NetBSD/alpha and NetBSD/sparc. This fixes PR#34751.
The problem most likely started to show in gcc4 and is caused by the use of
a casting to an uint32_t pointer that is later copied from using memcpy.
Gcc detects the copying of 4 bytes from an uint32_t pointer and decides to
just replace it with an aligned copy causing the trap.
Fix provided by Izumi Tsutsui and ok'd by Martin.
from Kentaro A. Kurahone, with minor adjustments by me.
the ack prediction part of the original patch was omitted because
it's a separate change. reviewed by Rui Paulo.
one or two segments on partial acks. even if sack_bytes_rxmt==0,
if we are in fast recovory with sack, snd_cwnd has somewhat special
meaning here. PR/34749.
The code to generate an ISS via an MD5 hash has been present in the
NetBSD kernel since 2001, but it wasn't even exported to userland at
that time. It was agreed on tech-net with the original author <thorpej>
that we should let the user decide if he wants to enable it or not.
Not enabled by default.
credentials on sockets, at least not anytime soon, this is a way to check
if we can "look" at a socket. Later on when (and if) we do have socket
credentials, the interface usage remains the same because we pass the
socket.
This also fixes sysctl for inet/inet6 pcblist.
happen in the TCP stack, this interface calls the specified callback to
handle the situation according to the currently selected congestion
control algorithm.
A new sysctl node was created: net.inet.tcp.congctl.{available,selected}
with obvious meanings.
The old net.inet.tcp.newreno MIB was removed.
The API is discussed in tcp_congctl(9).
In the near future, it will be possible to selected a congestion control
algorithm on a per-socket basis.
Discussed on tech-net and reviewed by <yamt>.
all callers of these functions are at splsoftnet already:
tcp_sack_option
tcp_input ok
tcp_del_sackholes
tcp_input ok
tcp_free_sackholes
tcp_close ok
tcp_timer_rexmt ok
tcp_timer_2msl ok
all callers of tcp_close are at splsoftnet already:
tcp_close
tcp_input ok
tcp_disconnect
tcp_usrreq ok
tcp_usrclosed
tcp_usrreq ok
tcp_disconnect
tcp_timer_2msl ok
tcp_drop
tcp_usrreq
tcp_disconnect
tcp_timer_rexmt ok
tcp_timer_persist ok
tcp_timer_keep ok
tcp_input
syn_cache_get
tcp_input
with spl used to protect other allocations and frees, or datastructure
element insertion and removal, in adjacent code.
It is almost unquestionably the case that some of the spl()/splx() calls
added here are superfluous, but it really seems wrong to see:
s=splfoo();
/* frob data structure */
splx(s);
pool_put(x);
and if we think we need to protect the first operation, then it is hard
to see why we should not think we need to protect the next. "Better
safe than sorry".
It is also almost unquestionably the case that I missed some pool
gets/puts from interrupt context with my strategy for finding these
calls; use of PR_NOWAIT is a strong hint that a pool may be used from
interrupt context but many callers in the kernel pass a "can wait/can't
wait" flag down such that my searches might not have found them. One
notable area that needs to be looked at is pf.
See also:
http://mail-index.netbsd.org/tech-kern/2006/07/19/0003.htmlhttp://mail-index.netbsd.org/tech-kern/2006/07/19/0009.html
to break free of the constraint if the range minimum boundary is larger than
the maximum boundary.
Discovered by jmg@FreeBSD.org. (See FreeBSD's tcp_timer.h rev 1.31).
- Add a few scopes to the kernel: system, network, and machdep.
- Add a few more actions/sub-actions (requests), and start using them as
opposed to the KAUTH_GENERIC_ISSUSER place-holders.
- Introduce a basic set of listeners that implement our "traditional"
security model, called "bsd44". This is the default (and only) model we
have at the moment.
- Update all relevant documentation.
- Add some code and docs to help folks who want to actually use this stuff:
* There's a sample overlay model, sitting on-top of "bsd44", for
fast experimenting with tweaking just a subset of an existing model.
This is pretty cool because it's *really* straightforward to do stuff
you had to use ugly hacks for until now...
* And of course, documentation describing how to do the above for quick
reference, including code samples.
