2ade80fac8
A fraglist entry struct must be packed, to make installboot dtrt on amd64.
2003-05-08 23:09:30 +00:00
9dbe78f136
This is a host program. Don't use errx.
2003-05-08 13:42:17 +00:00
94cad743e8
Use ${MACHINE} when generating the version string, not plain 'i386'.
2003-05-05 20:49:10 +00:00
76a6e18152
use nm(1) to output decimal values immediately, instead of relying on a
...
(non-working) sh(1) construct.
Reviewed by simonb & bjh21.
2003-05-05 13:38:23 +00:00
3359b0ac58
force nm addresses in hex and add 0x prefix before handing numerical
...
expression to the shell.
2003-05-05 02:47:42 +00:00
83fa31ab4c
be consistent with other Makefiles here and invoke "rm -f" separately to ln -s
2003-05-04 06:32:39 +00:00
1d22d3e3ca
replace "ln -sf .... $@" with "rm -f $@ && ln -s .... $@"
...
since the latter works correctly ...
2003-05-04 06:25:10 +00:00
91ccfbdaab
Clean up machine include dir handling a tad.
2003-05-03 17:54:21 +00:00
cbcf556e10
Build mbr code here (instead of in sbin/fdisk/mbr)
2003-04-30 19:52:17 +00:00
798f520353
Set BFL_NEWMBR flag so that fdisk can differenciate between new and old mbr code.
2003-04-29 10:24:24 +00:00
b40733ee1b
Master Boot Record (mbr) code:
...
mbr: boots active partition
mbr_bootsel: menu selection for partitions 1 to 4
mbr_ext: menu selection for partitions 1 to 4 and extended partitions
Based on code from sbin/fdisk/mbr_bootsel.
Needs a new fdisk to configure mbr_ext and correctly set default menu selection.(Not yet built by defaulat)
2003-04-28 12:19:05 +00:00
043f21d9ea
x86_64 -> amd64
2003-04-26 19:14:17 +00:00
caaaf66e32
x86_64 -> amd64
2003-04-26 19:13:37 +00:00
82d4d158d2
Missing end of comment
2003-04-24 17:41:03 +00:00
c9a0a49ac7
Don't use ENTRY - it aligns the label and we can't afford the space.
...
Adjust coding to save 2 more bytes (assume 'D' flag clear - it is)
2003-04-24 17:40:32 +00:00
cf4ada7934
Fix code that scans extended partition list
2003-04-24 17:37:54 +00:00
60c3e62a42
Add files for 2nd stage boot loader
2003-04-16 22:36:14 +00:00
b10e65e490
Uncomment line that deletes tempory file
2003-04-16 22:34:00 +00:00
415cb92c98
Add functions needed by new boot code
2003-04-16 22:30:40 +00:00
2737b135d5
bootxx: bootstrap code - installable by MI installboot.
...
Loads /boot using filesystem accesses (rather than a list of block numbers)
2003-04-16 22:27:35 +00:00
eb2692a8d2
bootxx: bootstrap code - installable by MI installboot.
...
Loads /boot using filesystem accesses (rather than a list of block numbers)
2003-04-16 22:16:36 +00:00
fe778b7b70
Remove definition of LIBSA_SUPPORT_UFS2, the source will only build separate
...
ufsv1 and ufsv2 objects (the merged one was too large for the code that only
supported a single fs type).
2003-04-16 19:03:33 +00:00
586810c59b
Routines to switch between 16bit real and 32bit protected modes
2003-04-16 17:38:43 +00:00
0c5af93233
Add some debug prints to the memory size code
2003-04-16 15:03:59 +00:00
cb61d88cb5
Add baud_rate arg to cominit_d
2003-04-16 14:58:32 +00:00
e60ac53619
Modify baud rate handling to make it easier to take it from a variable.
...
Default to 9600 if the requested baud rate is illegal.
2003-04-16 14:56:55 +00:00
d5b5933e8c
remove unused defines
2003-04-16 14:23:11 +00:00
616c6baa61
Add code to parse V3.x bios disk information.
...
This should let NetBSD guarantee to tie together the bios disk numbers
with the physical hardware.
#defined out because I don't have a system with a bios that supports it.
