Add (bare bone) installation instructions.

distrib/notes/Makefile

@@ -1,4 +1,4 @@
-#	$NetBSD: Makefile,v 1.28 2002/06/16 00:38:33 wiz Exp $
+#	$NetBSD: Makefile,v 1.29 2002/06/17 20:32:21 augustss Exp $
 #
 
 TARGETS+=	release
@@ -30,6 +30,7 @@ SUBDIR+= newsmips
 SUBDIR+= next68k
 SUBDIR+= pc532
 SUBDIR+= pmax
+SUBDIR+= pmppc
 SUBDIR+= sandpoint
 SUBDIR+= sgimips
 SUBDIR+= shark

distrib/notes/pmppc/Makefile

@@ -0,0 +1,5 @@
+#	$NetBSD: Makefile,v 1.1 2002/06/17 20:32:22 augustss Exp $
+
+MERGED_SRCS+=${.CURDIR}/../common/sysinst ${.CURDIR}/../common/upgrade
+
+.include <bsd.man.mk>

distrib/notes/pmppc/hardware

@@ -0,0 +1,149 @@
+.\"$NetBSD: hardware,v 1.1 2002/06/17 20:32:23 augustss Exp $
+.
+Currently,
+.Nx*M
+requires the use of Motorola's
+.Tn "DINK32"
+ROM to load over a serial port.  This means that there is no
+way to boot from a local disk or PCI device.
+.
+.Ss2 Supported processor cards
+.(bullet -offset indent
+Unity X4 with MPC8240
+.It
+Altimus X3 with either MPC755 or MPC7410
+.bullet)
+.Pp
+Other PMCs should work, but may need minor adjustments or more
+substantial work to support additional functionality.
+.
+.Ss2 Supported devices
+.(bullet -offset indent
+Ethernet
+.(bullet -compact
+Asante Mac 10/100 PCI Rev A, part number 09-00169-01
+.Pq Em de
+.It
+Farallon Fast EtherTX 10/100, part number PN996L-TX
+.Pq Em de
+.It
+SMC Etherpower II (9432TX)
+.Pq Em epic
+.It
+SMC 83c170
+.Pq Em epic
+.It
+3Com 3c905
+.Pq Em ex
+.It
+Intel EtherExpress PRO/10+ PCI LAN Adapter
+.Pq Em fxp
+.It
+RealTek 8029 Ethernet
+.Pq Em ne
+.It
+VIA Technologies VT86C926
+.Pq Em ne
+.It
+D-Link DFE-530TX+
+.Pq Em rtk
+.It
+RealTek 8139
+.Pq Em rtk
+.It
+Netgear FA-311
+.Pq Em sip
+.It
+Lite-On PNIC
+.Pq Em tlp
+.It
+D-Link DFE-530TX
+.Pq Em vr
+.It
+Many other PCI Ethernet interfaces, such as
+Tulip-compatible
+.Pq Em de No and Em tlp ,
+3Com
+.Pq Em ep ,
+SMC
+.Pq Em epic ,
+Intel
+.Pq Em fxp ,
+NE2000-compatible
+.Pq Em ne ,
+and RealTek
+.Pq Em rtk
+.bullet)
+.It
+SCSI
+.(bullet -compact
+Adaptec PCI controllers 291x, 2920, 2930C, 294x, 295x, 39xx, 19160, 29160
+and AIC-78xx
+.Pq Em ahc
+.It
+AdvanSys ABP-940UW[68], ABP-970UW[68], ASB3940UW-00 SCSI host adapters
+.Pq Em adw
+.It
+AdvanSys 1200[A,B], 9xx[U,UA] SCSI controller
+.Pq Em adv
+.It
+AMD 53c974
+.Pq Em pcscp
+.It
+DPT SmartCache/SmartRAID
+.Pq Em dpt
+.It
+NCR/Symbios 53C8xx
+.Pq Em siop No or Em esiop
+.It
+Many other PCI SCSI controllers should work, but no one has tried them
+.It
+Most SCSI disk/tape/CD-ROM devices should work
+.bullet)
+.It
+IDE
+.(bullet -compact
+Promise Ultra66
+.Pq Em pciide
+.It
+Some other PCI IDE controllers should work, although no one has had much success
+.It
+Most IDE disk/CD-ROM/ATAPI devices should work
+.bullet)
+.It
+Audio
+.(bullet -compact
+PCI audio cards, although none have been tested.
+.bullet)
+.It
+Serial ports
+.(bullet -compact
+On-board serial ports (the modem and printer ports)
+.Pq Em com0 No and Em com1
+.It
+Some PCI serial ports should work, but no one has tried them
+.bullet)
+.It
+PCI cards
+.(bullet -compact
+Most MI PCI cards should work, although very few have been tested with
+.Nx*M
+.Lk http://www.netbsd.org/Hardware/pci.html
+.bullet)
+.bullet)
+.
+.Ss2 Unsupported devices
+.(bullet -offset indent
+Built-in PS/2 keyboard & mouse
+.It
+Built-in parallel
+.It
+Built-in floppy
+.It
+Built-in IDE
+.bullet)
+.
+.Ss2 Supported boot devices and media
+.
+Currently, the only way to boot the system is with the DINK32 ROM
+monitor's serial download or a JTAG device.

distrib/notes/pmppc/install

@@ -0,0 +1,12 @@
+.\"	$NetBSD: install,v 1.1 2002/06/17 20:32:24 augustss Exp $
+.
+.\"	.Ss2 Booting the installer
+.\"	.
+.\"	.
+.\"	.Ss2 Example of a normal boot
+.\"	.
+.\"	.
+.\"	.Ss2 Common Problems and Error Messages
+.\"	.
+.\"	.
+.so ../common/sysinst

distrib/notes/pmppc/legal

@@ -0,0 +1,2 @@
+.\"	$NetBSD: legal,v 1.1 2002/06/17 20:32:25 augustss Exp $
+.

distrib/notes/pmppc/prep

@@ -0,0 +1,2 @@
+.\"	$NetBSD: prep,v 1.1 2002/06/17 20:32:26 augustss Exp $
+.

distrib/notes/pmppc/upgrade

@@ -0,0 +1,3 @@
+.\"	$NetBSD: upgrade,v 1.1 2002/06/17 20:32:27 augustss Exp $
+.
+.so ../common/upgrade

distrib/notes/pmppc/whatis

@@ -0,0 +1,2 @@
+.\"	$NetBSD: whatis,v 1.1 2002/06/17 20:32:28 augustss Exp $
+.

distrib/notes/pmppc/xfer

@@ -0,0 +1,3 @@
+.\"	$NetBSD: xfer,v 1.1 2002/06/17 20:32:29 augustss Exp $
+.
+.so ../common/xfer