6975538bda
add beagleboard
2013-02-10 16:40:21 +00:00
84874dc42c
always use ${MKNOD} for consistency
2013-02-10 14:54:33 +00:00
158210c439
pass more tools down.
2013-02-10 14:26:32 +00:00
96add05603
Follow a different approach to install the kernel and compress the image.
2013-02-10 01:24:40 +00:00
f73dde4fda
get the kernel from the release directory.
2013-02-09 20:47:06 +00:00
02bfcabc8d
merge back changes I undid
2013-02-09 18:59:19 +00:00
8070b25e81
hook image building for rpi.
2013-02-09 18:49:55 +00:00
df473aee24
PR/47540: Felix Deichmann: DSA keys can only be 1024 bits.
2013-02-07 19:32:19 +00:00
6c17c16f94
build the armv5t, armv6 and armv7 kernels for earm but only the v6 and v7
...
for earmhf.
2013-02-06 01:31:55 +00:00
4c0c51981c
Only include debug set obsolete set if MKDEBUG is not no
2013-02-05 16:39:26 +00:00
2947c6f2d5
Add earmhf support
2013-02-05 07:34:07 +00:00
ea2a4e9bad
Add debug to the list of OBSOLETE_FILES
2013-02-05 07:32:44 +00:00
b1d97a6429
Make custom "reload" target work. Before this fix it would have tried
...
to send a HUP signal to "wpa_supplicant" instead.
2013-02-01 13:29:33 +00:00
80695a814b
spwd.db should be 0600 (Brooks Davis)
2013-01-29 20:21:02 +00:00
162b6b9919
The console major number is not always 0; when creating a temporary
...
console while populating a memory disk, use %CONSOLE_CMAJOR% instead
of 0, and let MAKEDEV.awk substitute the appropriate machine-dependent
major number.
This fixes a bug that I introduced in revision 1.82 dated 2007-03-11.
2013-01-26 18:44:21 +00:00
fa9d9d71df
Update LLVM/Clang snapshot to r172366. Catch up with the move past 3.2
...
release.
2013-01-23 15:02:52 +00:00
e6e5cc51b8
Support a release build restricted to ALL_KERNELS. This file was missed
...
by the first commit.
2013-01-14 20:05:42 +00:00
bf86f39b04
Add an entry for wscons ttyE0.
2013-01-14 09:23:45 +00:00
a91aefab1f
Tweak ramdisk devices.
...
- create sd2 and sd3 for external SCSI disks on LUNA-II
- ipty (2 ptys) is enough for sysinst rather than opty (16 ptys)
2013-01-14 09:15:57 +00:00
281a5e1fdb
Add ppp=YES variable. Currently pppd(8) starts automatically if ppp_peers
...
is not empty. Adding a ppp variable allows the default peer to be set,
and ppp set to NO so that dialing can happen with /etc/rc.d/ppp onestart.
Default set to YES so that old behaviour is preserved.
http://mail-index.netbsd.org/tech-userlevel/2012/08/21/msg006656.html
2013-01-13 18:47:57 +00:00
9dc19ed03b
Nix `-b 1024' from ssh_keygen_flags in /etc/defaults/rc.conf.
...
No objections on tech-security:
http://mail-index.NetBSD.org/tech-security/2012/09/03/msg000548.html
The security of generating keys at boot remains questionable, but
this change makes that no worse.
2013-01-11 04:32:41 +00:00
5c014ba1cf
Create a plcom0 device node for RaspberryPI
2013-01-10 13:38:37 +00:00
43eb4b820e
D.ROOT-SERVERS.NET changes IPv4 address.
2013-01-08 11:15:49 +00:00
191ca062bf
add a sync to make it less likely to boot with /etc pointing to nothing after
...
a crash.
2012-12-31 23:21:27 +00:00
7c8b13934d
better messages, more quoting.
2012-12-29 22:15:07 +00:00
93a9300055
add entries built for MKDEBUG and MKDEBUGLIB to the set lists
...
Thanks to Hisashi T Fujinaka <htodd@twofifty.com> for pointing out the gap.
2012-12-18 22:45:12 +00:00
448aa50d4c
Reinstate the dirname invocations that were recently removed from
...
rc.d/random_seed. The new dirname shell function provided by rc.subr
will be used, so it should work before the /usr file system is mounted.
This should fix a problem in which the fs_safe shell function failed when
passed the name of a file that did not exist.
