OpenSSH 8.5 was released on 2021-03-03. It is available from the
mirrors listed at https://www.openssh.com/.
OpenSSH is a 100% complete SSH protocol 2.0 implementation and
includes sftp client and server support.
Once again, we would like to thank the OpenSSH community for their
continued support of the project, especially those who contributed
code or patches, reported bugs, tested snapshots or donated to the
project. More information on donations may be found at:
https://www.openssh.com/donations.html
Future deprecation notice
=========================
It is now possible[1] to perform chosen-prefix attacks against the
SHA-1 algorithm for less than USD$50K.
In the SSH protocol, the "ssh-rsa" signature scheme uses the SHA-1
hash algorithm in conjunction with the RSA public key algorithm.
OpenSSH will disable this signature scheme by default in the near
future.
Note that the deactivation of "ssh-rsa" signatures does not necessarily
require cessation of use for RSA keys. In the SSH protocol, keys may be
capable of signing using multiple algorithms. In particular, "ssh-rsa"
keys are capable of signing using "rsa-sha2-256" (RSA/SHA256),
"rsa-sha2-512" (RSA/SHA512) and "ssh-rsa" (RSA/SHA1). Only the last of
these is being turned off by default.
This algorithm is unfortunately still used widely despite the
existence of better alternatives, being the only remaining public key
signature algorithm specified by the original SSH RFCs that is still
enabled by default.
The better alternatives include:
* The RFC8332 RSA SHA-2 signature algorithms rsa-sha2-256/512. These
algorithms have the advantage of using the same key type as
"ssh-rsa" but use the safe SHA-2 hash algorithms. These have been
supported since OpenSSH 7.2 and are already used by default if the
client and server support them.
* The RFC8709 ssh-ed25519 signature algorithm. It has been supported
in OpenSSH since release 6.5.
* The RFC5656 ECDSA algorithms: ecdsa-sha2-nistp256/384/521. These
have been supported by OpenSSH since release 5.7.
To check whether a server is using the weak ssh-rsa public key
algorithm, for host authentication, try to connect to it after
removing the ssh-rsa algorithm from ssh(1)'s allowed list:
ssh -oHostKeyAlgorithms=-ssh-rsa user@host
If the host key verification fails and no other supported host key
types are available, the server software on that host should be
upgraded.
This release enables the UpdateHostKeys option by default to assist
the client by automatically migrating to better algorithms.
[1] "SHA-1 is a Shambles: First Chosen-Prefix Collision on SHA-1 and
Application to the PGP Web of Trust" Leurent, G and Peyrin, T
(2020) https://eprint.iacr.org/2020/014.pdf
Security
========
* ssh-agent(1): fixed a double-free memory corruption that was
introduced in OpenSSH 8.2 . We treat all such memory faults as
potentially exploitable. This bug could be reached by an attacker
with access to the agent socket.
On modern operating systems where the OS can provide information
about the user identity connected to a socket, OpenSSH ssh-agent
and sshd limit agent socket access only to the originating user
and root. Additional mitigation may be afforded by the system's
malloc(3)/free(3) implementation, if it detects double-free
conditions.
The most likely scenario for exploitation is a user forwarding an
agent either to an account shared with a malicious user or to a
host with an attacker holding root access.
* Portable sshd(8): Prevent excessively long username going to PAM.
This is a mitigation for a buffer overflow in Solaris' PAM username
handling (CVE-2020-14871), and is only enabled for Sun-derived PAM
implementations. This is not a problem in sshd itself, it only
prevents sshd from being used as a vector to attack Solaris' PAM.
It does not prevent the bug in PAM from being exploited via some
other PAM application. GHPR212
Potentially-incompatible changes
================================
This release includes a number of changes that may affect existing
configurations:
* ssh(1), sshd(8): this release changes the first-preference signature
algorithm from ECDSA to ED25519.
* ssh(1), sshd(8): set the TOS/DSCP specified in the configuration
for interactive use prior to TCP connect. The connection phase of
the SSH session is time-sensitive and often explicitly interactive.
The ultimate interactive/bulk TOS/DSCP will be set after
authentication completes.
* ssh(1), sshd(8): remove the pre-standardization cipher
rijndael-cbc@lysator.liu.se. It is an alias for aes256-cbc before
it was standardized in RFC4253 (2006), has been deprecated and
disabled by default since OpenSSH 7.2 (2016) and was only briefly
documented in ssh.1 in 2001.
* ssh(1), sshd(8): update/replace the experimental post-quantum
hybrid key exchange method based on Streamlined NTRU Prime coupled
with X25519.
The previous sntrup4591761x25519-sha512@tinyssh.org method is
replaced with sntrup761x25519-sha512@openssh.com. Per its
designers, the sntrup4591761 algorithm was superseded almost two
years ago by sntrup761.
(note this both the updated method and the one that it replaced are
disabled by default)
* ssh(1): disable CheckHostIP by default. It provides insignificant
benefits while making key rotation significantly more difficult,
especially for hosts behind IP-based load-balancers.
Changes since OpenSSH 8.4
=========================
New features
------------
* ssh(1): this release enables UpdateHostkeys by default subject to
some conservative preconditions:
- The key was matched in the UserKnownHostsFile (and not in the
GlobalKnownHostsFile).
- The same key does not exist under another name.
- A certificate host key is not in use.
- known_hosts contains no matching wildcard hostname pattern.
- VerifyHostKeyDNS is not enabled.
- The default UserKnownHostsFile is in use.
We expect some of these conditions will be modified or relaxed in
future.
* ssh(1), sshd(8): add a new LogVerbose configuration directive for
that allows forcing maximum debug logging by file/function/line
pattern-lists.
* ssh(1): when prompting the user to accept a new hostkey, display
any other host names/addresses already associated with the key.
