Add a new explicit `struct proc *p' argument to socreate(), sosend().
Use that argument instead of curproc. Follow-on changes to pass that
argument to socreate(), sosend(), and (*so->so_send)() calls.
These changes reviewed and independently recoded by Matt Thomas.
Changes to soreceive() and (*dom->dom_exernalize() from Matt Thomas:
pass soreceive()'s struct uio* uio->uio_procp to unp_externalize().
Eliminate curproc from unp_externalize. Also, now soreceive() uses
its uio->uio_procp value, pass that same value downward to
((pr->pru_usrreq)() calls for consistency, instead of (struct proc * )0.
Similar changes in sys/nfs to eliminate (most) uses of curproc,
either via the req-> r_procp field of a struct nfsreq *req argument,
or by passing down new explicit struct proc * arguments.
Reviewed by: Matt Thomas, posted to tech-kern.
NB: The (*pr->pru_usrreq)() change should be tested on more (all!) protocols.
to pool_init. Untouched pools are ones that either in arch-specific
code, or aren't initialiased during initial system startup.
Convert struct session, ucred and lockf to pools.
abstracted by itry, ithrow, icatch et.al. macros
there is problem with these in stack setup for FreeBSD/ia64 at least,
and in general the rewritten explicit code is slighly more optimal
and smaller in size
the NetBSD code change is somewhat different to what was done in FreeBSD,
to improve readability of the code
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
convert all code to use smb_{rq|t2}_alloc() instead of allocating
structures on stack, make smb_rq_init()/smb_t2_init() static and not
exported outside smb_rq.c
* add receive hook - if set, this function is called when request is finished
* unstatic smb_rq_enqueue(), smb_rq_reply() so that code can use that
independant of smb_rq_simple() et al
this is needed for NT DIRECTORY CHANGE NOTIFY SMB, since they typically
take very long to complete and we want to be able to use single kernel thread
to handle them all
add support for 'nowait' requests (flag SMBR_NOWAIT), which don't expect
and answer from server and are marked as 'processed' immediatelly
after they are sent to server - needed for NT CANCEL SMB
change other SMBERROR() calls to SMBIODEBUG() - they are only useful when
debugging, and avoids spamming console/system logs with messages triggerable
from userland
so that iod wouldn't pause when the reply comes fast enough
to catch iod between smb_iod_recvall() and tsleep()
this gives nice performance boost for workloads with many synchronously
submitted transactions, like ls -lR
iod now doesn't need to wakeup periodically, so don't use any timeout
for its tsleep(); also use higher priority PSOCK instead of PWAIT
on error returns paths with parent still locked, which would
cause 'locking against myself' panic with nonrecursive lock
fixes problem where invalid share name would cause a panic
via smb_sm_lookup() -> smb_share_put()
many thanks to Matthias Drochner for pointing out easy way how to
trigger this problem
of iod calling smb_iod_sendall()
g/c now unneeded request timeout expire check from smb_iod_sendall()
make it possible to override default request timeout - set timeout
value in smb_rq_init() to default value, caller can adjust the value
before calling smb_iod_sendrq(); value <=0 means no timeout
do not inline smb_iod_rqprocessed()
make smb_iod_sendall(), smb_iod_recvall() 'return' void - the return value
was always ignored
smb_iod_recvall(): turn an programming error condition check to KASSERT()
smb_iod_main(): g/c unused 'error' local
smb_iod_thread(): iod_p is assigned in smb_iod_create(), so just KASSERT()
it's correct here
incorrectly bombed when the exclusive lock was help by different process
(*yuck*)
lockmgr() checks for 'locking against myself' type of locking problems itself,
so no need to do any additional checks
get its ACKs faster.
From Darwin via FreeBSD.
XXX I don't have any idea if this is useful or reasonable, but it looks
XXX sane and the code works. "Remove if found nonuseful."
This makes it possible to use files >4G.
From Darwin via FreeBSD, but changed so that smb_{read|write}() directly
calls appropriate i/o variant, and replaced md_get_uint16le() with
md_get_uint16() for target == NULL cases.