2012-12-17 18:20:50 +00:00
532fa0d9ae
Add shell implementations of basename and dirname to rc.subr. They
...
are supposed to mimic basename(1) and dirname(1), except that they
are usable before /usr/bin is mounted.
2012-12-17 18:17:27 +00:00
c755e023f2
Avoid using programs from /usr/bin. This should fix PR 47326.
...
- no need for "dirname", because "df -G" can take a file name directly.
- replace use of "awk" with a shell while read loop.
- replace use of "stat -s" with "ls -ldn".
- no need for "tail" now that the use of "stat" has changed.
While here, also add some shell quotes and improve the grammar in a comment.
2012-12-14 18:42:25 +00:00
0450412e67
Revert previous.
...
At the least, it was committed with the wrong commit message.
2012-12-13 21:51:52 +00:00
8c91938135
Add a pidfile and the reload command.
2012-12-13 15:51:17 +00:00
0d6a8650f8
Make the compat libs of npf extension shared libraries go to the
...
compat directories instead of overwriting the arch native libs.
Also, make sure the compat directories get created. Tested on amd64.
2012-12-09 22:06:21 +00:00
4d6ed13889
Make sure that ntpd creates a pid file for the rc machinery to work.
...
http://mail-index.netbsd.org/current-users/2012/11/19/msg021518.html
2012-12-04 16:38:40 +00:00
3e31590ff0
Add src/etc/Makefile.params, containing the definition of the
...
RELEASEVARS variable, and commands related to printing the values of
the variables whose names are in RELEASEVARS.
Add an awk script to remove noise printed by "make -j" or high levels
of MAKEVERBOSE, so we get only the variables names and values. The
values are escaped so that variables containing embedded newlines,
quotation marks, and backslashes, are passed through safely.
Adapt src/etc/Makefile and src/Makefile to use the new ${PRINT_PARAMS}
command defined in src/etc/Makefile.params.
Now ${DESTDIR}/etc/release and the params file in the top-level
.OBJDIR should never contain unwanted noise, even after a build with
MAKEVERBOSE=4.
2012-12-03 13:53:28 +00:00
a23dfbdc09
Adjust for usr/tests/lib/libc/c063 debug entries.
2012-11-23 08:36:47 +00:00
7feb2e8135
Also give install a place to put the atf tests for netpgpverify
2012-11-20 15:41:43 +00:00
7e4aef559e
Fix the build - give install a place to put verify.h !
2012-11-20 15:02:44 +00:00
a76c1cc17f
Add most system calls for POSIX extended API set, part 2, with test cases:
...
faccessat(2), fchmodat(2), fchownat(2), fstatat(2), mkdirat(2), mkfifoat(2),
mknodat(2), linkat(2), readlinkat(2), symlinkat(2), renameat(2), unlinkat(2),
utimensat(2), openat(2).
Also implement O_SEARCH for openat(2)
Still missing:
- some flags for openat(2)
- fexecve(2) implementation
2012-11-18 17:41:51 +00:00
00ed5c3931
We don't need to include <bsd.prog.mk> to install a few config files
...
just <bsd.files.mk> and <bsd.links.mk> is enough.
Noticed because <bsd.prog.mk> sets LINKSMODE to BINMODE and that does
the wrong thing at least for unprivileged builds.
2012-11-17 23:08:38 +00:00
a02a44ee48
Adjust for tests/lib/{libbpfjit,libsljit} debug entries.
2012-11-12 09:03:52 +00:00
062bf78a84
Build libbpfjit test to the build.
2012-11-11 17:41:31 +00:00
5f5f1a05cc
Cause /etc/rc.d/random_seed to be the first script to run
...
after mountcritlocal. Everything else that runs after
mountcritlocal depends directly or indirectly on bootconf, so
making random_seed run before bootconf has the desired result.
2012-11-10 15:10:22 +00:00
e36b9f4a97
Make /etc/rc.d/ttys run after /etc/rc.d/bootconf.sh,
...
because bootconf could conceivably change /etc/ttys.
2012-11-10 15:08:36 +00:00
ffd8736098
Build sljit test when MKSLJIT != no and set MKSLJIT to yes on amd64 and i386.
2012-11-05 00:57:39 +00:00
acfd2b168d
motd needs to be re-generated when DISTRIBVER changes, so change he
...
Makefile to use the new ${_NETBSD_VERSION_DEPENDS} mechanism defined in
bsd.own.mk.
