017b9af5fe
Clarify with a specific reference to the manual page in question.
1998-08-09 04:58:08 +00:00
b3853549b3
Always copy back both the record and play parameters, in case the driver had
...
to change one behind our back.
1998-08-09 04:54:44 +00:00
12f5a41e1f
Make the previous slightly more robust, and set AUDIO_PROP_INDEPENDENT.
1998-08-09 04:40:55 +00:00
c8532af3b2
Make sure the sample rate is the same on both channels, tracking the change
...
from one channel to the other if only one is active.
1998-08-09 04:14:47 +00:00
759ca5ee0c
The manual says to use the other crystal for 22050Hz.
1998-08-09 03:48:42 +00:00
5d236ade07
minr KNF nit ..
1998-08-09 03:16:23 +00:00
fe3c14b64d
use __sparc__ not sparc
1998-08-09 03:12:39 +00:00
565adbaffb
Set the FIFO control bits correctly so that stereo recording works.
1998-08-09 02:54:50 +00:00
80457a2c65
Use auto-initialize DMA for recording.
1998-08-09 02:05:52 +00:00
093a8daf6b
Go to splhigh in the debugger.
1998-08-09 00:00:57 +00:00
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
c49235f44c
Use splnet(), not splimp().
1998-08-08 23:44:12 +00:00
7795559d04
Use splaudio on the arm32 port.
1998-08-08 23:40:03 +00:00
d5eb56b2c2
Move splclock and splaudio outside splimp.
1998-08-08 23:39:38 +00:00
f996a2e194
Define IFM_INST_MAX, the largest possible "instance" value.
1998-08-08 22:12:30 +00:00
254afcaecb
Sleeping forever kinda sucks.
1998-08-08 21:37:00 +00:00
09502c9fb2
Fix -Werror compilation failure due to lack of a couple of 'const's.
1998-08-08 20:57:55 +00:00
17932f0575
Set the correct modes for the record channel.
1998-08-08 20:55:36 +00:00
e9534620b0
Netboot support for KA46 (VS4000/60).
1998-08-08 16:10:41 +00:00
88191aeeee
Reduce this file as done in the Alpha RAMDISK configuration, which makes
...
keeping it in sync less prone to errors.
1998-08-08 12:59:43 +00:00
4d9c340f85
Pathconf: for V2 mounts, revert back to failing with EINVAL if an RPC would
...
be necessary to obtain the information, as this fits the pathconf semantics
of `no association supported' better than `no limit available.'
1998-08-08 11:39:20 +00:00
8fdb1c8ebe
Lots of kernlib functions rewritten as inline macros.
1998-08-08 11:18:32 +00:00
94e9a8651a
Forgotten to commit this in last change.
1998-08-08 11:00:33 +00:00
815f9f2445
1. Untangle preprocessor conditionals for sanity and {} balance
...
2. Fix a race between the first callout and the first non-polled ncr_start()
1998-08-08 00:14:08 +00:00
86233eeede
Regen again, to indicate which master revision these were generated from.
1998-08-07 17:21:35 +00:00
a6b5ab0c92
Moved parioctl.h to the system header directory.
1998-08-07 16:16:36 +00:00
4c4cdda003
Switched to MI zs driver.
1998-08-07 11:19:13 +00:00
e081a838b5
Add client pathconf support.
1998-08-07 11:02:39 +00:00
dabc8eb436
Implement the 'i' flag which makes the bootloader ask for the file to
...
load (as in OSF/1).
Useful for netboot where "-file" doesn't work as needed.
1998-08-07 10:38:37 +00:00
49637cda8d
use an md keyboard beep replacement function on alpha too
1998-08-07 10:28:36 +00:00
e8564df3b9
implemt a simple "beep" device to access the ISA speaker
1998-08-07 10:26:38 +00:00
026fbbe2db
Match PCI-ISA bridges on class/subclass instead of vendor/device.
...
2 reasons:
-no need to keep a list of all known parts
-there is at least 1 bridge (ACC micro 2051) which reports the same
device ID for its various subfunctions; this would require an additional
check in the match function
(keep the old list inside #if 0 in case one of the historical bridges
doesn't report the right class/subclass - I can't check them all)
1998-08-07 10:15:32 +00:00
9bb616c621
Regen.
1998-08-07 06:59:31 +00:00
88c6239026
Add product IDs for the 3Com Cyclone-based PCI Ethernet devices,
...
the 3c90xB DMA-only cards.
1998-08-07 06:58:57 +00:00
558733ffc6
Track our carrier status and report it in the media status callback.
1998-08-07 05:55:14 +00:00
202c97c54d
Add an isapnp frontend for the ess driver. It somewhat works
...
(sounds is made but one buffer is played continuously).
1998-08-07 00:53:23 +00:00
7b044dea51
Make the irq checking logic somewhat less bogus.
1998-08-07 00:51:06 +00:00
51bb504a6e
Report a sensible MIDI device name.
1998-08-07 00:28:20 +00:00
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
741d372539
Like for NFSv2, add a pointer to the NFSv3 RFC, too.
1998-08-06 19:44:28 +00:00
ddb9746a51
Define the minimum and maximum "network type" values. These values are
...
incremented by the minimum to interate through them.
1998-08-06 19:16:37 +00:00
d082dd3db4
Moved grfioctl.h and iteioctl.h to the public include directory.
1998-08-06 14:08:53 +00:00
02c9ad1755
And fix pastos.
1998-08-06 12:26:51 +00:00
a79bb0d7ae
Fix tyop.
1998-08-06 12:23:39 +00:00
546365a27e
_POSIX_SOURCE -> _POSIX_C_SOURCE
1998-08-06 11:25:04 +00:00
709dda58f8
_POSIX_SOURCE -> _POSIX_C_SOURCE, and add missing protection bits.
1998-08-06 11:22:57 +00:00
e2a2525203
fix incorrect length of LOCATE CDB (reported in PR kern/5306 by
...
Dave Huang <khym@bga.com>)
1998-08-06 10:20:38 +00:00
62cff0207c
comment out the prototypes for bcopy, ovbcopy, bzero, and bcmp.
...
uncomment macros transforming into memcpy, memmove, memset and memcmp.
the prototypes should be deleted from the file some time soon.
1998-08-06 04:50:14 +00:00
b84f472652
Sigh. "consts in prototypes can be quite a drag..."
...
fix last two fixes one more time, this time dealing with ugly
prototype issues, including the fact that the bcopy returns nothing,
but memcpy returns a void *. Never mind that we don't use it...
1998-08-06 04:37:57 +00:00
9f63941cfa
Fix botched prototype decl in last fix.
1998-08-06 04:25:55 +00:00
mycroft