* ssh(1): allow UserKnownHostsFile=none to indicate that no
known_hosts file should be used to identify host keys.
* ssh(1): add a ssh_config KnownHostsCommand option that allows the
client to obtain known_hosts data from a command in addition to
the usual files.
* ssh(1): add a ssh_config PermitRemoteOpen option that allows the
client to restrict the destination when RemoteForward is used
with SOCKS.
* ssh(1): for FIDO keys, if a signature operation fails with a
"incorrect PIN" reason and no PIN was initially requested from the
user, then request a PIN and retry the operation. This supports
some biometric devices that fall back to requiring PIN when reading
of the biometric failed, and devices that require PINs for all
hosted credentials.
* sshd(8): implement client address-based rate-limiting via new
sshd_config(5) PerSourceMaxStartups and PerSourceNetBlockSize
directives that provide more fine-grained control on a per-origin
address basis than the global MaxStartups limit.
Bugfixes
--------
* ssh(1): Prefix keyboard interactive prompts with "(user@host)" to
make it easier to determine which connection they are associated
with in cases like scp -3, ProxyJump, etc. bz#3224
* sshd(8): fix sshd_config SetEnv directives located inside Match
blocks. GHPR201
* ssh(1): when requesting a FIDO token touch on stderr, inform the
user once the touch has been recorded.
* ssh(1): prevent integer overflow when ridiculously large
ConnectTimeout values are specified, capping the effective value
(for most platforms) at 24 days. bz#3229
* ssh(1): consider the ECDSA key subtype when ordering host key
algorithms in the client.
* ssh(1), sshd(8): rename the PubkeyAcceptedKeyTypes keyword to
PubkeyAcceptedAlgorithms. The previous name incorrectly suggested
that it control allowed key algorithms, when this option actually
specifies the signature algorithms that are accepted. The previous
name remains available as an alias. bz#3253
* ssh(1), sshd(8): similarly, rename HostbasedKeyTypes (ssh) and
HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms.
* sftp-server(8): add missing lsetstat@openssh.com documentation
and advertisement in the server's SSH2_FXP_VERSION hello packet.
* ssh(1), sshd(8): more strictly enforce KEX state-machine by
banning packet types once they are received. Fixes memleak caused
by duplicate SSH2_MSG_KEX_DH_GEX_REQUEST (oss-fuzz #30078).
* sftp(1): allow the full range of UIDs/GIDs for chown/chgrp on 32bit
platforms instead of being limited by LONG_MAX. bz#3206
* Minor man page fixes (capitalization, commas, etc.) bz#3223
* sftp(1): when doing an sftp recursive upload or download of a
read-only directory, ensure that the directory is created with
write and execute permissions in the interim so that the transfer
can actually complete, then set the directory permission as the
final step. bz#3222
* ssh-keygen(1): document the -Z, check the validity of its argument
earlier and provide a better error message if it's not correct.
bz#2879
* ssh(1): ignore comments at the end of config lines in ssh_config,
similar to what we already do for sshd_config. bz#2320
* sshd_config(5): mention that DisableForwarding is valid in a
sshd_config Match block. bz3239
* sftp(1): fix incorrect sorting of "ls -ltr" under some
circumstances. bz3248.
* ssh(1), sshd(8): fix potential integer truncation of (unlikely)
timeout values. bz#3250
* ssh(1): make hostbased authentication send the signature algorithm
in its SSH2_MSG_USERAUTH_REQUEST packets instead of the key type.
This make HostbasedAcceptedAlgorithms do what it is supposed to -
filter on signature algorithm and not key type.
Portability
-----------
* sshd(8): add a number of platform-specific syscalls to the Linux
seccomp-bpf sandbox. bz#3232 bz#3260
* sshd(8): remove debug message from sigchld handler that could cause
deadlock on some platforms. bz#3259
* Sync contrib/ssh-copy-id with upstream.
* unittests: add a hostname function for systems that don't have it.
Some systems don't have a hostname command (it's not required by
POSIX). The do have uname -n (which is), but not all of those have
it report the FQDN.
Checksums:
==========
- SHA1 (openssh-8.5.tar.gz) = 04cae43c389fb411227c01219e4eb46e3113f34e
- SHA256 (openssh-8.5.tar.gz) = 5qB2CgzNG4io4DmChTjHgCWqRWvEOvCKJskLdJCz+SU=
- SHA1 (openssh-8.5p1.tar.gz) = 72eadcbe313b07b1dd3b693e41d3cd56d354e24e
- SHA256 (openssh-8.5p1.tar.gz) = 9S8/QdQpqpkY44zyAK8iXM3Y5m8FLaVyhwyJc3ZG7CU=
Please note that the SHA256 signatures are base64 encoded and not
hexadecimal (which is the default for most checksum tools). The PGP
key used to sign the releases is available from the mirror sites:
https://cdn.openbsd.org/pub/OpenBSD/OpenSSH/RELEASE_KEY.asc
Please note that the OpenPGP key used to sign releases has been
rotated for this release. The new key has been signed by the previous
key to provide continuity.
Reporting Bugs:
===============
- Please read https://www.openssh.com/report.html
Security bugs should be reported directly to openssh@openssh.com
Security
========
This release contains mitigation for a weakness in the scp(1) tool
and protocol (CVE-2019-6111): when copying files from a remote system
to a local directory, scp(1) did not verify that the filenames that
the server sent matched those requested by the client. This could
allow a hostile server to create or clobber unexpected local files
with attacker-controlled content.
This release adds client-side checking that the filenames sent from
the server match the command-line request,
The scp protocol is outdated, inflexible and not readily fixed. We
recommend the use of more modern protocols like sftp and rsync for
file transfer instead.
