Sync up with changes in GENERIC

This commit is contained in:
gwr 1997-03-11 21:21:49 +00:00
parent b4de41ef34
commit f64034e8f6
6 changed files with 145 additions and 177 deletions

View File

@ -1,8 +1,8 @@
# $NetBSD: DISKLESS,v 1.17 1997/01/31 02:08:19 thorpej Exp $ # $NetBSD: DISKLESS,v 1.18 1997/03/11 21:21:49 gwr Exp $
# #
# DISKLESS Sun3 (3/50, 3/60, 3/110, 3/160, 3/260) # DISKLESS Sun3 (3/50, 3/60, 3/110, 3/160, 3/260)
# Root and swap on NFS (no choice) # Root and swap on NFS
# Includes devices needed to run as an X-terminal # Includes devices needed to run as an X-terminal
# #
@ -16,13 +16,14 @@ options HAVECACHE # Sun3/260 VAC
maxusers 4 maxusers 4
# Standard system options # Standard system options
options KTRACE # system call tracing support options KTRACE # system call tracing support
# Debugging options. Uncomment either this: # Debugging options. Uncomment either this:
#options DDB #options DDB
# ... or these two: (for KGDB on another machine) # ... or these for KGDB (gdb remote target)
makeoptions DEBUG="-g" # symbols for kgdb + nm makeoptions DEBUG="-g" # debugging symbols for gdb
options KGDB options KGDB
options KGDBDEV=0x0C01
# Filesystem options # Filesystem options
file-system NFS # nfs client support file-system NFS # nfs client support
@ -37,7 +38,7 @@ options FIFO # FIFOs; RECOMMENDED
options INET # IP prototol stack support options INET # IP prototol stack support
#options GATEWAY # IP packet forwarding #options GATEWAY # IP packet forwarding
options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
# XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...) # XXX - Work-around for root on slow servers (insurance...)
options NFS_BOOT_RWSIZE=1024 options NFS_BOOT_RWSIZE=1024
# Compatability options # Compatability options
@ -71,11 +72,11 @@ ms0 at zsc0 channel 1 # mouse
# #
# Intel Ethernet (onboard, or VME) # Intel Ethernet (onboard, or VME)
ie0 at obio0 addr ? level ? ie0 at obio0 addr 0x0C0000 level 3
ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75 ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75
# Lance Ethernet (only onboard) # Lance Ethernet (only onboard)
le0 at obio0 addr ? level ? le0 at obio0 addr 0x120000 level 3
# #
# Frame buffer devices # Frame buffer devices
@ -109,5 +110,7 @@ cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8
# Misc. # Misc.
pseudo-device loop 1 # network loopback pseudo-device loop 1 # network loopback
pseudo-device sl 2 # CSLIP
pseudo-device ppp 2 # PPP
pseudo-device pty 32 # pseudo-terminals pseudo-device pty 32 # pseudo-terminals