Rename the default motd file in the source tree from "motd" to
"motd.default", because otherwise it would conflict with the motd file
that is now created in the .OBJDIR.
2012-11-04 11:09:14 +00:00
040e0f875d
Add DISTRIBVER to the list of variables under RELEASEVARS.
2012-11-04 11:04:10 +00:00
a015b2b8c4
print something before sleeping so that a user like me can see
...
what the mysterious pause is.
2012-11-02 08:36:13 +00:00
578c31536d
catch up with npfctl moving to /sbin.
...
untested, but i guess so was the move itself ;)
2012-11-01 06:06:14 +00:00
410421ee21
Avoid using glob patterns that might match enough files to give
...
"Arg list too long" errors. Change the "find" command to use
"-exec ... +" instead of "-exec ... \;" to make it more efficient.
2012-10-24 21:23:55 +00:00
d5c3f2d0b1
Add the next three /dev/pci nodes.
...
Marvell Orion already exposes two.
2012-10-13 01:13:59 +00:00
b1203a9851
Make mandb path configurable. makemandb (and related tools) use
...
the path from the _mandb variable from man.conf now.
Set _mandb in man.conf to same value as was used before.
From Abhinav Upadhyay <er.abhinav.upadhyay@gmail.com>.
2012-10-06 15:33:59 +00:00
d60db5e056
PR/47024: Taylor R Campbell: handle "keys" directory and directory
...
permissions in general
2012-10-01 18:46:43 +00:00
35b7579ba4
add more sd and pci devices.
...
remove duplicate ch0.
2012-09-23 01:15:17 +00:00
f2b31f39d0
Add a pass-through ioctl for mfi(4), allowing userland to send raw commands
...
to the controller. This is compatible with the linux and FreeBSD
implementations.
Add the needed conversion for mfi ioctls in COMPAT_LINUX
Allocate a character major number, and create /dev/mfi0 by default
on amd64 and i386.
This allows (along with a hand-created /emul/linux/proc/devices file)
to run the MegaCLI linux binary provided by LSI.
2012-09-19 21:24:28 +00:00
2d427fcfd7
Add ./usr/libdata/debug/usr/lib/npf for rmind
2012-09-18 15:12:31 +00:00
9ee81fc63b
- Add OPENRD.
...
- Compile BEAGLEBOARD_INSTALL.
2012-09-17 15:37:33 +00:00
94cf4e2062
Add /usr/lib/npf.
2012-09-16 16:15:29 +00:00
e8e9f65b79
New test directory for npf
2012-09-12 14:07:10 +00:00
647d3a97c1
Make the "init" target create optys as well - those were removed from "all",
...
but we still need them in emergency setups and some install media.
Should fix PR install/46902.
2012-09-05 08:25:53 +00:00
982f691177
Add BCM5301X
2012-09-01 02:03:35 +00:00
47aef1fbf4
Add lots more ldN dkN
...
Add drvctl to md
2012-09-01 01:45:17 +00:00
c9ea1856a7
Use new makemandb -Q flag to be really quiet.
2012-08-29 20:34:18 +00:00
0ac85cc05d
- fix manet alias to MANET; giving an alias with the same name is a no/op
...
- protocol 84 is defined for as ttp and iptm, merge the two entries since
libc getprotoent() does not read the whole file and merge in the "files"
implementation.
2012-08-28 07:53:45 +00:00
9f498223f2
Handle any reports of state changes for INDICATORs
2012-08-27 21:50:19 +00:00
80b30d8cdf
Add placeholder test programs for share/mk files.
...
The main goal of this change is to simplify the further addition of test
cases for the share/mk infrastructure by adding a few placeholder test
programs to the tests tree.
To not leave these test programs empty, I have added a bunch of extremely
simple test cases to them.
2012-08-26 23:03:20 +00:00
1ebd502870
Fresh from IANA
2012-08-25 11:14:33 +00:00
c60c5ec2d8
actually install the new npf examples
...
add examples for a hash table file and a tree table file
add an ID string to host-npf.conf
2012-08-22 06:45:15 +00:00
6b4ba5789b
Seems like all the trendy ramdisks are using "makedev ipty" rather than
...
"makedev pty0" now. Update vax to match so install media doesn't fail
with
.../MAKEDEV: pty0: creating BSD style tty nodes with ptyfs is a security issue
2012-08-18 00:50:37 +00:00
a727e4697d
Install live images and install images into ${RELEASEDIR}/images by
...
default, to keep all the large files (such as ISOs) together.