2003-04-16 14:22:29 +00:00
621f25533d
Add cvs version, delete unused definition
2003-04-16 13:49:21 +00:00
2ae46742a2
Add prototyps for all the asm bios/dos calls
2003-04-16 13:47:53 +00:00
4cf0478777
additional support routines for boot code
2003-04-16 13:24:09 +00:00
1d68743dfc
C code now sets length of disk info structure
2003-04-16 12:45:10 +00:00
7119639d07
used daddr_t for disk block numbers,
...
add definitions for v2 and v3 disk info structures
2003-04-16 12:43:45 +00:00
fd18f39232
Use daddr_t for disk block numbers,
...
Set size of extended disk info structure in the C code
2003-04-16 12:41:03 +00:00
225615a61a
avoid calling toupper with posibly -ve value. fixes PR 21171
2003-04-14 11:33:40 +00:00
243bb03c7c
Explicitly specify both ffsv1 and ffsv2
2003-04-11 11:36:28 +00:00
42614ed3f3
Add support for UFS2. UFS2 is an enhanced FFS, adding support for
...
64 bit block pointers, extended attribute storage, and a few
other things.
This commit does not yet include the code to manipulate the extended
storage (for e.g. ACLs), this will be done later.
Originally written by Kirk McKusick and Network Associates Laboratories for
FreeBSD.
2003-04-02 10:39:19 +00:00
d35a2d2955
Add -DSLOW to reduce the size of libz a bit.
2003-04-01 21:25:34 +00:00
96f88c853c
Trivial const poisoning.
2003-04-01 21:10:45 +00:00
11d8ce0e4e
catch up with constification in sys/lib/libsa/nfs.c
2003-03-19 17:27:43 +00:00
6b8fef6400
cleanup, delete declarations now in libsa/iodesc.h
2003-03-13 16:02:39 +00:00
9b72b507ef
-use our own netif layer
...
-call the pxe unload function only on close(), not on open() errors,
so we have a chance to retry
-remove some remaining references to NFS
2003-03-12 17:35:57 +00:00
168322ea77
kick out mi libsa/netif.c references
2003-03-12 17:33:55 +00:00
542ccfb0d5
Kick out the netif layer from mi libsa and implement an own, smaller, one
...
(we really don't need to support multiple interfaces)
Also arrange things so that we are able to unload the PXE stacks only
when we are sure that we don't need them anymore. (To make this more
useful, a hook in exec() is needed.
2003-03-12 17:33:10 +00:00
1ebc8c2dbd
cleanup:
...
-update comments
-remove remaining references to "bootparam"
-don't try to interpret extra arguments to net_open() - we
get only passed a NULL anyway (see devopen.c)
2003-03-12 13:15:08 +00:00
c693137139
sync with mi libsa/nfs.c (with the intent to replace it eventually):
...
-kill "register" attributes
-obey "LIBSA_NO_TWIDDLE"
-ignore leading "/" also in the NFS_NOSYMLINK case
2003-03-12 12:23:06 +00:00
a82c138b1c
If we get passed a filename (from the command line or default "netbsd"),
...
pass it to the BOOTP server in the "filename" field.
(as the "netboot" bootROMs already did)
So the user can easily switch between different kernels/configurations.
2003-03-11 18:32:59 +00:00
dd15fa8102
Fix bug in readudp(): we have to return the correct length
...
of the received packet to the caller.
TFTP works now.
2003-03-11 18:29:00 +00:00
df62259ae1
kick out RARP/bootparam - PXE uses BOOTP anyway
2003-03-11 16:30:02 +00:00
ff28ac27ec
use our own NFS fs implementation, which is smaller, does a better job
...
in error reporting and coexists with the TFTP fs
2003-03-11 15:01:51 +00:00
8e04272b51
add prototypes for local functions
2003-03-11 14:38:45 +00:00
f8f0dcfd17
Need .code32 after real_to_prot (not .code16)
2003-03-11 12:37:35 +00:00
a6fda7bcfb
create a symlink so that eg <x86/trap.h> is found
2003-03-11 11:03:23 +00:00
8a6f95626f
Avoid pulling strncpy() into minimal boot code
2003-03-08 21:30:59 +00:00
ef18027d4d
Don't trust %bp to point to same place in real and protected modes.
...
prot_to_real preserves %ebp but changes %ss and %sp.
(ok if real %ss is offset n*64k from protected %ss - which it has been)
2003-03-08 21:09:37 +00:00
c03626b07b
Change "i386_trunc_page" to "x86_trunc_page".
2003-02-27 12:22:52 +00:00
9474297c7f
Clear 'big' bit of segment registers before returning to real mode.
2003-02-25 11:17:36 +00:00
4552b31f45
Clear 'big' bit of descriptors (%ss in particular) before switching to
...
