3d66460938
Add sysmon devices.
2002-03-03 18:19:02 +00:00
0d030b3347
Use a tab instead of 7 spaces.
2002-03-03 14:15:58 +00:00
681a706ec7
Change a 62 to a 16, so that the proper number of slots is skipped.
...
Fixes PR 15650.
2002-02-25 07:34:55 +00:00
8f0fa118e2
Added ttyp[g-zA-Z] (bin/15594).
2002-02-13 09:46:01 +00:00
afcd602367
Create the ulpt devices that don't reset the printer on open.
...
(I don't get this, I could have sworn I committed these files a while ago.)
2002-02-11 14:57:31 +00:00
59b84cdaa8
Fix minor mistake made while increasing number of pty devices: where we had
...
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.
2002-02-02 20:58:43 +00:00
1977a7b24e
Add support for many more (930 or 992) ptys than the current 256.
...
Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.
This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.
2002-02-02 07:04:44 +00:00
b537fda1d5
Move 'wscons' to directly after 'std'. Various MAKEDEVs had it pretty much
...
at the end, and as wscons (actually ttyE0) is required to login on the console,
it is probably better that an out of space MAKEDEV fail on some other device.
2002-01-21 16:19:17 +00:00
e474b1951e
Update the various MAKEDEV's to reflect the default of 8 RAIDframe devices.
2002-01-19 18:59:17 +00:00
eef6a7a7c6
Changed clockctl group to ntpd
2002-01-13 14:20:59 +00:00
d5767e945e
fix a couple of spelling mistakes in the i4b* descriptions
2002-01-08 02:46:10 +00:00
b83df16226
Standardize ch* and uk* descriptions.
2001-12-19 18:29:56 +00:00
864c94c933
Standardize scsibus* description.
2001-12-19 17:58:05 +00:00
44f4566e1a
Change the way kernel sets are specified, and make them
...
more consistent. To quote the comment in etc/Makefile
that describes how it's done:
# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#
2001-11-29 22:45:53 +00:00
6424a6316a
Make more USB controller devices. You can easily have 6 these days.
2001-11-15 22:16:17 +00:00
8abd9b8182
Create wsmuxN and wsmuxctlN together.
...
Use separate nodes for wsmouse and wskbd.
2001-10-29 22:50:40 +00:00
9cf0f0364b
Allow creation of wsmuxctl devices.
2001-10-13 20:20:54 +00:00
c7abdf2c7c
Added the clockctl device for macppc
2001-09-16 07:31:07 +00:00
a089a25a28
Add PCI bus devices.
2001-09-14 21:15:03 +00:00
504f009161
Add an entry to make wsmux devices.
2001-09-10 21:23:53 +00:00
4a8c7c2fed
don't prevent pty6 from creating ttyv*, since there's no custom console on ttyv
2001-05-10 01:03:03 +00:00
199da02c9f
Fix typos in comment.
2001-04-06 09:39:29 +00:00
5de642dc8a
Create [i-p] partitions too.
2001-03-18 12:57:19 +00:00
a93eaf9bc7
Add isdn devices
2001-01-08 22:26:24 +00:00
02031bda76
Add MAKEDEV support for Cyclom-Y multiport serial boards. Driver
...
support was already in $MACHINE/$MACHINE/conf.c.
2000-12-05 18:18:04 +00:00
8c16eca0e9
Add /dev/openfirm
2000-11-14 21:21:31 +00:00
517687da81
Get the major no right for uscanner.
2000-10-14 12:36:05 +00:00
8e735041d9
Prepare for USB scanners, and add Rio 500 support while messing.
2000-09-23 04:27:17 +00:00
ee4a3af175
This should be the final part of moving to 64 PTYs by default. Added
...
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.
Thanks to Matthew Green for pointing out the need.
2000-08-12 13:43:40 +00:00
db8e04e0f8
Move to a default of 64 PTYs in "all" targets. Normalize "floppy" and
...
"minimal" targets to use 16 PTYs.
2000-07-27 18:43:14 +00:00
becc493865
And let's make some audio devices too. Stolen from port-alpha.
2000-07-01 21:41:41 +00:00
01c627b9ed
Add a wd version of fstab since most macppc now are ide based
2000-06-12 23:06:59 +00:00
2ecddab632
Build GENERIC_MD too.
2000-06-12 23:04:36 +00:00
63698a2c60
Revert to decemal numbering. From talking w/ Jason, we really should
...
support more than 256 ports. That would mean 3 digits in hex, and I
don't want to write the script for that..
2000-06-09 17:58:29 +00:00
00ee1c57fc
Cyclades-Z tty's are now ttyCZ??, not ttyCZ????. Add support for them
...
to macppc's MAKEDEV.
2000-06-09 16:59:03 +00:00
8e734e6188
Make the release notes, etc.
2000-06-07 20:29:00 +00:00
dfa4c86f40
Correct cd* minor number.
2000-03-07 18:24:16 +00:00
ab5e19cc9f
Make /dev/usb, a node where USB events can be read.
...
Also add ttyU to hpcmips.
2000-02-29 19:07:41 +00:00
cac7cebd3e
- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
...
- now raw partitions are used for memory disk ioctls
2000-01-21 12:28:22 +00:00
e2c4e62e16
Correct md* entries.
1999-12-18 03:09:44 +00:00
652f0f8841
Back out previous
1999-10-18 22:41:23 +00:00
35133de28c
Add com device.
1999-10-15 12:26:07 +00:00
993ac32fff
Final chown user.group -> chown user:group changes.
1999-10-06 22:26:14 +00:00
018c7b4f42
Tidy up comments a bit, to make the manpages generated from the a bit
...
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.
1999-09-18 00:23:35 +00:00
5d7288c24d
Increase md size to 2MB.
1999-08-28 16:49:49 +00:00
bcf1e2dcad
Add a comment about ttyU*.
1999-08-27 14:13:32 +00:00
22bead680a
Define the callunit variable for ttyU*.
1999-08-27 14:10:51 +00:00
082fa5a748
Move ttyU* before tty*, otherwise it will not work to make ttyU device nodes.
1999-08-27 14:06:05 +00:00
5ca2c8ac27
Make creation of wsmux devices a little less confusing.
1999-08-25 23:06:46 +00:00
243ba7a176
Rename umodem to ttyU. If it walks like a tty and quacks like a tty
...
it's a tty.
1999-08-17 20:06:57 +00:00
nathanw