View File

@ -1,4 +1,4 @@
# $NetBSD: FOUR_TTYS,v 1.8 1997/02/10 23:34:38 gwr Exp $ # $NetBSD: FOUR_TTYS,v 1.9 1997/03/11 21:21:51 gwr Exp $
# #
# FOUR_TTYS Sun3 (3/50, 3/60, 3/110, 3/160, 3/260) # FOUR_TTYS Sun3 (3/50, 3/60, 3/110, 3/160, 3/260)
@ -42,7 +42,7 @@ options FIFO # FIFOs; RECOMMENDED
options INET # IP prototol stack support options INET # IP prototol stack support
#options GATEWAY # IP packet forwarding #options GATEWAY # IP packet forwarding
options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
# XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...) # XXX - Work-around for root on slow servers (insurance...)
options NFS_BOOT_RWSIZE=1024 options NFS_BOOT_RWSIZE=1024
# Compatability options # Compatability options
@ -54,7 +54,7 @@ options COMPAT_12 # NetBSD 1.2
options UCONSOLE # Allow non-root TIOCCONS options UCONSOLE # Allow non-root TIOCCONS
# Sun3-specific debugging options # Sun3-specific debugging options
options PMAP_DEBUG #options PMAP_DEBUG
#options VMFAULT_TRACE #options VMFAULT_TRACE
#options SYSCALL_DEBUG #options SYSCALL_DEBUG
#options EXEC_DEBUG #options EXEC_DEBUG
@ -93,29 +93,27 @@ le0 at obio0 addr 0x120000 level 3
# #
# Sun3 "si" SCSI controller (NCR 5380) # Sun3 "si" SCSI controller (NCR 5380)
# This driver has several flags which may be enabled by OR'ing
# the values and using the "flags" directive. (PR#1929)
# Valid flags are:
#
# 0x01 Use DMA (may be polled)
# 0x02 Use DMA completion interrupts
# 0x04 Allow disconnect/reselect
#
# E.g. "flags 0x07" would enable DMA, interrupts, and reselect.
# Note: these values are quite a bit paranoid...
si0 at obio0 addr 0x140000 level 2 si0 at obio0 addr 0x140000 level 2
si0 at vmes0 addr 0xff200000 level 2 vect 0x40 si0 at vmes0 addr 0xff200000 level 2 vect 0x40
si1 at vmes0 addr 0xff204000 level 2 vect 0x41 si1 at vmes0 addr 0xff204000 level 2 vect 0x41
# Xylogics 7053 controllers
# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
# xd* at xdc? drive ?
# Xylogics 450/451 controllers # Xylogics 450/451 controllers
# xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48 # xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48
# xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49 # xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49
# xy* at xyc? drive ? # Just wire-down the units so bootdev match is easy.
# xy0 at xyc0 drive 0
# xy1 at xyc0 drive 1
# xy2 at xyc1 drive 0
# xy3 at xyc1 drive 1
# Xylogics 7053 controllers
# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
# Just wire-down the units so bootdev match is easy.
# xd0 at xdc0 drive 0
# xd1 at xdc0 drive 1
# xd2 at xdc1 drive 0
# xd3 at xdc1 drive 1
# Xylogics 472 tape controllers? # Xylogics 472 tape controllers?
@ -154,21 +152,12 @@ cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8
# #
scsibus* at scsi? scsibus* at scsi?
# Sun compatible scsi device mappings sd* at scsibus? target ? lun ? # SCSI disks
sd0 at scsibus? target 0 lun 0 st* at scsibus? target ? lun ? # SCSI tapes
sd1 at scsibus? target 0 lun 1 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
sd2 at scsibus? target 1 lun 0 ch* at scsibus? target ? lun ? # SCSI changer devices
sd3 at scsibus? target 1 lun 1 ss* at scsibus? target ? lun ? # SCSI scanners
sd* at scsibus? target ? lun ? uk* at scsibus? target ? lun ? # unknown SCSI devices
st0 at scsibus? target 4 lun 0
st1 at scsibus? target 5 lun 0
st* at scsibus? target ? lun ?
cd0 at scsibus? target 6 lun 0
cd* at scsibus? target ? lun ?
#ch* at scsibus? target ? lun ?
# Memory-disk drivers # Memory-disk drivers
pseudo-device md 2 pseudo-device md 2
@ -179,6 +168,7 @@ pseudo-device bpfilter 8 # packet filter
pseudo-device sl 2 # CSLIP pseudo-device sl 2 # CSLIP
pseudo-device ppp 2 # PPP pseudo-device ppp 2 # PPP
pseudo-device tun 2 # network tunneling over tty pseudo-device tun 2 # network tunneling over tty
#pseudo-device ipfilter # ip filter
pseudo-device pty 64 # pseudo-terminals pseudo-device pty 64 # pseudo-terminals
#pseudo-device vnd 4 # paging to files #pseudo-device vnd 4 # paging to files

