Commit Graph

5183 Commits

Author SHA1 Message Date
yamaguchi
78e4f33125 Add if_vlan directory to lists to fix the build failure
build.sh was failed when using "-V MKDEBUG=yes"
2018-06-15 09:54:02 +00:00
sevan
66fd14939a Prior to ZFSv15, volinit was an undocumented command which could be used to
populate /dev with zvol device nodes.
Following on with the recent ZFS/DTrace update, this is no longer a valid option
and causes the mountall script to barf zfs usage() following from
unrecognized command 'volinit' error.
2018-06-08 14:44:21 +00:00
riastradh
aafff8763a Revert previous: Don't generate XMSS host keys for sshd by default.
XMSS is a stateful post-quantum signature scheme.

- Post-quantum security for _online_ authentication is not important
  until quantum computers become practical; there's no danger of
  retroactive forgery in sessions that have already completed.

- As a stateful signature schemes, XMSS is qualitatively different
  from all the other ones sshd supports, requiring additional
  administrative care: roll back the state (e.g., from a disk backup
  or VM snapshot), and you've shot yourself in the foot.

If users want XMSS keys, they can make them explicitly, but there's
no need for this to be enabled by default.

Discussed with christos offline.
2018-05-26 19:18:11 +00:00
jmcneill
c9b64841e5 Silence ssh-keygen output when host keys are generated. Instead, print only
key fingerprints. This replaces dozens of lines out ASCII art output with
something more reasonable:

armv7# service sshd start
ssh-keygen: 1024 SHA256:ynP4BQ2B0Fknnf9PfF4QoUDlYi0+7rNfYXTOYP2cDic root@armv7 (DSA)
ssh-keygen: 521 SHA256:Eoj382aaJNlSxuq/aYj3AXgxfMJAkyVPoCQd2BNjJiA root@armv7 (ECDSA)
ssh-keygen: 256 SHA256:+e9/qTbbN/g6xvkadtHsmIQ+Pc0afZRxbXJsk2HKIzY root@armv7 (ED25519)
ssh-keygen: 2048 SHA256:urNaF/m6oiCe5hXFZBxGLW2PvLz0ibtRFrqYw6R+qTw root@armv7 (RSA)
ssh-keygen: 256 SHA256:Su2Nal2W3vrFz8ukpcSXngl1/bu6xUm1nSvbxTHe9Js root@armv7 (XMSS)
Starting sshd.
2018-05-26 00:17:54 +00:00
uwe
2a24bb8653 Provide resize_disklabel=NO default. Used by arm images and is not
part of the stock rc.d yet.  This silences rc when you delete the
whole resize_* block from rc.conf after the first boot.
2018-05-25 20:48:54 +00:00
thorpej
266bca89c9 Add a 1PPS-over-GPIO driver, originally by Brad Spencer, with changes by
me to adapt to the new GPIO interrupt interface and support a wider variety
of GPIO pin configuations.

PR kern/51676
2018-05-20 14:08:32 +00:00
jmcneill
3117ca5607 Create bpf and openfirm devices 2018-04-28 12:45:03 +00:00
martin
ac1539438e Cosmetics: default to dmesg -t when writing /var/run/dmesg.boot -
the timestamps at boot time are mostly useless.
2018-04-18 04:27:47 +00:00
christos
7e6759edb0 Hide ps error about processes not found (we could be more specific...)
It is superfluous, since we print:
    foo not running? (check /var/run/foo/foo.pid).
2018-04-11 18:51:22 +00:00
christos
1399b357f6 rename ledpanel to lcdpanel 2018-04-09 20:17:33 +00:00
christos
f32c26c37c rename panel to ledpanel 2018-04-09 19:06:34 +00:00
christos
e5ff1cf5fd Simplify so we don't have to hard-code the key filenames in two places. 2018-04-09 15:02:39 +00:00
christos
733ab037c6 support xmss keys 2018-04-07 00:41:16 +00:00
kre
7d5ae540ad PR misc/53145 (Bruce Lilly)
Use ps -A instead of ps -ax (-A means -ax, but -A is posix, -x is not)
Use ps -o args instead of ps -o command (same reason).

