8e58476bbd
correct 2 typos
2003-12-18 15:52:31 +00:00
08f1ceee65
PR/23786: Robert Nestor: wait command returns the wrong status code. This
...
seems to be an off-by-one error, since njobs is decremented before we use
it. I hope this does not break the vfork case!
2003-12-18 00:56:05 +00:00
9a77f16705
Handle breaksw inside while loop (from tcsh)
...
Really: test commits on new cvs binary.
2003-12-17 17:32:16 +00:00
550c4966cd
Correct typo in page header for tpgid.
2003-12-16 14:26:46 +00:00
375e81b270
Some file systems, like FAT, have no inodes in the ffs sense and don't
...
run out of inodes. df -i was saying, however, that such file systems
had 100% of their inodes in use, which would do things like trigger
alarms in scripts looking for file systems that have run out.
Instead, say 0% are in use, which although not strictly true is at
least less wrong, fixes scripts and is less worrying in nightly reports.
2003-12-07 22:42:36 +00:00
9d454b9e0a
mention that -h also overrides BLOCKSIZE, and sort around there
2003-12-07 16:18:25 +00:00
6fc98bf82d
Add -C to usage.
2003-11-28 23:32:25 +00:00
7978aff203
Bump date for previous (hi niels!).
...
Sort options.
2003-11-28 23:32:02 +00:00
61d0495091
support for cradle mode by marius at monkey.org; cradle mode allows the
...
systrace UI to be attached and re-attached, it also multiplexes across
systrace process so that one UI can function as central notification
2003-11-28 21:53:32 +00:00
7983f217c9
Generate command line when SMALL is defined and make buffer full sized.
...
All the code has been present for a while, and the memory cost is (about)
180 bytes per process.
Fixes PR bin/23545
2003-11-27 21:16:14 +00:00
493b309b03
Put a few headers back so this compiles again.
...
Compile problems noticed by Dan Carosone.
2003-11-25 03:40:18 +00:00
2d72f72583
Don't emit any warnings when tar is trying to figure out if the file is
...
really tar format. valid CPIO files should not trigger a warning from tar.c
2003-11-24 23:48:47 +00:00
2c872ddbbc
Also remove headers that are no longer needed. Also pointed out by Mike
...
Small.
2003-11-24 22:47:02 +00:00
d772e9e433
Remove unused variable stdout_ok, which was left over from my changes
...
in September. Pointed out by Mike Small in a private email.
2003-11-24 22:38:46 +00:00
2244ab26a9
allow underscores in usernames
2003-11-18 05:28:05 +00:00
e606e2dcb2
Improve how various "simple" host tools are built and invoked.
2003-11-16 14:14:18 +00:00
39973c5237
Optimise previous change, using fcntl(F_DUPFD) to locate a free descriptor
...
for us, rather than iterating until satisfied.
Suggested by David Laight.
2003-11-15 14:55:32 +00:00
0b16f71074
Avoid corrupting the dd(1) IO streams. This would happen by accidentally
...
outputting to the files being manipulated by opening a file in the standard IO
descriptor space. In particular, an output file unlucky enough to be sitting
on descriptor 2 (stderr) is certain to be corrupted.
Addresses PR bin/8521, and passes the recently committed regression test
"bin/dd".
2003-11-15 12:44:54 +00:00
296844fe72
Posix requires that 'pwd -P' reset the shells saved cwd value - so a
...
subsequent 'pwd -L' will report the same value.
Update man page to be a closer match to reality.
2003-11-14 20:00:28 +00:00
c0cf1d6b30
This seems to need stdlib.h to get a prototype for abort().
2003-11-14 10:46:13 +00:00
edecd89511
Add '\n' to "fork failed" trace messages.
2003-11-14 10:27:10 +00:00
61ea2c0760
file system, not filesystem; e.g. is an abbreviation; use FAT instead of msdos
...
when describing the file system.
2003-10-30 14:58:23 +00:00
db9b05af0d
Make /bin/pwd almost conform to IEEE 1003.1
...
- Make 'pwd -L' fall back to 'pwd -P' if PWD is incorrect.
- Ignore PWD if it contains "/./" or "/../".
- Garbage collect some redundant code.
It is still non-conformant because posix mandates that the default
be 'pwd -L' (aka ksh), not 'pwd -P' (historic practise everywhere else).
Changing the default will break too much...
2003-10-30 13:52:23 +00:00
df5bd11fb9
Validate the arguments to 'pwd'. Treat -L and -P as per pwd(1).
...
Note that 'pwd -L' and 'pwd -P' almost always report the same answer as
the shell detects when 'cd' follows a symlink and discards its cached 'pwd'
2003-10-30 09:40:26 +00:00
6a22b79c1a
passwd(5), not passwd(4). From Igor Sobrado in PR 23278.