View File

@ -1,4 +1,4 @@
# $NetBSD: GENERIC_KGDB,v 1.9 1997/02/10 23:36:09 gwr Exp $ # $NetBSD: GENERIC_KGDB,v 1.10 1997/03/11 21:21:52 gwr Exp $
# #
# GENERIC_KGDB Sun3 (3/50, 3/60, 3/110, 3/160, 3/260) # GENERIC_KGDB Sun3 (3/50, 3/60, 3/110, 3/160, 3/260)
@ -45,7 +45,7 @@ options FIFO # FIFOs; RECOMMENDED
options INET # IP prototol stack support options INET # IP prototol stack support
#options GATEWAY # IP packet forwarding #options GATEWAY # IP packet forwarding
options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
# XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...) # XXX - Work-around for root on slow servers (insurance...)
options NFS_BOOT_RWSIZE=1024 options NFS_BOOT_RWSIZE=1024
# Compatability options # Compatability options
@ -57,7 +57,7 @@ options COMPAT_12 # NetBSD 1.2
options UCONSOLE # Allow non-root TIOCCONS options UCONSOLE # Allow non-root TIOCCONS
# Sun3-specific debugging options # Sun3-specific debugging options
options PMAP_DEBUG #options PMAP_DEBUG
#options VMFAULT_TRACE #options VMFAULT_TRACE
#options SYSCALL_DEBUG #options SYSCALL_DEBUG
#options EXEC_DEBUG #options EXEC_DEBUG
@ -91,29 +91,27 @@ le0 at obio0 addr 0x120000 level 3
# #
# Sun3 "si" SCSI controller (NCR 5380) # Sun3 "si" SCSI controller (NCR 5380)
# This driver has several flags which may be enabled by OR'ing
# the values and using the "flags" directive. (PR#1929)
# Valid flags are:
#
# 0x01 Use DMA (may be polled)
# 0x02 Use DMA completion interrupts
# 0x04 Allow disconnect/reselect
#
# E.g. "flags 0x07" would enable DMA, interrupts, and reselect.
# Note: these values are quite a bit paranoid...
si0 at obio0 addr 0x140000 level 2 si0 at obio0 addr 0x140000 level 2
si0 at vmes0 addr 0xff200000 level 2 vect 0x40 si0 at vmes0 addr 0xff200000 level 2 vect 0x40
si1 at vmes0 addr 0xff204000 level 2 vect 0x41 si1 at vmes0 addr 0xff204000 level 2 vect 0x41
# Xylogics 7053 controllers
# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
# xd* at xdc? drive ?
# Xylogics 450/451 controllers # Xylogics 450/451 controllers
# xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48 # xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48
# xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49 # xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49
# xy* at xyc? drive ? # Just wire-down the units so bootdev match is easy.
# xy0 at xyc0 drive 0
# xy1 at xyc0 drive 1
# xy2 at xyc1 drive 0
# xy3 at xyc1 drive 1
# Xylogics 7053 controllers
# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
# Just wire-down the units so bootdev match is easy.
# xd0 at xdc0 drive 0
# xd1 at xdc0 drive 1
# xd2 at xdc1 drive 0
# xd3 at xdc1 drive 1
# Xylogics 472 tape controllers? # Xylogics 472 tape controllers?
@ -152,21 +150,12 @@ cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8
# #
scsibus* at scsi? scsibus* at scsi?
# Sun compatible scsi device mappings sd* at scsibus? target ? lun ? # SCSI disks
sd0 at scsibus? target 0 lun 0 st* at scsibus? target ? lun ? # SCSI tapes
sd1 at scsibus? target 0 lun 1 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
sd2 at scsibus? target 1 lun 0 ch* at scsibus? target ? lun ? # SCSI changer devices
sd3 at scsibus? target 1 lun 1 ss* at scsibus? target ? lun ? # SCSI scanners
sd* at scsibus? target ? lun ? uk* at scsibus? target ? lun ? # unknown SCSI devices
st0 at scsibus? target 4 lun 0
st1 at scsibus? target 5 lun 0
st* at scsibus? target ? lun ?
cd0 at scsibus? target 6 lun 0
cd* at scsibus? target ? lun ?
#ch* at scsibus? target ? lun ?
# Memory-disk drivers # Memory-disk drivers
pseudo-device md 2 pseudo-device md 2
@ -177,6 +166,7 @@ pseudo-device bpfilter 8 # packet filter
pseudo-device sl 2 # CSLIP pseudo-device sl 2 # CSLIP
pseudo-device ppp 2 # PPP pseudo-device ppp 2 # PPP
pseudo-device tun 2 # network tunneling over tty pseudo-device tun 2 # network tunneling over tty
#pseudo-device ipfilter # ip filter
pseudo-device pty 64 # pseudo-terminals pseudo-device pty 64 # pseudo-terminals
#pseudo-device vnd 4 # paging to files #pseudo-device vnd 4 # paging to files

