normal operation (/var can get filled up by flodding bogus packets).
sysctl net.inet6.icmp6.nd6_debug will turn on diagnostic messages.
(#define ND6_DEBUG will turn it on by default)
improve stats in ND6 code.
lots of synchronziation with kame (including comments and cometic ones).
- let ipfilter look at wire-format packet only (not the decapsulated ones),
so that VPN setting can work with NAT/ipfilter settings.
sync with kame.
TODO: use header history for stricter inbound validation
mandatory for IPv6 (so we can't just validate by using connected pcb - we need
to allow traffic from unconnected pcb to do pmtud).
- if the traffic is validated by xx_ctlinput, allow up to "hiwat" pmtud
route entries.
- if the traffic was not validated by xx_ctlinput, allow up to "lowat" pmtud
route entries (there's upper limit, so bad guys cannot blow up our routing
table).
sync with kame
XXX need to think again about default hiwat/lowat value.
XXX victim selection to help starvation case
TODO: udp6, and sendto consideration. as pmtud is mandatory for IPv6,
it is rather important for us to support those cases.
TODO: more testing
TODO: kame sync
> in the check for the incoming redirect message, examine the gateway
> (from the routing table) only when the address family of the gateway is
> AF_INET6.
- add protection mechanism against ND cache corruption due to bad NUD hints.
- more stats
- icmp6 pps limitation. TOOD: should implement ppsratecheck(9).
between protocol handlers.
ipsec socket pointers, ipsec decryption/auth information, tunnel
decapsulation information are in my mind - there can be several other usage.
at this moment, we use this for ipsec socket pointer passing. this will
avoid reuse of m->m_pkthdr.rcvif in ipsec code.
due to the change, MHLEN will be decreased by sizeof(void *) - for example,
for i386, MHLEN was 100 bytes, but is now 96 bytes.
we may want to increase MSIZE from 128 to 256 for some of our architectures.
take caution if you use it for keeping some data item for long period
of time - use extra caution on M_PREPEND() or m_adj(), as they may result
in loss of m->m_pkthdr.aux pointer (and mbuf leak).
this will bump kernel version.
(as discussed in tech-net, tested in kame tree)
draft-ietf-ipngwg-icmp-name-lookups-04.txt.
There are certain bitfield change in 04 draft to 05 draft, which makes
04 "ping6 -a" and 05 "ping6 -a" not interoperable. sigh.
- remove net.inet6.ip6.nd6_proxyall. introduce proxy NDP code works
just like "arp -s".
- revise source address selection.
be more careful about use of yet-to-be-valid addresses as source.
- as router, transmit ICMP6_DST_UNREACH_BEYONDSCOPE against out-of-scope
packet forwarding attempt.
- path MTU discovery takes care of routing header properly.
- be more strict about mbuf chain parsing.
pfil information, instead, struct protosw now contains a structure
which caontains list heads, etc. The per-protosw pfil struct is passed
to pfil_hook_get(), along with an in/out flag to get the head of the
relevant filter list. This has been done for only IPv4 and IPv6, at
present, with these patches only enabling filtering for IPPROTO_IP and
IPPROTO_IPV6, although it is possible to have tcp/udp, etc, dedicated
filters now also. The ipfilter code has been updated to only filter
IPv4 packets - next major release of ipfilter is required for ipv6.
code, from netbsd-current repository.
#ifdef'ed version is always available from ftp.kame.net.
XXX please do not make too many diff-unfriendly changes, we'll need to take
bunch of diffs on upgrade...
this allows you to disable/enable ICMPv6 node information query/reply
processing (which tells remote end the gethostname(3) setting, interface
addresses on the node, and some other things - documented in
draft-ietf-ipngwg-icmp-name-lookup* or something alike).
to test it, try ping6 -w ::1 with nodeinfo=0 and nodeinfo=1.
(sync with kame change)
due to massive changes in KAME side.
- IPv6 output goes through nd6_output
- faith can capture IPv4 packets as well - you can run IPv4-to-IPv6 translator
using heavily modified DNS servers
- per-interface statistics (required for IPv6 MIB)
- interface autoconfig is revisited
- udp input handling has a big change for mapped address support.
- introduce in4_cksum() for non-overwriting checksumming
- introduce m_pulldown()
- neighbor discovery cleanups/improvements
- netinet/in.h strictly conforms to RFC2553 (no extra defs visible to userland)
- IFA_STATS is fixed a bit (not tested)
- and more more more.
TODO:
- cleanup os-independency #ifdef
- avoid rcvif dual use (for IPsec) to help ifdetach
(sorry for jumbo commit, I can't separate this any more...)
itojun