as described in
http://mail-index.netbsd.org/tech-kern/2012/06/23/msg013442.html
PMP support in integrated to the atabus layer.
struct ata_channel's ch_drive[] is not dynamically allocated, and ch_ndrive
(renamed to ch_ndrives) closely reflects the size of the ch_drive[] array.
Add helper functions atabus_alloc_drives() and atabus_free_drives()
to manage ch_drive[]/ch_ndrives.
Add wdc_maxdrives to struct wdc_softc so that bus front-end can specify
how much drive they really support (master/slave or single).
ata_reset_drive() callback gains a uint32_t *sigp argument which,
when not NULL, will contain the signature of the device being reset.
While there, some cosmetic changes:
- added a drive_type enum to ata_drive_datas, and stop encoding the
probed drive type in drive_flags (we were out of drive flags anyway).
- rename DRIVE_ATAPIST to DRIVE_ATAPIDSCW to better reflect what this
really is
- remove ata_channel->ata_drives, it's redundant with the pointer in
ata_drive_datas
- factor out the interpretation of SATA signatures in sata_interpet_sig()
propagate these changes to the ATA HBA drivers, and add support for PMP
to ahcisata(4) and siisata(4).
Thanks to:
- Protocase (http://www.protocase.com/) which provided a system
with lots of controllers, SATA PMP and drive slots
- Conservation Genomics Laboratory, Department of Biology, New Mexico State
University for hosting the above system
- Brook Milligan, who set up remote access and has been very responsive
when SATA cable move was needed
- initialize it properly in the bus front-ends (all 2, exept in wdc_pcmcia.c
for the "Sandisk CompactFlash Card" where it's set to 1)
- remplace hardcoded '2' by ata_channel->ch_ndrive in MI IDE drivers.
From Christos Zoulas in kern/32501.
wdc_regs structure, and array of which (indexed per channel) is pointed
to by struct wdc_softc.
- Move the resulting wdc_channel structure to atavar.h and rename it to
ata_channel. Rename the corresponding flags.
- Add a "ch_ndrive" member to struct ata_channel, which indicates the
maximum number of drives that can be present on the channel. For now,
this is always 2. Add an ATA_MAXDRIVES constant that places an upper
limit on this value, also currently 2.
registers are registers that overlap with others on many controllers, but
which may actually be distinct on some controllers. Right now, the two
shadows are:
- wd_status (usually overlaps wd_command)
- wd_features (usually overlaps wd_error)
Add a new helper function, wdc_init_shadow_regs(), used to initialize
the shadow register handles on controllers where they do actually overlap.
Partially from Jordan Rhody @ Wasabi Systems, Inc.
- wdc_xfer to ata_xfer
- channel_queue to ata_queue
and move them to <dev/ata/atavar.h> so they can be used by non-wdc ATA
controllers. Clean up the member names of these structures while at it.
in a different fashion. Individually, they have the same functionality,
but their layout is different. An example of such a chipset is
the Promise 203xx.
To be able to deal with this, transform the cmd and dma bus_space handles
into an array of handles, each seperately created with bus_space_subregion.
The code generated by using the extra indirection shouldn't change much,
since the extra indirection is negated by having the offset calculation
already done in bus_space_subregion. E.g.
bus_space_write_4(tag, handle, offset, value)
becomes
bus_space_write_4(tag, handles[offset], 0, value)
Reviewed by Manuel Bouyer. Tested on wdc_isa, wdc_pcmcia, viaide, piixide (i386)
and on cmdide (sparc64).
http://mail-index.netbsd.org/tech-kern/2003/09/25/0006.html
This adds a device (atabus) between IDE controllers and wd or atapibus, to
have each ATA channel show up in the device tree. Later there will be atabus
devices in /dev, so that we can do IOCTL on them.
Each atabus has its own kernel thread, to handle operations that needs polling,
e.g. reset and others.
Device probing on each bus it defered to the atabus thread creation.
This allows to do the reset and basic device probes in parallel, which reduce
boot time on systems with several pciide controllers.
most polling.
2) Clean up some goofiness in pciide -- get rid of the whole "candisable" path
(it's gratuitous) and simplify the code by calling pciide_map_compat_intr(),
*_set_modes() and wdc_print_modes() from central locations.
3) Add a register writability and register ghost test to eliminate phantom
drives more quickly.
an array of fixed-sized channel_softc elements. This way IDE controllers
which more than 1 channel (pciide) can extend the channel data easily
for private needs.
To avoid the double dereference at runtime, change the argument of
wdcstart() to the channel data pointer instead of the array index.
that sc_ad.ioh is the 8-byte region as opposed to blindly passing it
the first region.
With this change, and a device def which will follow, the IDE controller
on my OPTi Audio 16 card works!