Potentially-incompatible changes
================================
This release includes a number of changes that may affect existing
configurations:
* scp(1): Relating to the above changes to scp(1); the scp protocol
relies on the remote shell for wildcard expansion, so there is no
infallible way for the client's wildcard matching to perfectly
reflect the server's. If there is a difference between client and
server wildcard expansion, the client may refuse files from the
server. For this reason, we have provided a new "-T" flag to scp
that disables these client-side checks at the risk of
reintroducing the attack described above.
* sshd(8): Remove support for obsolete "host/port" syntax. Slash-
separated host/port was added in 2001 as an alternative to
host:port syntax for the benefit of IPv6 users. These days there
are establised standards for this like [::1]:22 and the slash
syntax is easily mistaken for CIDR notation, which OpenSSH
supports for some things. Remove the slash notation from
ListenAddress and PermitOpen; bz#2335
Changes since OpenSSH 7.9
=========================
This release is focused on new features and internal refactoring.
New Features
------------
* ssh(1), ssh-agent(1), ssh-add(1): Add support for ECDSA keys in
PKCS#11 tokens.
* ssh(1), sshd(8): Add experimental quantum-computing resistant
key exchange method, based on a combination of Streamlined NTRU
Prime 4591^761 and X25519.
* ssh-keygen(1): Increase the default RSA key size to 3072 bits,
following NIST Special Publication 800-57's guidance for a
128-bit equivalent symmetric security level.
* ssh(1): Allow "PKCS11Provider=none" to override later instances of
the PKCS11Provider directive in ssh_config; bz#2974
* sshd(8): Add a log message for situations where a connection is
dropped for attempting to run a command but a sshd_config
ForceCommand=internal-sftp restriction is in effect; bz#2960
* ssh(1): When prompting whether to record a new host key, accept
the key fingerprint as a synonym for "yes". This allows the user
to paste a fingerprint obtained out of band at the prompt and
have the client do the comparison for you.
* ssh-keygen(1): When signing multiple certificates on a single
command-line invocation, allow automatically incrementing the
certificate serial number.
* scp(1), sftp(1): Accept -J option as an alias to ProxyJump on
the scp and sftp command-lines.
* ssh-agent(1), ssh-pkcs11-helper(8), ssh-add(1): Accept "-v"
command-line flags to increase the verbosity of output; pass
verbose flags though to subprocesses, such as ssh-pkcs11-helper
started from ssh-agent.
* ssh-add(1): Add a "-T" option to allowing testing whether keys in
an agent are usable by performing a signature and a verification.
* sftp-server(8): Add a "lsetstat@openssh.com" protocol extension
that replicates the functionality of the existing SSH2_FXP_SETSTAT
operation but does not follow symlinks. bz#2067
* sftp(1): Add "-h" flag to chown/chgrp/chmod commands to request
they do not follow symlinks.
* sshd(8): Expose $SSH_CONNECTION in the PAM environment. This makes
the connection 4-tuple available to PAM modules that wish to use
it in decision-making. bz#2741
* sshd(8): Add a ssh_config "Match final" predicate Matches in same
pass as "Match canonical" but doesn't require hostname
canonicalisation be enabled. bz#2906
* sftp(1): Support a prefix of '@' to suppress echo of sftp batch
commands; bz#2926
* ssh-keygen(1): When printing certificate contents using
"ssh-keygen -Lf /path/certificate", include the algorithm that
the CA used to sign the cert.
Bugfixes
--------
* sshd(8): Fix authentication failures when sshd_config contains
"AuthenticationMethods any" inside a Match block that overrides
a more restrictive default.
* sshd(8): Avoid sending duplicate keepalives when ClientAliveCount
is enabled.
* sshd(8): Fix two race conditions related to SIGHUP daemon restart.
Remnant file descriptors in recently-forked child processes could
block the parent sshd's attempt to listen(2) to the configured
addresses. Also, the restarting parent sshd could exit before any
child processes that were awaiting their re-execution state had
completed reading it, leaving them in a fallback path.
* ssh(1): Fix stdout potentially being redirected to /dev/null when
ProxyCommand=- was in use.
* sshd(8): Avoid sending SIGPIPE to child processes if they attempt
to write to stderr after their parent processes have exited;
bz#2071
* ssh(1): Fix bad interaction between the ssh_config ConnectTimeout
and ConnectionAttempts directives - connection attempts after the
first were ignoring the requested timeout; bz#2918
* ssh-keyscan(1): Return a non-zero exit status if no keys were
found; bz#2903
* scp(1): Sanitize scp filenames to allow UTF-8 characters without
terminal control sequences; bz#2434
* sshd(8): Fix confusion between ClientAliveInterval and time-based
RekeyLimit that could cause connections to be incorrectly closed.
bz#2757
* ssh(1), ssh-add(1): Correct some bugs in PKCS#11 token PIN
handling at initial token login. The attempt to read the PIN
could be skipped in some cases, particularly on devices with
integrated PIN readers. This would lead to an inability to
retrieve keys from these tokens. bz#2652
* ssh(1), ssh-add(1): Support keys on PKCS#11 tokens that set the
CKA_ALWAYS_AUTHENTICATE flag by requring a fresh login after the
C_SignInit operation. bz#2638
* ssh(1): Improve documentation for ProxyJump/-J, clarifying that
local configuration does not apply to jump hosts.
* ssh-keygen(1): Clarify manual - ssh-keygen -e only writes
public keys, not private.
* ssh(1), sshd(8): be more strict in processing protocol banners,
allowing \r characters only immediately before \n.
* Various: fix a number of memory leaks, including bz#2942 and
bz#2938
* scp(1), sftp(1): fix calculation of initial bandwidth limits.
