75380e08a1
Use new NOINSTALL option for libraries that are used only during the build
...
of a program, and not installed into the final system.
1997-05-30 01:55:09 +00:00
185b24dd5b
Use libinstall::, not install:, to prevent instaling LIB.
1997-05-07 16:20:26 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
4478e618ee
Fix a warning.
1997-03-14 21:03:43 +00:00
2cf7613010
Sun RPC/bootparams always enabled (No -DSUN_BOOTPARAMS needed)
...
Add SUPPORT_BOOTP (and global try_bootp) to allow MD code to
determine whether BOOTP is used (compile-time and run-time).
Thanks to Matthias Drochner for the SUPPORT_BOOTP ideas.
Copyright asigned to The NetBSD Foundation.
1997-03-14 20:34:48 +00:00
8f0295e7f0
Moved here (via repository copy) so they are more easily shared.
...
I did not add them to the library, but rather compile them where
the netboot program is built so I can add -DSUN_BOOTPARAMS, etc.
1997-03-11 18:23:55 +00:00
72a6422a5e
allow includers to specify library-specific CPP flags via ${LIB}MISCCPPFLAGS
1997-02-16 21:25:18 +00:00
2242daf790
Initialize 'bestf' to make this compile again with -Wall.
1997-02-16 13:02:59 +00:00
9a6b12944d
In close(), if the file descriptor was used for writing, don't free
...
data structures that weren't allocated. Fix sanity-checked
by Matthias Drochner.
1997-02-04 18:38:20 +00:00
63930d7db4
Add some debugging code to free(), to catch frees before the
...
start of the heap and beyond the end of the heap (if a heap limit
is defined).
1997-02-04 18:36:33 +00:00
01bd8a8ca8
Initialize `f_offset'.
1997-01-28 09:41:03 +00:00
981d496969
Change file system file-open semantics slightly: if file system returns
...
EINVAL, that error code is ignored, leaving whatever other meaningful
error code that might have previously been returned intact. Stand-alone
file system implementations return EINVAL typically when the file system
is not recognized (i.e. cd9660_open on a UFS file system, ufs_open on a
cd9660 file system, etc.). This meant that if you had multiple file
systems in a file system switch, the first returned ENOENT (because
it recognized the file system type, but the file wasn't there) and
the second returned EINVAL (because it didn't recognize the file system
type), errno would be set to EINVAL. Now it'll be set to ENOENT.
It would probably make sense to have file systems return a special
error code to indicate "this file system is unrecognized," which
could then be special-cased, but that's a fair bit more invasive.
1997-01-25 01:13:41 +00:00
da4932bff2
add EINVAL and ENOTDIR, as suggested by Matthias Drochner
1997-01-25 00:37:50 +00:00
192e22f5b7
isonum_722 and isonum_732 are now back in iso.h
1997-01-24 00:53:40 +00:00
6f0de181b1
update for iso.h changes which remove the need for the nastiness that was here
1997-01-24 00:29:19 +00:00
3ca5f41d59
clean up substantially. Transform clean, depend, cleandir targets from ::
...
to :, so they can be used e.g. with <bsd.prog.mk>. Standardize variable
names used to configure kernel libraries.
Variables used by these Makefile.inc's are:
S must be set to the top of the 'sys' tree.
${LIB}DST may be set to the location of the directory where library
objects are to be built. Defaults to ${.OBJDIR}/lib/${lib}.
${LIB}_AS may be set to 'obj' to build a object from the library's
object files. (Otherwise, a library will be built.)
Defaults to 'library'.
${LIB}MISCMAKEFLAGS
Miscellaneous flags to be passed to the library's Makefile when
building. See library's Makefile for more details about
supported flags and their default values.
(where LIB is KERN, SA, or Z, and lib is kern, sa, or z, depending on which
library's Makefile.inc is being discussed.)
1997-01-23 22:29:07 +00:00
2ce4559663
clean up variable use, standardize with other kernel library Makefiles.
...
rename 'NO_NET' variable to SA_INCLUDE_NET, which defaults to 'yes' but can
be set differently. kill EXTRACFLAGS, add SACPPFLAGS (generated from
CPPFLAGS by Makefile.inc) to CFLAGS. Add support for including gzipped-file
read support, enabled by setting SA_USE_CREAD to yes (defaults to no).
