The change introduces a global generation counter that is incremented when any
routes have been added or deleted. When a rtcache caches a rtentry into itself,
it also stores a snapshot of the generation counter. If the snapshot equals to
the global counter, the cache is still valid, otherwise invalidated.
One drawback of the change is that all rtcaches of all protocol families are
invalidated when any routes of any protocol families are added or deleted.
If that matters, we should have separate generation counters based on
protocol families.
This change removes LIST_ENTRY from struct route, which fixes a part of
PR kern/52515.
In the MP-safe world, a rtentry stemming from a rtcache can be freed at any
points. So we need to protect rtentries somehow say by reference couting or
passive references. Regardless of the method, we need to call some release
function of a rtentry after using it.
The change adds a new function rtcache_unref to release a rtentry. At this
point, this function does nothing because for now we don't add a reference
to a rtentry when we get one from a rtcache. We will add something useful
in a further commit.
This change is a part of changes for MP-safe routing table. It is separated
to avoid one big change that makes difficult to debug by bisecting.
If a underlying network device driver supports MSI/MSI-X, RX interrupts
can be delivered to arbitrary CPUs. This means that Layer 2 subroutines
such as ether_input (softint) and subsequent Layer 3 subroutines (softint)
which are called via traditional netisr can be dispatched on an arbitrary
CPU. Layer 2 subroutines now run without any locks (expected) and so a
Layer 2 subroutine and a Layer 3 subroutine can run in parallel.
There is a shared data between a Layer 2 routine and a Layer 3 routine,
that is ifqueue and IF_ENQUEUE (from L2) and IF_DEQUEUE (from L3) on it
are racy now.
To fix the race condition, use ifqueue#ifq_lock to protect ifqueue
instead of splnet that is meaningless now.
The same race condition exists in route_intr. Fix it as well.
Reviewed by knakahara@
This change makes struct ifaddr and its variants (in_ifaddr and in6_ifaddr)
MP-safe by using pserialize and psref. At this moment, pserialize_perform
and psref_target_destroy are disabled because (1) we don't need them
because of softnet_lock (2) they cause a deadlock because of softnet_lock.
So we'll enable them when we remove softnet_lock in the future.
Having a pointer of an interface in a mbuf isn't safe if we remove big
kernel locks; an interface object (ifnet) can be destroyed anytime in any
packet processing and accessing such object via a pointer is racy. Instead
we have to get an object from the interface collection (ifindex2ifnet) via
an interface index (if_index) that is stored to a mbuf instead of an
pointer.
The change provides two APIs: m_{get,put}_rcvif_psref that use psref(9)
for sleep-able critical sections and m_{get,put}_rcvif that use
pserialize(9) for other critical sections. The change also adds another
API called m_get_rcvif_NOMPSAFE, that is NOT MP-safe and for transition
moratorium, i.e., it is intended to be used for places where are not
planned to be MP-ified soon.
The change adds some overhead due to psref to performance sensitive paths,
however the overhead is not serious, 2% down at worst.
Proposed on tech-kern and tech-net.
You can't use this unless you know what it is a priori: the formal
prototype is variadic, and the different instances (e.g., ip_output,
route_output) have different real prototypes.
Convert the only user of it, raw_send in net/raw_cb.c, to take an
explicit callback argument. Convert the only instances of it,
route_output and key_output, to such explicit callbacks for raw_send.
Use assertions to make sure the conversion to explicit callbacks is
warranted.
Discussed on tech-net with no objections:
https://mail-index.netbsd.org/tech-net/2016/01/16/msg005484.html
nam parameter type from buf * to sockaddr *.
final commit for parameter type changes to protocol user requests
* bump kernel version to 7.99.15 for parameter type changes to pr_{send,connect}
move m_len check into callers which results in small duplication of
code that will go away when the callers are converted to receive
sockaddr * instead of mbuf *.
pr_{accept,sockname,peername} nam parameter type from mbuf * to sockaddr *.
* retained use of mbuftypes[MT_SONAME] for now.
* bump to netbsd version 7.99.12 for parameter type change.
patch posted to tech-net@ 2015/04/19
* update protocol bind implementations to use/expect sockaddr *
instead of mbuf *
* introduce sockaddr_big struct for storage of addr data passed via
sys_bind; sockaddr_big is of sufficient size and alignment to
accommodate all addr data sizes received.
