- Separation of relay policy (with smtpd_relay_restrictions) from spam policy
(with smtpd_{client, helo, sender, recipient}_restrictions), which makes
accidental open relay configuration less likely. The default is backwards
compatible.
- HAproxy load-balancer support for postscreen(8) and smtpd(8). The nginx
proxy was already supported by Postfix 2.9 smtpd(8), using XCLIENT commands.
- Support for the TLSv1 and TLSv2 protocols, as well as support to turn them
off if needed for inter-operability.
- Laptop-friendly configuration. By default, Postfix now uses UNIX-domain
sockets instead of FIFOs, and thus avoids MTIME file system updates on an
idle mail system.
- Revised postconf(1) command. The "-x" option expands $name in a parameter
value (both main.cf and master.cf); the "-o name=value" option overrides
a main.cf parameter setting; and postconf(1) now warns about a $name that
has no name=value setting.
- Sendmail-style "socketmap" lookup tables.
- Thanks to OpenSSL documentation, the Postfix 2.9.0..2.9.5 SMTP
client and server used an incorrect procedure to compute TLS
certificate PUBLIC-KEY fingerprints (these may be used in the
check_ccert_access and in smtp_tls_policy_maps features). Support
for certificate PUBLIC-KEY finger prints was introduced with Postfix
2.9; there is no known problem with the certificate fingerprint
algorithms available since Postfix 2.2.
Specify "tls_legacy_public_key_fingerprints = yes" temporarily,
pending a migration from configuration files with incorrect Postfix
2.9.0..2.9.5 certificate PUBLIC-KEY finger prints, to the correct
fingerprints used by Postfix 2.9.6 and later.
- Bugfix (introduced: Postfix 2.0): when myhostname is not listed in
mydestination, the trivial-rewrite resolver may log "do not list in both
mydestination and ". The fix is to re-resolve a domain-less address after
adding $myhostname as the surrogate domain, so that it pops out with the
right address-class label. Reported by Quanah Gibson-Mount.
- Bugfix (introduced: Postfix 2.3): don't reuse TCP connections when
smtp_tls_policy_maps is specified. TLS policies may depend on the remote
destination, but the Postfix <2.11 SMTP connection cache client does not
distinguish between different destinations that resolve to the same
IP address. Victor Duchovni. Found during Postfix 2.11 code maintenance.
- Bugfix (introduced: Postfix 2.2): don't reuse TCP connections when
SASL authentication is enabled. SASL passwords may depend on the
remote SMTP server hostname, but the Postfix <2.11 SMTP connection
cache client does not distinguish between different hostnames that
resolve to the same IP address. Found during Postfix 2.11 code
maintenance.
- Support for long, non-repeating, queue IDs (queue file names). The
main benefit of non-repeating names is simpler logfile analysis. See
the description of "enable_long_queue_ids" in postconf(5) for
details.
- Memcache client support, and support to share postscreen(8) and
verify(8) caches via the proxymap server. Details about memcache
support are in memcache_table(5) and MEMCACHE_README.
- Gradual degradation: if a database is unavailable (can't open, most
read or write errors) a Postfix daemon will log a warning and
continue providing the services that don't depend on that table,
instead of immediately terminating with a fatal error. To terminate
immediately when a database file can't be opened, specify
"daemon_table_open_error_is_fatal = yes".
- Revised postconf(1) command. It warns about unused parameter
name=value settings in main.cf or master.cf (likely mistakes),
understands "dynamic" parameter names such as names that depend on
the name of a master.cf entry (finally, "postconf -n" shows all
parameter settings), and it can display main.cf and master.cf in a
more user-friendly format (postconf -nf, postconf -Mf).
- Read/write deadline support in the SMTP client and server to defend
against application-level DOS attacks that very slowly write or read
data one byte at a time.
- The postscreen_access_list feature failed to ignore case in the first
character of a command (e.g., permit, reject, etc.). Reported by Francis
Picabia. (This fix is incorrectly listed in the HISTORY files of earlier
releases, and will be removed with a future patch.)