Account for bytes written before the timer starts and adjust the
schedule on which recalculations are performed. Avoids an initial
burst of traffic and yields more accurate bandwidth limits;
bz#2927
* sshd(8): Only consider the ext-info-c extension during the initial
key eschange. It shouldn't be sent in subsequent ones, but if it
is present we should ignore it. This prevents sshd from sending a
SSH_MSG_EXT_INFO for REKEX for buggy these clients. bz#2929
* ssh-keygen(1): Clarify manual that ssh-keygen -F (find host in
authorized_keys) and -R (remove host from authorized_keys) options
may accept either a bare hostname or a [hostname]:port combo.
bz#2935
* ssh(1): Don't attempt to connect to empty SSH_AUTH_SOCK; bz#2936
* sshd(8): Silence error messages when sshd fails to load some of
the default host keys. Failure to load an explicitly-configured
hostkey is still an error, and failure to load any host key is
still fatal. pr/103
* ssh(1): Redirect stderr of ProxyCommands to /dev/null when ssh is
started with ControlPersist; prevents random ProxyCommand output
from interfering with session output.
* ssh(1): The ssh client was keeping a redundant ssh-agent socket
(leftover from authentication) around for the life of the
connection; bz#2912
* sshd(8): Fix bug in HostbasedAcceptedKeyTypes and
PubkeyAcceptedKeyTypes options. If only RSA-SHA2 siganture types
were specified, then authentication would always fail for RSA keys
as the monitor checks only the base key (not the signature
algorithm) type against *AcceptedKeyTypes. bz#2746
* ssh(1): Request correct signature types from ssh-agent when
certificate keys and RSA-SHA2 signatures are in use.
Portability
-----------
* sshd(8): On Cygwin, run as SYSTEM where possible, using S4U for
token creation if it supports MsV1_0 S4U Logon.
* sshd(8): On Cygwin, use custom user/group matching code that
respects the OS' behaviour of case-insensitive matching.
* sshd(8): Don't set $MAIL if UsePAM=yes as PAM typically specifies
the user environment if it's enabled; bz#2937
* sshd(8) Cygwin: Change service name to cygsshd to avoid collision
with Microsoft's OpenSSH port.
* Allow building against OpenSSL -dev (3.x)
* Fix a number of build problems against version configurations and
versions of OpenSSL. Including bz#2931 and bz#2921
* Improve warnings in cygwin service setup. bz#2922
* Remove hardcoded service name in cygwin setup. bz#2922
================================
This release includes a number of changes that may affect existing
configurations:
* ssh(1): delete SSH protocol version 1 support, associated
configuration options and documentation.
* ssh(1)/sshd(8): remove support for the hmac-ripemd160 MAC.
* ssh(1)/sshd(8): remove support for the arcfour, blowfish and CAST
ciphers.
* Refuse RSA keys <1024 bits in length and improve reporting for keys
that do not meet this requirement.
* ssh(1): do not offer CBC ciphers by default.
Changes since OpenSSH 7.5
=========================
This is primarily a bugfix release. It also contains substantial
internal refactoring.
Security
--------
* sftp-server(8): in read-only mode, sftp-server was incorrectly
permitting creation of zero-length files. Reported by Michal
Zalewski.
New Features
------------
* ssh(1): add RemoteCommand option to specify a command in the ssh
config file instead of giving it on the client's command line. This
allows the configuration file to specify the command that will be
executed on the remote host.
* sshd(8): add ExposeAuthInfo option that enables writing details of
the authentication methods used (including public keys where
applicable) to a file that is exposed via a $SSH_USER_AUTH
environment variable in the subsequent session.
* ssh(1): add support for reverse dynamic forwarding. In this mode,
ssh will act as a SOCKS4/5 proxy and forward connections
to destinations requested by the remote SOCKS client. This mode
is requested using extended syntax for the -R and RemoteForward
options and, because it is implemented solely at the client,
does not require the server be updated to be supported.
* sshd(8): allow LogLevel directive in sshd_config Match blocks;
bz#2717
* ssh-keygen(1): allow inclusion of arbitrary string or flag
certificate extensions and critical options.
* ssh-keygen(1): allow ssh-keygen to use a key held in ssh-agent as
a CA when signing certificates. bz#2377
* ssh(1)/sshd(8): allow IPQoS=none in ssh/sshd to not set an explicit
ToS/DSCP value and just use the operating system default.
* ssh-add(1): added -q option to make ssh-add quiet on success.
* ssh(1): expand the StrictHostKeyChecking option with two new
settings. The first "accept-new" will automatically accept
hitherto-unseen keys but will refuse connections for changed or
invalid hostkeys. This is a safer subset of the current behaviour
of StrictHostKeyChecking=no. The second setting "off", is a synonym
for the current behaviour of StrictHostKeyChecking=no: accept new
host keys, and continue connection for hosts with incorrect
hostkeys. A future release will change the meaning of
StrictHostKeyChecking=no to the behaviour of "accept-new". bz#2400
* ssh(1): add SyslogFacility option to ssh(1) matching the equivalent
option in sshd(8). bz#2705
Bugfixes
--------
* ssh(1): use HostKeyAlias if specified instead of hostname for
matching host certificate principal names; bz#2728
* sftp(1): implement sorting for globbed ls; bz#2649
* ssh(1): add a user@host prefix to client's "Permission denied"
messages, useful in particular when using "stacked" connections
(e.g. ssh -J) where it's not clear which host is denying. bz#2720
* ssh(1): accept unknown EXT_INFO extension values that contain \0
characters. These are legal, but would previously cause fatal
connection errors if received.