2012-08-17 16:59:26 +00:00
7e916bb8a9
Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
...
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.
2012-08-16 13:31:24 +00:00
e7e64dcaa1
Build and install t_bpfilter.
2012-08-14 19:13:54 +00:00
79aa9f3662
add fdpass directories
2012-08-13 11:17:43 +00:00
a0fa559338
Don't create BSD style pty nodes by default anymore since ptyfs is mounted
...
by default. Mention that this is a security issue, since it allows pty access
through the old style node.
2012-08-13 08:30:51 +00:00
ba9bed30be
No need to specify nfsd flags anymore. The defaults DTRT.
2012-08-13 08:20:44 +00:00
127e888ae2
Add earm/earmeb changes
2012-08-06 07:51:13 +00:00
3351729a81
only announce fetching vulnerabilities file if we do.
2012-08-03 10:52:46 +00:00
ba9c08beed
Add ub to KERNEL_SUFFIXES.
2012-08-03 09:11:31 +00:00
93654fca4a
Add TWRP1025 and INSTALL_TWRP1025
2012-08-01 05:46:13 +00:00
45c7c05a4b
Call `makemandb -f -q` instead of `makemandb -f`, as Edgar Fuß proposed for daily.
2012-07-31 12:11:50 +00:00
778f4384b4
PR/46757: Check for fetch_pkg_vulnerabilities unset first.
2012-07-31 09:23:09 +00:00
890333e6c9
Call `makemandb -q` instead of `makemandb`, as proposed by Edgar Fuss on
...
tech-userlevel on 20th of July 2012, 12:38.
2012-07-30 22:13:38 +00:00
da43ca12af
PR/46757: Edgar Fuß: Change default to pkg_vulnerabilities from NO to unset,
...
and make unset insted of NO to produce warnings, so that setting it to NO does
produce warnings (if it is inappropriate for the machine to warn about this).
2012-07-30 17:09:33 +00:00
e763a079db
PR/46756: Edgar Fuß: Enable ignoring subdirectories in daily's find_core
2012-07-30 17:06:51 +00:00
734339d201
Add testcase for PR/46743
2012-07-28 16:08:39 +00:00
b6cf8ec026
Add RPI to KERNEL_SETS
2012-07-26 20:50:44 +00:00
c91c5846f7
+ /usr/tests/usr.bin/nbperf
2012-07-22 21:04:44 +00:00
bdb2cc007b
MKCRYPTO_{IDEA,MDC2} is no more
2012-07-14 04:01:11 +00:00
fd0228cf47
Also build WSCONS kernel.
2012-07-09 18:12:11 +00:00
f9669c1ea4
It's msdos, not msdosfs.
2012-07-08 14:25:49 +00:00
40d2eec2c6
Disable GENERIC_USERMODE kernel auto-build to avoid problems with the current
...
autobuild-system.
2012-07-04 13:54:20 +00:00
da54453f2c
Ensure the ramdisk has bpf for dhcpcd
2012-07-04 08:03:08 +00:00
bd1c4855ff
All apply to vax only:
...
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)
2012-07-03 21:49:55 +00:00
e631798833
Move i386 and amd64 usermode configurations to their respective directories
...
and make the usermode kernels buildalbe under build.sh.
The resulting kernels are build and packaged correctly as are the associated
modules.
2012-06-30 15:03:56 +00:00
690d3837f6
add ldpd rc.d script here too
2012-06-28 16:34:06 +00:00
cb9b109d3a
do as sparc64 does and switch the default terminal type to wsvt25
2012-06-26 02:05:43 +00:00
55657a2741
PR/46601 - Jim Bernard -- add support for rc_directories
2012-06-25 07:22:45 +00:00
351c7b5d8f
- Add racd* devices for MSCP based CD-ROM drives (RRD40s), as opposed
...
to mixing them in with the ra* disks, modelled loosely on how MSCP
rx* floppies are handled
- racd* defaults to the same single iso9660 partition as cd*
- Cleanup config option handling slightly so any combination of ra*,
rx* (and now raccd*) can be defined without build errors.
- Avoid ugly printf when disks have all zero disklabel magic number
2012-06-22 20:42:22 +00:00
a1f0720d45
Add raid0 to init), in case we have /tmp on mfs.