- Strip the datalink suffix (e.g., %eth0) from IPv6 addresses returned by
the system getaddrinfo() routine. Such suffixes break the default
mynetworks value, the Postfix SMTP server's reverse/forward DNS
name/address mapping check, and possibly more.
- To eliminate the possibility of collisions with connection cache lookup
keys, the Postfix LDAP client now computes those lookup keys by joining
the number-valued connection properties with ASCII null, just like it
already did with the string-valued connection properties.
- There was a memory leak during one-time TLS library initialization
(introduced with Postfix 2.5). Reported by Coverity.
- There was a memory leak in the unused oqmgr(8) program (introduced with
Postfix 2.3). Reported by Coverity.
- The local(8) delivery agent's BIFF client leaked an unprivileged UDP
socket. Fix by Jaroslav Skarvada. This bug was introduced 19990127.
- The SMTP server did not reject the AUTH command while a MAIL FROM
transaction was in progress. Reported by Timo Sirainen.
This bug was introduced 20000314.
- The unused "pass" trigger client could close the wrong file descriptors.
This bug was introduced with Postfix 2.8.
- The "change header" milter request could replace the wrong header. A long
header name could match a shorter one, because a length check was done on
the wrong string. Reported by Vladimir Vassiliev.
- Core dump when postlog emitted the "usage" message, caused by an extraneous
null assignment. Reported by Kant (fnord.hammer).
- These releases add support to turn off the TLSv1.1 and TLSv1.2 protocols.
Introduced with OpenSSL version 1.0.1, these protocols are known to cause
inter-operability problems, for example with some hotmail services.
The radical workaround is to temporarily turn off problematic protocols
globally:
/etc/postfix/main.cf:
smtp_tls_protocols = !SSLv2, !TLSv1.1, !TLSv1.2
smtp_tls_mandatory_protocols = !SSLv2, !TLSv1.1, !TLSv1.2
smtpd_tls_protocols = !SSLv2, !TLSv1.1, !TLSv1.2
smtpd_tls_mandatory_protocols = !SSLv2, !TLSv1.1, !TLSv1.2
However, it may be better to temporarily turn off problematic protocols for
broken sites only:
/etc/postfix/main.cf:
smtp_tls_policy_maps = hash:/etc/postfix/tls_policy
/etc/postfix/tls_policy:
example.com may protocols=!SSLv2:!TLSv1.1:!TLSv1.2
Notes:
Note the use of ":" instead of comma or space. Also, note that there is NO
space around the "=" in "protocols=".
The smtp_tls_policy_maps lookup key must match the "next-hop" destination
that is given to the Postfix SMTP client. If you override the next-hop
destination with transport_maps, relayhost, sender_dependent_relayhost_maps,
or otherwise, you need to specify the same destination for the
smtp_tls_policy_maps lookup key.
- OpenSSL related (all supported Postfix versions).
Some people have reported program crashes when the OpenSSL library was
updated while Postfix was accessing the Postfix TLS session cache. To avoid
this, the Postfix TLS session cache ID now includes the OpenSSL library
version number. This cache ID is not shared via the network.
- The OpenSSL workaround introduced with the previous stable and legacy
releases did not compile with older gcc compilers. These compilers can't
handle #ifdef inside a macro invocation (NOT: definition).
- To avoid repeated warnings from postscreen(8) with "connect to
private/dnsblog service: Connection refused" on FreeBSD, the dnsblog(8)
daemon now uses the single_server program driver instead of the multi_server
driver. This one-line code change has no performance impact for other
systems, and eliminates a high-frequency accept() race on a shared socket
that appears to cause trouble on FreeBSD. The same single_server program
driver has proven itself for many years in smtpd(8). Problem reported by
Sahil Tandon.
- Laptop-friendly support (all supported Postfix versions). A little-known
secret is that Postfix has always had support to avoid unnecessary disk
spin-up for MTIME updates, by doing s/fifo/unix/ in master.cf (this is
currently not supported on Solaris systems). However, two minor fixes are
needed to make this bullet-proof.