* ssh(1)/sshd(8): repair compression statistics printed at
connection exit
* sftp(1): print '?' instead of incorrect link count (that the
protocol doesn't provide) for remote listings. bz#2710
* ssh(1): return failure rather than fatal() for more cases during
session multiplexing negotiations. Causes the session to fall back
to a non-mux connection if they occur. bz#2707
* ssh(1): mention that the server may send debug messages to explain
public key authentication problems under some circumstances; bz#2709
* Translate OpenSSL error codes to better report incorrect passphrase
errors when loading private keys; bz#2699
* sshd(8): adjust compatibility patterns for WinSCP to correctly
identify versions that implement only the legacy DH group exchange
scheme. bz#2748
* ssh(1): print the "Killed by signal 1" message only at LogLevel
verbose so that it is not shown at the default level; prevents it
from appearing during ssh -J and equivalent ProxyCommand configs.
bz#1906, bz#2744
* ssh-keygen(1): when generating all hostkeys (ssh-keygen -A), clobber
existing keys if they exist but are zero length. zero-length keys
could previously be made if ssh-keygen failed or was interrupted part
way through generating them. bz#2561
* ssh(1): fix pledge(2) violation in the escape sequence "~&" used to
place the current session in the background.
* ssh-keyscan(1): avoid double-close() on file descriptors; bz#2734
* sshd(8): avoid reliance on shared use of pointers shared between
monitor and child sshd processes. bz#2704
* sshd_config(8): document available AuthenticationMethods; bz#2453
* ssh(1): avoid truncation in some login prompts; bz#2768
* sshd(8): Fix various compilations failures, inc bz#2767
* ssh(1): make "--" before the hostname terminate argument processing
after the hostname too.
* ssh-keygen(1): switch from aes256-cbc to aes256-ctr for encrypting
new-style private keys. Fixes problems related to private key
handling for no-OpenSSL builds. bz#2754
* ssh(1): warn and do not attempt to use keys when the public and
private halves do not match. bz#2737
* sftp(1): don't print verbose error message when ssh disconnects
from under sftp. bz#2750
* sshd(8): fix keepalive scheduling problem: activity on a forwarded
port from preventing the keepalive from being sent; bz#2756
* sshd(8): when started without root privileges, don't require the
privilege separation user or path to exist. Makes running the
regression tests easier without touching the filesystem.
* Make integrity.sh regression tests more robust against timeouts.
bz#2658
* ssh(1)/sshd(8): correctness fix for channels implementation: accept
channel IDs greater than 0x7FFFFFFF.
Portability
-----------
* sshd(9): drop two more privileges in the Solaris sandbox:
PRIV_DAX_ACCESS and PRIV_SYS_IB_INFO; bz#2723
* sshd(8): expose list of completed authentication methods to PAM
via the SSH_AUTH_INFO_0 PAM environment variable. bz#2408
* ssh(1)/sshd(8): fix several problems in the tun/tap forwarding code,
mostly to do with host/network byte order confusion. bz#2735
* Add --with-cflags-after and --with-ldflags-after configure flags to
allow setting CFLAGS/LDFLAGS after configure has completed. These
are useful for setting sanitiser/fuzzing options that may interfere
with configure's operation.
* sshd(8): avoid Linux seccomp violations on ppc64le over the
socketcall syscall.
* Fix use of ldns when using ldns-config; bz#2697
* configure: set cache variables when cross-compiling. The cross-
compiling fallback message was saying it assumed the test passed,
but it wasn't actually set the cache variables and this would
cause later tests to fail.
* Add clang libFuzzer harnesses for public key parsing and signature
verification.
mirrors listed at http://www.openssh.com/ shortly.
OpenSSH is a 100% complete SSH protocol 2.0 implementation and
includes sftp client and server support. OpenSSH also includes
transitional support for the legacy SSH 1.3 and 1.5 protocols
that may be enabled at compile-time.
Once again, we would like to thank the OpenSSH community for their
continued support of the project, especially those who contributed
code or patches, reported bugs, tested snapshots or donated to the
project. More information on donations may be found at:
http://www.openssh.com/donations.html
Future deprecation notice
=========================
We plan on retiring more legacy cryptography in future releases,
specifically:
* In the next major release (expected June-August), removing remaining
support for the SSH v.1 protocol (currently client-only and compile-
time disabled).
* In the same release, removing support for Blowfish and RC4 ciphers
and the RIPE-MD160 HMAC. (These are currently run-time disabled).
* In the same release, removing the remaining CBC ciphers from being
offered by default in the client (These have not been offered in
sshd by default for several years).
* Refusing all RSA keys smaller than 1024 bits (the current minimum
is 768 bits)
This list reflects our current intentions, but please check the final
release notes for future releases.
Potentially-incompatible changes
================================
This release includes a number of changes that may affect existing
configurations:
* This release deprecates the sshd_config UsePrivilegeSeparation
option, thereby making privilege separation mandatory. Privilege
separation has been on by default for almost 15 years and
sandboxing has been on by default for almost the last five.
* The format of several log messages emitted by the packet code has
changed to include additional information about the user and
their authentication state. Software that monitors ssh/sshd logs
may need to account for these changes. For example:
Connection closed by user x 1.1.1.1 port 1234 [preauth]
Connection closed by authenticating user x 10.1.1.1 port 1234 [preauth]
Connection closed by invalid user x 1.1.1.1 port 1234 [preauth]
Affected messages include connection closure, timeout, remote
disconnection, negotiation failure and some other fatal messages
generated by the packet code.
* [Portable OpenSSH only] This version removes support for building
against OpenSSL versions prior to 1.0.1. OpenSSL stopped supporting
versions prior to 1.0.1 over 12 months ago (i.e. they no longer
receive fixes for security bugs).
=========================
This is a major release, containing a number of new features as
well as a large internal re-factoring.
Potentially-incompatible changes
--------------------------------
* sshd(8): UseDNS now defaults to 'no'. Configurations that match
against the client host name (via sshd_config or authorized_keys)
may need to re-enable it or convert to matching against addresses.
New Features
------------
* Much of OpenSSH's internal code has been re-factored to be more
library-like. These changes are mostly not user-visible, but
have greatly improved OpenSSH's testability and internal layout.
* Add FingerprintHash option to ssh(1) and sshd(8), and equivalent
command-line flags to the other tools to control algorithm used
for key fingerprints. The default changes from MD5 to SHA256 and
format from hex to base64.
