Implemented a more sophisticated mechanism for handling transmitter
interrupts which now defers them until the transmit queue if filled
up with completed buffers. This has two advantages: first, it reduces
the number of transmitter interrupts to just 1/120th of the rate
that they occured previously, and two, running down many buffers
at once has much improved cache effects.
Defer rundown (m_freem) of completed transmit buffers for no longer
than 1 second.
This brings us up-to-date with the most recent "fxp" driver in FreeBSD.
directly. That would require that we map the scsipi_xfer into DMA
space. Instead, copy to/from the NCR CCB, which the script already
has to DMA to/from. These copies are small, and don't seem to affect
performance.
Separate the ncb (i.e. softc) members that are accessed by the script into
a separate structure. Allocate one of these structures in DMA safe memory
using bus_dma, and change RELOC_SOFTC to use the DMA address of this
structure.
"If a channel has no drives, do *not* unmap its I/O regions.
It's not really safe to use them for anything else, and in legacy mode it
will just cause us to probe the channel again as an ISA device."
- keep the modes supported by the drive in struct ata_drive_datas (will be
later used for downgrading the DMA/PIO mode on error)
- use config flags to force/disable PIO/DMA/UDMA modes
- For the CMD PCI0643/6 setup DMA mode to DMA Read multiple.
was stuck in the while (!(cbp->cb_status & FXP_CB_STATUS_C)); loop,
I think because the relevent CPU cache entry was never updated.
This was on a compaq deskpro system.
eg the Cypress ISA bridge:
-put channel mapping into the chip specific part, unify with
channel_probe() into channel_map()
-use pointer to channel data as function call argument wherever possible
instead of the channel number
-allow the "compat" channel number to differ from the per-controller
channel number - for mapping and interrupt functions
-add support for SiS5598 and Cypress 82C693 chips
Mostly done by Manuel, I only contributed to the first 2 items.
- returned EOPNOTSUPP rather than -1.
- no check for negative offset.
many of these fix potential security problems in these drivers.
XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
paddr_t (*d_mmap) __P((dev_t, off_t, int));
by someone!
when this driver was changed to use the MAC-independent MII code. This
"PHY" does not have a programming interface, but simply senses the duplex
mode from the link partner. Since it is not possible to read the 80c24
to determine the link type or status, we consider this to be "manual".
Don't claim DMA support if we don't have explicit support for this chip.
They're to may way to loose when trying to use DMA without configuring the
controller and disks.
in the printing of DMA mode (piix3/4 only)
others: set the debug_mask to 0, so that debug messages are turned off by
default but can be easily turned on.
Reset drive_flags to 0 for unconfigured devices, so that they are ignored
later. For configured devices, reset state to 0 after probe/attach.
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090, from Matt Jacob.
Add vendor ID for ESS Technology Inc.
Add product ID for ESS Technology ES1938 SOLO-1 AudioDrive
Add product ID for Fujitsu K56flex LTMODEM
Add product ID for TI PCI1250 PC Card bridge
Add product ID for Trident Cyber 9397 Video controller.
descriptor count gets miscounted on txprobes. The second (and more
important) is that transmit stalls should now be fixed. The problem
was not due to lack of ring resources but dmamaps. When Jason changed
the driver to use pre-allocated maps (instead of the dynamic ones I
used), and when there were no more maps, the driver just gave up instead
of calling tx_intr to free any transmitted but unreclaimed dma maps.
Since there was nothing being transmitted, no transmit interrupts
would fire to restore things (and OACTIVE prevented other transmits
from happenning). So it stayed starved until another interrupt cause
(like a received packet) "woke" it up.
-use of uninitialized variable in attach (mostly harmless)
-removal of dead code in attach()
-fix of interpretation of SIA blocks on >=21142 (serious, caused strange
things with 10Mbit)
egcs won't attempt to optimize inline copies of them into a single
load/store (the RFA is not 4-byte aligned in the DMA area).