All of these changes were tested for regressions using a Python-based
testsuite that will be (I hope) available soon via pkgsrc. Information
about the tests, and how to write new ones, can be found on:
http://kauth.linbsd.org/kauthwiki
NOTE FOR DEVELOPERS: *PLEASE* don't add any code that does any of the
following:
- Uses a KAUTH_GENERIC_ISSUSER kauth(9) request,
- Checks 'securelevel' directly,
- Checks a uid/gid directly.
(or if you feel you have to, contact me first)
This is still work in progress; It's far from being done, but now it'll
be a lot easier.
Relevant mailing list threads:
http://mail-index.netbsd.org/tech-security/2006/01/25/0011.htmlhttp://mail-index.netbsd.org/tech-security/2006/03/24/0001.htmlhttp://mail-index.netbsd.org/tech-security/2006/04/18/0000.htmlhttp://mail-index.netbsd.org/tech-security/2006/05/15/0000.htmlhttp://mail-index.netbsd.org/tech-security/2006/08/01/0000.htmlhttp://mail-index.netbsd.org/tech-security/2006/08/25/0000.html
Many thanks to YAMAMOTO Takashi, Matt Thomas, and Christos Zoulas for help
stablizing kauth(9).
Full credit for the regression tests, making sure these changes didn't break
anything, goes to Matt Fleming and Jaime Fournier.
Happy birthday Randi! :)
Both available for IPv4 and IPv6.
Basic implementation test results are available at
http://netbsd-soc.sourceforge.net/projects/ecn/testresults.html.
Work sponsored by the Google Summer of Code project 2006.
Special thanks to Kentaro Kurahone, Allen Briggs and Matt Thomas for their
help, comments and support during the project.
Fix MOBILE encapsulation. Add many debugging printfs (mainly
concerning UDP mode). Clean up the gre(4) code a bit. Add the
capability to setup UDP tunnels to ifconfig. Update documentation.
In UDP mode, gre(4) puts a GRE header onto transmitted packets,
and hands them to a UDP socket for transmission. That is, the
encapsulation looks like this: IP+UDP+GRE+encapsulated packet.
There are two ways to set up a UDP tunnel. One way is to tell the
source and destination IP+port to gre(4), and let gre(4) create
the socket. The other way to create a UDP tunnel is for userland
to "delegate" a UDP socket to the kernel.
sysctl(9) flags CTLFLAG_READONLY[12]. luckily they're not documented
so it's only half regression.
only two knobs used them; proc.curproc.corename (check added in the
existing handler; its CTLFLAG_ANYWRITE, yay) and net.inet.ip.forwsrcrt,
that got its own handler now too.
the data is read-only/shared and call m_pullup(). Otherwise,
extract a const pointer to the mbuf data.
XXX I should extract a new macro, M_WRITABLE(m, len), that is true
if m has len consecutive writable bytes at its front.
KNF slightly.
Use bpf_mtap_af().
the data is read-only/shared and call m_pullup(). Otherwise,
extract a const pointer to the mbuf data.
XXX I should extract a new macro, M_WRITABLE(m, len), that is true
if m has len consecutive writable bytes at its front.
the mbuf which supposed to get sent out:
- Complain in ip_output() if any of the IPv6 related flags are set.
- Complain in ip6_output() if any of the IPv4 related flags are set.
- Complain in both functions if the flags indicate that both a TCP and
UCP checksum should be calculated by the hardware.
This is needed because the pf code can call icmp_error with setting
this tag, but the new packet should not be filtered when it comes back
to pf(4).
ok christos@
- struct timeval time is gone
time.tv_sec -> time_second
- struct timeval mono_time is gone
mono_time.tv_sec -> time_uptime
- access to time via
{get,}{micro,nano,bin}time()
get* versions are fast but less precise
- support NTP nanokernel implementation (NTP API 4)
- further reading:
Timecounter Paper: http://phk.freebsd.dk/pubs/timecounter.pdf
NTP Nanokernel: http://www.eecis.udel.edu/~mills/ntp/html/kern.html
it has to change the mbuf chain. I experience hard hang on a Xen2 domU after
TCP connections have been closed, and a crash has been reported which may be
caused by this too.
that expect real addresses. explicitly KASSERT() that it is not
NULL in the kernel and just avoid using it userland.
(the kernel could be more defensive about this, but, until now it
would have just crashed anyway.)
* RFC 3542 isn't binary compatible with RFC 2292.
* RFC 2292 support is on by default but can be disabled.
* update ping6, telnet and traceroute6 to the new API.
From the KAME project (www.kame.net).