2003-10-27 08:23:40 +00:00
4580c6ac21
Do not xref alias(1) since that points to csh(1).
...
Noted by Igor Sobrado in PR 23278, fixed following a suggestion by Greg A. Woods.
2003-10-27 08:22:21 +00:00
7568eb663a
skip a leading `-' on the arg0 name when calling el_init()
2003-10-27 06:19:29 +00:00
171d653219
Overhaul how `build.sh tools' are used:
...
* Rename "config.h" to "nbtool_config.h" and
HAVE_CONFIG_H to HAVE_NBTOOL_CONFIG_H.
This makes in more obvious in the source when we're using
tools/compat/config.h versus "standard autoconf" config.h
* Consistently move the inclusion of nbtool_config.h to before
<sys/cdefs.h> so that the former can provide __RCSID() (et al),
and there's no need to protect those macros any more.
These changes should make it easier to "tool-ify" a program by adding:
#if HAVE_NBTOOL_CONFIG_H
#include "nbtool_config.h"
#endif
to the top of the source files (for the general case).
2003-10-27 00:12:41 +00:00
5037f26eb0
don't need -DHAVE_CONFIG_H here
2003-10-26 09:30:55 +00:00
f85d2d1c14
Use ${HOST_SH} instead of `sh'.
...
If necessary, pull in <bsd.sys.mk> to get the definition of HOST_SH;
Makefiles that pull in one of (most of) <bsd.*.mk> will get this anyway.
2003-10-26 07:25:33 +00:00
857ab1bdd0
use ${HOST_SH} instead of /bin/sh
2003-10-26 03:50:07 +00:00
130ab7336b
Rework how MAKEVERBOSE operates:
...
* Don't bother prefixing commands with a line of ${_MKCMD}\
and instead rely upon "make -s". This is less intrusive on
all the Makefiles than the former. Idea from David Laight.
* Rename the variables use to print messages. The scheme now is:
_MKMSG_FOO Run _MKMSG 'foo'
_MKTARGET_FOO Run _MKMSG_FOO ${.TARGET}
From discussion with Alistair Crooks.
2003-10-21 10:01:19 +00:00
84f47d78af
Don't initialize an integer field with NULL.
2003-10-21 02:11:21 +00:00
cf96462927
Don't pass an integer as NULL.
2003-10-21 02:08:14 +00:00
1bbc81a501
Let libedit handle signals so we resize properly. I might change my mind
...
later on that.
2003-10-19 19:13:21 +00:00
ddff99b7f4
rework to use the newer _MKMSGCREATE (et al) macros
2003-10-19 04:45:01 +00:00
1e840c4d40
Ensure that $TERM is set in the real environment before calling el_init(3)
...
when executing "set -o (emacs|vi)". Fixes [bin/23175] from me.
2003-10-19 01:55:05 +00:00
bbbbcbe44f
Fix typos in comments. From Jared Yanovich via jmc@openbsd.
2003-10-19 01:52:45 +00:00
a9d371700c
improve MAKEVERBOSE message for HOST_LINKed tools
2003-10-19 00:43:02 +00:00
29e7d09b65
Support MAKEVERBOSE (XXX: mksyntax is noisy when MAKEVERBOSE=0).
...
Use DPSRCS appropriately.
2003-10-19 00:35:26 +00:00
046b9ab451
support MAKEVERBOSE
2003-10-19 00:14:16 +00:00
51b9502fb1
Link the host tools against tools/compat -lnbcompat since someone decided to
...
use strlcpy() and snprintf() in the host tools...
Should fix part of [toolchain/22504], and build problems on other
platforms that don't have strlcpy() or snprintf()...
2003-10-18 07:58:35 +00:00
6c7baec4af
Add Xr for dev_mkdb(8), per PR 23168. Increase width in FILES section while here.
2003-10-16 10:00:54 +00:00
b2b49933f4
Move Matt Green's code from a 4-clause to a 3-clause licence by removing
...
the advertising clause. Diffs provided in PR 22396 by Joel Baker, the changes
were confirmed to the board by Matt Green.
2003-10-13 14:22:20 +00:00
ed6ed8e698
Move Keith Muller's code from a 4-clause to a 3-clause licence by removing
...
the advertising clause. Diffs provided in PR 22397 by Joel Baker, confirmed
to the board by Keith Muller.
2003-10-13 07:41:22 +00:00
13fd6f5a25
Fix rmdir -p x/y/z//
...
Remove redundant code.
2003-09-29 21:11:15 +00:00
b17e1b5c12
Fix 'set "*" b; case "* b" in "$@") ...' and 'set "*"; case 1 in "${#1}") ...'
...
Which got broken by the previous fix.
2003-09-22 12:17:24 +00:00
835710a2a0
Bump date for previous; comma cleanup.