Fingerprints now have the hash algorithm prepended. An example of
the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE
Please note that visual host keys will also be different.
* ssh(1), sshd(8): Experimental host key rotation support. Add a
protocol extension for a server to inform a client of all its
available host keys after authentication has completed. The client
may record the keys in known_hosts, allowing it to upgrade to better
host key algorithms and a server to gracefully rotate its keys.
The client side of this is controlled by a UpdateHostkeys config
option (default off).
* ssh(1): Add a ssh_config HostbasedKeyType option to control which
host public key types are tried during host-based authentication.
* ssh(1), sshd(8): fix connection-killing host key mismatch errors
when sshd offers multiple ECDSA keys of different lengths.
* ssh(1): when host name canonicalisation is enabled, try to
parse host names as addresses before looking them up for
canonicalisation. fixes bz#2074 and avoiding needless DNS
lookups in some cases.
* ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer
require OpenSSH to be compiled with OpenSSL support.
* ssh(1), ssh-keysign(8): Make ed25519 keys work for host based
authentication.
* sshd(8): SSH protocol v.1 workaround for the Meyer, et al,
Bleichenbacher Side Channel Attack. Fake up a bignum key before
RSA decryption.
* sshd(8): Remember which public keys have been used for
authentication and refuse to accept previously-used keys.
This allows AuthenticationMethods=publickey,publickey to require
that users authenticate using two _different_ public keys.
* sshd(8): add sshd_config HostbasedAcceptedKeyTypes and
PubkeyAcceptedKeyTypes options to allow sshd to control what
public key types will be accepted. Currently defaults to all.
* sshd(8): Don't count partial authentication success as a failure
against MaxAuthTries.
* ssh(1): Add RevokedHostKeys option for the client to allow
text-file or KRL-based revocation of host keys.
* ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by
serial number or key ID without scoping to a particular CA.
* ssh(1): Add a "Match canonical" criteria that allows ssh_config
Match blocks to trigger only in the second config pass.
* ssh(1): Add a -G option to ssh that causes it to parse its
configuration and dump the result to stdout, similar to "sshd -T".
* ssh(1): Allow Match criteria to be negated. E.g. "Match !host".
* The regression test suite has been extended to cover more OpenSSH
features. The unit tests have been expanded and now cover key
exchange.
Bugfixes
* ssh-keyscan(1): ssh-keyscan has been made much more robust again
servers that hang or violate the SSH protocol.
* ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were
being lost as comment fields.
* ssh(1): Allow ssh_config Port options set in the second config
parse phase to be applied (they were being ignored). bz#2286
* ssh(1): Tweak config re-parsing with host canonicalisation - make
the second pass through the config files always run when host name
canonicalisation is enabled (and not whenever the host name
changes) bz#2267
* ssh(1): Fix passing of wildcard forward bind addresses when
connection multiplexing is in use; bz#2324;
* ssh-keygen(1): Fix broken private key conversion from non-OpenSSH
formats; bz#2345.
* ssh-keygen(1): Fix KRL generation bug when multiple CAs are in
use.
* Various fixes to manual pages: bz#2288, bz#2316, bz#2273
Portable OpenSSH
* Support --without-openssl at configure time
Disables and removes dependency on OpenSSL. Many features,
including SSH protocol 1 are not supported and the set of crypto
options is greatly restricted. This will only work on systems
with native arc4random or /dev/urandom.
Considered highly experimental for now.
* Support --without-ssh1 option at configure time
Allows disabling support for SSH protocol 1.
* sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296
* Allow custom service name for sshd on Cygwin. Permits the use of
multiple sshd running with different service names.
Checksums:
==========
- SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37
- SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw=
- SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92
- SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4=
Please note that the PGP key used to sign releases was recently rotated.
The new key has been signed by the old key to provide continuity. It is
available from the mirror sites as RELEASE_KEY.asc.
Reporting Bugs:
===============
- Please read http://www.openssh.com/report.html
Security bugs should be reported directly to openssh@openssh.com
OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt,
Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and
Ben Lindstrom.
=========================
Potentially-incompatible changes
* sshd(8): The default set of ciphers and MACs has been altered to
remove unsafe algorithms. In particular, CBC ciphers and arcfour*
are disabled by default.
The full set of algorithms remains available if configured
explicitly via the Ciphers and MACs sshd_config options.
* sshd(8): Support for tcpwrappers/libwrap has been removed.
* OpenSSH 6.5 and 6.6 have a bug that causes ~0.2% of connections
using the curve25519-sha256@libssh.org KEX exchange method to fail
when connecting with something that implements the specification
correctly. OpenSSH 6.7 disables this KEX method when speaking to
one of the affected versions.
New Features
* Major internal refactoring to begin to make part of OpenSSH usable
as a library. So far the wire parsing, key handling and KRL code
has been refactored. Please note that we do not consider the API
stable yet, nor do we offer the library in separable form.
* ssh(1), sshd(8): Add support for Unix domain socket forwarding.
A remote TCP port may be forwarded to a local Unix domain socket
and vice versa or both ends may be a Unix domain socket.
* ssh(1), ssh-keygen(1): Add support for SSHFP DNS records for
ED25519 key types.
* sftp(1): Allow resumption of interrupted uploads.
* ssh(1): When rekeying, skip file/DNS lookups of the hostkey if it
is the same as the one sent during initial key exchange; bz#2154
* sshd(8): Allow explicit ::1 and 127.0.0.1 forwarding bind
addresses when GatewayPorts=no; allows client to choose address
family; bz#2222
* sshd(8): Add a sshd_config PermitUserRC option to control whether
~/.ssh/rc is executed, mirroring the no-user-rc authorized_keys
option; bz#2160
* ssh(1): Add a %C escape sequence for LocalCommand and ControlPath
that expands to a unique identifer based on a hash of the tuple of
(local host, remote user, hostname, port). Helps avoid exceeding
miserly pathname limits for Unix domain sockets in multiplexing
control paths; bz#2220
* sshd(8): Make the "Too many authentication failures" message
include the user, source address, port and protocol in a format
similar to the authentication success / failure messages; bz#2199
* Added unit and fuzz tests for refactored code. These are run
automatically in portable OpenSSH via the "make tests" target.
