fb363505f8
LLVM sshramdisk needs 8.9MB, so bump again.
2014-08-14 18:38:29 +00:00
75f2a57740
CD images need libarchive if MKBSDTAR is yes.
2014-08-14 16:27:17 +00:00
0d53576a4b
Add dtrace modules to amd64-xen module set list. Hi jnemeth!
2014-08-14 16:26:21 +00:00
1ade0b5b66
Add tar.debug and cpio.debug to lists for MKBSDTAR=yes MKDEBUG=yes.
2014-08-14 16:25:20 +00:00
d02c242c7b
Bump ramdisk size to 3.2MB and include dhcpcd.
2014-08-13 20:52:05 +00:00
35031b132a
Fix c&p error: libisc.a->libirs.a
2014-08-12 20:57:59 +00:00
c2426fb47b
Add firmware images to this image, as discussed on port-arm.
2014-08-12 11:49:04 +00:00
d4a4ba1584
Add a IMAGEPREBUILD option for makefiles to ovveride (e.g. to additionally
...
add files to the staging directory)
2014-08-12 11:48:22 +00:00
7a5aaa5671
Mark compat directories as compat, not arch64.
2014-08-11 13:40:34 +00:00
b6c78a9d3b
remove debug cruft, the example module is not normally built
2014-08-11 05:19:16 +00:00
3481529578
Add the infrastructure for MODULAR support for Xen kernels. At
...
the moment, this can only load very simple modules due to missing
symbols. It is being add at this time to make pullups to the
netbsd-7 branch easier. It is not enabled by default in any kernels.
2014-08-11 03:43:25 +00:00
91161928e4
MKCOMPAT set fixes
2014-08-10 23:26:48 +00:00
d09c62a0bc
Include installboot on amd64/i386 install ramdisks in prep for a change
...
to sysinst which will use it instead of a handrolled replacement.
2014-08-10 20:07:41 +00:00
48ed1e8202
Bump the ramdisk size; the longer paths on the build cluster are
...
likely enough to put this over the edge.
2014-08-10 20:04:30 +00:00
26dd58ba65
Bump the ramdisk size on macppc and sandpoint somewhat to compensate for
...
larger code with LLVM.
2014-08-10 17:58:51 +00:00
f14316bcbc
Update build glue for LLVM/Clang 3.6svn r215315. Changes include various
...
performance improvements across all backends and a much improved PPC32
backend.
2014-08-10 17:32:54 +00:00
916c5fdf56
OpenSSL man page refresh, adding one new manpage
...
note the import/update in doc
2014-08-10 17:07:03 +00:00
3f4482a092
Bump image size
2014-08-10 14:42:33 +00:00
aa4de98596
Build ubsec module only for i386 and amd64 and punt on the other arches.
2014-08-10 11:51:40 +00:00
3beda0103f
merge openssl 1.0.1i
2014-08-10 08:07:48 +00:00
138fa825c9
Increase the image size to 1700KB.
...
At this point, the build succeeds if the build path is short,
but may fail if long. Thanks for martin@ and tsutsui@.
2014-08-10 06:35:56 +00:00
547b3a3b01
Changes to existing files to enable building AARCH64 userland.
...
evbarm64-el
This is clang only. While gcc4.8 supports aarch64, no netbsd support has
been written for aarch64 with gcc4.8.
2014-08-10 05:56:36 +00:00
beb9c6d1b5
Preliminary files for AARCH64 (64-bit ARM) support.
...
Enough for a distribution build.
2014-08-10 05:47:35 +00:00
82ff1017b0
Update and simplify build glue for libc++ r215289.
2014-08-09 19:06:49 +00:00
c5a47a1b14
Add rescue/ekermit.
2014-08-09 18:32:34 +00:00
f9f5065b39
Build ubsec(4) as a module on all arches where it was obivous how to do so.
...
That excludes powerpc because evppc OEA is missing definitions for
PPC_INTR_IMPL and PPC_PCI_MACHDEP_IMPL.
Adjust set lists.
Compile tested for most arches only.
2014-08-09 12:34:05 +00:00
e52d064647
Mark gkermit files "obsolete", don't remove then from the set lists.
