Commit Graph

81663 Commits

Author SHA1 Message Date
tsubai 66c1ffd9be Remove cpu_dumpconf(); it's in powerpc_machdep. 2001-06-12 17:23:13 +00:00
tsubai 713feac239 Include powerpc/mpc6xx/{bat.h,pte.h} if PPC_MPC6XX is defined. 2001-06-12 17:20:50 +00:00
tsubai bee211fc53 Move "file .../bus_dma.c" line to MD place.
Add options PPC_MPC6XX on missed ports.
XXX I think PPC_OEA is better name.
2001-06-12 17:13:34 +00:00
matt fa3621e3be Move netwinder_machdep.c to files.netwinder. Eliminate opt_netwinder.h and
use #ifdef netwinder insead.  XXX ebsa285_machdep.c should move to the cats
directory and files.cats
2001-06-12 17:10:25 +00:00
minoura f8ce82f817 Another steps for ELF.
- register prefix
 - machine/asm.h
 - deprecated -T option for ld(1)
2001-06-12 16:57:27 +00:00
tsubai cbad4436c2 One more. 2001-06-12 16:32:00 +00:00
tsubai 51a013241c Make this compile w/o akbd or ukbd. 2001-06-12 16:29:07 +00:00
wiz 0a600be867 receive, not recieve 2001-06-12 15:17:10 +00:00
itojun bdbfdf946d run pfil_hooks for IPv6 forwarding path (note: ip6_forward() does not
call ip6_output()).
2001-06-12 15:12:33 +00:00
thorpej 4f7cad1c02 On a non-simplex interface, check incoming multicast (this catches
the broadcast case as well) to see if they came from us, and drop
them if they did.

This fixed IPv6 DAD on non-simplex interfaces, e.g. the Seeq 8003
found on my SGI Indy.
2001-06-12 15:03:26 +00:00
wiz 2a8c778f1b retrieve, not retreive 2001-06-12 14:59:27 +00:00
wiz 33e277929f Typos/whitespace. 2001-06-12 14:54:19 +00:00
wiz 29a0f47f4f Typos/whitespace. 2001-06-12 14:41:40 +00:00
ragge 3bd0afbc54 Make tracing of stack by frame argument work. 2001-06-12 13:22:06 +00:00
ragge 5335780e31 Support to get into DDB from hardclock interrupts by putting a value in
the RPB wait field.
2001-06-12 13:20:29 +00:00
ragge 8f96f4b21c Fix problem where console interrupts never got enabled after RB_ASKNAME. 2001-06-12 13:18:38 +00:00
wiz a0b4d95fd0 Typos/whitespace. 2001-06-12 12:04:22 +00:00
wiz f34929a45f Typos/whitespace/punctuation. 2001-06-12 12:00:19 +00:00
bjh21 cb6b68a931 Mention where I got the information for writing the driver. 2001-06-12 11:52:03 +00:00
bjh21 f6f3c9b35f Add a hefty comment about the stray IR bug, so I don't forget it. 2001-06-12 11:49:18 +00:00
wiz b50f28c38a underrun, not underun 2001-06-12 11:48:51 +00:00
wiz b8ce84dc0b Typos/whitespace fixes. 2001-06-12 11:39:02 +00:00
wiz bcc9b7d985 Typos/whitespace. 2001-06-12 11:35:03 +00:00
minoura 55e73f8bc1 I was too careless. Do not throw away the prepared string. :p 2001-06-12 11:29:31 +00:00
wiz 75dbb967a7 Typos/whitespace fixes. 2001-06-12 11:26:21 +00:00
ragge 8f68bebb7e Detect 4000/VLC correctly + make halt/reboot work.
From Michael L. Hitch (mhitch@montana.edu).
2001-06-12 11:24:50 +00:00
minoura 5d6ce3b75c Make this compile again. 2001-06-12 10:30:04 +00:00
minoura b1b468a365 Remove unneeded whitespace. 2001-06-12 10:03:04 +00:00
chris be97fea093 Remove Makefile.cats. We now use the arch/arm/conf/Makefile.arm. 2001-06-12 08:33:48 +00:00
chris eb541612a0 Add cats specific makefile for tags and includes. 2001-06-12 08:32:46 +00:00
chris f90999bd42 Cats doesn't need io.h any more as it has it's own conf.c files. 2001-06-12 08:31:53 +00:00
chris a7b8789da8 Add cats specific autoconf and conf.c. Also add defopt NETWINDER to files.cats, this is so a few things that include opt_netwinder compile. 2001-06-12 08:30:47 +00:00
chris 8c53bc98ee comment out MEMORY_DISK_HOOKS, currently cats can only use an in-kernel memory disk. 2001-06-12 08:27:08 +00:00
thorpej 42a2e688fe If the parent interface can do hardware-assisted VLAN encapsulation,
then propagate its hardware-assisted checksumming flags.
2001-06-12 06:16:59 +00:00
simonb 0bdd2faeed Get the opcode mask right for almost all the Op_OE opcodes (only two were
correct).
2001-06-12 05:31:44 +00:00
chs dcb3005097 Use x_mount and x_umount. 2001-06-12 03:26:08 +00:00
uwe 1f4eee4c21 In wsfont_map_unichar: when checking that 'lo' is within 'map2' range,
compare 'lo', not 'hi' (only partially edited cut-n-paste it seems).
2001-06-12 00:57:10 +00:00
thorpej ba52d7a5d0 Always indirect through the "locoresw" to get the cache ops, since
there are just far too many combinations to handle with magic
#ifdefs in any sane way.  Also, add a HitFlushDCache op to the
"locoresw", and fill it in as appropriate (it's NULL on MIPS-I,
so watch out).