Bugfixes
* sshd(8): Fix remote forwarding with the same listen port but
different listen address.
* ssh(1): Fix inverted test that caused PKCS#11 keys that were
explicitly listed in ssh_config or on the commandline not to be
preferred.
* ssh-keygen(1): Fix bug in KRL generation: multiple consecutive
revoked certificate serial number ranges could be serialised to an
invalid format. Readers of a broken KRL caused by this bug will
fail closed, so no should-have-been-revoked key will be accepted.
* ssh(1): Reflect stdio-forward ("ssh -W host:port ...") failures in
exit status. Previously we were always returning 0; bz#2255
* ssh(1), ssh-keygen(1): Make Ed25519 keys' title fit properly in the
randomart border; bz#2247
* ssh-agent(1): Only cleanup agent socket in the main agent process
and not in any subprocesses it may have started (e.g. forked
askpass). Fixes agent sockets being zapped when askpass processes
fatal(); bz#2236
* ssh-add(1): Make stdout line-buffered; saves partial output getting
lost when ssh-add fatal()s part-way through (e.g. when listing keys
from an agent that supports key types that ssh-add doesn't);
bz#2234
* ssh-keygen(1): When hashing or removing hosts, don't choke on
@revoked markers and don't remove @cert-authority markers; bz#2241
* ssh(1): Don't fatal when hostname canonicalisation fails and a
ProxyCommand is in use; continue and allow the ProxyCommand to
connect anyway (e.g. to a host with a name outside the DNS behind
a bastion)
* scp(1): When copying local->remote fails during read, don't send
uninitialised heap to the remote end.
* sftp(1): Fix fatal "el_insertstr failed" errors when tab-completing
filenames with a single quote char somewhere in the string;
bz#2238
* ssh-keyscan(1): Scan for Ed25519 keys by default.
* ssh(1): When using VerifyHostKeyDNS with a DNSSEC resolver, down-
convert any certificate keys to plain keys and attempt SSHFP
resolution. Prevents a server from skipping SSHFP lookup and
forcing a new-hostkey dialog by offering only certificate keys.
* sshd(8): Avoid crash at exit via NULL pointer reference; bz#2225
* Fix some strict-alignment errors.
Portable OpenSSH
* Portable OpenSSH now supports building against libressl-portable.
* Portable OpenSSH now requires openssl 0.9.8f or greater. Older
versions are no longer supported.
* In the OpenSSL version check, allow fix version upgrades (but not
downgrades. Debian bug #748150.
* sshd(8): On Cygwin, determine privilege separation user at runtime,
since it may need to be a domain account.
* sshd(8): Don't attempt to use vhangup on Linux. It doesn't work for
non-root users, and for them it just messes up the tty settings.
* Use CLOCK_BOOTTIME in preference to CLOCK_MONOTONIC when it is
available. It considers time spent suspended, thereby ensuring
timeouts (e.g. for expiring agent keys) fire correctly. bz#2228
* Add support for ed25519 to opensshd.init init script.
* sftp-server(8): On platforms that support it, use prctl() to
prevent sftp-server from accessing /proc/self/{mem,maps}
Changes since OpenSSH 6.5
=========================
This is primarily a bugfix release.
Security:
* sshd(8): when using environment passing with a sshd_config(5)
AcceptEnv pattern with a wildcard. OpenSSH prior to 6.6 could be
tricked into accepting any enviornment variable that contains the
characters before the wildcard character.
New / changed features:
* ssh(1), sshd(8): this release removes the J-PAKE authentication code.
This code was experimental, never enabled and had been unmaintained
for some time.
* ssh(1): when processing Match blocks, skip 'exec' clauses other clauses
predicates failed to match.
* ssh(1): if hostname canonicalisation is enabled and results in the
destination hostname being changed, then re-parse ssh_config(5) files
using the new destination hostname. This gives 'Host' and 'Match'
directives that use the expanded hostname a chance to be applied.
Bugfixes:
* ssh(1): avoid spurious "getsockname failed: Bad file descriptor" in
ssh -W. bz#2200, debian#738692
* sshd(8): allow the shutdown(2) syscall in seccomp-bpf and systrace
sandbox modes, as it is reachable if the connection is terminated
during the pre-auth phase.
* ssh(1), sshd(8): fix unsigned overflow that in SSH protocol 1 bignum
parsing. Minimum key length checks render this bug unexploitable to
compromise SSH 1 sessions.
* sshd_config(5): clarify behaviour of a keyword that appears in
multiple matching Match blocks. bz#2184
* ssh(1): avoid unnecessary hostname lookups when canonicalisation is
disabled. bz#2205
* sshd(8): avoid sandbox violation crashes in GSSAPI code by caching
the supported list of GSSAPI mechanism OIDs before entering the
sandbox. bz#2107
* ssh(1): fix possible crashes in SOCKS4 parsing caused by assumption
that the SOCKS username is nul-terminated.
* ssh(1): fix regression for UsePrivilegedPort=yes when BindAddress is
not specified.
* ssh(1), sshd(8): fix memory leak in ECDSA signature verification.
* ssh(1): fix matching of 'Host' directives in ssh_config(5) files
to be case-insensitive again (regression in 6.5).
Portable OpenSSH:
* sshd(8): don't fatal if the FreeBSD Capsicum is offered by the
system headers and libc but is not supported by the kernel.
* Fix build using the HP-UX compiler.
