0800aaa223
Move the `wdc' device into `conf/files'.
1998-11-22 21:57:47 +00:00
bc98f448b8
Turn the passed tag into "used" arguments.
1998-11-22 21:52:24 +00:00
82fe9b4f90
The last fix in trap.c missed R2.
...
And correct the size of the fault buffer while being here.
1998-11-22 21:21:32 +00:00
32dd1a1d5a
Make sure the Endpoint Descriptor gets the correct maximum packet size.
1998-11-22 20:21:22 +00:00
3bb71e68c6
ofwboot.elf is now ofwboot.
1998-11-22 17:22:50 +00:00
2f274f97e5
Don't ask the firmware to find our partition because it doesn't understand
...
NetBSD disklabels and gets horribly confused.
1998-11-22 16:21:02 +00:00
01a2fb8424
Fix typo.
1998-11-22 15:57:37 +00:00
dd377fd943
Remove erroneous duplicate lines in cdev_sw[]. Now things are lined
...
up right and RAIDframe can find it's block device again.
1998-11-22 15:51:04 +00:00
1c0cc94837
Update for INT13 support.
...
XXX We can't easily emulate this here due to the 16-bit-pointer
call interface.
1998-11-22 15:44:03 +00:00
78db9d7d95
merge ipf 3.2.10
1998-11-22 15:17:18 +00:00
c48ea35c91
include missing SYSV option header - PR kern/6479 by Urban Boquist
1998-11-22 15:00:47 +00:00
1e2b2f29f2
one more (last?) wdc_channels adaption
1998-11-22 14:55:29 +00:00
d3224441a0
merge ipf 3.2.10
1998-11-22 14:41:29 +00:00
e1244719fd
oops - forget update for wdc_channels definition change
1998-11-22 14:36:38 +00:00
a8e48ccd6e
Fix RAIDframe typo. (Reported by msaitoh@netbsd.org)
1998-11-21 23:41:13 +00:00
c312dc3f08
Avoid looping forever with cards that can only use one I/O address,
...
and specify a 0 alignment.
1998-11-21 23:38:11 +00:00
28b6542336
Fix misplaced comma...
1998-11-21 20:37:06 +00:00
491966b273
When DSI occurs and pcb_onfault != 0, registers are incorrectly restored.
...
Fix this.
1998-11-21 20:18:47 +00:00
c73add02ca
Fix some typos.
1998-11-21 18:57:09 +00:00
152d52c171
headers for new hardware support in pciide.c. from Manuel.
1998-11-21 16:06:45 +00:00
9effbbe436
some restructuring, more or less to get support for weird IDE controllers,
...
eg the Cypress ISA bridge:
-put channel mapping into the chip specific part, unify with
channel_probe() into channel_map()
-use pointer to channel data as function call argument wherever possible
instead of the channel number
-allow the "compat" channel number to differ from the per-controller
channel number - for mapping and interrupt functions
-add support for SiS5598 and Cypress 82C693 chips
Mostly done by Manuel, I only contributed to the first 2 items.
1998-11-21 15:55:31 +00:00
3e38051bc5
in wdc_softc: access the per-channel data via a pointer array instead of
...
an array of fixed-sized channel_softc elements. This way IDE controllers
which more than 1 channel (pciide) can extend the channel data easily
for private needs.
To avoid the double dereference at runtime, change the argument of
wdcstart() to the channel data pointer instead of the array index.
1998-11-21 15:41:41 +00:00
13a8c73bb6
Flush write buffer in ZS_DELAY().
1998-11-21 14:57:59 +00:00
cc2f45083b
update outdated an_swslot comments
1998-11-20 19:37:06 +00:00
7e21eb25d4
Set the p-v list head to NULL if there are no valid mappings.
...
This should be not necessary because the pv_pmap member is already set to
NULL in this case which should keep the pv_next pointer from being
followed. However, PR port-i386/5291 reports that this measure helps in
at least one case (VINO).
Reviewed by Chuck Cranor, final fix is functionally identical to the PR's
proposal.
1998-11-20 17:44:39 +00:00
c9971df573
Follow the amiga vmparam.h, from Ignatios:
...
Yet another workaround for pmap bugs. Several reports on the port-amiga
list claim this helps with some big-machine situations.
1998-11-20 13:01:12 +00:00
b981000a00
If the disklabel on the floppy says that there are more tracks and sectors
...
than the hardware is capable off, believe the hardware...
1998-11-20 12:58:13 +00:00
6827fd2ff0
Checkpoint my work on et6000 support.
1998-11-20 12:56:09 +00:00
396634e8c7
Adapt to new wd world-order.
1998-11-20 12:54:37 +00:00
d8b37265bc
Fix parameters of uvm_unmap().
1998-11-20 12:48:13 +00:00
c852714bf9
Make it compile with -DDEBUG again.
1998-11-20 12:46:51 +00:00
394afce1c9
NWDC -> NWD (wdc.h -> wd.h)
1998-11-20 12:43:11 +00:00
45d30cea9d
Sync with GENERIC.
1998-11-20 11:50:29 +00:00
6fca929d87
Moved the manual to share.
...
Added -L for libc.
Use `&&' instead of `;' for cd and print-objdir in order to avoid
infinite fork() if chdir failed.
1998-11-20 10:59:22 +00:00
475a5c2afd
RZ25 disks seem to need a short delay after a start command; the test unit
...
ready right afterward succeeds, but the getsize following that failed with
a "not ready".
1998-11-20 06:24:02 +00:00
7693f53714
Detach children in reverse order. We are more likely to be able to recycle
...
cloned unit numbers that way.
1998-11-20 05:20:20 +00:00
ba30effcf8
Changes to support a HIPPI Framing Protocol device, which allows raw
...
HIPPI packets to be written without having to go through the network
stack.
1998-11-20 04:12:57 +00:00
8d957efade
Sigh, shuffle the nsio ide frobber yet again.
1998-11-20 03:58:22 +00:00
8c2f638d29
Add support for power management and lazy interrupt establishment to the
...
PCMCIA aic6360 attachment.
1998-11-20 02:12:15 +00:00
792462c236
Add support for power management and lazy interrupt establishment
...
to PCMCIA IDE controllers (include PCMCIA flash cards).
1998-11-20 01:52:22 +00:00
d0a4fb616f
Implement controller reference counting on ATA devices.
1998-11-20 01:23:52 +00:00
4ba3417429
Implement reference counting for ATA adapters.
1998-11-20 01:22:37 +00:00
6a60e078ee
Add adapter reference counting for SCSI and ATAPI devices.
1998-11-20 00:35:39 +00:00
510830d2c3
Rename WDCIOCCOMMAND (and related structures) to ATAIOCCOMMAND
1998-11-19 23:44:20 +00:00
5a79273062
Rename wdcio->ataio.h, as per ICB cabal discussion.
1998-11-19 23:41:09 +00:00
396aa17f77
Sigh, my bad. Check for chp->wdc being NULL before trying to deference it.
...
(I didn't realize the ISA wdc front-end doesn't fill in chp->wdc).
1998-11-19 22:50:21 +00:00
baec89716d
Add a reference to the adapter when the scsibus is opened, and delete it
...
when it is closed.
1998-11-19 22:28:20 +00:00
54b52fb5f6
Add a reference to the adapter before probing the bus, and delete it
...
once we are done probing.
1998-11-19 22:25:56 +00:00
3b068a6c78
Adapt to the new scsipi_adapter interface.
1998-11-19 21:53:32 +00:00
5f0577babc
Adapt to the new scsipi_adapter interface.
1998-11-19 21:43:00 +00:00
pk