Reviewed by core.
RFC4191
- supports host-side router-preference
RFC3542
- if DAD fails on a interface, disables IPv6 operation on the
interface
- don't advertise MLD report before DAD finishes
Others
- fixes integer overflow for valid and preferred lifetimes
- improves timer granularity for MLD, using callout-timer.
- reflects rtadvd's IPv6 host variable information into kernel
(router only)
- adds a sysctl option to enable/disable pMTUd for multicast
packets
- performs NUD on PPP/GRE interface by default
- Redirect works regardless of ip6_accept_rtadv
- removes RFC1885-related code
From the KAME project via SUZUKI Shinsuke.
Reviewed by core.
- most of the kernel code will not care about the actual encoding of
scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
scoped addresses as a special case.
- scope boundary check will be stricter. For example, the current
*BSD code allows a packet with src=::1 and dst=(some global IPv6
address) to be sent outside of the node, if the application do:
s = socket(AF_INET6);
bind(s, "::1");
sendto(s, some_global_IPv6_addr);
This is clearly wrong, since ::1 is only meaningful within a single
node, but the current implementation of the *BSD kernel cannot
reject this attempt.
- and, while there, don't try to remove the ff02::/32 interface route
entry in in6_ifdetach() as it's already gone.
This also includes some level of support for the standard source
address selection algorithm defined in RFC3484, which will be
completed on in the future.
From the KAME project via JINMEI Tatuya.
Approved by core@.
could modify the struct mbuf and calling functions (udp_input() and
udp4_realinput()) would have used a garbled local copy of the pointer.
The fix is not perfect. udp4_espinudp() should use m_pulldown()...
pass it to in_pcbbind() so that can allocate a low numbered port
if setsockopt() has been used to set IP_PORTRANGE to IP_PORTRANGE_LOW.
While there, fail in_pcbconnect() if the in_pcbbind() fails - rather
than sending the request out from a port of zero.
This has been largely broken since the socket option was added in 1998.
the decapsulator dispatch changes in 2001. Problems found and fixed
by Christine Jones of BBN. Specifically:
Check for a packet's protocol to be ENCAP_PROTO, not AF_INET.
Remove one-back cache for last vif, because vif_encapcheck is called
for each vif, rather than being expected to find the appropriate vif.
The cache usage caused packets to be input on the wrong vif and hence
usually dropped.
In vif_encapcheck, verify the local source as well. While mrouted
endeavors not to create multiple tunnels with a peer, a packet
arriving with the wrong local address is still wrong and should not be
accepted. (This is a correctness nit, not a security issue.) Order
checks to fail quickly for packets being checked to see if they match
a vif other than the one they belong on (essentially, check peer
source address in outer header first).
Claim 69 bits of match (32 each from outer src/dst and 5 from checking
that inner dst is within 224/5). This should result in the vif having
a higher priority for multicast packets compared to a parallel gif(4)
tunnel, and that both seems appropriate if both are configured and
seems to match the semantics expected by the decapsulator dispatch
machinery.
(These changes were made in 2.99.15 and about a dozen nodes are
running them with many vifs. ip_mroute.c has not changed
significantly since then (February 2005) and the changes applied
cleanly to current and compile cleanly.)
http://www.gont.com.ar/drafts/icmp-attacks-against-tcp.html
1. Don't act on ICMP-need-frag immediately if adhoc checks on the
advertised MTU fail. The MTU update is delayed until a TCP retransmit
happens.
2. Ignore ICMP Source Quench messages meant for TCP connections.
From OpenBSD.
store a struct ifnet *, and define it for udp/tcp/rawip for INET and
INET6. When deleting a struct ifnet, invoke PRU_PURGEIF on all
protocols marked with PR_PURGEIF. Closes PR kern/29580 (mine).
The __UNCONST macro is now used only where necessary and the RW macros
are gone. Most of the changes here are consumers of the
sysctl_createv(9) interface that now takes a pair of const pointers
which used not to be.
"const struct mbuf *" to "struct mbuf *". Without this change the
actual implementation cannot even use m_copydata() on the mbuf chain
which is broken.
chgsbsize() as mentioned in the PR can be called from an interrupt context
via tcp_close(). Avoid calling uid_find() in chgsbsize().
- Instead of storing so_uid in struct socketvar, store *so_uidinfo
- Add a simple lock to struct uidinfo.