Changes since OpenSSH 6.4
=========================
This is a feature-focused release.
New features:
* ssh(1), sshd(8): Add support for key exchange using elliptic-curve
Diffie Hellman in Daniel Bernstein's Curve25519. This key exchange
method is the default when both the client and server support it.
* ssh(1), sshd(8): Add support for Ed25519 as a public key type.
Ed25519 is a elliptic curve signature scheme that offers
better security than ECDSA and DSA and good performance. It may be
used for both user and host keys.
* Add a new private key format that uses a bcrypt KDF to better
protect keys at rest. This format is used unconditionally for
Ed25519 keys, but may be requested when generating or saving
existing keys of other types via the -o ssh-keygen(1) option.
We intend to make the new format the default in the near future.
Details of the new format are in the PROTOCOL.key file.
* ssh(1), sshd(8): Add a new transport cipher
"chacha20-poly1305@openssh.com" that combines Daniel Bernstein's
ChaCha20 stream cipher and Poly1305 MAC to build an authenticated
encryption mode. Details are in the PROTOCOL.chacha20poly1305 file.
* ssh(1), sshd(8): Refuse RSA keys from old proprietary clients and
servers that use the obsolete RSA+MD5 signature scheme. It will
still be possible to connect with these clients/servers but only
DSA keys will be accepted, and OpenSSH will refuse connection
entirely in a future release.
* ssh(1), sshd(8): Refuse old proprietary clients and servers that
use a weaker key exchange hash calculation.
* ssh(1): Increase the size of the Diffie-Hellman groups requested
for each symmetric key size. New values from NIST Special
Publication 800-57 with the upper limit specified by RFC4419.
* ssh(1), ssh-agent(1): Support PKCS#11 tokens that only provide
X.509 certs instead of raw public keys (requested as bz#1908).
* ssh(1): Add a ssh_config(5) "Match" keyword that allows
conditional configuration to be applied by matching on hostname,
user and result of arbitrary commands.
* ssh(1): Add support for client-side hostname canonicalisation
using a set of DNS suffixes and rules in ssh_config(5). This
allows unqualified names to be canonicalised to fully-qualified
domain names to eliminate ambiguity when looking up keys in
known_hosts or checking host certificate names.
* sftp-server(8): Add the ability to whitelist and/or blacklist sftp
protocol requests by name.
* sftp-server(8): Add a sftp "fsync@openssh.com" to support calling
fsync(2) on an open file handle.
* sshd(8): Add a ssh_config(5) PermitTTY to disallow TTY allocation,
mirroring the longstanding no-pty authorized_keys option.
* ssh(1): Add a ssh_config ProxyUseFDPass option that supports the
use of ProxyCommands that establish a connection and then pass a
connected file descriptor back to ssh(1). This allows the
ProxyCommand to exit rather than staying around to transfer data.
Bugfixes:
* ssh(1), sshd(8): Fix potential stack exhaustion caused by nested
certificates.
* ssh(1): bz#1211: make BindAddress work with UsePrivilegedPort.
* sftp(1): bz#2137: fix the progress meter for resumed transfer.
* ssh-add(1): bz#2187: do not request smartcard PIN when removing
keys from ssh-agent.
* sshd(8): bz#2139: fix re-exec fallback when original sshd binary
cannot be executed.
* ssh-keygen(1): Make relative-specified certificate expiry times
relative to current time and not the validity start time.
* sshd(8): bz#2161: fix AuthorizedKeysCommand inside a Match block.
* sftp(1): bz#2129: symlinking a file would incorrectly canonicalise
the target path.
* ssh-agent(1): bz#2175: fix a use-after-free in the PKCS#11 agent
helper executable.
* sshd(8): Improve logging of sessions to include the user name,
remote host and port, the session type (shell, command, etc.) and
allocated TTY (if any).
* sshd(8): bz#1297: tell the client (via a debug message) when
their preferred listen address has been overridden by the
server's GatewayPorts setting.
* sshd(8): bz#2162: include report port in bad protocol banner
message.
* sftp(1): bz#2163: fix memory leak in error path in do_readdir().
* sftp(1): bz#2171: don't leak file descriptor on error.
* sshd(8): Include the local address and port in "Connection from
..." message (only shown at loglevel>=verbose).
Portable OpenSSH:
* Please note that this is the last version of Portable OpenSSH that
will support versions of OpenSSL prior to 0.9.6. Support (i.e.
SSH_OLD_EVP) will be removed following the 6.5p1 release.
* Portable OpenSSH will attempt compile and link as a Position
Independent Executable on Linux, OS X and OpenBSD on recent gcc-
like compilers. Other platforms and older/other compilers may
request this using the --with-pie configure flag.
* A number of other toolchain-related hardening options are used
automatically if available, including -ftrapv to abort on signed
integer overflow and options to write-protect dynamic linking
information. The use of these options may be disabled using the
--without-hardening configure flag.
* If the toolchain supports it, one of the -fstack-protector-strong,
-fstack-protector-all or -fstack-protector compilation flag are
used to add guards to mitigate attacks based on stack overflows.
The use of these options may be disabled using the
--without-stackprotect configure option.
* sshd(8): Add support for pre-authentication sandboxing using the
Capsicum API introduced in FreeBSD 10.
* Switch to a ChaCha20-based arc4random() PRNG for platforms that do
not provide their own.
* sshd(8): bz#2156: restore Linux oom_adj setting when handling
SIGHUP to maintain behaviour over retart.
* sshd(8): bz#2032: use local username in krb5_kuserok check rather
than full client name which may be of form user@REALM.
* ssh(1), sshd(8): Test for both the presence of ECC NID numbers in
OpenSSL and that they actually work. Fedora (at least) has
NID_secp521r1 that doesn't work.
* bz#2173: use pkg-config --libs to include correct -L location for
libedit.
christos