2012-06-21 19:22:07 +00:00
ef11cb81d1
Add directory for usr/include/dev/filemon/
2012-06-21 04:30:04 +00:00
b1d94e60d6
Remove unnecessary checkyesno which I commited before.
...
${rcvar}_start is skipped if rcvar is not set to YES.
Pointed out by joerg@ and tsutsui@.
Should be pulled up to netbsd-6.
2012-06-17 02:13:13 +00:00
c9196b81ce
Update LLVM/Clang snapshot to r158533. This brings in support for
...
stack-realignment in functions using alloca on x86. Move to
/usr/include/clang-3.2 to reflect the version.
2012-06-16 17:01:02 +00:00
25290a5966
Set commented out maxproc-cur and openfiles-cur default values to the actual
...
defaults from sys/sys/syslimits.h. Bump maxproc-max too to a typical value.
2012-06-14 09:28:02 +00:00
49449523c7
Add firmware for the RealTek RTL8192CU family of wireless chipsets, and
...
adapt the urtwn(4) driver to use the new files. The firmware files were
extracted from the Linux driver at www.realtek.com, version 0005.1230.2011
and the license permits redistribution without modification.
While I'm here, install the files in /libdata/firmware/if_urtwn, like
most of the other network adapter firmware.
urtwn(4) can now operate without needing external files installed. Tested
on my Edimax adapter.
2012-06-14 04:14:35 +00:00
c2e51849fc
Per discussion on tech-userlevel, finally fix PR 10127:
...
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.
2012-06-13 20:49:11 +00:00
f28248caf4
Allows you to disable it if makemandb=NO in rc.conf.
...
Thanks tsutsui@ and Yasushi Oshima.
2012-06-12 02:25:29 +00:00
c1004a7836
Add a basic test for infocmp - this would have cought todays terminfo
...
lossage (PR lib/46553).
2012-06-06 21:23:10 +00:00
ac2c5cf13a
Invoke MAKEDEV.local via $HOST_SH (default ${HOST_SH:=sh}) instead of
...
hardcoded "sh" to avoid unexpected errors on cross build hosts in
src/distrib/common/Makefile.makedev etc.
Should fix PR toolchain/46537, ok apb@
2012-06-05 13:20:01 +00:00
1907ec3a61
Switch device database to cdb(5). Rework ttyname(3) and ttyname_r(3) to
...
depend on new devname_r(3) as heart. Add /dev/pts magic directly to
devname(3). While it can lead to returning non-existing paths, the
behavior is more consistent that way. Drop caching layer in devname(3),
it doesn't buy anything for the common case of having access to the
database. Teach devname(3) proper fallback behavior of scanning /dev.
Create both old-style and new-style database for now in /etc/rc.d/sysdb.
2012-06-03 21:42:44 +00:00
44184cf8bf
PR/46521: Jim Bernard: remove duplicate -o
2012-06-02 15:52:24 +00:00
c9051a9fd6
Use /libdata/firmware/run instead of /libdata/firmware/rum for run(4) firmwares.
2012-06-01 13:19:38 +00:00
f1b12ec580
Add new test directory
2012-05-27 23:03:24 +00:00
3debe0af82
Create /dev/iscsi0 as part of 'all'.
2012-05-26 00:36:15 +00:00
bc77bb37cd
Add a GENERIC.MP kernel config and add it to the build list so that it
...
gets build tested.
2012-05-23 08:19:40 +00:00
af62c3b4d8
Add a test case for PR kern/46463. From Richard Hansen.
2012-05-18 15:25:25 +00:00
7591311640
Add the ability for staticroute to evaluate lines from /etc/route.conf
...
as shell script fragments, add example to the route.conf man page of
evaluating variables.
Remove route.conf man page statement that staticroute is enabled in
rc.conf since that's incorrect.
Wrap the staticroute while in parens, per <apb> & <christos>, and
quote all the arguments for the evals.
2012-05-02 15:57:15 +00:00
0ffe024507
Update entries for proper PSX16550 com port device names.
2012-04-29 07:21:10 +00:00
058310c688
Create ttyC0 and ttyC1 for PSX16550 com ports.
2012-04-29 07:19:08 +00:00
a1da65bdfb
Change root's default shell to /bin/sh, to provide a default which
...
has command line editing, tab completion, and other features users
have come to expect from a modern OS.
Discussed on current-users approximately two weeks ago. Should be
pulled up for NetBSD 6.0.
2012-04-25 16:11:26 +00:00
c7358053ef
Add a test case for PR bin/39546.