Replace some size_t's by int's.
use temporary variable to fetch the 16bit value instead
remove some redundant temporaries, use NULL for those md_get_*() calls instead
make sv_sm 16bit - it is 16bit in later SMB dialects
iod_sleeptimo is set to same value always, so use the value directly
and #if 0 iod_sleeptimo
add one smb_iod_wakeup() in smb_iod_sendrq()
XXX unfortunately iod thread still must wakeup periodically to check
XXX for arriving replies - command latency might be improved if this could
XXX be avoided
* no need to use dummy variables for md_get_*(), just use NULL
* don't bother storing rpflags/rpflags2, it's not used anywhere
* g/c local variable rperror
sent out, use mono_time instead microtime(), and simplify computation
in smb_iod_sendall(). Also count the timout once, not twice as previous code.
#if 0 iod->iod_lastrqsent, it was write-only
that our lint does not understand.
One of these extensions (local labels) is needed only when using multiple
try/catch blocks within a function, and the comment before these macros
say that they should be used only once per function so that the implementaton
may be portable.
The other extension (taking the address of a label) is not needed at all.
Remove the use of the extensions.
Do a little mbuf rework while here. Change all uses of MGET*(*, M_WAIT, *)
to m_get*(M_WAIT, *). These are not performance critical and making them
call m_get saves considerable space. Add m_clget analogue of MCLGET and
make corresponding change for M_WAIT uses.
Modify netinet, gem, fxp, tulip, nfs to support MBUFTRACE.
Begin to change netstat to use sysctl.
intent); besides being reable now, this fixes (several!) bugs in
timeout calculation, which caused nbssn_rselect() to return
prematurely
put the timeout in separate variable declared on top, so that it's clear
where the value comes from
don't adjust timeout in smb_nbst_connect() - this made the timeout
too short if connect happened to be fast
(XXX perhaps reevaluate this later and put back in some other form)
bump NB_SNDQ/NB_RCVQ to 64k, and actually use the defines to set
snd/rcv buffer sizes
use #define for the snd/rcv timeo
some whitespace/KNF fixes
p_sigmask or p_sigignore, so no point explicitly removing them
also kill some compatibility macros/defines and use the real thing directly,
it's more readable that way
g/c options SMB and opt_smb.h
rename the pseudo device to nsmb, and use needs-flag instead needs-count,
adjust nsmbattach() appropriately
replace SMB_CHECKMINOR() with explicit code in smb_dev.c, to improve readability
malloc types into a structure, a pointer to which is passed around,
instead of an int constant. Allow the limit to be adjusted when the
malloc type is defined, or with a function call, as suggested by
Jonathan Stone.
kqueue provides a stateful and efficient event notification framework
currently supported events include socket, file, directory, fifo,
pipe, tty and device changes, and monitoring of processes and signals
kqueue is supported by all writable filesystems in NetBSD tree
(with exception of Coda) and all device drivers supporting poll(2)
based on work done by Jonathan Lemon for FreeBSD
initial NetBSD port done by Luke Mewburn and Jason Thorpe
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
- implement SIMPLEQ_REMOVE(head, elm, type, field). whilst it's O(n),
this mirrors the functionality of SLIST_REMOVE() (the other
singly-linked list type) and FreeBSD's STAILQ_REMOVE()
- remove the unnecessary elm arg from SIMPLEQ_REMOVE_HEAD().
this mirrors the functionality of SLIST_REMOVE_HEAD() (the other
singly-linked list type) and FreeBSD's STAILQ_REMOVE_HEAD()
- remove notes about SIMPLEQ not supporting arbitrary element removal
- use SIMPLEQ_FOREACH() instead of home-grown for loops
- use SIMPLEQ_EMPTY() appropriately
- use SIMPLEQ_*() instead of accessing sqh_first,sqh_last,sqe_next directly
- reorder manual page; be consistent about how the types are listed
- other minor cleanups
between creation of a file descriptor and close(2) when using kernel
assisted threads. What we do is stick descriptors in the table, but
mark them as "larval". This causes essentially everything to treat
it as a non-existent descriptor, except for fdalloc(), which sees a
filled slot so that it won't (incorrectly) allocate it again. When
a descriptor is fully constructed, the code that has constructed it
marks it as "mature" (which actually clears the "larval" flag), and
things continue to work as normal.
While here, gather all the code that gets a descriptor from the table
into a fd_getfile() function, and call it, rather than having the
same (sometimes incorrect) code copied all over the place.
christos