2003-09-22 06:01:43 +00:00
21ab633500
After last weeks addition of the '-b' flag, add '-B' and '-w' flags,
...
suggested by uwe@, inspired by FreeBSD. The three flags override
each other (and the '-q' flag) and behave as follows:
-B Force printing of non-printable characters in file names as
\xxx, where xxx is the numeric value of the character in octal.
-b As -B, but use C escape codes whenever possible.
-w Force raw printing of non-printable characters. This is the
default when output is not to a terminal.
2003-09-22 02:43:19 +00:00
7e1f466773
realloc pedant
2003-09-19 08:46:32 +00:00
c747caaab9
make signal range check consistent.
2003-09-19 05:31:11 +00:00
0faf575771
wait for compression program to finish before exiting.
...
fix races condition resulting in a zero length archive after pax
exits.
patch from OpenBSD, provided by Joerg Sonnenberger in PR bin/22740.
2003-09-18 09:18:24 +00:00
4c79e7620f
Drop equal signs from rule definitions; they cause problems with "bison -y".
2003-09-17 17:33:36 +00:00
4dcb41ae2c
PR/22640: Paul Jarc: sh mishandles positional parameters in case. Fixed
...
from FreeBSD PR 56147.
2003-09-17 16:01:19 +00:00
fb2e1913c5
Bump date for previous.
2003-09-14 21:56:25 +00:00
6a75fbb636
Following private discussion with kleink@ and hubertf@ and public discussion
...
on tech-userlevel@, back out printescaped() functionality.
kleink: ``We sell rope.''
2003-09-14 19:20:16 +00:00
2ccef82cc4
Implement '-b' option, which, following FreeBSD, Linux and (I think) Solaris
...
prints octal escapes for nongraphic characters.
2003-09-14 19:16:05 +00:00
0ec085e737
Add 'trace' to CLEANFILES, generated when debug is enabled.
2003-09-14 12:11:10 +00:00
af90286087
Fix crash when DEBUG=2, by opening the log file ASAP. Reviewed by simonb@.
2003-09-14 12:09:29 +00:00
e84c1029c6
Comment out unneeded code now that the kernel has been fixed to ignore
...
trailing slashes.
2003-09-11 17:38:12 +00:00
e3d9d7109f
Add ':' to the list of characters to be escaped. Fixes completion problems
...
when the filename includes this character.
2003-09-11 10:24:57 +00:00
29119d0e3b
Reinstate paragraph about -E, sort option descriptions, and bump date for -E addition.
2003-09-08 13:13:08 +00:00
7554e5998d
Some more fixes: sort sections, escape some stuff for HTML output.
2003-09-08 13:02:59 +00:00
25eb7d566d
Improved version of OpenBSD's mdoc'ed version of ed(1) (v1.42).
2003-09-08 12:58:41 +00:00
a3390acd07
Punctuation improvement from jmc@openbsd.
2003-09-07 15:58:58 +00:00
6c3a1a5dfb
Some small tweaks from jmc@openbsd:
...
- .Bk/.Ek for SYNOPSIS
- .Ev for environment variables
- fix bogus -offsets
2003-09-06 16:39:34 +00:00
3efe781f15
plug memory leak. PR bin/22694
2003-09-05 20:16:50 +00:00
4157dbb127
Sort options (AaBb...).
2003-09-02 08:36:20 +00:00
5526319b35
In emacs mode, when expanding file names containing characters that should
...
get quoted with <ESC>*, _do_ quote them.
Patch from Federico Schwindt fgsch@openbsd -- thanks!
[rev 1.25 in OpenBSD version of this file]
2003-08-28 19:53:32 +00:00
9fdd63d776
From FreeBSD bug report 54294, via Jonathan Gray and then jmc@openbsd:
...
-l option to ls(1) gives all permissions, not just owner and group.
2003-08-28 19:44:09 +00:00
9267b09572
Include "config.h" if building as a host program.
...
Need this to get SIZE_MAX defintion from compat_defs.h on FreeBSD.
2003-08-27 18:36:19 +00:00
523866566b
Add missing "."
2003-08-27 16:27:35 +00:00
aba1ca99ae
Include strings.h, needed for index's prototype.
2003-08-26 18:14:24 +00:00
6d82007582
Use '\0' instead of NULL in two checks (we are not checking for a pointer
...
value). While here, add a missing whitespace.
2003-08-26 18:13:25 +00:00
5199a59afa
s/FD_SETFD/F_SETFD/
2003-08-26 18:12:33 +00:00
a420e618d0
Push (into yank buffer) words only if force_push is TRUE;
...
set force_push to TRUE in x_del_bword and x_del_fword.
Fixes behaviour where <meta-y> would put the previously yanked word in the yank buffer another time.
