call remotesyst() only when login has been successful
some servers don't let you run SYST until you've successfully logged in.
* in fetch_ftp(), always call setpeer() with autologin disabled, and use
the following ftp_login() to DTRT.
this prevents ftp from trying to login a second time if the first autologin
fails when connecting to a remote site anonymously using autofetch.
* reset unix_proxy and unix_server in cleanuppeer()
* missed a function conversion in the KNF sweep...
typedef void (*sigfunc) __P((int));
and replace use of sig_t and void (*)(int).
certain other OSes define sig_t differently to that (they add extra arguments),
and it causes problems due to function mismatches, etc...
* fix bug where the second press of <TAB> on an empty word (i.e, list
all options) may have resulted in an strncmp() against NULL. (detected
by _DIAGASSERT())
EL_RPROMPT support i added to editline(3).
- allow $FTPPROMPT and $FTPRPROMPT to override defaults for the relevant
prompts
- move `%' formatting code from prompt() to expandbuf().
- implement `%.' and `%c', similar to the same % codes in tcsh(1)
(functionality I added to tcsh nearly 6 years ago), except that `%.'
always does `...trailing' and `%c' always does `/<x>trailing'.
- unknown `%foo' codes get printed as `%foo'
to contain the remote working directory.
- add `set prompt', a user configurable prompt. (defaults to `ftp> ').
the following escape characters a la tcsh(1) are supported: %/, %m,
%M, and %n.
- add global var `username'; used by prompt code
- fix a couple of minor memory leaks
- bump version
- add `usage'; displays the usage of a command.
implemented by calling the c_handler() with argc = 0, argv = "funcname".
- add `passive auto'; does the same as $FTPMODE=auto.
- add `set [option value]'; display all options, or set an option to a value.
- add `unset option'; unset an option.
- add getoptionvalue() to retrieve an option's value, and replace a few
global variables with calls to this.
- implement cleanuppeer(), which resets various bits of state back to
`disconnected'. call in disconnect() and lostpeer().
- support completing on `options'.
- improve recovery after a SIGINT may have closed the connection.
XXX: there's still a couple to fix
other stuff:
- various consistency fixes in the man page.
- ensure that the command usage strings in the code and man page match reality.
- mput/mget: check that the connection still exists before each xfer.
- minor cosmetic changes in confirm().
- set code correctly in sizecmd() and modtime()
- don't need \n in err() strings.
- change lostpeer to take an argument (rather than casting (sig_t)lostpeer
in signal handlers)
- knf and whitespace police.
* simplify main loop (don't need `top' variable any more)
* use a struct sockaddr_in6.sin6_addr for the result from inet_pton(),
rather than u_char buf[16]
* add a few more comments
* confirm(): move from util.c to cmds.c. display mnemonic string in its prompt.
add support for `q' (terminate current xfer), `?' (show help list)
* in various signal handlers, output a linefeed only if fromatty.
* if fgets(stdin) returned NULL (i.e, EOF), clearerr(stdin) because you don't
want future fgets to fail. this is not done for the fgets() in the main
command loop, since ftp will quit at that point.
* unless ftp is invoked with -a, don't retain the anonftp setting between
hosts (`ftp somehost:' sets anonftp, but you don't want that to `stick'
if you close that connection and open a new one).
stage. if this occurs, just call lostpeer() to close the connection. whilst this
might be considered brutal, it's also extremely handy if you're impatient or there's
lossage at the remote end.
don't save the signal mask on some foreign systems.
* ensure signal handlers don't use stdio and do reset errno if they
don't exit with siglongjmp()
* use a common SIGINT handler for {send,recv}request()
* implement xsignal_restart(), which only sets the SA_RESTART flag if
specifically requested
* xsignal() is now a wrapper to xsignal_restart(). INFO, USR1, USR2 and WINCH
are restartable, ALRM, INT, PIPE and QUIT are not.
* improve getreply()'s timeout code to take advantage of the above.
other changes:
* improve wording of how globbing works for `classic' URLs (host:path).
suggested by John Refling <johnr@imageworks.com> in relation to PRs
[bin/8519] and [bin/8520]
* always compile in the `edit' command even if NO_EDITCOMPLETE defined.
it's just a no-op in the latter case, which is more consistent to
the users.
* always compile in about: support (i.e, remove NO_ABOUT).
i'm entitled to some vanity in this program...
* clean up some whitespace
to "extern" if it's not set. define GLOBAL to (empty) in main.c.
this effectively moves all the globals into main.c whilst retaining
namespace access to them in other source files.