1997-01-23 22:19:56 +00:00
ea27b7aa31
Add a whole bunch of features, from Matthias Drochner:
...
best-fit, rather than first-fit, algorithm.
ability to handle free()s with zero size (needed for gzip read
support).
ability to start the heap someplace else (defined by HEAP_START).
ability to limit growth of the heap (via HEAP_LIMIT).
debugging sanity checks (ifdef DEBUG).
allocation tracing support, to help debugging (ifdef ALLOC_TRACE).
and from me:
ability to pick a (smaller) first-fit algorithm (via ALLOC_FIRST_FIT).
lots of comments.
If heap limits and all of the debugging features are disabled (the default),
and ALLOC_FIRST_FIT is defined (not the default), compiled with -O on the
alpha the new version is the same (object) size as the old version.
1997-01-22 01:18:23 +00:00
862c1d585c
code to open/close/read/lseek gzipped files, from Matthias Drochner.
1997-01-22 00:40:07 +00:00
21979e8d6b
define these functions with an 'o' prepended to their names if
...
__INTERNAL_LIBSA_CREAD is defined (so that they can be used by the
compressed-read code).
1997-01-22 00:38:09 +00:00
b581a80665
prototype lseek(). also, prototype oopen(), oclose(), oread(), and olseek()
...
if __INTERNAL_LIBSA_CREAD is defined.
1997-01-22 00:37:23 +00:00
493bd9e110
fix file system buffer leak that occurs if an error occurs (e.g. file not
...
found) during the file system open function after having read some data
from the disk. From Matthias Drochner (PR 3120).
1997-01-17 20:17:58 +00:00
9596fd8a77
only call the device close routine on a (fall-through) error if
...
F_NODEV isn't set in the file flags for the file being opened.
Pointed out by Matthias Drochner in PR 3122. (fix equivalent to
the one he included, but stylistically different.)
1997-01-17 20:03:53 +00:00
9be91c7fb4
fix my typo; found by Klaus Klein <kleink@layla.inka.de>
1997-01-17 17:06:06 +00:00
313f6180e6
add prototypes for ethers(3) functions; fixes PR 2471.
...
fix suggested by Jason Thorpe.
1997-01-17 08:17:57 +00:00
b1f42c3a13
add memcmp, implemented as a wrapper around bcmp() (like memcpy() is
...
implemented as a wrapper around bcopy()).
1997-01-16 04:06:15 +00:00
3ec6dad0f1
Typo police from: Juergen Hannken-Illjes
1997-01-02 22:06:51 +00:00
12729c12d1
Add missing `#ifdef NFS_DEBUG' (from Rolf Grossmann; PR#3061).
1996-12-27 11:55:58 +00:00
2c8d554885
PR/2981: use ${VAR:Q} instead of "${VAR}" to avoid quoting problems
1996-12-26 21:32:08 +00:00
bd9ec27d9e
kvprintf => vprintf (PR#2989, Juergen Hannken-Illjes).
1996-12-01 20:22:19 +00:00
033eec34ec
Oops... get the vprintf prototype right.
1996-11-30 04:35:51 +00:00
ecfe88202c
Add declaration for vprintf.
1996-11-30 04:20:14 +00:00
dfc25d8ab4
Finish the kprintf backout: kvprintf -> vprintf was missed.
1996-11-30 04:19:21 +00:00
a5461e87e1
Delete spurious #endif
1996-10-14 21:16:55 +00:00
40bcaca9ac
fix a bogon in some new functionality apparently added in the last
...
commit (which was supposed only to back out the printf->kprintf changes).
The new functionality is: if the user enters control-D, return an error.
1996-10-14 04:49:21 +00:00
e44c1d1f33
backout previous kprintf changes
1996-10-13 02:28:58 +00:00
92a808f167
backout previous kprintf changes
1996-10-13 02:21:25 +00:00
60d201973e
printf -> kprintf, sprintf -> ksprintf
1996-10-10 22:46:11 +00:00
2b33d9d53a
- printf -> kprintf, sprintf -> ksprintf
...
- use a debugging printf macro instead of #ifdef #endif everywhere.
1996-10-10 22:45:37 +00:00
63a2506f79
Merge netbsd-1-2 branch back into mainline.
1996-10-09 01:15:04 +00:00
bd581c1c73
fix several endianness bugs that caused name lookup (!!) and symlink
...
expansion to fail on little-endian machines.