* modify sys_bind to allocate sockaddr_big instead of using an mbuf.
* bump kernel version to 7.99.9 for change to pr_bind() parameter type.
Patch posted to tech-net@
http://mail-index.netbsd.org/tech-net/2015/03/15/msg005004.html
The choice to use a new structure sockaddr_big has been retained since
changing sockaddr_storage size would lead to unnecessary ABI change. The
use of the new structure does not preclude future work that increases
the size of sockaddr_storage and at that time sockaddr_big may be
trivially replaced.
Tested by mrg@ and myself, discussed with rmind@, posted to tech-net@
switches and put into separate functions
- always KASSERT(solocked(so)) even if not implemented
(for PRU_CONNECT2 only)
- replace calls to pr_generic() with req = PRU_CONNECT2 with calls to
pr_connect2()
- replace calls to pr_generic() with req = PRU_PURGEIF with calls to
pr_purgeif()
put common code from unp_connect2() (used by unp_connect() into
unp_connect1() and call out to it when needed
patch only briefly reviewed by rmind@
separate functions
xxx_send(struct socket *, struct mbuf *, struct mbuf *,
struct mbuf *, struct lwp *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_SEND with calls to
pr_send()
rename existing functions that operate on PCB for consistency (and to
free up their names for xxx_send() PRUs
- l2cap_send() -> l2cap_send_pcb()
- sco_send() -> sco_send_pcb()
- rfcomm_send() -> rfcomm_send_pcb()
patch reviewed by rmind
pr_generic() usrreq switches and put into separate functions
xxx_disconnect(struct socket *)
xxx_shutdown(struct socket *)
xxx_abort(struct socket *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req =
PRU_{DISCONNECT,SHUTDOWN,ABORT}
with calls to pr_{disconnect,shutdown,abort}() respectively
rename existing internal functions used to implement above functionality
to permit use of the names for xxx_{disconnect,shutdown,abort}().
- {l2cap,sco,rfcomm}_disconnect() ->
{l2cap,sco,rfcomm}_disconnect_pcb()
- {unp,rip,tcp}_disconnect() -> {unp,rip,tcp}_disconnect1()
- unp_shutdown() -> unp_shutdown1()
patch reviewed by rmind
into seaparate functions
xxx_listen(struct socket *, struct mbuf *)
- always KASSERT(solocked(so)) and KASSERT(nam != NULL)
- replace calls to pr_generic() with req = PRU_CONNECT with
pr_connect()
- rename existin {l2cap,sco,rfcomm}_connect() to
{l2cap,sco,rfcomm}_connect_pcb() respectively to permit
naming consistency with other protocols functions.
- drop struct lwp * parameter from unp_connect() and at_pcbconnect()
and use curlwp instead where appropriate.
patch reviewed by rmind
switches and put into separate functions
xxx_bind(struct socket *, struct mbuf *)
xxx_listen(struct socket *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_BIND with call to
pr_bind()
- replace calls to pr_generic() with req = PRU_LISTEN with call to
pr_listen()
- drop struct lwp * parameter from at_pcbsetaddr(), in_pcbbind() and
unp_bind() and always use curlwp.
rename existing functions that operate on PCB for consistency (and to
free up their names for xxx_{bind,listen}() PRUs
- l2cap_{bind,listen}() -> l2cap_{bind,listen}_pcb()
- sco_{bind,listen}() -> sco_{bind,listen}_pcb()
- rfcomm_{bind,listen}() -> rfcomm_{bind,listen}_pcb()
patch reviewed by rmind
welcome to netbsd 6.99.48
switches and put into separate functions
xxx_sendoob(struct socket *, struct mbuf *, struct mbuf *)
xxx_recvoob(struct socket *, struct mbuf *, int)
- always KASSERT(solocked(so)) even if request is not implemented
- replace calls to pr_generic() with req = PRU_{SEND,RCV}OOB with
calls to pr_{send,recv}oob() respectively.
there is still some tweaking of m_freem(m) and m_freem(control) to come
for consistency. not performed with this commit for clarity.
reviewed by rmind
into a separate function xxx_accept(struct socket *, struct mbuf *)
note: future cleanup will take place to remove struct mbuf parameter
type and replace it with a more appropriate type.
patch reviewed by rmind
usrreq switches and put into separate functions
xxx_{peer,sock}addr(struct socket *, struct mbuf *).
