divsi3.S, conditionally compiling the divide by zero case. This way,
after a change to the one, we can just copy it over to update the other
without creating ... problems. By Chris G. Demetriou.
Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)
Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).
feature to avoid rereads (which was added to work around bugs in
old SRM versions that wouldn't rewind DATs, but would return no
error on rewind callbacks)
* Initialize the volzero signature in ustarfs_open(), rather than as a
side effect of the first read.
* Centralize error retry.
in most situations, but not always: if the terminal path name component
being opened couldn't be found in the first fs block of the directory
that contained it, f_seekp would be non-zero (and Bad Things would result).
directories and use .PATH to lookup the source files.
(Formerly, the libs were built from the source dirs, with MAKEOBJDIR
set to the compilation directory.)
This solves 2 problems:
-"mkdep" and "make" are now consistent about the file lookup, this fixes
bad interactions with amd reported in PR bin/7374 (Arne Juul) and
lossage reported by Andrew Gillham ("obj" dirs and relative paths still
don't work well together)
-kernel compile trees can be moved around without forcing a new
"make depend" - fixing PR kern/4021 by Martin Husemann
* Add prototype to libkern.h.
* Remove the almost-identical-copy from libsa/net.[ch].
* Change its type back to the (wrong, but harmless) historical one. (u_long)
* Kill the XXX local prototype in nfs_bootparam.c
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
a small implementation of memcpy(). libsa memcpy() wouldn't
do the right thing if LIBSA_USE_MEMCPY was defined, and the whole
point of that define is to get rid of either bcopy() or memcpy().
(cloned from the bcopy() code.)
or LIBSA_USE_MEMCPY is defined. Most everything pulls in stand.h so
this should cover ports that only use memset/memcpy but still want to
pull in as much as possible from sys/lib/libsa.
not, depending on the port-specific environment.
Separate panic() and exit() so that the mi/default panic() can be used
without conflicting with a local exit() definition, move exit(void)
prototype to the default exit() implementation.
Closes PR bin/6990 by Wolfgang Helbig <helbig@Informatik.BA-Stuttgart.DE>.
minor of libc and the major of libutil). For little-endian architectures
merge the bnswap() assembly versions with nto* and hton* using symbols
aliasing. Use symbol renaming for the bswap function in this case to avoid
namespace pollution.
Declare bswap* in machine/bswap.h, not machine/endian.h. For little-endian
machines, common code for inline macros go in machine/byte_swap.h
Sync libkern with libc.
Adjust #include in kernel sources for machine/bswap.h.
increasing block numbers and don't reread cylinder 0.
2. Recognize the USTAR.... meta-info file...kind of like a super-block,
it makes the volume size and label info programmable.
addressing and disk changing code. Separate disk addressing into three layers.
(virtual: ustar format space spanning volumes, logical: format space relative
to current volume, and physical: standard meaning). Compute a checksum of the
disk 0 8k label area, and define a label for disk 2, 3.... Detect incorrect
disk changing order and attempt to recognize our disk 0 from its checksum.
Adds (most) support for ARC platform to port-independent mips code.
Some changes (e.g., clean up of overlapping CPU/FPU ids) inspired by
comparison to the OpenBSD 2.1 codebase of Soda's ARC port.
Open issues:
* Still no support for r4600 or mipsIV CPUs with two-way L1 cache.
Code derived from Per Fogelstrom's OpenBSD source doesn't work
on mips3 pmaxes with L2 cache.
* Still some port-specific #ifdefs, for interrupt enable and
pmax L2 cache-size. Needs more thought, but overlaps with
work-in-progress by Tohru and Tsubai on spl()s and related stuff.
if _STANDALONE or _KERNEL, don't include standard headers and pull
in libkern.h instead. (That doesn't even appear to be necessary,
but it's the 'standard' thing to do.)
