9e53e1415d
Add support for a read-only edid attribute that shows the result of
...
WSDISPLAYIO_GET_EDID.
Uses code from sys/dev/videomode to parse and print the edid data.
2021-12-25 13:54:13 +00:00
4a60ed0210
wsconsctl: revert adding LINTFLAGS
...
https://mail-index.netbsd.org/source-changes-d/2021/10/26/msg013482.html
https://mail-index.netbsd.org/source-changes-d/2021/10/26/msg013483.html
2021-10-26 17:33:18 +00:00
a59814ca67
wsconsctl: include correct header for lint
...
Running lint in non-tools mode picked up the header from the installed
system, not the one corresponding to the source code. The installed
header on NetBSD 9.99.88 does not define WSMOUSECFG_MAX yet.
2021-10-11 13:27:47 +00:00
d4e118e090
wsconsctl: allow the new "precision scrolling" variables to be configured
2021-09-28 06:20:09 +00:00
d9c815ad06
fail on error, not on success.
2021-09-22 14:15:29 +00:00
ad2d0017d3
Document keyboard mode ioctls and let wsconsctl manage it.
2020-09-13 07:35:15 +00:00
4a2e556972
Move description of keyboard layouts to wskbd.4, add newer layouts
...
Previously, the best reference was pckbd.4. This does not make much
sense to read if you are on, say, an evbarm device with only USB.
wsconsctl.8 contained a vaguer description of supported language names,
which isn't very useful because you can't pass full language names
to the command. Point readers to wskbd.4 instead.
Note in the wskbd.4 page that while all layouts are generally supported
by pckbd(4) and ukbd(4), older keyboard interfaces might only support
a subset.
2020-07-13 11:14:12 +00:00
d0c1a9d713
More keyboard layouts
2020-07-12 03:37:06 +00:00
71e18f4b60
When merging entries with the keyboard map, print only the resulting changes.
...
While here, replace bcopy with standad memcpy.
2018-11-23 06:31:57 +00:00
d01557a2c8
Added complete support for touchscreen calibration (see PR kern/45872).
...
Tested with the uts(4) driver, as well as with mice without calibration
support.
Reviewed by uwe@ (thank you!)
2012-12-24 01:29:20 +00:00
76cf3dff78
Added read-only support for touchscreen calibration (see PR kern/45872).
...
Tested with the uts(4) driver, as well as with mice without calibration
support.
Reviewed by uwe@ (thank you!)
2012-12-24 01:27:23 +00:00
0033dc95e8
Added a field type for signed integers. This is required when handling
...
touchscreen calibration values, which is about to be implemented in
wsconsctl (see PR kern/45872).
Reviewed by uwe@ (thank you!)
2012-12-24 01:20:12 +00:00
722882388a
allow non-command keysyms to be mapped as commands (experimental)
2012-10-23 15:30:45 +00:00
2b7d68ecf8
- remove obsolete = { syntac
...
- print context for yyerror()
- add a production to clarify a syntax error
2012-10-23 01:59:18 +00:00
cf7ed4c9cc
Convert to C89 function definitions
2012-03-20 18:50:30 +00:00
155b16958f
Fix typo.
2012-02-14 11:05:32 +00:00
01173747fc
Amiga wscons/Xorg support, first phase.
...
Implemented wscons for CV64 and CV64/3D. Other graphics cards drivers are
prepared for it, but will not be attempted before Xorg is not running.
The wscons support is disabled by default. A GENERIC kernel should behave
like always. Use WSCONS to try out a kernel with wscons support.
Done by rkujawa@ and phx@.
2011-12-15 14:25:12 +00:00
e837071dcc
Mark yyerror as static and dead.
2011-08-27 19:01:34 +00:00
77103d874a
input is unused
2011-05-24 12:07:14 +00:00
b915a641c8
update macro names to match new ones
...
(i don't know why they changed, just fixing the build)
2011-02-06 21:38:09 +00:00
c122e153ac
Allow standalone commands to be recognized, as in the in-kernel keymaps.
...
Also allow the Cmd token. Examples:
keycode 210 = Cmd Cmd_BrightnessUp
keycode 211 = Cmd_VolumeToggle
2010-11-30 12:22:06 +00:00
821d4396bd
follow KS_GROUP_Ascii->KS_GROUP_Plain rename in kernel,
...
noticed by Andreas Gustafsson
2010-01-29 09:49:34 +00:00
652adce2ab
add %option noyywrap
2009-10-28 19:43:56 +00:00
268e5bfd87
Mention a number of keyboard encodings.
...
From Jukka Ruohonen in PR kern/15955.