2012-04-19 18:51:35 +00:00
0953dc8744
Add a test case for PR kern/46328 (tested naively with tcpdump(8)).
2012-04-14 12:21:45 +00:00
df3c343ded
Revert previous - k_helper3 does not get installed in a subdirectory.
...
Doing it this way will prevent us from creating the subdirectory on
non-MODULAR systems. That would have caused a build break due to the
unexpected empty directory.
2012-04-14 02:48:44 +00:00
04ec1fc554
Create the directory for the helper program; hopefully fixes the build
...
break.
XXX It's odd that k_helper3 needs to have its directory pre-created, when
XXX k_helper, k_helper2, and k_uvm don't need it...
2012-04-14 00:14:22 +00:00
5ba1ea26d4
fix use of setenv in a comment, noted by "stu314" on freenode.
2012-04-10 19:02:30 +00:00
23fb23b458
Gracefully shutdown upon reaching critical temperature levels. Prevents few
...
laptops (ThinkPad T61 and x61s, among others) from hitting the in-CPU reset.
2012-04-10 13:58:52 +00:00
850b856e4a
back out change that makes onestart work, to be committed at some other time.
2012-04-07 17:28:44 +00:00
05e9a23818
give wedges to everyone
2012-04-07 17:22:10 +00:00
f932526a86
The error message when /var is not a file system chhanged from
...
mount: unknown special file or file system `/var'
to
mount: Unknown special file or file system `/var'
so match them both.
2012-04-07 16:39:32 +00:00
c6302b7410
change security so that there is a configuration value for the list of
...
users who will not be considered for duplicate uid check.
Seed it with 'toor' in defaults/security.conf.
2012-04-05 09:09:27 +00:00
47dea51ec6
Add regression tests for PR bin/3914 and PR bin/27140.
2012-03-30 09:27:10 +00:00
651e2c6948
Add regression tests for the 1990s bugs PR bin/3538 and PR bin/4841.
2012-03-27 08:16:33 +00:00
db4c04c984
Added urtwn(4), a driver for Realtek RTL8188CU/RTL8192CU USB IEEE 802.11b/g/n wireless network devices.
2012-03-25 00:11:16 +00:00
327776ba0b
Add regression tests for PR bin/12424, PR bin/12316, and PR bin/14253,
...
all fixed long time ago.
2012-03-20 06:18:33 +00:00
d0df4f4862
Adjust to unbreak mkdebug build.
2012-03-19 11:16:36 +00:00
3a662fafc9
Add regression tests for PR bin/2642 and PR bin/23836, both fixed long ago.
2012-03-19 07:05:18 +00:00
1ff69b68e3
Add a case for PR bin/44973.
2012-03-18 12:40:42 +00:00
0498995f9f
Add a test case for PR bin/28126. Does not fail with GNU sed.
2012-03-18 10:12:30 +00:00
840bc631fa
Adjust set lists and mtree.
2012-03-17 17:16:41 +00:00
2fb9c76e0d
Adjust set lists and mtree.
2012-03-17 16:35:02 +00:00
87ec685886
Disable generation of boot floppy images for sparc, which do not fit on
...
floppy disks anymore, to unbreak the build (for now).
If someone feels like adding and testing ustarfs support in the floppy
/boot, please reenable again.
2012-03-14 13:26:43 +00:00
869580eb48
Adjust set lists and mtree.
2012-03-11 18:45:19 +00:00
7a324bfe36
Point first to 6.0 packages, then to packages for 5.1 or 5.0.
...
The latter have reduced usefullness in -current or netbsd-6 until
we have a compat50 package.
2012-03-11 17:28:47 +00:00
50de5b0f94
Can't use Bourne shell syntax here... (Even in comments, for PKG_PATH.)
2012-03-11 17:23:55 +00:00
c513c5c06e
add awk test directory
2012-03-10 19:11:36 +00:00
4e4e8d92ec
Quoting sys/dev/vme/files.vme commit log: "vmegeneric never saw the
...
light of the source tree. After 7 years, I guess nobody missed it."
OK by wiz@
2012-02-25 10:55:27 +00:00
7b6c3db855
Four instances of atabus(4) are not enough for modern systems as the
...
system will report one instance for each SATA port. Create eight
device nodes by default.
2012-02-25 09:19:30 +00:00
f7c0729136
Remove ttyv0 - there is no such device on this arch.