View File

@ -1,4 +1,4 @@
# $NetBSD: KGDB,v 1.9 1997/02/10 23:36:09 gwr Exp $ # $NetBSD: KGDB,v 1.10 1997/03/11 21:21:52 gwr Exp $
# #
# GENERIC_KGDB Sun3 (3/50, 3/60, 3/110, 3/160, 3/260) # GENERIC_KGDB Sun3 (3/50, 3/60, 3/110, 3/160, 3/260)
@ -45,7 +45,7 @@ options FIFO # FIFOs; RECOMMENDED
options INET # IP prototol stack support options INET # IP prototol stack support
#options GATEWAY # IP packet forwarding #options GATEWAY # IP packet forwarding
options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
# XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...) # XXX - Work-around for root on slow servers (insurance...)
options NFS_BOOT_RWSIZE=1024 options NFS_BOOT_RWSIZE=1024
# Compatability options # Compatability options
@ -57,7 +57,7 @@ options COMPAT_12 # NetBSD 1.2
options UCONSOLE # Allow non-root TIOCCONS options UCONSOLE # Allow non-root TIOCCONS
# Sun3-specific debugging options # Sun3-specific debugging options
options PMAP_DEBUG #options PMAP_DEBUG
#options VMFAULT_TRACE #options VMFAULT_TRACE
#options SYSCALL_DEBUG #options SYSCALL_DEBUG
#options EXEC_DEBUG #options EXEC_DEBUG
@ -91,29 +91,27 @@ le0 at obio0 addr 0x120000 level 3
# #
# Sun3 "si" SCSI controller (NCR 5380) # Sun3 "si" SCSI controller (NCR 5380)
# This driver has several flags which may be enabled by OR'ing
# the values and using the "flags" directive. (PR#1929)
# Valid flags are:
#
# 0x01 Use DMA (may be polled)
# 0x02 Use DMA completion interrupts
# 0x04 Allow disconnect/reselect
#
# E.g. "flags 0x07" would enable DMA, interrupts, and reselect.
# Note: these values are quite a bit paranoid...
si0 at obio0 addr 0x140000 level 2 si0 at obio0 addr 0x140000 level 2
si0 at vmes0 addr 0xff200000 level 2 vect 0x40 si0 at vmes0 addr 0xff200000 level 2 vect 0x40
si1 at vmes0 addr 0xff204000 level 2 vect 0x41 si1 at vmes0 addr 0xff204000 level 2 vect 0x41
# Xylogics 7053 controllers
# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
# xd* at xdc? drive ?
# Xylogics 450/451 controllers # Xylogics 450/451 controllers
# xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48 # xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48
# xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49 # xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49
# xy* at xyc? drive ? # Just wire-down the units so bootdev match is easy.
# xy0 at xyc0 drive 0
# xy1 at xyc0 drive 1
# xy2 at xyc1 drive 0
# xy3 at xyc1 drive 1
# Xylogics 7053 controllers
# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
# Just wire-down the units so bootdev match is easy.
# xd0 at xdc0 drive 0
# xd1 at xdc0 drive 1
# xd2 at xdc1 drive 0
# xd3 at xdc1 drive 1
# Xylogics 472 tape controllers? # Xylogics 472 tape controllers?
@ -152,21 +150,12 @@ cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8
# #
scsibus* at scsi? scsibus* at scsi?
# Sun compatible scsi device mappings sd* at scsibus? target ? lun ? # SCSI disks
sd0 at scsibus? target 0 lun 0 st* at scsibus? target ? lun ? # SCSI tapes
sd1 at scsibus? target 0 lun 1 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
sd2 at scsibus? target 1 lun 0 ch* at scsibus? target ? lun ? # SCSI changer devices
sd3 at scsibus? target 1 lun 1 ss* at scsibus? target ? lun ? # SCSI scanners
sd* at scsibus? target ? lun ? uk* at scsibus? target ? lun ? # unknown SCSI devices
st0 at scsibus? target 4 lun 0
st1 at scsibus? target 5 lun 0
st* at scsibus? target ? lun ?
cd0 at scsibus? target 6 lun 0
cd* at scsibus? target ? lun ?
#ch* at scsibus? target ? lun ?
# Memory-disk drivers # Memory-disk drivers
pseudo-device md 2 pseudo-device md 2
@ -177,6 +166,7 @@ pseudo-device bpfilter 8 # packet filter
pseudo-device sl 2 # CSLIP pseudo-device sl 2 # CSLIP
pseudo-device ppp 2 # PPP pseudo-device ppp 2 # PPP
pseudo-device tun 2 # network tunneling over tty pseudo-device tun 2 # network tunneling over tty
#pseudo-device ipfilter # ip filter
pseudo-device pty 64 # pseudo-terminals pseudo-device pty 64 # pseudo-terminals
#pseudo-device vnd 4 # paging to files #pseudo-device vnd 4 # paging to files

