a9155c5057
Set the status word as well, and remove a bogus comment.
1997-09-12 10:29:20 +00:00
982f24e698
Always initialize all registers in setregs().
1997-09-12 07:00:30 +00:00
16a8787248
Fix execve(2) and *setregs() interfaces so emulations can set registers in a
...
more correct way. (See tech-kern.)
1997-09-11 23:01:44 +00:00
bbf76eb63e
Implement pmap and va caching within C table managers to help speed
...
up PV->(pmap,va) operations.
1997-07-02 03:23:57 +00:00
552af779d2
bring mrg-vm-swap2 onto mainilne.
1997-06-12 15:46:19 +00:00
6cf26b26ae
s/_round_page/m68k_round_page/ s/_trunc_page/m68k_trunc_page/
...
s/_btop/m68k_btop/ s/_ptob/m68k_ptob/
1997-06-10 19:42:25 +00:00
6dbfc7764b
s/_round_page/m68k_round_page/
1997-06-10 19:37:58 +00:00
b1dc6a8603
s/_trunc_page/m68k_trunc_page/
1997-06-10 19:36:53 +00:00
a204fb7981
Initialize machine from MACHINE.
1997-06-08 23:54:19 +00:00
3f6f86d875
Undo changes which make pmap_xxxx_page() functions re-entrant; just block
...
all interrupts which might cause re-entrancy.
Allow virtual addresses which are not managed by the MI VM system to
participate in the PV system.
Remove a few frivoulous TLB cache flushes.
1997-05-30 07:02:14 +00:00
e512003d6e
Add non-inline version of _splraise.
1997-05-29 22:20:01 +00:00
1b2aae80c2
Added new lock system for the two virtual pages used in temporary mappings.
...
Allows pmap_zero_page() and pmap_copy_page() to be re-entrant.
1997-05-28 04:28:52 +00:00
b53e0d4fb7
Coded to work with new lock system for tmp_vpages.
1997-05-28 04:27:00 +00:00
0304ff6aed
Implement code to dynamically size the number of page tables based on available
...
RAM at boot.
Also did some cleanup of unused functions, updated several comments, and
removed unecessary 'XXX's.
1997-05-20 06:01:19 +00:00
a83cf310c1
The Hydra is 20 MHz and the Pegasus is 33 MHz.
1997-05-14 16:45:22 +00:00
5079510304
Make the "hydra" call leds_hydra() from clock_attach().
1997-05-14 16:42:45 +00:00
b209530013
Remove call to leds_init (it is already in obio_init).
1997-05-14 16:13:31 +00:00
1aa91b893d
Eliminate references to vmspace.vm_pmap
...
(also fix some comments).
1997-05-13 17:17:12 +00:00
3d8d0c485c
Add call to leds_init() after everything has started up ok.
1997-05-11 06:15:09 +00:00
3f7423a432
Wrap all label references with new macros in m68k/asm.h in preperation
...
for ELF switchover. (eventually)
1997-05-02 23:07:35 +00:00
24af362f60
Implement pmap_pa_exists() so that /dev/mem works.
...
This was the reason ps (kvm_getargs) did not work.
1997-05-01 15:00:11 +00:00
b9a0ca59bb
oops...
1997-05-01 14:58:20 +00:00
42f8cf900b
Use unsigned when doing copy/xor check.
1997-04-28 23:43:56 +00:00
cb96a536e4
Add a comment about obio_mapin().
1997-04-28 23:38:47 +00:00
1046c915b6
Drivers that use obio_mapin should enforce OBIO attachment
...
(just to be paranoid).
1997-04-28 23:30:19 +00:00
678f326c7f
Make idprom_init() figure out where the IDPROM resides.
...
Add autoconfig glue, which currently just shows the
address where the IDPROM was found.
1997-04-25 19:02:06 +00:00
4c64781365
Moved the actual model identification work into identifycpu(),
...
which used to be in _startup.c:_verify_hardware().
Use sunmon_abort() in cpu_reboot() for now...
1997-04-25 18:52:11 +00:00
9ae1b69554
Rename "Idle" to "_Idle" so clock.c can reference it.
1997-04-25 18:48:39 +00:00
25d7b6b348
Provide a struct representing only the clock.
1997-04-25 18:47:41 +00:00
885a1fc439
Add /dev/leds support.
1997-04-25 18:46:10 +00:00
2dd63e3378
Use bus_mapin, and minor tweaks.
1997-04-25 18:45:39 +00:00
f7749f47fe
Add "oclock" support for the Sun3/470.
1997-04-25 18:31:37 +00:00
8f9276c727
Move the _verify_hardware() work into machdep.c:identifycpu().
...
Call obio_init() after _vm_init() so we can use peek_byte() to
probe the idprom. Be quiet in _save_symtab() when all is well.
1997-04-25 18:29:58 +00:00
477a320277
Moved bus_scan() and bus_print() here from autoconf.c
...
because they are now different in sun3 vs sun3x.
1997-04-25 18:02:47 +00:00
3619a4da3d
Rename obio_alloc to obio_mapin, update *_init declarations.
...
Remove OBIO_P4_REG (not a fixed address, but per-device).
1997-04-25 18:00:49 +00:00
963c410824
Change the OBIO address probe order a little, to allow determination of
...
which kind of idprom and clock we have (3/80 vs 3/470 differences).
Fix a bug where obio_submatch() failed to copy some locators.
Rename obio_alloc to obio_mapin. Add lots of comments.
1997-04-25 15:35:27 +00:00
48fa8154e7
Adjust for <m68k/m68k/trap_subr.s>
1997-04-25 01:49:05 +00:00
f05b58b229
Use common m68k sigcode.
1997-04-13 02:37:15 +00:00
a2be180b39
Adjust for new kcore.h
1997-04-09 21:00:35 +00:00
00c04fe742
Use <m68k/m68k/proc_subr.s>
1997-04-09 20:58:33 +00:00
b7dd41d4e2
Location of printer port registers for 3/80 was off.
1997-04-09 04:42:25 +00:00
b5f838ad77
Add a comment.
1997-04-04 20:48:59 +00:00
68755b199e
Physical page status functions pmap_clear_reference()
...
and pmap_clear_modify() weren't testing if the page whose status was being
changed was being managed. This caused kernel panics with X11.
1997-04-01 02:15:33 +00:00
b572daa4dc
In-tree GNU ``as'' does not know of 'pmove <reg>,tt0' instruction. Changed
...
instances of this instruction to hardcoded opcode statements. Thanks to
jthorpe for pointing this out.
1997-03-31 02:22:25 +00:00
2268a2c7eb
Don't allocate mclrefcnt[]; it's dead and gone.
1997-03-27 21:01:52 +00:00
c29412f1bb
fix a warning
1997-03-26 23:27:12 +00:00
37b247edde
Renames: /dumpconf/cpu_dumpconf/, /boot/cpu_reboot/
1997-03-26 22:42:13 +00:00
90a79f75fe
Change continue to break in a few places (as suggested by mycroft).
1997-03-24 23:49:39 +00:00
7c0bd080c9
No longer force boothowto=RB_SINGLE|RB_KDB
...
(Yes, it goes multi-user just fine! 8^)
1997-03-24 17:57:12 +00:00
c874276d35
First cut at crashdump support.
1997-03-21 22:46:05 +00:00
mycroft