2009-06-09 19:46:32 +00:00
48680f64b2
fix sign-compare issues
2009-04-06 12:35:20 +00:00
10655c3e2a
PR/40059 - Bug Hunting -- add Xref to wscons.conf(5)
2008-11-29 05:52:32 +00:00
07103d0363
Pass SED=${TOOL_SED:Q} in the environment to scripts run during the build.
2008-10-26 14:55:17 +00:00
96230fab84
Use ${TOOL_AWK} instead of ${AWK} or plain "awk" in make commands.
...
Pass AWK=${TOOL_AWK:Q} to shell scripts that use awk.
2008-10-19 22:05:19 +00:00
79cfdc5aec
Clarify message that says the map isn't shown when -a is given.
...
Resolves PR 32436 from Igor Sobrado based on a suggestion by
Dieter Roelants, except I expanded the message further.
2008-08-25 00:14:46 +00:00
11a6dbe728
Convert TNF licenses to new 2 clause variant
2008-04-30 13:10:46 +00:00
ce099b4099
Remove clause 3 and 4 from TNF licenses
2008-04-28 20:22:51 +00:00
8b0f9554ff
convert __attribute__s to applicable cdefs.h macros
2007-12-15 19:44:37 +00:00
36c7456d7c
include sys/cdefs.h so that __attribute__ can be fixed later
2007-12-15 16:32:05 +00:00
27ae1373d5
Mention include proper file for keyboard defines; from Zafer.
2006-10-22 19:39:32 +00:00
b87585ec3c
Mark splash.enable and splash.progress write-only, there are no ioctls
...
to get the values.
2006-08-13 23:52:11 +00:00
a5c89047c0
Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@,
...
NetBSD Foundation Membership still pending.) This stack was written by
Iain under sponsorship from Itronix Inc.
The stack includes support for rfcomm networking (networking via your
bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets.
Drivers for both PCMCIA and USB bluetooth controllers are included.
2006-06-19 15:44:33 +00:00
8e45f8abca
Add the ability to control the splash screen.
...
wsconsctl -d -w splash.enable=<1|0> to toggle the splash screen, and
wsconsctl -d -w splash.progress=1 to update the splash animation
2006-02-18 19:35:11 +00:00
c799a9c4c0
Style fixes:
...
- Use EXIT_SUCCESS/EXIT_FAILURE where appropriate.
- Cut long lines.
- Properly indent continuation of lines.
- Sort includes.
- Replace u_int with unsigned int.
- Remove parenthesis around return values.
- Add blank line at the beginning of functions without local parameters.
- Cast *printf calls to void.
2006-02-05 18:11:46 +00:00
2df378f966
Fix two pastos in the code to set 'samplerate'.
2006-02-05 17:45:06 +00:00
8b589aee17
Add support to automatically repeat mouse button events in wsmouse(4) and
...
change wsconsctl(4) so that this is configurable.
This is specially useful for mice that provide page up/down buttons instead
of a real wheel and that do not send events repeatedly from the hardware.
(E.g.: Logitech Marble Mouse.)
No objections in tech-kern@.
2006-02-05 17:38:33 +00:00
a76a5aebb5
Fix typo. From YOMURA Masanori in private mail.
2005-09-11 23:50:46 +00:00
f3ce44eee2
Sort options. Various other fixes.
2005-07-24 21:07:52 +00:00
d49bebea61
Add examples for scroll.fastlines and scroll.slowlines.
...
Also, bump the man page date.
ok wiz@, hubertf@
2005-07-24 20:54:06 +00:00
6499bd69c1
constify.
2005-06-26 22:45:50 +00:00
86716480cb
appease gcc -Wuninitialized
2005-06-02 00:15:02 +00:00
83ee25f9d4
Show an example of turning off auto repeat.
2005-05-03 13:26:25 +00:00
f2944095c0
Fix a typo and add an s.
2005-05-03 11:57:11 +00:00
e0b1c109ad
Add an example for setting keyboard auto repeat rate.
2005-05-03 11:51:34 +00:00
8bdb487207
Do not use FLG_MODIFY to mark color settings. I thought this was used to
...
denote that a flag was readable/writeable, but that is achieved by passing
a 0 as the flags.
Thanks to uwe@ for finding this out and explaining me why it was wrong.
2005-04-30 16:38:21 +00:00
ecf40361a8
Change the default controlling devices to /dev/wskbd and /dev/wsmouse
...
(instead wskbd0 and wsmouse0), this way changes will affect all devices
instead of just the first one.
2005-04-29 16:51:33 +00:00
mlelstv