These changes ensure that my R4600 Indy (with 2-way cache) gets
the correct cache ops when the kernel is built with only MIPS3
support, resulting in a kernel that is significantly more stable.
2001-06-11 23:52:38 +00:00
perry df452bb9b8 clean up some comments, per a request from sommerfeld 2001-06-11 22:56:26 +00:00
chris 1825c7b68a Move defopt FOOTBRIDGE to where it really should be in files.footbridge, which is where I should have left it. 2001-06-11 22:25:09 +00:00
chris ed72dec945 Remove locore dependancy on opt_netwinder and use the netwinder define from the command line. 2001-06-11 22:08:42 +00:00
fredette 8d1b187a4c Fixed pte_print to display the correct names
for VME device pages.
2001-06-11 21:35:59 +00:00
fredette 6e5f704918 Now use hand-defined macros instead of relying
on structure layout to find registers.  Added
a VME attachment.
2001-06-11 21:33:47 +00:00
bjh21 33afab3251 Add a short-circuit return from wdcprobe for IDE controllers without pullup
resistors, which return the last value written to the bus on a read.  This
makes detecting empty channels on my HCCS and D.T. Software IDE interfaces
rather faster.
2001-06-11 21:18:36 +00:00
thorpej fb2f3ce7e5 Regen; Add Level One vendor ID, and LXT-1001 10/100/1000 Ethernet
product ID.
2001-06-11 21:13:49 +00:00
thorpej ec5280c1ed Add Level One product ID, and LXT-1001 10/100/1000 Ethernet
product ID.
2001-06-11 21:12:29 +00:00
sommerfeld 0463a8a3d7 Replace magic numbers in trap code with offsetof()
Deal better with traps during register restore.
Explain a bit more about what's going on here.
2001-06-11 20:04:02 +00:00
bjh21 bd73477f94 Parentheses around definition of PODULE_GAP. 2001-06-11 19:07:14 +00:00
matt 95be56d2e1 Only include dependency on include-dirs if the include directory doesn't
exist.
2001-06-11 17:50:34 +00:00
matt ba4b09844f Use command Makefile.arm. Move non-std LOADADDRESS to std.netwinder. Add
netwinder-specific inclusion Makefile.
2001-06-11 17:46:23 +00:00