16bit mode. Otherwise the 32bit %esp and (probably) %ebp are used for
stack accesses. (stupid cpu design!)
(approved by christos)
2003-02-24 23:23:14 +00:00
a5781fdcdf
Add LFS support for i386. Tested with a "newfs_lfs -A -O 256" root
...
filesystem.
2003-02-23 23:25:50 +00:00
673612c6a0
Use correct segment register in getmementry
2003-02-14 14:39:24 +00:00
53d3dabb6a
Use on-stack buffer to check for 2.88MB floppy, malloc() hasn't been
...
loaded when this is called.
Clearly the information is actually available from the bios.
(Approved by christos)
2003-02-07 00:46:08 +00:00
bfd68d9702
Change to use .codw16/32 and ensure buffer address <64k
...
(approved by christos)
2003-02-05 21:50:25 +00:00
d77171664a
A buffer slipped though the net... Ensure offset < 64k.
...
(approved by christos)
2003-02-05 21:48:53 +00:00
7db25b39f8
Remove unused defines
2003-02-05 21:41:51 +00:00
f6909b984b
Revert my last change. While it actually allows a build to finish,
...
an iso-image created from the resulting release won't boot. I don't
know if this change is the source of that, but one more knowledgable
than I about the x86 booter needs to look at this, and I don't want
the waters muddied any more than necessary.
2003-02-03 03:03:16 +00:00
c6b14f1ca4
Add CPPFLAGS+= -D__daddr_t=int32_t.
2003-02-03 00:08:30 +00:00
a3b6bf84d6
Increase MAXFLENTRIES - the limit is being hit on some systems.
...
(approved by christos)
2003-02-02 21:08:55 +00:00
bf6f586096
Change comments to refer to increased default number of fragments
...
(approved by christos)
2003-02-02 21:05:15 +00:00
81acacd723
Change all .S files to use .code16 and .code32
...
Support 32bit addresses >64k as valid on bios calls.
Move stack for dosboot and biosboot to >64 so stack doesn't hit data.
Use disk sector number passed by mbr code to select default partition
(the mbr code doesn't do this yet).
NB only biosboot and dosboot have been tested so far.
(changes approved by christos and fvdl)
2003-02-01 14:48:16 +00:00
1ae2ac239d
Make the ld workaround work on x88_64, and add the temporary ld script
...
to CLEANFILES.
2003-01-29 18:44:47 +00:00
00706969a9
Remove the 4k between code and data to increase the stack space.
...
Support for 64bit disk blocks seems to have exploded the code.
2003-01-28 16:21:58 +00:00
a3ff3a3038
Bump daddr_t to 64 bits. Replace it with int32_t in all places where
...
it was used on-disk, so that on-disk formats remain the same.
Remove ufs_daddr_t and ufs_lbn_t for the time being.
2003-01-24 21:55:02 +00:00
31fcb050d5
add another memory size detection routine, using int15, function 0xc7, which
...
is supported on later IBM PS/2 models; this is necessary to detect memory
over 64MB
thanks go to Pavel Cahyna for testing on his IBM PS/2 machine with 128MB
bump biosboot version to 2.15
2003-01-23 21:22:24 +00:00
1323e01ddf
use %e?x instead of %?x as 'xorl' arguments
...
use %al for 'movb' target, and 'andb' for masking the result with $0x02
since 'and' conveniently sets ZF, use 'and+jnz' instead of 'and+cmp+jne'
2003-01-23 21:01:18 +00:00
c8763685b7
Allow the serial console boot blocks to be built with a specific
...
console speed, and build some of the more common ones.
2003-01-14 23:53:30 +00:00
f6f0dbd011
Stub out LIBCRT0, LIBCRTBEGIN, LIBCRTEND, and LIBC.
2003-01-14 23:51:34 +00:00
a250e57c96
Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
...
"${RELEASEDIR}/...".
${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.
2003-01-03 15:34:30 +00:00
6227201ba9
If booting from floppy in 2.88MB drive, actually test if it's possible
...
to read sector 18, and fallback to 1.44MB drive geometry if that fails.
This allows to boot from 1.44MB floppy disk in 2.88MB drive.
Tested with 2.88MB drive in IBM PS/2 model 95 donated
by 'Yokotashi' <lhc at kanal ucw cz> and Pavel Cahyna
<pavel.cahyna at st ms mff cuni cz>
Bump biosboot version.
Fixes PR kern/3418 by Keith Moore.