Just use memcpy() to copy those fields, now, not our own home-grown.
cursor code. These are unneeded on the Bt485, since the RAMDAC handles
the hardware cursor. They are needed for the Bt463, however, since the
RAMDAC only provides cursor color.
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
if i drive is responding):
-if the reset succeeds, check some registers to make sure there is really
a drive (and not a chipset which echoes back the last written value)
-explicitely select the master before trying to read the master's status
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
if_tlvar.h, since the ThunderLAN PHY driver needs to know some things
about it's parent (and since it can only attach to a ThunderLAN chip,
this is the easiest way).
associated with any observed lossage...it was just noticed while reading
ncr_start().
g/c some now-unreachable code produced by the earlier race condition fix.
* Use the new trigger_{in,out}put interface.
* Allow the play and record channels to have different encodings (but the
same sample rate).
* Play u-law and a-law as 16-bit data. (This may not work yet...)
>We're not Linux. If we still want driver version strings to be displayed
>at boot, then I suppose DEBUG is a reasonable compromise.
Makes the whole concept useless. This is for default printouts. If you
can build a debug kernel, you know what version you have. This was under
the concept of 'RAS' so that hapless users could tell you microversion
things. But I guess this isn't the right way according to our local
Jesuits. Oh, well. I'll think up something different and hopefully
less objectionable. And yes, NetBSD isn't linux. The developers seem
to be equally bad tempered, but linux is more successful.
Part B:
Field interrupts in OS layer so that (in this OS) bus_dmamap_sync(POSTREAD)
can (formally) ensure that the result queue is stable wrt to buffering
and that for sending a command a bus_dmamap_sync(PREWRITE) is done to
ensure that the device gets a good view of what the mailbox contents
should be.
which contain 'standard' com- and lpt-type ports. Some of these present
as PCI simple-communications/serial or simple-communications/parallel
devices, but many do not. (Additionally, there is no document that I can
find that describes the "specific well-konwn register-level" description
of how the 'standard' devices' config space headers shold work.) Eventually,
some of the devices driven by this code should become simple pci attachments
for the 'lpt' and 'com' drivers, but that requires solid documentation.
the BAR-printing function to print a name for the register, factor out
a common register-bits function which can handle the fact that type 2
headers have a different size than is usual, and actually do something
useful with the rest of the bits in the type 2 header.
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
used in the SMC EtherPower II.
Media control isn't yet supported, due to some MII infrastructure
problems which I hope to address soon. This isn't a huge deal, since
the PHY defaults to auto-negotiate mode.
Also, the device just programs the multicast hash table to accept all
multicast, to avoid a hardware bug that causes the multicast address
filter to lose in 10Mb/s mode. This bug will be fixed in a more sane
way once the media control issues are dealt with.
of last resort when trying to communicate information about
bogus behaviour of PCI devices to the MI autoconfiguration code.
In general, bogus behaviour should be handled by drivers, but there
are some types of bogons which can't be addressed that way. The
only quirk currently defined is one which indicates that the device
is multi-function even though the device's header says otherwise.
(Mmm, Intel 82371FB PCI-to-ISA Bridge (PIIX); you'd think that at least
Intel would have gotten it right...)
of functions on a given device. Also, clean up the #if 0'd
major-debugging-spew code so that it's all one piece, so that
it's a bit prettier, and so that it prints out quirk information.
of last resort when trying to communicate information about
bogus behaviour of PCI devices to the MI autoconfiguration code.
In general, bogus behaviour should be handled by drivers, but there
are some types of bogons which can't be addressed that way. The
only quirk currently defined is one which indicates that the device
is multi-function even though the device's header says otherwise.
(Mmm, Intel 82371FB PCI-to-ISA Bridge (PIIX); you'd think that at least
Intel would have gotten it right...)
printing into a function, add a bit more pretty-printing of existing stuff.
Implement pretty-printers for type 1 and type 2 headers. (Right now,
these are just quick stabs based on some on-line bridge docs that I have
handy on my laptop. Mmmm, meetings. I'll check the bits when I get
back within reach of my official docs.)
thorpej