ready. This avoids gratuitously starting the motor on floppy and CD-ROM
drives, and eliminates the need for the audio playing test in cdopen().
Therefore, also remove PQUIRK_NOSTARTUNIT.
allocation length a little more precisely -- add the space for the header in
cd_mode_sense(). Also delete the XS_CTL_SILENT, since we really do want to
see errors.
Lastly, add a similar wrapper for mode select, simplifying the callers
slightly.
if our other MODE SENSEs fail. Use this code for the optical device case,
at least for now. (We could query the optical media type and do a table
lookup for the geometry, but why bother? Actually, why bother with geometry
at all, but I digress...)
the "bus type" for this.
Merge all the code in the SCSI and ATAPI backends for "cd" devices. All of
the mode page handling and whatnot is general to SCSI MMC devices, and should
never have been separated to begin with. This fixes a variety of problems,
and adds load/unload support for SCSI-attached devices.
have to adjust for whether he have a "small" or "large" mode sense response.
sd_scsibus_getcache(), sd_scsibus_setache(): Set SMS_DBD so that we don't
have to deal with block descriptors here.
sd_scsibus_mode_sense(): Add a new parameter, "int *big", which tells the
caller whether it's a small or large header.
sd_scsibus_get_parms(), sd_scsibus_getcache(), sd_scsibus_setcache(): Use
the "big" value to find the data following the mode sense header correctly.
sd_scsibus_mode_sense(): Disable PQUIRK_NOBIGMODESENSE for now, as the
reasons for it were dubious and most likely fixed now.
sd_scsibus_get_parms(): Now that we're actually locating the right data,
check the returned page code to see if it's correct before using the mode
page info.
sd_scsibus_get_parms(): Get the rotational rate from the flex geometry page
too, if present.
XXX sd_scsibus_get_{opt,simplifiedparms}() need some work.
* Use the "block descriptor length" to find the beginning of the mode page
data. This is critical, since some devices do not return a block descriptor
at all. (XXX There is disgusting structure hackery here.)
* Always use scsipi_size() (i.e. READ CAPACITY) to get the total disk size.
* Get the rotational rate from the rigid geometry page.
* Don't read the block size from the block descriptor if there was none.
* Get the block size from the flexible geometry page if possible.
* If we don't like the way page 4 smells, try page 5, rather than just punting.
three PRs regarding them: 17836, 17837, 17838. Did a few kernel
compiles with them just to make sure they are okay. Approved by
christos@, thanks to Dave for sending the PRs and verifying to me
that they work.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
fine at U2W, but barf at U160, with different controllers. Unfortunately
sometimes just being initialized at U160 does the trick, so setting them
to lower speed in the BIOS may also be needed.
rather than 10ths of ns. This is necessary in order to represent
Ultra320 SCSI.
* Add Ultra320 SCSI to the scsipi_syncparams[] table.
We're not going to bother bumping any version numbers with this change; only
the "hba" driver uses scsipi_sync_period_to_factor(), and the uses of
scsipi_sync_factor_to_period() are all internal to the scsipi code. Most
things just pass the factor around, which is unchanged by this.
Reviewed by Frank van der Linden.
mycroft