1996-10-02 20:28:26 +00:00
31afb65969
Remove superfluous -I. accidently introduced when I imported the PPC port
1996-10-02 16:19:51 +00:00
fd225e6527
Add support for booting from cd9660 fs
...
Support directory traversal and symbolic links for nfs booting
Close device when file opening failed
Plug memory leak in ufs code
1996-09-30 16:01:18 +00:00
bbfe67624b
enough 64-bit fixes to make network booting work on the Alpha. In general,
...
these are hacks (s/long/int/, etc.), but this code really needs a heavy
cleaning (including fixed-size typing) and I don't have time to give it one
now.
1996-09-26 23:22:01 +00:00
f496a53cbf
make sure new allocations are aligned.
1996-09-26 23:15:00 +00:00
8042054add
remove some unnecessary and broken casts on char *'s which are being subtracted
1996-07-10 18:41:38 +00:00
910efd056e
nfs_read and nfs_write return 'int' rather than ssize_t.
1996-07-10 18:32:33 +00:00
51347fcaaa
Return useful file descriptor when opening a raw device.
1996-06-21 20:51:23 +00:00
68f420b593
Oh, what's in a name..
1996-06-21 20:29:28 +00:00
b461ef1d17
Allow seeks on raw devices. A `f_offset' field is added to the file structure
...
which is maintained in lseek(), read() and write(), and passed along to
the device's strategy routine.
1996-06-21 20:09:03 +00:00
433594b99d
missing semicolon
1996-06-03 22:11:23 +00:00
28061842a2
Fix include file order to confirm to KNF in master tree also.
1996-06-02 13:28:21 +00:00
c9a8578d2b
Fix gcc -Wall warnings about printf arguments.
1996-05-14 10:28:18 +00:00
e901286aad
When sending an ARP request, use the interface address for the route, rather
...
than the first address assigned. This gives slightly different behaviour in
the presence of aliases. From Bill Fenner, via Pete Bentley.
1996-05-11 12:59:55 +00:00
056810ed99
Make this code independent of <sys/nfs> now that we use very little
...
from there anyway, so we can ignore changes in the NFS code...
1996-02-26 23:05:14 +00:00
6a0803ca9a
Make these build again in the wake of the v3 changes
1996-02-26 21:50:07 +00:00
c24557134f
Needed for NFS booting; we aren't likely to use v3 here any time soon.
1996-02-26 21:49:34 +00:00
14d9cd33af
netinet prototypes
1996-02-13 23:40:59 +00:00
b3ba75d64e
use vprintf where appropriate
1996-02-09 16:10:59 +00:00
7ce27395a6
Need vprintf() for things like panic().
1996-02-08 20:19:36 +00:00
43349cd7ef
Add a memcpy() function, just a cheezy wrapper around bcopy(). Yes,
...
it's really true...we didn't have one before, even though the Makefile
thought we did. (Yes, I checked the Attic...)
1996-01-30 19:45:34 +00:00
38c7f668a2
Clean-up open/close logic of "net" device. Fixes PR 1726
1996-01-29 23:54:14 +00:00
b7b97847ce
Some files containing more than one function are split. This reduces the
...
size of the resulting loader. The read_inode() function now returns the
result of the strategy function instead of success in all cases (ufs.c).
Fixes pr#1817
1996-01-13 22:25:32 +00:00
284c0cd0b1
Make `time difference' a signed quantity explicitly.
1995-12-13 23:38:10 +00:00
63a836a44a
Check return value from sendrecv so that ARP timeout does not cause
...
garbage to be entered into the ARP table. Also fix ARP_DEBUG code.
1995-12-08 04:12:53 +00:00
63e145ebd7
Correct error which caused truncation of port number on i386 (PR#1823)
1995-12-08 04:10:28 +00:00
87093145ce
Use bzero() instead of memset(..., 0, ...).
1995-11-29 06:12:08 +00:00
dfad729a16
make netinet work on systems where pointers and longs are 64 bits
...
(like the alpha). Biggest problem: IP headers were overlayed with
structure which included pointers, and which therefore didn't overlay
properly on 64-bit machines. Solution: instead of threading pointers
through IP header overlays, add a "queue element" structure to do
the threading, and point it at the ip headers.