- for ipv4, defer decision to ip layer as h/w checksum offloading does
so that it can check the actual interface the packet is going to.
- for ipv6, disable it.
(maybe will be revisited when it implements h/w checksum offloading.)
ok'ed by Jason Thorpe.
- introduce t_segqlen, the number of segments in segq/timeq.
the name is from freebsd.
- rather than maintaining a copy of sack blocks (rcv_sack_block[]),
build it directly from the segment list when needed.
- Use the correct IP header length variable for other-than-first packets.
- Remove redundant setting of the original IP header length in the first
packet's csum_data. (It's already set before ip_fragment() is called
in 1.147.)
net.local.stream.pcblist
net.local.dgram.pcblist
net.inet.tcp.pcblist
net.inet.udp.pcblist
net.inet.raw.pcblist
net.inet6.tcp6.pcblist
net.inet6.udp6.pcblist
net.inet6.raw6.pcblist
which allow retrieval of the pcbs in use for those protocols. The
struct involved is 32/64 bit clean and incorporates parts of struct
inpcb, struct unpcb, a bit of struct tcpcb, and two socket addresses.
on gnats-bugs in PR kern/29544.
Tested with an NFS client using default rwsize on an NFS server
with wm(4) interface configured IP4CSUM,TCP4CSUM,UDP4CSUM.
Prior revision required the server to have checksum offload disabled.
it in the TCP stack to test which of the REXMT or PERSIST timer is in use.
This fixes a race condition that could cause "panic: tcp_output REXMT". See
tech-net for details.
http://www.sigusr1.org/~kurahone/tcp-sack-netbsd-02152005.diff.gz
Fixes in that patch for pre-existing TCP pcb initializations were already
committed to NetBSD-current, so are not included in this commit.
The SACK patch has been observed to correctly negotiate and respond,
to SACKs in wide-area traffic.
There are two indepenently-observed, as-yet-unresolved anomalies:
First, seeing unexplained delays between in fast retransmission
(potentially explainable by an 0.2sec RTT between adjacent
ethernet/wifi NICs); and second, peculiar and unepxlained TCP
retransmits observed over an ath0 card.
After discussion with several interested developers, I'm committing
this now, as-is, for more eyes to use and look over. Current hypothesis
is that the anomalies above may in fact be due to link/level (hardware,
driver, HAL, firmware) abberations in the test setup, affecting both
Kentaro's wired-Ethernet NIC and in my two (different) WiFi NICs.
headers and LKM.
Add MKPF; if set to no, don't build and install the pf(4) programs,
headers, LKM and spamd.
Both options default to yes, so nothing changed in the default build.
Reviewed by lukem.
checksum is always in the L4 header by the time we get to this point. It
was occasionally not there due to a bug in tcp_respond, which has since
been fixed.
So, instead just stash the length of the L3 header in the high 16 bits of
csum_data.
(from an offset to the end of the packet), the pseudo-header checksum must be
calculated by software. So, provide it in the TCP/UDP header when
M_CSUM_NO_PSEUDOHDR is set in the interface's if_csum_flags_tx.
The start offset, the end of the IP header, is also provided in the high 16
bits of pkthdr.csum_data. Such that the driver need not examine the packet
at all.
XXX At the request of Jonathan Stone, note that sharing of if_csum_flags_tx &
pkthdr.csum_flags for checksum quirks should be re-evaluated.
Hans Rosenfeld (rosenfeld at grumpf.hope-2000.org)
This change makes it possible to add gif interfaces to bridges, which
will then send and receive IP protocol 97 packets. Packets are Ethernet
frames with an EtherIP header prepended.
1) dupseg_fix_=true from NS: do not count a segment with completely duplicate
data as a duplicate ack. This can occur due to duplicate packets in the
network, or due to fast retransmit from the other side.
2) dupack_reset_=false from NS: do not reset the duplicate ack counter or exit
fast recovery if we happen to get data or a window update along with a
duplicate ack.
3) In the "very old ack" case that itojun added, send an ACK before dropping
the segment, to try to update the other side's send sequence number.
4) Check the ssthresh crossover point with >= rather than >. Otherwise we
start to do "exponential" growth immediately following recovery, where we
should be doing "linear". This is what NS does.
and it could detect even older time stamps. (Really, to be 100% correct, there
should be a timer that clears these out -- but it probably doesn't matter in
the real world.)
liamjfoy