Change okayed by Frank van den Linden.
2002-12-04 18:26:56 +00:00
1847a76b62
use NOMAN instead of MKMAN=no. noted by David Bonnafous on port-i386@
2002-11-24 23:48:48 +00:00
79f52ea3a8
Some hacks to make this compile on x86_64.
2002-11-23 23:34:39 +00:00
e57ba8d648
Introduce biosdiskreset(), and call it to reset the disk (with Int
...
0x13 Function 0) after a read error. This is a requirement mentioned
in most BIOS documentation.
This answers PR 18591.
Incidentally, on the Soekris Engineering net45x1 single-board
computer, this fixes a bug where the bootloader corrupts the kernel
while loading it from certain varieties of CompactFlash card
(especially varieties identified by NetBSD as <TOSHIBA THNCF064MBA>).
2002-10-10 18:52:42 +00:00
ed2badbd21
make vers.c depend on ${SOURCES} and remove .PHONY tag for it, so that it
...
would only be regenerated if any of the input files changed
2002-09-02 07:33:11 +00:00
fb7bc8541e
arch/*/stand stuff should be LDSTATIC=-static and not LDSTATIC?=-static.
...
It doesn't make sense to have standalone stuff dynamically linked just
because an end-user uses LDSTATIC="".
2002-08-27 08:53:14 +00:00
4b8b317d4b
There are other systems besides the PS/2 L40 that enable A20
...
via the Configuration Port, so restructure the code a little
to allow for them, and list at least one other system that does
(anything based on AMD Elan SC520).
XXX We don't actually check for Elan SC520 yet.
2002-08-12 14:27:34 +00:00
6742cb1812
sweep of errx/warnx, remove unnecessary trailing \n
2002-07-20 08:36:17 +00:00
c558b464ba
Assign COPTS instead of adding to it, avoids situation where -mi386
...
is mixed with -march=something_incompatible
suggested by thorpej
2002-06-27 20:44:08 +00:00
02ca40e27f
Make this compile with NETIF_DEBUG.
2002-06-21 23:18:45 +00:00
937b671271
use exit(int), not exit(void), consistently - even if the arg has no meaning.
2002-06-01 11:40:31 +00:00
28afbb384c
Build with -ffreestanding.
2002-05-31 18:26:26 +00:00
d2a97e2196
_C_LABEL() police
2002-05-10 23:21:17 +00:00
43df8ed28f
Add host-OS tools for i386, which end up in the "installation/misc"
...
directory of the release tree.
2002-04-12 23:11:58 +00:00
4081bcf395
Add (missing)pushl/popl for %edi in ENTRY(pxecall_pxenv).
2002-03-27 17:24:22 +00:00
e42f3e3081
Change scan step from 16 to 2, when pxe_init() check the presence of PXE.
...
This change improve checking the presence of PXE.
2002-03-26 08:02:05 +00:00
3ed7e33e1d
Add commented-out default definitions for BASEREG and BASEMEM.
2002-03-23 03:45:04 +00:00
c0d66944db
Make sure we override any optimization options specified by the
...
user; the boot blocks don't work when built with e.g. -mcpu=i486
(probably due to how branches are aligned in that case, causing
segment boundaries to be crossed).
2002-03-19 22:03:37 +00:00
ca1294612c
Remove some globals defined in libsa.
2002-02-24 01:51:04 +00:00
f777763ab3
* Rename the pxeboot binary from "pxeboot" to "pxeboot_ia32", since
...
there are other architectures (e.g. IA64) which also use PXE.
* Get the console right in pxeboot, from Andreas Gustafsson.
* Add a "com0" version of pxeboot, to address the same issue that
biosboot_com0 addresses.
2002-02-20 03:00:27 +00:00
825d4ec152
Increase the reset delay in ex_reset() as per dev/ic/elinkxl.c
...
Pointed out by Love <lha@stacken.kth.se>
2002-02-19 20:38:28 +00:00
dfeaa108c4
Add some comments to make some #if/#else/#endif's more clear.
2002-02-19 20:18:36 +00:00
8545d4115b
Put the netif driver name in the version banner.
2002-02-19 19:55:01 +00:00
1ecb20dd3b
Move the individual NIC ROM Makefiles into a subdirectories of
...
netboot. Requested by Christos.
2002-02-19 19:49:37 +00:00
bf6823b1b5
Don't ask bootp() to put a "PXEClient" Vendor Class Identifier option
...
in the DHCP request.