(global vars in header files confuse foreign linkers)
should be in host order. found/fixed by Matthias Pfaller <leo@dachau.marco.de>
* parse_url(): improve checking of portnum, and add an extra argument to pass
back the parsed portnum to the caller (reduces a bit of code duplication)
* Move the KAME/WIDE copyrights after the BSD/TNFi ones. Since there was
significantly less code added under the former, it's only fair on the latter.
lpage page local files
pdir as dir, but through your $PAGER
pls as ls, but through your $PAGER
* implement docase() (a la dotrans() et al) and use appropriately, rototilling
some duplicated code
* globulize(): modify to return a pointer to the strdup()ed result in all cases,
and hack the code that calls it to take this into account
* replace strcpy() and strncpy() with strlcpy()
* put(), getit(): use some aptly named local vars instead of argv[...]
* delint
prototype for idle() in <unistd.h> (which i thought was against namespace
and sensibility guidelines, but...)
* consistently use xsignal() instead of signal(). we get known behaviour
in all cases (SA_RESTART), which is good for some borken foreign systems.
* remove signal.h from most files; it's unnecessary now
* fetch_url(): use `long chunksize' instead of ssize_t; it's more portable, and
we're setting chunksize with strtol() anyway
* xsignal(): only use SA_RESTART if it exists. SunOS 4.x doesn't have it
but has the inverse (SA_INTERRUPT). the original function i was inspired
from had this support (lib/signal.c, W. Richard Stevens' `UNP 2nd ed Vol 1').
* remove <termios.h> from util.c; it should be unnecessary now
it's more portable and more obvious
* remove the mkgmtime() && HAVE_TIMEGM stuff:
a) why should netbsd have to define HAVE_TIMEGM to compile cleanly?
b) foreign compiles of ftp should just be linked with working
timegm function
a more portable version of this ftp client will be released as a 3rdparty
product; no use polluting our code with half-baked attempts...
* document the above three commands
* rototill the way the sndbuf and rcvbuf work. remove resetsockbufsize()
* use the appropriate socket buffer size as the size of the buffer that
the read()/write() loops use. speeds up things in some cases.
the an empty directory (e.g, between `some' and `path' in
`ftp://host/some//path'), then execute `CWD ' (without a path).
This command will probably fail on rfc 959 compliant servers, so
issue a warning in this case and bail. [noted by cgd].
(i wonder if the people who wrote rfc 1738 actually realised that this
requirement appears to contravene the spec for `cwd' in rfc 959 ?)
* replace isurl() with isipv6addr(), and use appropriately. fixes
auto-login with `classic ftp URLs' (e.g, `ftp somehost:')
* cleanup and rework some of the ipv6 stuff in parse_url()
* prevent potential coredump in fetch_ftp() when parsing `;type=X'
* KNF a few lines
* fix a couple of comments
* cleanup the man page a bit
this is mainly for (hypothetical) ftp server which disconnect clients
that use EPSV/EPRT. I've never seen any ftp server like this, but
epsv4 command may be of use when such an ftp server is found.
features:
---------
* transfer rate throttling with the new `rate' command. syntax:
rate direction [max [incr]]
where direction is `all', `get' or `put'.
if max is not supplied, the current settings are displayed.
if max is supplied, then transfers in the given direction will
be throttled to this value.
if incr is supplied, the increment for the `on-the-fly' scaling
will be set to that, otherwise `1024' is used.
currently implemented for binary get, binary put, and url fetches.
not yet supported for ascii get or put, or local file copies.
* on-the-fly scaling of the throttle based on signals:
- SIGUSR1 raises the throttle rate by the increment for that direction
- SIGUSR2 lowers the throttle rate by the increment for that direction
* -T dir,max[,incr] option to set rate from the command line
* `k', `m', `g' suffix support for bytecounts in the `hash', `rate',
`rcvbuf' and `sndbuf' commands)
bug fixes and code mods:
------------------------
* fix up ftp_login() so that ruserpass() is always called, even for
command-line url fetches.
* implement strsuftoi(), which parses a given number into a int with
suffix support. replaces getsockbufsize()
* implement parserate(), which does the argv parsing for -T and rate
* save and restore errno in signal handlers (may not be necessary, but
it doesn't hurt)
notes:
------
the rate command has had reasonable testing, but I'd like feedback
if it doesn't do the right thing, especially from people on slower
(i.e, modem) links.