- In laptop-friendly mode, the "postqueue -f" and "sendmail -q" commands did
not wait until their requests had reached the pickup and qmgr servers before
closing their UNIX-domain request sockets.
- In laptop-friendly mode, the unused postkick command waited for more than
a minute because the event_drain() function was comparing bitmasks
incorrectly on systems with kqueue(2), epoll(2) or /dev/poll support.
- The Postfix sqlite client, introduced with Postfix 2.8, had an
embarassing bug in its quoting routine. As the result of a
last-minute code cleanup before release, this routine returned the
unquoted text instead of the quoted text. The opportunities for
mis-use are limited: Postfix sqlite database files are usually owned
by root, and Postfix daemons usually run with non-root privileges so
they can't corrupt the database. This problem was reported by Rob
McGee (rob0).
- The Postfix 2.8.4 fix for local delivery agent database lookup
errors was incomplete. The fix correctly added new code to detect
database lookup errors with mailbox_transport_maps,
mailbox_command_maps or fallback_transport_maps, but it failed to
log the problem, and to produce a defer logfile record which is
needed for "delayed mail" and "mail too old" delivery status
notifications.
- The trace(8) service, used for DSN SUCCESS notifications, did not
distinguish between notifications for a non-bounce or a bounce
message, causing it to "reply" to mail with the null sender
address. Problem reported by Sabahattin Gucukoglu.
- Support for Dovecot auth over TCP sockets, using code that already
existed for testing purposes. Patrick Koetter kindly provided an
update for the SASL_README file.
- Workaround in the LDAP client for changes in the under-documented
OpenLDAP API, by Victor Duchovni.
again. This was changed in sys/socket.h r1.51 to work around fallout
from the IPv6 aux data migration. It broke the historic ABI on some
platforms. This commit restores compatibility for netbsd32 code on such
platforms and provides a template for future changes to the CMSG_*
alignment. Revert PCC/Clang workarounds in postfix and tmux.
built without TLS support, at least not without major surgery.
I've only tested this by building with "MKCRYPTO" set to "yes"
because the build fails much ealier otherwise.
Problem reported by Nick Hudson in private e-mail.
Postfix stable release 2.8.7 is available. This contains a workaround for
a problem that is fixed in Postfix 2.9.
- The postscreen daemon, which is not enabled by default, sent non-compliant
SMTP responses (220- followed by 421) when it could not give a connection
to a real smtpd process. These responses caused some remote SMTP clients
to return mail as undeliverable.
The workaround is to hang up after sending 220- without sending the
421 "sorry" reply; this is harmless.
- The Postfix SMTP daemon sent "bare" newline characters instead of
<CR><LF> when a header_checks REJECT pattern matched multi-line
header. This bug was introduced with Postfix 1.1.
- The Postfix SMTP daemon sent "bare" newline characters instead of
<CR><LF> when an smtpd_proxy_filter returned a multi-line
response. This bug was introduced with Postfix 2.1.
- For compatibility with future EAI (email address
internationalization) implementations, the Postfix MIME processor no
longer enforces the strict_mime_encoding_domain check on unknown
message subtypes such as message/global*. This check is disabled by
default.
- The Postfix master daemon could report a panic error ("master_spawn:
at process limit") after the process limit for some service was
reduced with "postfix reload". This bug existed in all Postfix
versions.
- The Postfix Milter client logged a "milter miltername: malformed reply"
error when a Milter sent an SMTP response without enhanced status code
(i.e. "XXX Text" instead of "XXX X.X.X Text").
- The Postfix Milter client sent a random {client_connections} macro value
when the remote SMTP client was not subject to any smtpd_client_* limit.
As a workaround, it now sends a zero value instead.
- Performance: a high load of DSN success notification requests could
slow down the queue manager. Solution: make the trace client
asynchronous, just like the bounce and defer clients.
- The local(8) delivery agent ignored table lookup errors in
mailbox_command_maps, mailbox_transport_maps, fallback_transport_maps
and (while bouncing mail to alias) alias owner lookup.
