATIVELABS_SBJOY in sys/dev/pci/pcidevs.h).
Probably these use a similar simple sheme and adding a frontend for them would
be trivial, but I don't own any of these cards, so I didn't.
2000-03-26 15:36:48 +00:00
7da71e5f9e
Make IPKDB working again.
...
Add support for i386 debugging and pci-based ne2000 boards.
2000-03-22 20:58:25 +00:00
5644a7e248
Update awi driver, which now supports AMD 79c930 based 802.11 DS cards
...
as well as 802.11 FH cards. Also, it can operate in infrastructure mode,
adhoc mode, and wi(4) (aka WaveLAN/IEEE) compatible adhoc mode.
2000-03-22 11:22:20 +00:00
7c35662066
add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.
2000-03-22 00:58:16 +00:00
cb42a200a1
Add scsibus at esp.
2000-03-19 22:35:43 +00:00
1a5e8d741b
Add esp at pcmcia.
2000-03-19 22:32:59 +00:00
ce0c2b1962
Attach cac* at pci?, ca* at cac?. Commented out where needs be.
2000-03-16 15:05:18 +00:00
d8bd9a762a
Make ca(4) useable as a block/boot device.
2000-03-16 14:53:29 +00:00
20b063e782
Add new files for common ahc EISA/VL code.
2000-03-15 02:10:41 +00:00
072f9f5b69
Some whitespace changes.
2000-03-14 22:37:55 +00:00
1bad2e1909
Add the RAIDframe device major to the machine-dependent config files
...
so that the right entries get added to dev_name2blk[]. Needed for / on RAID.
(Whoops! I missed checking these in when adding the RAID_AUTOCONFIG stuff.)
2000-03-14 15:56:51 +00:00
0a77d41f4f
clean up lm0 example
2000-03-10 06:03:18 +00:00
f3f4e44c39
fix typo
2000-03-09 16:49:22 +00:00
752c98f8ea
Add (commented out) lm driver examples
2000-03-09 04:12:42 +00:00
6ac3fc2a55
beautify APM_DISABLE_INTERRUPTS line (s/options\t/options \t/)
2000-03-06 18:45:42 +00:00
8781f55d6a
Invert the APM_NO_POWER_PRINT flag, and make sure it's off by default.
2000-03-04 21:37:23 +00:00
4eb55e447c
Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.
2000-02-29 06:32:20 +00:00
d128de6bc6
Change miniroot size to 3072.
2000-02-27 20:26:07 +00:00
6c10d82f8d
Add (commented out) PCIBIOS options so people can find them easily.
2000-02-27 16:51:39 +00:00
d9c47013b2
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
...
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.
2000-02-26 17:35:33 +00:00
13fc260296
s/options\t/options \t/ for CONS_OVERRIDE line, so that addition/removal of
...
"#" does not affect indentation.
2000-02-26 17:12:37 +00:00
815f93520f
- Attach dpt0 to the isa bus. Commented out since (a) at any valid address it
...
conflicts with too much other stuff (b) if I UTSLed correctly, EISA boards
may be picked up at an "ISA address and an EISA address" - I don't have
enough info on this yet to fix it (c) a DPT HBA at an address usually
assigned to wdc0/1 may get detected as a WD100x controller. Some of them can
emulate a WD100x controller, but the one I tested with doesn't.
- Sync with GENERIC just a little.
2000-02-24 18:49:40 +00:00
971144c47f
Add ess at pnpbios
2000-02-15 17:14:50 +00:00
fd8c03cf44
Allow arch-specific code to specify in4_cksum() like it can specify
...
in_cksum().
2000-02-14 21:42:50 +00:00
dc80cc068b
Move KERNBASE to 0xc0000000, giving the kernel a more-or-less full 1G
...
of virtual address space, leaving userland with 3G, and update comments
to match the new reality.
We knew we were going to have to bite this bullet eventually, and there
are a couple of outstanding PRs related to this issue (9389 and 9313).
Complete solution to those PRs is going to involve some sort of run-time
decision on how large kmem_map should be, as well as changing some data
structure allocation strategies in UVM. However, this change will at
least allow the PR submitter to simply throw resources at the problem.
2000-02-11 07:00:11 +00:00
a3b8d596d5
Sync with GENERIC.
2000-02-08 03:10:21 +00:00
834e04377c
Remove ADW_*_DISABLE options. Now they are described in the adw.4 man page
2000-02-03 20:31:42 +00:00
eff80a379b
Due to popular demand (hi Bernd), comment out the CardBus entries.
...
Appearently it doesn't work for some chipsets. I think the right way
to fix this would be to only let cbb attach to the working chipsets...
2000-02-02 20:39:35 +00:00
9e8d441535
Add CardBus support. If it breaks anything, I'm sure we'll know soon. :)
2000-02-02 20:17:13 +00:00
4369c3338a
Change the size of the PCMCIA controller memory window to 64K. Several
...
of the radio LAN cards need it.
2000-02-02 19:48:18 +00:00
11c8f56d48
Revert STRIPPROG -> STRIP
2000-02-01 05:25:24 +00:00
799634df70
next step in getting machdep.c maintainable - put bus_space related
...
stuff into a separate file
2000-01-26 18:47:59 +00:00
5251f5550d
Add ahc at cardbus
2000-01-26 06:47:41 +00:00
85fcd0b58d
Update for the ucom(4) addition.
2000-01-25 08:31:56 +00:00
4be7a36436
Add Raytheon RayLink.
2000-01-25 01:50:12 +00:00
a443bc2758
+IPv6 +Raylink/Aviator
2000-01-25 01:10:50 +00:00
04eb110431
Add "dependall" target for comfort.
2000-01-24 20:36:06 +00:00
6197c11c41
Add Raytheon Raylink driver.
2000-01-24 01:09:57 +00:00
7e5ff67457
Add commented out "ident"-command
2000-01-23 23:46:04 +00:00
87e1b0f9b7
Add overlay to kernel configs.
2000-01-20 19:12:28 +00:00
augustss