View File

@ -1,4 +1,4 @@
# $NetBSD: RAMDISK,v 1.9 1997/01/31 02:08:24 thorpej Exp $ # $NetBSD: RAMDISK,v 1.10 1997/03/11 21:21:53 gwr Exp $
# #
# RAMDISK: Root/swap on ramdisk # RAMDISK: Root/swap on ramdisk
@ -21,9 +21,10 @@ maxusers 2
# Debugging options. Uncomment either this: # Debugging options. Uncomment either this:
#options DDB #options DDB
# ... or these two: (for KGDB on another machine) # ... or these for KGDB (gdb remote target)
makeoptions DEBUG="-g" # symbols for kgdb + nm makeoptions DEBUG="-g" # debugging symbols for gdb
options KGDB options KGDB
options KGDBDEV=0x0C01
# Enable the hooks used for initializing the ram-disk. # Enable the hooks used for initializing the ram-disk.
options MEMORY_DISK_HOOKS options MEMORY_DISK_HOOKS
@ -35,26 +36,20 @@ file-system NFS # nfs client support
# Need FFS for the ramdisk image # Need FFS for the ramdisk image
file-system FFS # ufs file system file-system FFS # ufs file system
options FIFO # FIFOs; RECOMMENDED options FIFO # named pipes used during install
# Networking options # Networking options
options INET # IP prototol stack support options INET # IP prototol stack support
options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
# XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...) # XXX - Work-around for root on slow servers (insurance...)
options NFS_BOOT_RWSIZE=1024 options NFS_BOOT_RWSIZE=1024
# Compatability options # Compatability options
#options COMPAT_SUNOS # can run SunOS 4.1.1 executables
#options COMPAT_43 # and 4.3BSD and ...
#options COMPAT_10 # NetBSD 1.0
options COMPAT_11 # NetBSD 1.1
options COMPAT_12 # NetBSD 1.2
options UCONSOLE # Allow non-root TIOCCONS
# Sun3-specific debugging options # Sun3-specific debugging options
options DIAGNOSTIC #options DIAGNOSTIC
config netbsd root on ? type ? config netbsd root on md0 type ffs
# #
# Serial ports # Serial ports
@ -70,30 +65,38 @@ ms0 at zsc0 channel 1 # mouse
# #
# Intel Ethernet (onboard, or VME) # Intel Ethernet (onboard, or VME)
ie0 at obio0 addr ? level ? ie0 at obio0 addr 0x0C0000 level 3
ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75 ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75
# Lance Ethernet (only onboard) # Lance Ethernet (only onboard)
le0 at obio0 addr ? level ? le0 at obio0 addr 0x120000 level 3
# #
# Disk and tape devices # Disk and tape devices
# #
# Sun3 "si" SCSI controller (NCR 5380) # Sun3 "si" SCSI controller (NCR 5380)
si0 at obio0 addr ? level ? si0 at obio0 addr 0x140000 level 2
si0 at vmes0 addr 0xff200000 level 2 vect 0x40 si0 at vmes0 addr 0xff200000 level 2 vect 0x40
si1 at vmes0 addr 0xff204000 level 2 vect 0x41 si1 at vmes0 addr 0xff204000 level 2 vect 0x41