2012-02-23 09:35:44 +00:00
81cae6fbb5
Avoid rebuilding services database every boot time.
...
The database has been renamed since the default was changed to CDB format.
2012-02-21 12:30:32 +00:00
0b4daf6018
Add entries for bzip2 and xz.
2012-02-16 22:57:19 +00:00
481c9a313f
Do not create obsolete ./usr/include/quota directory anymore.
2012-02-16 22:22:27 +00:00
0ca3cd9bc0
Run makemandb with the normal 022 umask, not the restrictive 077.
2012-02-15 23:30:11 +00:00
8205b4eb47
Bump MV2120 SYMTAB_SPACE.
...
Add kernels variants for root on the primary partitions of "Drive 1".
Add MV2120 to evbarm release.
2012-02-14 15:09:02 +00:00
eb3bd4bbdc
Obsolete /usr/share/man/cat3f that never contained any files, nor will it.
2012-02-14 14:03:34 +00:00
0ce98f42a7
Move posix_spawn tests to lib/libc/gen/posix_spawn - they test both libc
...
and kernel, but that is an implementation detail unrelated to the tests
themselfs.
Ok: releng
2012-02-13 21:03:06 +00:00
19f52532ad
Add userland part of posix_spawn. Libc functions imported from FreeBSD.
...
Based on Charles Zhang's summer of code project.
2012-02-11 23:31:22 +00:00
6d92376f3a
Remove "spif[0-9]*" case from ports other than sparc{,64} by using
...
%stty_chr% and %sbpp_chr%.
Fix "MAKEDEV: bpp: unknown device" error on sparc{,64}, which is
observed in PR toolchain/45620 but not the fix.
Approved by releng.
2012-02-10 20:54:11 +00:00
e795c61763
Don't overwrite run_makemandb. The default is already set in daily.conf.
2012-02-09 13:38:44 +00:00
1c98a590d5
Include argument in command line
2012-02-07 23:15:33 +00:00
42e8e6b10a
Kill one more invocation of tbl. Noticed by wiz
2012-02-07 21:13:34 +00:00
849ff56477
Switch to using mandoc for formatting man pages as new default.
...
Stop building catpages by default.
2012-02-07 19:33:19 +00:00
410d0f4380
Import the new apropos/whatis.
...
This code has been developed by Abhinav Upadhyay as part of Google's Summer
of Code 2011. It uses libmandoc to parse man pages and builds a Full
Text Index in a SQLite database. The combination of indexing the full
manual page, filtering out stop words and ranking individual matches
based on the section gives a much improved user experience.
The old makewhatis and friends are kept under MKMAKEMANDB=no for now.
2012-02-07 19:13:24 +00:00
2e290c8200
For the sake of consistency with other scripts, output a full stop after the
...
word 'done'. releng ok.
2012-02-07 10:36:01 +00:00
61f445c845
Fix spello for the INSTALL_P2020* kernel configs.
2012-02-04 10:32:11 +00:00
8e1b1dc1f4
Build INSTALL_C700 ramdisk kernel and install into releasedir.
2012-02-02 16:02:44 +00:00
fe1bf23cfb
Build the INSTALL kernels for the P2020DS and P2020RDB
2012-02-01 21:56:40 +00:00
2c31d574e0
add the missing backslash.
2012-01-30 09:48:11 +00:00
77b78cdcff
Add FriendlyARM Mini2440 support.
...
- new code for Samsung S3C2440 SoC.
- update for other S3C2xx0.
This port was done by Paul Fleischer.
2012-01-30 03:28:33 +00:00
7b5ba30568
Build additional C700 kernel (for now).
2012-01-29 10:36:33 +00:00
d7450be19d
Use the correct userid
...
Hello, christos
2012-01-28 05:32:49 +00:00
493ac06fcb
- add _tss user for tcsd, and needed directories for TrouSerS.
...
This is all unused as of now because the trousers is not connected to
the build yet.
2012-01-28 02:17:29 +00:00
6fb39d18da
add a tpm driver from bsssd.sourceforge.net
2012-01-22 06:44:28 +00:00
be2c1ce5d3
use a more appropriate terminal type for ttyE*
2012-01-22 06:13:55 +00:00
e911228872
enable powerd by default
2012-01-22 06:10:35 +00:00
3cf69f27e2
Add "live-image" and "install-image" target support to build.sh.
...
"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.
"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.
For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html
No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.
Closes PR toolchain/45153 and PR misc/45155.