This makes no difference when the ps used is /bin/ps on NetBSD, but
can make a difference when some other ps command gets invoked instead.

XXX pullup -8
2018-04-01 18:26:51 +00:00
ryo
fe33aa2786 Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)
- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)
2018-04-01 04:35:01 +00:00
snj
84c9079f95 remove rstart, which hasn't been used since the xfree86 days. 2018-03-29 04:19:54 +00:00
christos
a9b3a63e1f Update the keys file to the latest version from:
https://ftp.isc.org/isc/bind9/keys/9.11/bind.keys.v9_11

This includes the new KSK2017 key which is planned to replace the KSK2010
in October 11th, 2018. It is important to have software that ships with
both before September 11th 2018. Anything that bootstraps after that could
have trouble switching.

XXX: pullup-8, pullup-7, pullup-6
2018-03-09 18:56:02 +00:00
sevan
4696d4d244 Instead of explicitly specifying a kernel name, ommit to allow the bootloader to iterate
through the list of kernel names it is configured to try. This way there is
fallback if /netbsd is not present. netbsd is the first name to be tried anyway.
Issue brought up on tech-kern@ by Patrick Welche <prlw1 AT cam ac uk> where a system
without /netbsd hung on boot.
Suggestion by rudolf <netbsd AT eq cz>
https://mail-index.netbsd.org/tech-kern/2018/02/16/msg023122.html
2018-03-02 00:25:26 +00:00
snj
017fa37fab /usr/X11R6 has been empty on most NetBSD installations since 2008,
and the last few straggling ports dumped it in 2015.  It's time to
prune references to /usr/X11R6 from our config files.
2018-03-01 06:12:09 +00:00
uwe
097b3add5a Actually install dhcpd6 rc script. Organize CONFIGFILES
alphabetically again while where.

PR 53018
2018-02-17 03:02:04 +00:00
mrg
af3c0cd56d updates for GCC 6.4: add gcc-6 specific headers, combine some
all-gcc files, bump the shlib versions on new libs.
2018-02-03 21:27:45 +00:00
kamil
413e439cd5 Install GCC (gcc.old/) headers for Sanitizers
Install:
 - allocator_interface.h
 - asan_interface.h
 - common_interface_defs.h
 - tsan_interface_atomic.h

Into:
 - /usr/include/gcc-5/sanitizer

Note headers in a comment headers for introduction in future:
 - dfsan_interface.h
 - lsan_interface.h
 - msan_interface.h

Skip a file that will never be relevant on NetBSD:
 - linux_syscall_hooks.h

PR 52265 by Kamil Rytarowski

Proposed and accepted on tech-toolchain@.

Sponsored by <The NetBSD Foundation>
2018-02-01 20:50:22 +00:00
skrll
ac34435581 Remove port-acorn26
OK core@
2018-01-24 09:04:40 +00:00
knakahara
b8f54fc79b add ipsec(4) interface ATF. 2018-01-10 11:06:06 +00:00
christos
b985414b8f Merge autofs support from: Tomohiro Kusumi
XXX: Does not work yet
2018-01-09 03:31:12 +00:00
jmcneill
a5c866b6cf Import NVIDIA Tegra XUSB firmware for Tegra124 and Tegra210. Installation
of this firmware is controlled by the MKTEGRAFIRMWARE option, which
defaults to yes on evbarm and evbarm64 and no everywhere else.
2018-01-07 20:59:24 +00:00
mlelstv
2f6dbbcf88 Use sysctl to retrieve iostat names instead of parsing possibly
truncated iostat output.

Check dkctl listwedges output with grep.