- KASSERT(solocked(so)) always in new functions even if request
is not implemented
- KASSERT(pcb != NULL) and KASSERT(nam) if the request is
implemented and not for tcp.
* for tcp roll #ifdef KPROF and #ifdef DEBUG code from tcp_usrreq() into
easier to cut & paste functions tcp_debug_capture() and
tcp_debug_trace()
- functions provided by rmind
- remaining use of PRU_{PEER,SOCK}ADDR #define to be removed in a
future commit.
* rename netbt functions to permit consistency of pru function names
(as has been done with other requests already split out).
- l2cap_{peer,sock}addr() -> l2cap_{peer,sock}_addr_pcb()
- rfcomm_{peer,sock}addr() -> rfcomm_{peer,sock}_addr_pcb()
- sco_{peer,sock}addr() -> sco_{peer,sock}_addr_pcb()
* split/refactor do_sys_getsockname(lwp, fd, which, nam) into
two functions do_sys_get{peer,sock}name(fd, nam).
- move PRU_PEERADDR handling into do_sys_getpeername() from
do_sys_getsockname()
- have svr4_stream directly call do_sys_get{sock,peer}name()
respectively instead of providing `which' & fix a DPRINTF string
that incorrectly wrote "getpeername" when it meant "getsockname"
- fix sys_getpeername() and sys_getsockname() to call
do_sys_get{sock,peer}name() without `which' and `lwp' & adjust
comments
- bump kernel version for removal of lwp & which parameters from
do_sys_getsockname()
note: future cleanup to remove struct mbuf * abuse in
xxx_{peer,sock}name()
still to come, not done in this commit since it is easier to do post
split.
patch reviewed by rmind
welcome to 6.99.47
were not filling in struct stat.
decision made after further discussion with rmind and investigation of
how other operating systems behave. soo_stat() is doing just enough to
be able to call what gets returned valid and thus justifys a return of
success.
additional review will be done to determine of the pr_stat functions
that were already returning EOPNOTSUPP can be considered successful with
what soo_stat() is doing.
not fill in struct stat instead of returning success.
* in pr_stat remove all checks for non-NULL so->so_pcb except where the
pcb is actually used (i.e. cases where we don't return EOPNOTSUPP).
proposed on tech-net@
separate xxx_stat(struct socket *, struct stat *) functions.
* replace calls using pr_generic with req == PRU_SENSE with pr_stat().
further change will follow that cleans up the pattern used to extract the
pcb and test for its presence.
reviewed by rmind
abuse of pointer to struct mbuf type.
param2 changed to u_long type and uses parameter name 'cmd' (ioctl command)
param3 changed to void * type and uses parameter name 'data'
param4 changed to struct ifnet * and uses parameter name 'ifp'
param5 has been removed (formerly struct lwp *) and uses of 'l' have been
replaced with curlwp from curproc(9).
callers have had (now unnecessary) casts to struct mbuf * removed, called
code has had (now unnecessary) casts to u_long, void * and struct ifnet *
respectively removed.
reviewed by rmind@
`control' to `ifp' after split from xxx_usrreq().
sys_socket.c
fix wrapping of arguments to be consistent with other function calls
in the file after replacing pr_usrreq() call with pr_ioctl() which
required one less argument.
link_proto.c
fix indentation of parameters in link_ioctl() prototype to be
consistent with the rest of the file.
discussed with rmind@
into separate xxx_ioctl() functions.
* place KASSERT(req != PRU_CONTROL) inside xxx_userreq() as it is now
inappropriate for req = PRU_CONTROL in xxx_userreq().
* replace calls to pr_generic() with req = PRU_CONTROL with pr_ioctl().
* remove & fixup references to PRU_CONTROL xxx_userreq() function comments.
* fix various comments references for xxx_userreq() that mentioned
PRU_CONTROL as xxx_userreq() no longer handles the request.
a further change will follow to fix parameter and naming inconsistencies
retained from original code.
Reviewed by rmind@
maxv