chgsbsize() as mentioned in the PR can be called from an interrupt context
via tcp_close(). Avoid calling uid_find() in chgsbsize().
- Instead of storing so_uid in struct socketvar, store *so_uidinfo
- Add a simple lock to struct uidinfo.
This does an #if 0 / #endif, so that no code (or declarations!) are
left after the first "return 1", making this compilable for vax and
playsation2 again, both of which use gcc 2.95.3 or similar.
* For sparc64 and amd64, define *SIZ32 VM constants.
* Add a new function pointer to struct emul, pointing at a function
that will return the default VM map address. The default function
is uvm_map_defaultaddr, which just uses the VM_DEFAULT_ADDRESS
macro. This gives emulations control over the default map address,
and allows things to be mapped at the right address (in 32bit range)
for COMPAT_NETBSD32.
* Add code to adjust the data and stack limits when a COMPAT_NETBSD32
or COMPAT_SVR4_32 binary is executed.
* Don't use USRSTACK in kern_resource.c, use p_vmspace->vm_minsaddr
instead (emulations might have set it differently)
* Since this changes struct emul, bump kernel version to 3.99.2
Tested on amd64, compile-tested on sparc64.
for multiple things (proccnt,lockcnt,sbsize) and it adds too much code
complexity. Instead add a uid_find() routine that returns the existing
struct or allocates a new one.
Re-enable the sbsize limit code.
a proclist and call the specified function for each of them.
primarily to fix a procfs locking problem, but i think that it's useful for
others as well.
while i'm here, introduce PROCLIST_FOREACH macro, which is similar to
LIST_FOREACH but skips marker entries which are used by proclist_foreach_call.
and unkillable processes.
1. Introduce new SBSIZE resource limit from FreeBSD to limit socket buffer
size resource.
2. make sokvareserve interruptible, so processes ltsleeping on it can be
killed.
would be good) mostly copied from sysctl(3). This takes care of the
top-level, most of kern.* and hw.* (modulo the ath and bge stuff), and
all of proc.*.
If you don't want the added rodata in your kernel, use "options
SYSCTL_NO_DESCR" in your kernel config.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
and make the stack and heap non-executable by default. the changes
fall into two basic catagories:
- pmap and trap-handler changes. these are all MD:
= alpha: we already track per-page execute permission with the (software)
PG_EXEC bit, so just have the trap handler pay attention to it.
= i386: use a new GDT segment for %cs for processes that have no
executable mappings above a certain threshold (currently the
bottom of the stack). track per-page execute permission with
the last unused PTE bit.
= powerpc/ibm4xx: just use the hardware exec bit.
= powerpc/oea: we already track per-page exec bits, but the hardware only
implements non-exec mappings at the segment level. so track the
number of executable mappings in each segment and turn on the no-exec
segment bit iff the count is 0. adjust the trap handler to deal.
= sparc (sun4m): fix our use of the hardware protection bits.
fix the trap handler to recognize text faults.
= sparc64: split the existing unified TSB into data and instruction TSBs,
and only load TTEs into the appropriate TSB(s) for the permissions.
fix the trap handler to check for execute permission.
= not yet implemented: amd64, hppa, sh5
- changes in all the emulations that put a signal trampoline on the stack.
instead, we now put the trampoline into a uvm_aobj and map that into
the process separately.
originally from openbsd, adapted for netbsd by me.
* return EINVAL if specified current limit exceeds specified hard limit.
This behaviour is required by SUSv2 (noted by Giles Lean on tech-kern)
* return EINVAL if an attempt is made to lower stack size limit below
current usage; this addresses bin/3045 by Jason Thorpe, and conforms to SUSv2
in the non-MULTIPROCESSOR case (LOCKDEBUG requires it). Scheduler
lock is held upon entry to mi_switch() and cpu_switch(), and
cpu_switch() releases the lock before returning.
Largely from Bill Sommerfeld, with some minor bug fixes and
machine-dependent code hacking from me.
p_cpu member to struct proc. Use this in certain places when
accessing scheduler state, etc. For the single-processor case,
just initialize p_cpu in fork1() to avoid having to set it in the
low-level context switch code on platforms which will never have
multiprocessing.
While I'm here, comment a few places where there are known issues
for the SMP implementation.
state into global and per-CPU scheduler state:
- Global state: sched_qs (run queues), sched_whichqs (bitmap
of non-empty run queues), sched_slpque (sleep queues).
NOTE: These may collectively move into a struct schedstate
at some point in the future.
- Per-CPU state, struct schedstate_percpu: spc_runtime
(time process on this CPU started running), spc_flags
(replaces struct proc's p_schedflags), and
spc_curpriority (usrpri of processes on this CPU).
- Every platform must now supply a struct cpu_info and
a curcpu() macro. Simplify existing cpu_info declarations
where appropriate.
- All references to per-CPU scheduler state now made through
curcpu(). NOTE: this will likely be adjusted in the future
after further changes to struct proc are made.
Tested on i386 and Alpha. Changes are mostly mechanical, but apologies
in advance if it doesn't compile on a particular platform.
which indicates that the process is actually running on a
processor. Test against SONPROC as appropriate rather than
combinations of SRUN and curproc. Update all context switch code
to properly set SONPROC when the process becomes the current
process on the CPU.
core filename format, which allow to change the name of the core dump,
and to relocate it in a directory. Credits to Bill Sommerfeld for giving me
the idea :)
The default core filename format can be changed by options DEFCORENAME and/or
kern.defcorename
Create a new sysctl tree, proc, which holds per-process values (for now
the corename format, and resources limits). Process is designed by its pid
at the second level name. These values are inherited on fork, and the corename
fomat is reset to defcorename on suid/sgid exec.
Create a p_sugid() function, to take appropriate actions on suid/sgid
exec (for now set the P_SUGID flag and reset the per-proc corename).
Adjust dosetrlimit() to allow changing limits of one proc by another, with
credential controls.
calls to reflect this. Also, block statclock rather than softclock during
in the proclist locking functions, to address a problem reported on
current-users by Sean Doran.