2002-02-18 17:01:46 +00:00
77fa5a7974
Pay attention to the file name provided by the DHCP server, using
...
it rather than the default of "netbsd" if it's in the reply.
2002-02-17 20:14:08 +00:00
76ea45942b
Cleanup of i386 bootloader building:
...
* Add separate directories for the individual netboot ROMs and
always build them.
* Each bootloader Makefile explicitly specifies the start file
and link address it wishes to use.
* genprom becomes a proper host program.
* Make sure all generated files get cleaned up.
* Set BINDIR in Makefile.inc
* Add compressed image support to pxeboot.
* Make pxeboot use the default serial console speed (9600).
2002-02-17 20:03:05 +00:00
45f23105c2
Make this compile again (update for changes to register bit names).
2002-02-17 19:49:58 +00:00
bb1c9c42fa
Update for new location of the WD80x3 register description.
2002-02-17 19:47:41 +00:00
49cec2b141
* Remove a debug-breakpoint that is no longer needed.
...
* Move the pxe_init() call to when we open the virtual netif.
* Make sure to call pxe_fini() when we close the virtual netif.
2002-02-16 16:52:10 +00:00
0aec9f6508
Need private copies of these files for now.
2002-02-16 16:26:23 +00:00
8bb2be2987
Add a PXE boot loader. PXE interface code is derived by code
...
written by Alfred Perlstein, Paul Saab, John Baldwin for FreeBSD.
Still needs some work, but this will load a kernel on a Soekris net4501.
Many thanks to Frank van der Linden and his simulator wizardry for
helping me debug the low-level startup code.
2002-02-16 03:37:39 +00:00
fe2fc5699c
Fix the bcea redefinition issue in a different way: instead
...
of removing the duplicate variables, make sure that any duplicate
variable that has an initial value in libsa also has an initial
value here; this keeps the linker from pulling in the libsa
definition.
2002-02-02 18:53:12 +00:00
11111119ae
Make receiving packets work again after struct fxp_rfa grew.
2002-01-24 02:52:15 +00:00
d4da6dc52d
Debug printf within #if 0..#endif did not compile if enabled.
2002-01-24 02:44:11 +00:00
69ba1e26ce
Remove duplicate definition of global variable bcea which caused
...
linking to fail, along with other globals already
defined in lib/sa/globals.c
2002-01-24 02:37:53 +00:00
b0b0a32ad7
Set NOxxx= before <bsd.own.mk> is pulled in (even indirectly).
...
Otherwise the appropriate MKxxx=no won't be defined .
2001-12-12 12:24:19 +00:00
8e6f7afb5b
MKfoo=no -> NOfoo
2001-12-12 01:48:43 +00:00
5ac54229c9
Don't make the symlinks on clean rules as well as obj rules. Breaks r/o source
...
trees that haven't gotten to the make obj recursion part of make build
otherwise.
2001-11-22 00:14:20 +00:00
3bad9b1f33
Repeat James Chacon's fix from sys/lib/lib{kern,sa,z}:
...
Don't make clean and cleandir depend on the lib subdir.
Just check for it's existance before running the submake.
This makes it possible to run a make build (which runs
cleandir before make obj) in a r/o source tree.
2001-11-22 00:04:55 +00:00
48c09b6243
Work around <bsd.lib.mk> used for kernel libs in other places. Clean up
...
include paths.
2001-11-14 23:01:13 +00:00
45e7238a02
Bump the version numbers of all bootloaders which use loadfile_elfXX() now
...
that it tries hard to avoid backwards seeks.
2001-11-09 19:53:11 +00:00
5fa0dfa754
use biosdelay instead of adhoc loop.
2001-11-07 08:46:24 +00:00
7a6b533ba6
add btinfo stuff.
2001-11-03 12:02:28 +00:00
375b263ebc
- remove debug printf.
...
- reset the board in EtherStop.
2001-11-03 09:36:47 +00:00
b7574e5c56
add settings for ne2000.
...
(commented out)
2001-11-01 09:45:03 +00:00
3492b7a4c6
add ne2000 standalone driver.
2001-11-01 09:37:17 +00:00
66f972ab70
Need byteorder.c for loadfile_elf*.c
2001-10-31 21:39:02 +00:00
4810d73020
Build the loadfile() a.out, ECOFF, and ELF back-ends as separate
...
objects.
2001-10-31 01:51:42 +00:00
60263432a6
Add the fact that SRCS depends on machine. This way the link is always created
...