- Workaround: dbl.spamhaus.org rejects lookups with "No IP queries" even
if the name has an alphanumerical prefix. We play safe, and skip both
RHSBL and RHSWL queries for names ending in a numerical suffix.
- The "sendmail -t" command reported "protocol error" instead of "file
too large", "no space left on device" etc.
- The Postfix Milter client reported a temporary error instead of
"file too large" in three cases.
Push -Wno-array-bounds down to the cases that depend on it.
Selectively disable warnings for 3rd party software or non-trivial
issues to be reviewed later to get clang -Werror to build most of the
tree.
Postfix releases 2.8.3, 2.7.4, 2.6.10 and 2.5.13 are available. These contain
a fix for CVE-2011-1720 which affects Postfix SMTP server configurations that
use Cyrus SASL authentication. Besides full releases, patches are available
for Postfix 1.1 and later.
This defect was introduced with the Postfix SASL patch, and is present in all
Postfix versions where the command "postconf mail_release_date" reports a
value of 20000314 (March 14, 2000) or greater.
Note: CVE-2011-1720 does not affect Postfix SMTP servers that use Dovecot
SASL authentication. It also does not affect the common Postfix SMTP server
configurations that use only Cyrus SASL mechanisms PLAIN and LOGIN.
More details will be available at http://www.postfix.org/CVE-2011-1720.html.
- Bugfix: postscreen DNSBL scoring error. When a client disconnected
and then reconnected before all DNSBL results for the earlier
session arrived, DNSBL results for the earlier session would be
added to the score for the later session. This is very unlikely
to have affected any legitimate mail.
- Workaround: the SMTP client did not support mail to [ipv6:ipv6addr].
Postfix stable release 2.8.0 is available. This release continues the
move towards improving code and documentation, and making the system
better prepared for changes in the threat environment.
The postscreen daemon (a zombie blocker in front of Postfix) is now
included with the stable release. postscreen now supports TLS and can
log the rejected sender, recipient and helo information. See the
POSTSCREEN_README file for recommended usage scenarios.
Support for DNS whitelisting (permit_rhswl_client), and for pattern
matching to filter the responses from DNS white/blacklist servers
(e.g., reject_rhsbl_client zen.spamhaus.org=127.0.0.[1..10]).
Improved message tracking across SMTP-based content filters; the
after-filter SMTP server can log the before-filter queue ID (the
XCLIENT protocol was extended).
Read-only support for sqlite databases. See sqlite_table(5) and
SQLITE_README.
Support for 'footers' that are appended to SMTP server "reject"
responses. See "smtpd_reject_footer" in the postconf(5) manpage.
1) libsaslc is an SASL client only.
2) dovecot is an SASL server only.
3) cyrus-sasl is both a client and a server.
4) postfix allows us to have multiple SASL servers and clients.
5) The SASL server to use at runtime is determined by the setting of
"smtpd_sasl_type" in main.cf (note that is smtpd_ not smtp_). If
that is not set, then it defaults to the value of
DEF_SERVER_SASL_TYPE at build time, which if not set, defaults to
"cyrus". See postfix/dist/src/global/mail_params.h.
6) The SASL client to use at runtime is determined by the setting of
"smtp_sasl_type" in main.cf. If that is not set, then it defaults
to the value of DEF_CLIENT_SASL_TYPE at build time, which if not
set, defaults to "cyrus". See postfix/dist/src/global/mail_params.h.
7) If MKCRYPTO is "no", libsaslc will not link as it requires the
crypto libraries, so libsaslc cannot be enabled (as it was before)
without crypto.
8) I have made the definition of DEF_CLIENT_SASL_TYPE conditional on
MKCRYPTO due to (7). Without crypto it will default to cyrus.
9) HAVE_CYRUS_SASL is _never_ defined during a normal build and _never_
should be! It is there for the convenience of users who wish to
install cyrus-sasl and rebuild postfix with it. It is also very
useful for testing if it is suspected that something might be wrong
with libsaslc. PLEASE DO NOT REMOVE IT!
tron