14bc6c9eb8
Add PHYs.
2000-01-25 14:43:49 +00:00
6b26a49ee9
Use MII device layer.
...
XXX still 100Mbps receive side is very slow...
2000-01-25 14:38:39 +00:00
492bfe70f3
get the device name from pcidevs instead of having a list here
2000-01-25 14:34:24 +00:00
0335569abc
Make it compile even if you leave out the ucom attachment.
2000-01-25 13:56:23 +00:00
a27ee91364
Remove an item.
2000-01-25 13:27:07 +00:00
a119cb3677
In the diagnostic check in config_detach, inform the name of parent and
...
its child who shouldn't be exist.
2000-01-25 13:23:26 +00:00
2486935741
Use .Ar macro for argument.
2000-01-25 13:06:51 +00:00
b29a1709da
Add a line about USB Ethernet adapters.
2000-01-25 12:15:32 +00:00
4a961a7fc3
some code cleanup
2000-01-25 12:09:19 +00:00
f0ebd281e5
Add done method for root control transfers.
2000-01-25 12:06:21 +00:00
73ce2abd33
Make sure PIRQD enable bit is set. From FreeBSD.
2000-01-25 11:26:06 +00:00
dccf05f858
Do pccbb_chipinit() after YENTA register space allocation.
...
Add TI PCI 1451 PCI-CardBus entry.
2000-01-25 09:36:43 +00:00
b1f85ee905
Don't put leading space, otherwise diskerr() prints unnecessary space
...
like this:
wd0h: aborted command reading fsbn 650256 of 650256-650271 (wd0 bn 839056; cn 888 tn 13 sn 17), retrying
2000-01-25 09:33:12 +00:00
855fe23671
Prevent possible wayward loop.
2000-01-25 09:30:00 +00:00
65c138fea0
- Print a name of root device even if it is a network device.
...
- If RB_ASKNAME, only dumpdv holds the results asked interactively.
Examie dumpspec only when !RB_ASKNAME. This allows us to override
dumps on none in kernel config file by booting kernel with RB_ASKNAME.
- Slightly rearrange code so that it more matches to comment.
2000-01-25 09:23:59 +00:00
5cb9984dd0
Replace long delay with sleep.
2000-01-25 09:17:35 +00:00
012a23a770
Use config_pending and let the kernel thread to attach a card even on boot.
2000-01-25 09:14:27 +00:00
f18e32d670
Regen.
2000-01-25 09:06:50 +00:00
7b4d7aaba1
Add TI PCI 1451 PCI-CardBus bridge.
2000-01-25 09:04:03 +00:00
beaf3d82fc
Ooops, add another ucom file.
2000-01-25 08:46:00 +00:00
6cd67182f5
Add ucom(4) man page.
2000-01-25 08:45:24 +00:00
85fcd0b58d
Update for the ucom(4) addition.
2000-01-25 08:31:56 +00:00
a2b1ac707a
Split the umodem driver into two parts: the part that emulates a tty over
...
two bulk pipes, and the setup and status fiddling goo.
This allows the former part to be shared by other drivers that need to
look like a tty.
2000-01-25 08:12:58 +00:00
509c38cc44
Regen.
2000-01-25 08:07:14 +00:00
6a4d06f322
Use the Ethernet vendor ID to differentiate multiple cards with the same
...
vendor,product pair. (Yuck.)
2000-01-25 08:06:49 +00:00
05ceaaaad5
Add UniNorth.
2000-01-25 07:19:11 +00:00
dfee5c0f62
crank version
2000-01-25 07:14:11 +00:00
61d86056a0
work around bug in apache 1.3.9 which incorrectly puts a trailing
...
space after the chunksize.
noted by Jun-ichiro itojun Hagino <itojun@itojun.org> in [bin/9096]
2000-01-25 07:13:45 +00:00
03ebb087f7
Regen.
2000-01-25 06:53:26 +00:00
4d836ce7f2
Fix product code for Aironet PC4800. Should be 0x0007.
2000-01-25 06:52:54 +00:00
ec9eefea83
be harsher about workaround
2000-01-25 06:45:18 +00:00
b5064330de
The cfe is initialized to the default entry, when a table entry value
...
is present don't OR in the flags with the defaults, replace them.
2000-01-25 06:36:17 +00:00
b50b01e020
Don't enable the interrupt until after we cycle the power, disable
...
interrupt at disable, and make this code look more like the std pcic
code. From Mycroft and I.
2000-01-25 06:16:34 +00:00
3d237fafa8
Fix a buglet that caused media-specific options to *always* be printed, even if
...
they were not set.
2000-01-25 06:11:25 +00:00
852392d00d
work around lame ftpd's that don't return a correct post-Y2K date in
...
the output of `MDTM'.
obviously the programmer of aforementioned lame ftpd's did something like
"19%02d", tm->tm_year
instead of
"%04d", tm->tm_year + TM_YEAR_BASE
fixes [bin/9289] by jbernard@mines.edu
2000-01-25 06:11:00 +00:00
8c090e4862
set havenet to 0 when we are switching between operating modes and only
...
after association in ifrastructure mode. Also, deal with roam start
and rejoin net commands.
2000-01-25 05:32:28 +00:00
be3c43687c
Make sure the latency timer is set to a reasonable value.
...
From Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp>.
2000-01-25 03:44:27 +00:00
047cc5e94f
Cleanup setroot() a bit:
...
- No longer necessary to use goto, just breaking the loop like other case
is enough.
- Don't caliculate loop invariant every time. Just reuse.
2000-01-25 03:42:36 +00:00
35f3518a91
Fix a fatal typo in a Pyxis SGMAP TLB bug workaround. Noticed by
...
Jeff Roberson <nomad@nop.aliensystems.com>.
2000-01-25 03:32:36 +00:00
c4d8a60bac
Handle Cobalt Networks interfaces, which are 21143 pass 4.1 devices
...
with a simple (MAC address only) SROM format.
From Soren S. Jorvang <soren@wheel.dk>
2000-01-25 03:23:56 +00:00
8f7ad1f798
When checking for a non-standard address ROM format, allow the
...
Cobalt Networks address ROM through.
From Soren S. Jorvang <soren@wheel.dk>
2000-01-25 03:14:12 +00:00
ea0751f1aa
Finish with fixing the SOFTCURSOR stuff.
2000-01-25 02:44:03 +00:00
45eb896114
add note on how to umount (as user), using amq.
...
Hint taken from a posting on tech-kern by
Wolfgang Rupprecht <wolfgang@wsrcc.com>
2000-01-25 02:39:52 +00:00
e08a62088a
fix spelling mistake
2000-01-25 02:38:55 +00:00
3949f8e60b
new manpage for raylink/aviator pccards
2000-01-25 02:28:43 +00:00
8cb2edab13
Removed code that would squash root's path when suing to root,
...
restores old behaviour of su.
2000-01-25 02:19:19 +00:00
409e9f1b38
Fix a logic buglet in status printing code.
2000-01-25 02:16:57 +00:00
4be7a36436
Add Raytheon RayLink.
2000-01-25 01:50:12 +00:00
efe1032de0
- Print 802.11 status (i.e. network ID) after mtu, etc. but before
...
protcol addresses.
- When searching for status bits, use the currently selected media type,
not the currently active media type.
2000-01-25 01:46:57 +00:00
43311a870f
Regen
2000-01-25 01:17:40 +00:00
tsubai