1995-11-21 01:07:34 +00:00
40a4907f5e
oops; i forgot these u_int -> size_t conversions.
1995-10-20 01:35:25 +00:00
51f39e4840
fix prototypes here, to match u_int->size_t changes in ufs.c
1995-10-20 00:54:17 +00:00
6c46625cf7
cast pointer to long, not int
1995-10-20 00:47:47 +00:00
2677a05d99
fix spacing in header 'room to leave' comment
1995-10-20 00:46:30 +00:00
e7290be2cd
add prototypes for static functions. make ffs_oldfscompat static.
...
fix some arguments and structure members, in recognition of the fact
that (u_int == u_long == size_t) is not true on all systems.
1995-10-20 00:42:21 +00:00
600acb3b06
Conditionalize ancient `@' and `#' erasors.
1995-10-11 21:16:57 +00:00
1f494d0265
Don't add network files to SRCS if NO_NET is defined. (I'm getting
...
very short of disk space on STEELHEAD!) The pc532 doesn't use the
network (yet?) from boot.
1995-10-01 06:00:32 +00:00
de4e651542
Careful with initializers.
1995-09-27 23:14:57 +00:00
df8c694f7e
Add an inet_addr() function; return network-order numeric representation
...
of an IP address from `aa.bb.cc.dd'-style text input.
1995-09-23 17:14:40 +00:00
23ee56022d
Cleanup, and catch up with libsa changes.
1995-09-23 03:42:17 +00:00
6f2a9404ee
More cleanup: change some private types to eliminate casts,
...
replace some "goto xxx" with return(-1). (mostly cosmetic)
1995-09-23 03:36:06 +00:00
bdad6c4104
Fix/improve some comments.
1995-09-23 03:31:50 +00:00
c9a13fa080
Assume that if devopen() points `file' at a NULL that a raw device was
...
opened (as opposed to only checking to see if `file' itself is NULL).
1995-09-19 09:16:52 +00:00
d9124da47f
Another round of clean up, including fixes presented by Matthias Drochner
...
(PR#1404). Things to be noted:
- all IP addresses are now `struct in_addr's.
- the function rarp_getipaddress() no longer return `myip'; in stead
it returns -1 on failure (errno set), 0 on success. `myip' is set
as a size-effect.
1995-09-18 21:19:18 +00:00
f5cf4bbc37
De-activate DEBUGFLAGS again.
1995-09-17 01:01:07 +00:00
82e5cf06bc
Revert fs_ops read/write declarations; these return error numbers.
...
Get rid of some more compiler warnings.
Set errno where appropriate.
1995-09-17 00:49:37 +00:00
84c517c128
Clear up some size_t/ssize_t confusion.
1995-09-14 23:45:21 +00:00
0c92121b3f
Mirror libkern makefiles.
1995-09-14 20:55:00 +00:00
0081434965
Correct the padding to min Ethernet packet size.
1995-09-13 15:06:12 +00:00
eb50acd998
Changes from Gordon Ross:
...
a) check against `my' ethernet or broadcast addresses done in
ether.c
b) changed interface to readether() to provide ethertype info
c) respond to arp requests when appropriate.
First two are clean-up. Last fixes hp300 and presumably mvme68k netboot
code.
1995-09-11 21:11:36 +00:00
07f70f97f1
Avoid calling device-close routine when open() not completed. Otherwise you
...
lose if this sequence occurs: open()->devopen()->...->panic()->closeall().
1995-09-06 19:53:27 +00:00
848dfdfec6
Fix bogus numerical conversion by using sprintf();
1995-09-03 20:56:14 +00:00
8ede82abe2
Merge an sprintf() in.
1995-09-03 20:51:21 +00:00
904eed507d
Add a driver hook to the `netif' structure.
1995-09-03 20:49:38 +00:00
b090a64678
Add bcea[] here now that is is gone from arp.c
1995-08-08 20:59:07 +00:00
9800370998
Fix off-by-one error when padding text segment.
1995-08-04 07:37:03 +00:00
fb56ae3095
Kill extra declaration of bcea[]. It's also defined in globals.c.
1995-08-04 01:17:26 +00:00
0a035e5e9f
Can not use htonl() in static initializers. (Fixes PR 1188)
1995-07-03 04:56:33 +00:00
2d83203f6a
Build all RPC requests with AUTH_UNIX (thanks to Chuck Silvers)
1995-07-03 02:59:16 +00:00
b4c3997cb9
Support functions for NFS boot (get server address and root path).