I haven't tested the rate throttle against a http server which does
`transfer-encoding: chunked' because I couldn't find a server to
test against.
NO_PROGRESS. -DSMALL still implies all of those. progress meter support
isn't necessary for the smallest possible ftp client, but it adds very
little space and makes users' lives much better. Therefore, it should
be enabled for installation media if at all possible.
* fix fetch_ftp() so that hcode parsing is not done for file:// urls
(a } in the wrong place, and code at the wrong indent level...)
* change outfile to being a global (so it gets correctly reset)
* change parse_url to not remove leading '/' for non ftp urls.
whilst this is not totally rfc1738 compliant, other code kinda
assumes this is the case, and it doesn't hurt
* implement ftpvis(), which \ quotes the following in the given string:
SP, TAB, \, CR, "
* use ftpvis() in complete_ambiguous(), to escape characters in a word
which would confuse makeargv()/slurpstring().
1. changed to use timegm(3) on NetBSD and
2. supply alternative code for other Unix-like OSs
(NetBSD ftp shall be portable for some reasons :-).
This fix closes PR #6448.
NOTE: This should be fixed again if a portable UTC to time_t
conversion method is specified in some standards.
* support $no_proxy, which is a comma or space separated list of
host[:port] elements for which proxying is to be disabled.
(asked for by cgd in [bin/5027])
* if $FTPANONPASS is defined, use that as the anon ftp password
(instead of "`whoami`@")
* allow http URL's without a filename as long as an output file
is specified.
other stuff:
* implement parse_url(), which breaks up a URL into its bits, and use.
* simplify url_get() and auto_fetch() to use parse_url() and to not
modify the supplied URL or a copy of it.
* implement xmalloc() and xstrdup(); error-checked malloc()/strdup()
* add more consistency to messages, quoting strings in output as `%s'
remove server from using a persistent connection, which speeds
up such requests.
* support http 301 and 302 redirects
* rewrite guts of url_get() to use fparseln() et al instead of
read(s,&p,1)... enables each in the header to be parsed
as necessary
* rename login to ftp_login, to remove conflict with util.h::login
* cleanup verbose messages during http proxy requests
which in turn can allow the use of larger TCP windows. This is a work in
progress; there is not yet support for specifying global defaults or
user prefrences on a host/network basis.
* default to passive with active fallback. $FTPMODE modifies this behaviour.
-A forces active connection.
* support '-o outfile' for auto-fetched files. outfile can be a file,
`-' (for stdout), or '|command' (to output each file through command).
* support '-r waittime', which retries the connection after waittime seconds
if it fails.
* fix 'page file' when restart is non-zero.
* try all ip-addresses of a host in a http fetch (as the normal ftp fetch
does).
XXX: a ``broken pipe'' error sometimes occurs with -o '|command';
i haven't tracked this down yet.
doesn't use garbage for the username. from "Soren S. Jorvang" <soren@t.dk>
in [bin/4559]
* use in_port_t for ports, and USHRT_MAX instead of 0xffff
(from millert@openbsd.org)
* use `NULL' instead of `(.... *)0' where appropriate.
where a remote completion or `mget' would confuse the client a `restart'
had been issued beforehand. now, `restart' is remembered until an operation
that can actually use it is invoked.
* in sendrequest(), don't reset restart_point upon entry. fixes `restart'
for `put' operations.
* if `restart' is invoked with no arguments, print current setting instead
of displaying a usage
* consistently use printf("%qd", (long long)restart_point) when displaying
restart_point
* use strto[lq]() instead of atol() when parsing `mark' and `restart' values
* remove unnecessary strlen()s when result of previous snprintf() will do
* replace a few malloc()/strcpy()s with strdup()s
* use SECSPERHOUR instead of '3600'
* don't interpret '-' or '|' when a local filename is determined from
the remote name (i.e, in mget, and in get with only one argument).
This is implemented using an extra argument to recvrequest().
Fixes a major security hole.
* clean up memory leak when using globulize()
* clean up a couple of comments
* fix wording in TNF copyright
features added:
* support for TIS fwtk gate-ftp servers:
* read defaults from $FTPSERVER && $FTPSERVERPORT
* start in gate-ftp mode if invoked as 'gate-ftp'
* toggle or set with 'gate [host [port]]'
* cleanup for WARNS=1 (including some ugly '(void)&var' bits wrapped in
#ifdef __GNUC__ to shut up gcc warnings WRT setjmp/longjmp)
* use strtol() instead of atoi(), and more extensively check result of
conversion
* use u_int16_t instead of short or int for TCP port addresses
* differentiate between being connected, and being logged in
* cleanup some text messages
* support username & password ftp URLs (ftp://user:pass@host/) in non-proxy
situations; assume proxy supports it for proxy situations.