Fixes PR 59205.
2018-01-06 23:44:06 +00:00
msaitoh
7909c778fe Add NVMe devices. 2018-01-05 10:04:13 +00:00
is
d9123c9e75 Add startup file for dhcp v6 with builtin isc-dhcp. Alas, this needs to
be a seperate process. On the positive side: this can't break the dhcpd
for IPv4 when tested.
2017-12-29 18:15:48 +00:00
jmcneill
4d9106a6a2 Add missing RPI FDT build goop, from nick. 2017-12-11 11:38:14 +00:00
bouyer
878cb1cfc5 Fix fallout from hid factorisation:
- need to install sys/dev/hid/hid.h for userland
- include it where needed - most of the time in place if usb/usbhid.h
2017-12-10 20:38:13 +00:00
jmcneill
f0053e9555 Update example PKG_PATH entry to use the CDN frontend, use uname -p instead
of uname -m for processor subdirectory, and derive the OS release from
uname -r.
2017-12-07 18:26:51 +00:00
jmcneill
2dbf225c9a make a few more drm nodes 2017-12-05 19:17:11 +00:00
kre
6b923cca7a Do away with (not well specified, even if it happens to work) absurd
15 arg test ([ ]) expression, and replace it with several well defined
2 arg tests, combined with (also well defined) sh syntax.
2017-12-04 14:50:33 +00:00
jmcneill
db2dcdb34a Unhook BPI, CUBIEBOARD, and CUBIETRUCK kernels from the build (use SUNXI kernel now) 2017-11-30 19:54:50 +00:00
jmcneill
fb651b612c Add driver for QEMU Firmware Configuration device.
This interface allows the host to pass various data items and files to
the guest OS.
2017-11-25 16:31:03 +00:00
macallan
dfcdd5e31d create more /dev/pci* nodes, for PCIe systems 2017-11-15 04:31:48 +00:00
martin
16d924d2d3 Add net/ipsec debug lib directory 2017-11-01 08:32:07 +00:00
taca
6f3643049e /tmp/t 2017-10-25 07:41:35 +00:00
jmcneill
e30b21a362 Update contact info for changes to this file. 2017-10-21 19:43:53 +00:00
kre
48bbd83f93 Create directory for new bwfm firmware to be installed into. 2017-10-21 05:30:48 +00:00
sevan
0759fcfcfc With the new version of OpenSSH, SSHv1 is no longer supported server-side.
Along with that rsa1 type keys are no longer supported.
Don't try to generate such keys on new systems.

ok christos
2017-10-07 21:41:51 +00:00
mrg
794f77b51f update for xkeyboard-config 2.21.
prepare for libdrm data files.
2017-08-29 07:53:54 +00:00
sevan
eb0a13ec2a veriexec is enabled by default in most kernel configs but the lack of device
node results in a non working config, despite following manual to get setup.
Remove a step for the user by creating a device node for veriexec by default.


ok mrg jakllsch
2017-08-28 01:34:52 +00:00
christos
a9560cc50f Creating installation/ramdisk here does not work; it happens too late. 2017-08-20 15:35:31 +00:00
mrg
c62a157eb2 merge the rest of sbmips into evbmips. install the stand files in
/usr/mdec/sbmips/ and document them in installboot(8) even though
it isn't really ported yet.  also build the SBMIPS kernels.

unfortunately, sbmips has been broken since mips64 merge, but the
fix can happen in the evbmips version, which we might merge into
the older trees anyway.

XXX: releng can turn off sbmips* builds now for -current.
2017-08-15 10:11:31 +00:00
jmcneill
3d97e8977a Update Raspberry Pi 3 example to use dplcom0 instead of dty00 2017-08-12 11:45:20 +00:00
jmcneill
40fab7550d add dial-out device node for plcom 2017-08-12 11:41:21 +00:00
jmcneill
96c1990c4a Add an example for configuring the Raspberry Pi 3's bluetooth chip. 2017-08-11 11:57:05 +00:00
jakllsch
136f040412 Fix up bcm43xx bluetooth firmware addition. Including mtree directory
addition, and using the correct spelling of the license file name.
2017-08-10 19:42:53 +00:00