2014-08-09 11:33:53 +00:00
643acb6d0e
Test that reading a CTLTYPE_INT sysctl variable into a buffer that is
...
too small returns ENOMEM, and that reading it into a buffer that is
large enough returns the expected sizeof(int) bytes of data.
2014-08-09 07:04:03 +00:00
daf5582ab4
Install man page for ekermit(1).
2014-08-08 21:41:46 +00:00
84f75f96e7
Add ekermit.debug.
2014-08-08 19:54:14 +00:00
3b7feb0ead
Unhook gkermit from the build.
...
It is being replaced by the BSD-licenced ekermit, as proposed
on tech-userlevel on 7 Aug 2014.
2014-08-08 19:38:47 +00:00
97d8576cce
Add ekermit to the build.
...
It will replace gkermit, as proposed in tech-userlevel on 7 Aug 2014.
2014-08-08 19:34:35 +00:00
0c7d9d4853
Don't set -mmultiple or -mno-string for PowerPC, the difference is too
...
small to really matter and it sometimes even increases the size.
2014-08-08 16:56:30 +00:00
465192a6ff
Cleanup cargo cult.
2014-08-08 14:00:30 +00:00
03d5c785ca
Get macppc to build again by adjusting sizes.
...
In addition to the ramdisk size, it is necessary to have matching MD
sizes. Increase the MD sizes, and leave a comment near the ramdisk
size to ease future changes.
2014-08-07 16:51:56 +00:00
dbadcbcebd
I need 2244k for src/distrib/macppc/floppies/ramdisk, rather than
...
2240k. My build is normal, with a few uncommitted changes that really
shouldn't change the install situation. Because 2240k isn't near a
magic boundary, just increase it a hair.
2014-08-07 15:48:19 +00:00
daa4f8c5c7
Add missing Kyuafile.
2014-08-07 14:22:13 +00:00
8533cc60cb
Update for xorg
2014-08-07 08:58:55 +00:00
64c260d8f5
New files that appeared in tzdata2014f, plus the
...
leapseconds file that has existed for a long time
but was not installed before today.
2014-08-06 19:24:00 +00:00
7d1de5ea18
Bump ramdisksize even slightly more
2014-08-06 13:57:15 +00:00
af7c36dc7a
Punt - backout sysinst message catlogs
2014-08-06 12:15:01 +00:00
9e8101899d
To make pax use ${TOOL_GZIP}, we need to pass "--use-compress-program
...
${TOOL_GZIP}" on the command line, and refrain from passing "-z". If
passed "-z", pax will use plain "gzip", ignoring --use-compress-program.
2014-08-06 11:41:18 +00:00
e4ed3c4254
Introduce and use GZIP_FLAGS variable.
...
The previous use of GZIP="-9 ${GZIP_N_FLAG}" happened to work, but
the new use of GZIP=${GZIP_FLAGS:Q} is safer.
For consistency, also use GZIP_FLAGS elesehere in this file.
2014-08-06 10:41:13 +00:00
8fe4ed8e41
Sigh - move sysinst catalog files (which differ per arch, ouch!)
...
to md lists.
2014-08-06 08:23:43 +00:00
186f554f7e
Add sysinst message files
2014-08-05 18:46:21 +00:00
6469ed8dba
Bump ramdisk size
2014-08-05 16:18:16 +00:00
0b92f0fef9
Ue ${GZIP_N_FLAG} instead of -n when setting GZIPFLAGS or GZIP_FLAGS.
...
This will allow -nT instead of just -n to be passed to pigz.
2014-08-05 15:45:49 +00:00
f78c710fb2
Pass GZIP="-9 ${GZIP_N_FLAG}" instead of GZIP=-9n
...
in the environmentto commands that invoke ${TOOL_GZIP}.
This will allow them to use -nT instead of just -n with pigz.
2014-08-05 15:43:50 +00:00
71da667fc9
Use ${TOOL_GZIP_N} instead of ${TOOL_GZIP} -n, and similarly
...
use ${TOOL_GZIP_N} -9 instead of ${TOOL_GZIP} -9n, etc.
This will pass -nT instead of just -n if the gzip program is
actually pigz.
2014-08-05 15:40:58 +00:00
3d52f18626
Bump ramdisk size
2014-08-05 14:58:01 +00:00
joerg