2012-01-22 03:53:29 +00:00
43fa5f922b
Clean up pow(4) (which I had removed in Nov 2011).
2012-01-21 02:52:50 +00:00
dc7062b2b8
use the join URL.
2012-01-16 22:20:45 +00:00
3dfcf5c1ba
Instead of using the general servers, use the ones allocated specifically
...
for the NetBSD project.
2012-01-16 22:12:41 +00:00
6bc6b7aae6
Now that the name of the ISO image is no longer stable, rename the
...
variable to make it possible to overwrite the default with
build.sh -V CDROM_IMAGE=...
2012-01-15 17:36:55 +00:00
ce4646dd28
PR# install/44593: Please give release ISO's more meaningful names
...
Change release ISO filenames, what was once 'i386cd.iso' will now look
like 'NetBSD-5.99.60-i386.iso'.
ok snj@
2012-01-14 22:56:30 +00:00
53e460df81
Create device nodes for wscons, raid, wd, and sysmon.
...
PR/45783
2012-01-07 16:12:30 +00:00
5dd52f2538
Add directory for libcrypt tests
2011-12-27 14:51:15 +00:00
b25081130c
Add a default for isibootd(8). Pointed out by nonaka@.
2011-12-23 05:05:04 +00:00
149eeb0360
bootmenu doesn't parse "prompt" as part of a command list, it must
...
stand alone.
2011-12-21 14:33:13 +00:00
19bd33b453
add fifofs
2011-12-21 01:58:46 +00:00
a7f5216f76
Add an rc.d(8) script for isibootd(8). Taken from ndbootd(8).
2011-12-17 13:37:49 +00:00
5bc4a2e2d4
Add option to include daily insecurity output in daily output.
...
PR bin/17029
2011-12-17 12:27:42 +00:00
1177cf8de7
Use random seed file (saved entropy) from default location by default
...
in i386 and amd64 boot.cfg.
2011-12-09 06:50:36 +00:00
093293c2cb
According to /etc/rc.d/mdnsd, /var/run/mdnsd is owned by _mdnsd:_mdnsd
...
if it created. So, set owner/group of /var/run/mdnsd.
It stop a useless warning in /etc/security.
2011-12-08 01:15:02 +00:00
0ce410dc8d
default powerd=YES if acpi is present
2011-12-04 13:09:07 +00:00
fd9f1e835b
- create scsibus1 for external SCSI bus on LUNA-II
...
- also create sd1 sd2 sd3 cd0 cd1 st1 devices on all_md
2011-12-02 16:01:50 +00:00
71d1bc8567
Enable SHEEVAPLUG for build.
2011-11-28 06:15:48 +00:00
aae64c95c0
Make the rndsave structure public -- the kernel will learn to read it
...
and sysinst may learn to write it (since, on some systems, most of
the keyboard input they ever get happens to be during install). Fix a
couple of minor problems with the random_seed rc script addition.
2011-11-26 01:17:17 +00:00
4924aa205a
Load entropy at system boot (only works at securelevel < 1); save
...
at system shutdown. Disable with random_seed=NO in rc.conf if desired.
Goes to some trouble to never load or save to network filesystems.
Entropy should really be loaded by the boot loader but I am still
sorting out how to pass it to the kernel.
2011-11-23 10:47:48 +00:00
77a099d5ff
Allow pf flags to be specified in rc.conf.
...
Add default to defaults/rc.d as suggested by lukem@
2011-11-21 20:56:21 +00:00
e60b9ec2c8
Add an entry for romcons.
2011-11-20 17:21:15 +00:00
b05caac801
Create romcons device node.
2011-11-20 17:18:34 +00:00
f6673607c2
Better wording.
2011-11-19 17:30:09 +00:00
a5b83a6434
grab major 203 for the iSCSI communications device (between kernel
...
driver and /sbin/iscsid)
2011-11-19 16:41:55 +00:00
ccfedeb2ca
Register directories for the new asm examples and their tests.
2011-11-12 01:19:40 +00:00
bbc5f4100a
The previous change made "nooutput -2" discard both stdout and
...
stderr, whereas it should discard only stderr. This commit
should fix that problem.
2011-11-08 19:36:30 +00:00
97355391d0
In the nooutput function, don't mess with file descritor 4
...
at the outer level; do it inside a subshell context so as not
to interfere with a different use of fd 4 by the caller.
This should fix PR 45590.
2011-11-08 19:11:19 +00:00
christos