* cd to / before performing any autofetch transfers
* use strncasecmp in URL parsing. fix from <Todd.Miller@courtesan.com>
* add "more" & "less" as synonyms for "page"
* move editline setup code into controlediting(), and call appropriately.
only setup setup terminal if going into interactive mode. inspired
by Todd Miller <todd.miller@courtesan.com>
* support remglobbing of auto_fetch arguments
* new flag - '-e'; disable editing
* "page file" == "get file |${PAGER-less}"
Bugfixes/cleanup:
* consistently use a trailing '.' on messages
* code cleanup, including buffer overrun fixes, use puts
and putchar in places, etc (inspired by OpenBSD mods)
* disable progress bar when local-file is a pipe or '-'
* skip \r in http headers
* fix remote ftpd slash bug more elegantly (so it works with ////)
* abort_remote(): check if cout==NULL before using it. should fix [bin/3273]
* fixed up cosmetic problems when complete_remote() generated errors from the
remote server (such as "no files found", "login with user and pass", ...)
done by adding extra argument to remglob(), which is a pointer to an error
buffer to put messages in rather than printing to stdout.
barring any more little things people want added ...]
New features:
* progressmeter is now asynchronous, so "stalled" transfers can be
detected. "- stalled -" is displayed instead of the ETA in this case.
When the xfer resumes, the time that the xfer was stalled for is
factored out of the ETA. It is debatable whether this is better than
not factoring it out, but I like it this way (I.e, if it stalls for 8
seconds and the ETA was 30 seconds, when it resumes the ETA will still
be 30 seconds).
* verbosity can be disabled on the command line (-V), so that in auto-fetch
mode the only lines displayed will be a description of the file, and
the progress bar (if possible)
* if the screen is resized (and detected via the SIGWINCH signal), the
progress bar will rescale automatically.
Bugs fixed:
* progress bar will not use the last character on the line, as this can
cause problems on some terminals
* screen dimensions (via ioctl(TIOCWINSZ)) should use stdout not stdin
* progressmeter() used some vars before initialising them
* ^D will quit now. [fixes bin/3162]
* use hstrerror() to generate error message for host name lookup failure.
* use getcwd instead of getwd (it should have been OK, but why tempt fate?)
* auto-fetch transfers will always return a positive exit value upon failure
or interruption, relative to the file's position in argv[].
* remote completion of / will work, without putting a leading "///".
This is actually a bug in ftpd(1), where "NLST /" prefixes all names
with "//", but fixing every ftpd(1) is not an option...
* Command line editing via editline(3) library.
* Context sensitive command and file completion, including remote files.
Enhancements to auto-fetch feature:
* Support for http:// URLs using the http protocol, including proxy HTTP
support via $htty_proxy if it's defined.
* The connection is kept open between successive files on the same host.
(obviously, this does not count for http requests.)
* Return value of ftp is 0 on no error, or the offset in argv[] of the file
which failed (i.e., argv[x] failed, ftp returns x).
* If the path in an ftp URL or classic format line has a trailing '/',
cd to the path and enter interactive mode. Fixes [bin/3011], albiet
requiring the user to help ftp in determining the operation.
Other changes:
* '-P port' works for normal ftp, and is the default for all classic style
auto-fetch transfers and for ftp URLs that don't specify the port.
(previously it would just work for the first xfer.)
* Some code moved into separated files along logical divisions.
* Editing and completion can be compiled out with -DSMALLFTP.
* in autofetch mode, don't retry a file if the connection failed - skip it
and move to the next file. [bin/3051, Matt Green]
* only print error messages from SIZE or MDTM if the user used 'size' or
'modt' (respectively). prevents extraneous warnings during normal transfers
when connected to a site which doesn't support these (behaviour prior to
last commit), but still allows error feedback to specific user requests
for this info (which the last commit broke).
* 'account': only accept one optional argument
* if invoked as pftp, default to passive mode on (from FreeBSD)
* remove leading '0 ' in progress bar - looked ugly
* use warn instead of perror
* use strncpy when src isn't known to have safe length
* remglob(): use mkstemp() to prevent symlink games, and don't override
_PATH_TMP, use it as the prefix to the temp file
lukem