Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
27,997 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

27997 Commits

Author SHA1 Message Date
mycroft 2b65c6c346 Delay turning off P_TRACED until the process is actually waited on. It can't 
have any signals delivered while exiting, so this should be okay.  Change the
test for a traced process in wait4() to exclude a process that was started by
the debugger; in this case, only one SIGCHLD should be delivered.
 1997-04-28 13:17:05 +00:00
is 7c37cb4c4b Compile the Dutch message catalog. 1997-04-28 09:00:20 +00:00
is 03a704030c Added Norwegian libc error messages/signal names, donated by Stig 
Venaas <venaas@nvg.ntnu.no>.
 1997-04-28 08:49:31 +00:00
is 973c5ca8b5 Corrected ETOOMANYREFS message, provided by Matthieu Herb. 1997-04-28 08:36:21 +00:00
mycroft 701f15db33 Reinstate P_FSTRACE, with different semantics: 
* Never send a SIGCHLD to the parent if P_FSTRACE is set.
* Do not permit mixing ptrace(2) and procfs; only permit using the one that
  was attached.
 1997-04-28 04:49:27 +00:00
mrg fbb54fd51b meantion ppp(4) rather than README.bsd (inspired from PR#3548 from Martin Husemann) 1997-04-28 04:22:24 +00:00
mycroft 8a33a13c65 Minor code cleanup. 1997-04-28 03:49:57 +00:00
mycroft 5e34cc98aa Fix several errors and remove out of date comments. 1997-04-28 02:59:44 +00:00
mycroft 43a0dc8b74 Remove remnants of P_FSTRACE, which is no longer used. 1997-04-28 02:51:41 +00:00
mycroft ead5e1a6f7 When stopping a process being traced through procfs, wake up the *parent* (in 
case it happens to be doing a WAIT.
 1997-04-28 02:36:05 +00:00
mycroft e725c03060 When checking for init, compare against initproc, rather than comparing the 
PID.  No functional difference.
 1997-04-28 02:29:52 +00:00
mycroft 217c4e14ea Fix several deficiencies, as compared to ptrace(2): 
* Did not check for P_SUGID on ATTACH.
* Did not check for tracing of init on ATTACH.
* Did not turn off single-step mode on RUN or DETACH.
* Might have screwed up reparenting in some cases.
* Allowed anyone to detach the process.
 1997-04-28 02:28:39 +00:00
perry 36b2c99667 Add support for an ntpdate_hosts variable. 
settings:
	NO:	don't run ntpdate on boot
	DEFAULT:extract a list of hosts from /etc/ntp.conf
	otherwise, a list of hosts to poll with ntpdate
 1997-04-27 23:17:56 +00:00
pk 547d95a029 Remove esp FLUSH when residual bytes are present in FIFO, the ncr53c9x 
driver will flush when necessary. Doing the FLUSH here interferes
with DMA-enabled target selection.
 1997-04-27 22:12:40 +00:00
pk 94eaf1bb04 Implement target selection using DMA. 
To allow a period of testing the variable `ncr53c9x_dmaselect' is used to
enable this feature (default is 0, i.e. the old behaviour).
 1997-04-27 22:08:51 +00:00
thorpej 70ce55d5d7 Update for changes in machine-dependent COMPAT_HPUX code. 1997-04-27 21:40:47 +00:00
thorpej 97a6c32e58 Garbage-collect a bunch of _very_ hp300-specific code, most of which 
doesn't work anyhow (due to current and future fundamental differences
between NetBSD and HP-UX device semantics).  This can probably be shared
with other m68k ports now.
 1997-04-27 21:38:57 +00:00
thorpej ba0a5d5c58 Bump version: Better SPU detection code 1997-04-27 21:18:31 +00:00
thorpej 8b4cae0516 CPU -> SPU 1997-04-27 21:17:13 +00:00
thorpej 3cb561ed9f Don't define our own machineid values - pull in <machine/hp300spu.h> 1997-04-27 21:15:14 +00:00
thorpej fbad957c52 Update getmachineid() for new machineid values. 1997-04-27 21:13:55 +00:00
thorpej 767517edcc Don't even look for a Domain keyboard if we're not a 400, 425, or 433. 1997-04-27 21:12:43 +00:00
thorpej 5b511796c1 Uniquely identify 345 vs. 375 vs. 400 and 380 vs. 425. Adapted by me from 
code provided by Mike Smith.  While I'm here, convert this file to use
macros from <machine/asm.h> rather than making assumptions about how
C labels are handled.
 1997-04-27 21:10:06 +00:00
jonathan dbf4f7b71f * Tidy PHY [sic] selection code in epsetmedia(). 
* epinit() had both explicit xcvr selection for 3c589 and a call
  to epsetmedia().  The first is redundant; delete it, and EP_COAX_DEFAULT.