1995-06-27 15:32:40 +00:00
539a3bff11
Modified to do less copying, and to allow determination of
...
the address from whence the reply has come.
1995-06-27 15:28:58 +00:00
1fe28794f3
Fix ARP opcode, add more debugging prints.
1995-06-27 15:27:24 +00:00
55eb5a12f1
Re-work for new rpc interface, and simplify a bit.
1995-06-27 15:25:30 +00:00
d7e1ef6af2
Pad HEADER_SIZE for alignment.
1995-06-27 15:23:18 +00:00
0e4efb30ef
Pad the request out to the minimum Ethernet length.
...
Improve some debug prints...
1995-06-27 15:18:57 +00:00
6897f39ae9
Various cleanup, including:
...
* Convert several data structures to use queue.h.
* Split in_pcbnotify() into two parts; one for notifying a specific PCB, and
one for notifying all PCBs for a particular foreign address.
1995-06-12 00:46:47 +00:00
8e179d8e95
Have netboot!
1995-06-09 22:02:39 +00:00
dd614d8474
parenthesize macro arg usage
1995-05-16 05:26:36 +00:00
05af191f3b
spacing fixups and KNF. #define ether address size, so it's not
...
hardcoded as '6' all over.
1995-05-15 01:30:44 +00:00
b835913465
first arg to open() is a 'const char *'. pointed out by David Brownlee
...
in pr 1004.
1995-04-30 03:57:54 +00:00
586427643d
various attribute poisoning, don't be as quick to specify size of files[]
1995-04-22 13:57:03 +00:00
4316c36ca7
cast pointers to longs
1995-04-22 13:53:48 +00:00
07231e5b52
note properly whether or not functions return, etc.
1995-04-22 13:51:19 +00:00
60b1ffa877
cast ptrs to longs, etc.
1995-04-22 13:50:27 +00:00
06b2dbd4dd
cast ptrs to longs.
1995-04-22 13:47:52 +00:00
84d0d2f495
various type fixups
1995-04-22 13:46:50 +00:00
c03b53c2e8
spacing cleaup. also, minor type mixup fixups.
1995-04-17 05:32:52 +00:00
b5b72d26ea
be a bit more careful and explicit with types. (basically a large no-op.)
1995-04-13 06:25:36 +00:00
2f30839b62
Remove now unneeded #ifdef. Prototype new function.
1995-04-10 00:06:54 +00:00
6efcd1b6d4
KERNEL -> _KERNEL
1995-03-29 21:57:43 +00:00
7c04233887
KERNEL -> _KERNEL
1995-03-26 20:23:52 +00:00
af55380e5a
remove references to arptnew. fix spelling error
1995-03-06 19:06:05 +00:00
48b5b94c4f
fix some typos. from frank@fwi.uva.nl (Frank van der Linden)
1995-02-27 09:10:24 +00:00
3757efcbfc
Clean up a little.
1995-02-21 10:14:53 +00:00
97cf758f6d
Add EFTYPE.
1995-02-21 07:52:45 +00:00
cba39e9e88
Correct some error strings, and add a few more. Don't print error messages in
...
exec(); let the caller do it.
1995-02-21 07:38:37 +00:00
248e7ebfb0
Update prototypes.
1995-02-21 07:16:24 +00:00
d031ff677c
exec() doesn't need to return a value.
1995-02-21 07:14:37 +00:00
2af23945b3
Add the security check in the hp300 code, and clean a little.
1995-02-21 06:56:06 +00:00
2d7464c4b9
Add a generic twiddler.
1995-02-21 06:33:22 +00:00
258efc53df
Various:
...
* Fix some misused types.
* Encapsulate the protocols better.
* Rearrange the RPC stuff to work more like the kernel. (Needs more work.)
* Remove a bunch of extra hair when reading a file over NFS.
* Use RPCAUTH_UNIX when talking to the NFS server.
1995-02-20 11:04:00 +00:00
fcf2c007f3
Define netif_debug in here.
1995-02-20 00:19:09 +00:00
ffd9c97e2a
Add some more diagnostic info. Increment the xid in a better place.