2003-08-26 09:06:50 +00:00
bd6ed3b8c1
From OpenBSD:
...
revision 1.21
date: 2003/08/02 19:26:15; author: fgsch; state: Exp; lines: +4 -2
On ESC-y ESC-y (yank-pop), also check that there is something to
insert (some text has been killed before). from otto@, fix bug report 3384.
On yank-pop error (no yank before), reset the index to killstack so
another yank-pop does not mangle the prompt if nothing was yanked, and
to avoid replacing a text when it shouldn't
(yank <something> yank-pop yank-pop).
otto@ ok.
2003-08-26 08:52:03 +00:00
a7f5601ea5
Allow single letters to be yanked, not only words of two or more letters.
2003-08-26 08:40:51 +00:00
77f8e9c131
Add 'return' statement (and whitespace) to sync with OpenBSD version
...
of the patch committed in v1.12.
2003-08-26 07:35:21 +00:00
ad30231fc4
From OpenBSD:
...
revision 1.18
date: 2003/08/22 18:17:10; author: fgsch; state: Exp; lines: +2 -2
in word location, fix forward scanning so it correctly account for any
escaped char and not only spaces.
for "foo (bar.a)" and "foo (bar a)", cd foo\ \(bar.<tab> will correctly
expand to foo\ \(bar.a\).
otto@ and pval@ ok.
2003-08-26 07:28:39 +00:00
80d20cd1d2
From OpenBSD:
...
revision 1.23
date: 2003/08/23 02:30:59; author: fgsch; state: Exp; lines: +2 -2
under emacs mode, fix the case when the globbed file and the longest
prefix lenghts are equal ("a .b" and "a ab" by instance).
found and tested by otto@.
2003-08-26 07:27:42 +00:00
534b18e585
Move an assignment that was using a variable out of scope to fix a build
...
problem on !NetBSD.
2003-08-25 20:08:12 +00:00
aeaabe9fa8
This is a host tool, so for the time being change SIZE_T_MAX to the
...
more portable SIZE_MAX; partially addresses PR toolchain/22504 from
Christian Limpach.
2003-08-25 16:38:55 +00:00
ffdf32a762
From OpenBSD:
...
date: 2000/11/21 22:41:03; author: millert; state: Exp; lines: +2 -1
Add missing break that broke 'kill -s SIGNAME', bug report #1495
Fix from Hiroyuki.HORINOKUCHI@nrj.ericsson.se
2003-08-25 13:23:59 +00:00
5f734a1850
fix a race condition between path resolution in userland
...
and the subsequent namei(): inform the kernel portion of
valid filenames and then disallow symlink lookups for
those filenames by means of a hook in namei().
with suggestions from provos@
also, add (currently unused) seqnr field to struct
systrace_replace, from provos@
2003-08-25 09:12:42 +00:00
59a105b48a
remove \r (agc, are you using MS-DOS?)
2003-08-22 14:21:12 +00:00
3538d2653b
Move 4 more files from UCB 4 clause to 3 clause licence.
...
Thanks to Julio Merino for pointing them out.
2003-08-22 11:22:23 +00:00
e9a8269bb0
remove clause 3
2003-08-21 17:57:53 +00:00
ca5d0a41d2
Fix two more memory leaks found by Hubert Feyrer.
2003-08-21 04:30:25 +00:00
39ff49f1b4
Fix memory leak noted by Hubert Feyrer in private email.
...
Patch by Hubert Feyrer as well, OK by kleink.
(I'm just fixing it b/c it's my fault to begin with.)
2003-08-20 14:25:54 +00:00
5d98794ef5
Minor KNF nit from rev. 1.13.
2003-08-20 10:43:55 +00:00
e0e82d2080
typo
2003-08-20 01:28:44 +00:00
ce5d37eae2
use bounded string op
2003-08-13 07:34:09 +00:00
e1e0321817
use bounded string op
2003-08-13 02:51:20 +00:00
b5b2954259
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22249, verified by myself.
2003-08-07 09:05:01 +00:00
e5f16a4651
Include stdlib.h so EXIT_FAILURE is defined.
2003-08-05 14:55:03 +00:00
458ed23412
As discusses a little while back on tech-userlevel:
...
If stdout is a tty, use vis(3) to print any filenames to prevent garbage
from being printed if the filename contains control- or other non-printable
characters.
While here, sprinkle some EXIT_FAILURE and NOTREACHED where appropriate.
2003-08-04 22:31:21 +00:00
ab6fc8a1fd
fixed contrived race condition during attachment; from marius@monkey.org
2003-08-02 14:45:08 +00:00
037feaaf20
avoid warning due to name collision.
2003-08-02 14:34:35 +00:00
2e1af85ab0
normalize CWD for cases where CWD has a symlink in it. should solve
...
problems where CWD policies would not match.
2003-08-02 14:31:10 +00:00
heas