* Update comments to reflect 3c589 and 3c509B fixes.  Fix typos.
 1997-04-27 21:09:56 +00:00
thorpej cdb54b8d65 Update for new SPU options. 1997-04-27 21:06:29 +00:00
thorpej b27a863b02 Generate option headers for SPU type options, so that we may generate 
dependencies on them.
 1997-04-27 21:05:49 +00:00
thorpej 772891accd Use information provided by <machine/hp300spu.h> to determine if we 
might have a physical address cache.
 1997-04-27 21:02:34 +00:00
thorpej 650df29d4d These files depend on things in <machine/hp300spu.h> 1997-04-27 20:58:55 +00:00
thorpej 18a931000e Use <machine/hp300spu.h> to determine if we might have a physical address 
cache.
 1997-04-27 20:54:39 +00:00
thorpej 544f501d29 Rewrite identifycpu() to be partially table-driven, and to be more 
sane in general.  Since we can uniquely identify each SPU type
(except for 318/319/330, because there _are_ no differences, really),
require that the appropriate SPU option be configured into the kernel.
 1997-04-27 20:53:30 +00:00
thorpej d62e267a0c Uniquely identify 345 vs. 375 vs. 400 and 380 vs. 425, useful when 
looking for hp4xx-only hardware during autoconfiguration.  Code
mostly from Mike Smith, with a few changes by me.
 1997-04-27 20:50:01 +00:00
thorpej 9d4c5c9106 - Define new machineid and mmuid constants. 
- Rearrange slightly.
 1997-04-27 20:47:23 +00:00
thorpej fc79829eab #include <machine/hp300spu.h> 1997-04-27 20:43:37 +00:00
thorpej 80ff0f0f2f - Move a bunch of hp300 SPU-specific stuff out of cpu.h, and place it 
in new hp300spu.h file.  This includes the code that associates
  model number with cpu/mmu/cache combinations.
- Define "mmuid" constants for several models, derived from code
  provided by Mike Smith.
 1997-04-27 20:37:07 +00:00
thorpej f5ccce44c8 srt0.s renamed to srt0.S via repository copy Magick - we want this 
file to be preprocessed before it is assembled.
 1997-04-27 20:29:43 +00:00
briggs d25f63a7bf What was I thinking? 1997-04-27 19:26:48 +00:00
kleink dd33340fea Indicate file handling failures by exit codes >0; fixes PR/3538 from 
David Eckhardt <davide@piper.nectar.cs.cmu.edu>.
 1997-04-27 18:34:33 +00:00
is 5b3e1d439a "Slice" does not translate to "splitten". 1997-04-27 18:30:30 +00:00
is 5c869c4c5b The delay loop needs 8 cycles, not 3, on the 68030; so use _that_ value 
for the pre-calibration.
 1997-04-27 18:14:34 +00:00
thorpej 186a8bd2e4 Don't SEGV if a qualifier is passed without an argument. From 
Geoff Wing <mason@primenet.com.au>, fixes PR #2700.
 1997-04-27 16:58:22 +00:00
jonathan 65a1c6544a Fix tyop (accidentally snippedl line). 1997-04-27 11:58:46 +00:00
veego 1b80d8dd97 Add other isapnp id's for the 3c509. 1997-04-27 09:46:50 +00:00
veego f05fad5ad9 - Add a new variable to epaddcard to call epconfig with the right chipset. 
- Don't attach a 3c509 in PnP mode.
 1997-04-27 09:44:45 +00:00
jonathan 89ea27100f Update media selection, add 100Mbit info. 
Add cross-references to parent buses.
 1997-04-27 09:43:05 +00:00
veego bf37fc50d0 Rename the PROD_ID to PROD_ID_3C509 to make it possible to add other 
product id's, e.g. for the 3c515.
 1997-04-27 09:42:34 +00:00
veego a2e1f15ba7 - Replace the check for EP_BUS_PCMCIA in epsetmedia with a check for 
EP_CHIPSET_3C509 and change it a bit so it works now with the 3c509
  and still works with the 3c589.
- KNF
 1997-04-27 09:38:50 +00:00
jonathan f906f30c34 Add isapnp(4) man page. 1997-04-27 09:09:50 +00:00
lukem 66783f1f43 * fix "cd ~" so that it works (from Simon Burge <simonb@telstra.com.au> 
* move resetting of CFLAGS on powerpc to before optional CFLAGS settings
* minor code & man page cleanups
 1997-04-27 03:21:38 +00:00
pk 7b2c0237ea Dutch catalog 1997-04-26 22:50:36 +00:00
pk 1b12ce1554 Zwei tastatur ausrutscher corrigiert.. 1997-04-26 22:26:59 +00:00