1995-02-19 23:52:18 +00:00
ad21848143
Adjust the attribute info size for our NFS code.
1995-02-19 23:51:39 +00:00
61c45cc32e
Remove duplicate defn of bcea.
1995-02-19 17:04:46 +00:00
dcb3f5a8b8
Better fix for the last.
...
Worked this out together with Darren Reed.
This one fixes several bugs, plus it's closer to the original
1995-01-07 20:53:31 +00:00
2f25eb5231
Update symbolic-link handling, from Darren Reed.
1995-01-06 00:22:58 +00:00
9df57d6a8e
round text segment to __LDPGSZ bytes
1994-11-25 23:08:31 +00:00
6ac2bbfc35
be more careful with types, also pull in headers where necessary.
1994-10-30 21:43:03 +00:00
6668f51c96
new RCS ID format.
1994-10-26 05:44:32 +00:00
6f0b0cdc86
Cleanup to make more ANSI compliant; checkpoint
1994-08-22 21:55:58 +00:00
ff05bd4bc1
Echo terminating NL too.
1994-08-09 14:00:06 +00:00
c2e9be0873
Make libsa compile again by not including sys/errno.h
1994-08-04 19:39:32 +00:00
d5bc01994f
include libkern.h
1994-07-27 07:58:45 +00:00
de29b5d301
get includes from sys, and define KERNEL
1994-07-27 07:40:52 +00:00
20b21822a4
use ALIGN, rather than hard-coded numbers
1994-07-27 07:39:17 +00:00
ab51cf264b
make bcopy work for overlapping regions, as is standard.
1994-07-27 07:38:17 +00:00
4b0d7d9d90
get rid of someone else's bravery (stupidity)
1994-07-27 07:37:25 +00:00
5b619bed0f
Add some more constants.
1994-07-24 01:22:01 +00:00
fc5405fc33
do echo.
1994-07-18 18:42:06 +00:00
8e2c980509
Avoid descriptor leakage.
1994-07-18 18:41:12 +00:00
b4a094da43
Include ffs_oldfscompat() from ffs_vfsops.c; enables booting from pre-44
...
filesystems (on big-endian machines).
1994-07-18 13:08:09 +00:00
cf92afd66e
New RCS ID's, take two. they're more aesthecially pleasant, and use 'NetBSD'
1994-06-29 06:29:24 +00:00
c6a70c0ca9
Further adaptions to 4.4-lite header files.
1994-06-20 08:39:01 +00:00
d2ec31313f
make it compile w/4.4-lite header file changes
1994-06-20 07:50:17 +00:00
d649b1e46a
s/REVARP/ARPOP/
...
(duh; thanx Gordon)
1994-05-31 04:26:31 +00:00
07b4f2ab54
Update to 4.4-Lite networking code, with a few local changes.
1994-05-13 06:02:48 +00:00
e03842d0c7
Standalone networking for network boot loaders.
1994-05-08 16:11:14 +00:00
381f4cb170
set errno.
1994-03-01 20:57:56 +00:00
2c2ca1351c
Don't use aggregate initialization;
...
Add memcpy().
1994-02-26 10:29:41 +00:00
d7038296be
Multicast is no longer optional.
1994-02-02 05:58:50 +00:00
8854a8d447
Clean up deleted files.
1994-01-26 03:21:46 +00:00
36b52a824e
CMU/4.4 stand-alone library
1994-01-26 02:03:32 +00:00
4fe12e6e88
Fix some inconsistent spacing; spaces at the end of lines, etc.
1994-01-08 21:21:28 +00:00
49c0e9bead
"struct ether_addr" for ethers(3) functions.
1993-12-30 04:17:40 +00:00
5097691559
>From cmaeda@cs.washington.edu; part of the multicast patches derived
...
from the Multicast patches for BSDI.
(I am a "big dopey bear" for having forgotten this. Thanx Havard.)
1993-12-13 15:10:40 +00:00
40c0c0a558
Add definition for reverse address resolution protocol.
1993-09-05 00:52:15 +00:00
45a57e79ea
more rcsid additions and file header cleanups
1993-05-20 03:49:51 +00:00
235bd1db44
Add consistent multiple-inclusion protection.
1993-04-19 03:45:34 +00:00
61f282557f
initial import of 386bsd-0.1 sources
1993-03-21 09:45:37 +00:00
cjs