Otherwise trying to do make installboot.o will fail
2001-10-04 04:15:17 +00:00
806aee01eb
Don't force CFLAGS to -g for all builds.
2001-09-30 23:02:25 +00:00
9b9300274d
GCC 2.95 generates significantly larger code with -O2 than our old compiler did; this can cause the second-stage bootblock to exceed the number of blocks that fit in the list in the first-stage bootblock. I thought we used to explicitly set -Os in here; anyway, with this change, we do now!
2001-09-23 23:43:29 +00:00
ab11c169b5
objcopy -> ${OBJCOPY}; remove redundant definitions of OBJCOPY?= (it is
...
now in bsd.own.mk).
2001-09-22 03:34:17 +00:00
d0b8cdc6a9
When using va_list, use vprintf, not printf.
2001-09-20 22:11:30 +00:00
b605664b49
Include bsd.own.mk a bit earlier so that make cleandir works.
2001-08-18 12:53:58 +00:00
cebeb402de
Fix white space usage.
2001-08-18 12:48:59 +00:00
ad2c12a28d
Bump version numbers of all bootloaders that use loadfile/ELF, to account for
...
my changes to symbol loading. I should probably have done this at the time,
but it's better late than never.
2001-08-02 12:24:05 +00:00
23204e4b5f
document 3c90xb support
...
use default settings which make more sense (for me)
2001-07-25 12:51:44 +00:00
a3cdd518ad
make it compile after i82557reg.h changes
2001-07-25 12:47:34 +00:00
c3748d9175
b*()->mem*()
2001-07-07 22:57:57 +00:00
1e8074db2e
sort boot flag to alphabetical order. add -c.
2001-07-05 00:58:45 +00:00
882f3b1bd2
Const'ify bootblk_commands[] to match lib/libi386.h change.
2001-06-27 22:58:32 +00:00
4db9600c94
use hd0a instead sd0a in 'help' command example
2001-06-02 14:56:13 +00:00
b001ce9b90
g/c COMPAT_OLDBOOT from bootblocks, sprinkle some const
...
bump bootblock version to 2.10
2001-06-01 23:26:30 +00:00
e3daef46ec
Add some IBM PS/2 support bits:
...
* recognize PS/2 L40 via biosmca() and biosmca_ps2model in gatea20.c, instead
of being a compile time option
* if the system is PS/2 with MCA bus, map DTYPE_ESDI disks to ed(4) for
COMPAT_OLDBOOT
The new code is conditional on SUPPORT_PS2 define, which is on by default
for biosboot-based bootblocks.
2001-05-19 18:15:14 +00:00
2a7ff4a9ab
Add biosmca.S if I386_INCLUDE_PS2 variable is "yes" (default, overridable)
2001-05-19 17:53:30 +00:00
a97bf5e6b4
Change biosmca() to export the model number via biosmca_ps2model
...
variable, if the machine has a MCA bus according to info returned
by BIOS (i.e. on machines without MCA bus, biosmca_ps2model would be zero).
biosmca() is expected to be called on beginning the initialization,
and biosmca_ps2model is then used for further checks.
2001-05-14 22:14:47 +00:00
7cb5602067
Nuke biosboot_ps2
2001-05-02 13:43:10 +00:00
7e111aa959
Add function which uses bios call to get system configuration; this can
...
be used for presence of MCA bus, if ever needed to be done in bootblocks.
Not used at the moment, but may be in future.
2001-05-02 13:41:07 +00:00
267271c1b2
Explain some SA_* options - reading compressed kernels, netboot
...
Useful for stripping down bootcode.
2001-03-31 09:45:11 +00:00
7c2615290b
Add support for MS-DOS file system, but don't enable it by
...
default -- the resulting binary is too large, and thus does
not work.
2000-11-02 01:02:07 +00:00
b14a596beb
Add support for booting off RAIDframe RAID1 mirrors. Check the first partition
...
type in biosdiskopen(), and if it is of type FS_RAID, add 64 to d->b_off.
NOTE: installboot(8) still needs some hacking to DTRT, but at least this way
if you can load "/boot" off another partition (e.g, wd0h), then wd0a can be
of type `RAID' with a raidframe mirror at the start and the kernel
will load OK of wd0a, and with raidctl -A root partitions, it will change
root as well.
2000-10-30 07:30:59 +00:00
c374cadf43
Get RELEASEDIR setting from /etc/mk.conf. Fixes misc/11104 by Markus Kurek.
2000-10-15 22:42:49 +00:00
fvdl