# Xylogics 7053 controllers
# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
# xd* at xdc? drive ?
# Xylogics 450/451 controllers # Xylogics 450/451 controllers
# xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48 # xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48
# xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49 # xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49
# xy* at xyc? drive ? # Just wire-down the units so bootdev match is easy.
# xy0 at xyc0 drive 0
# xy1 at xyc0 drive 1
# xy2 at xyc1 drive 0
# xy3 at xyc1 drive 1
# Xylogics 7053 controllers
# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
# Just wire-down the units so bootdev match is easy.
# xd0 at xdc0 drive 0
# xd1 at xdc0 drive 1
# xd2 at xdc1 drive 0
# xd3 at xdc1 drive 1
# Xylogics 472 tape controllers? # Xylogics 472 tape controllers?
@ -106,24 +109,15 @@ si1 at vmes0 addr 0xff204000 level 2 vect 0x41
# #
scsibus* at scsi? scsibus* at scsi?
# Sun compatible scsi device mappings sd* at scsibus? target ? lun ? # SCSI disks
sd0 at scsibus? target 0 lun 0 st* at scsibus? target ? lun ? # SCSI tapes
sd1 at scsibus? target 0 lun 1 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
sd2 at scsibus? target 1 lun 0 #ch* at scsibus? target ? lun ? # SCSI changer devices
sd3 at scsibus? target 1 lun 1 #ss* at scsibus? target ? lun ? # SCSI scanners
sd* at scsibus? target ? lun ? uk* at scsibus? target ? lun ? # unknown SCSI devices
st0 at scsibus? target 4 lun 0
st1 at scsibus? target 5 lun 0
st* at scsibus? target ? lun ?
cd0 at scsibus? target 6 lun 0
cd* at scsibus? target ? lun ?
#ch* at scsibus? target ? lun ?
# Memory-disk (root for install tape) # Memory-disk (root for install tape)
pseudo-device md 2 # Memory-disk pseudo-device md 2
# Misc. # Misc.
pseudo-device loop 1 # network loopback pseudo-device loop 1 # network loopback

View File

@ -1,4 +1,4 @@
# $NetBSD: SMD_TEST,v 1.8 1997/01/31 02:08:25 thorpej Exp $ # $NetBSD: SMD_TEST,v 1.9 1997/03/11 21:21:55 gwr Exp $
# #
# SMD_TEST - for Sun3 (3/50, 3/60, 3/110, 3/160, 3/260) # SMD_TEST - for Sun3 (3/50, 3/60, 3/110, 3/160, 3/260)
@ -19,9 +19,10 @@ options KTRACE # system call tracing support
# Debugging options. Uncomment either this: # Debugging options. Uncomment either this:
options DDB options DDB
# ... or these two: (for KGDB on another machine) # ... or these for KGDB (gdb remote target)
#makeoptions DEBUG="-g" # symbols for kgdb + nm #makeoptions DEBUG="-g" # debugging symbols for gdb
#options KGDB #options KGDB
#options KGDBDEV=0x0C01
# Filesystem options # Filesystem options
file-system FFS # ufs file system file-system FFS # ufs file system
@ -34,14 +35,14 @@ file-system PROCFS # /proc
file-system UNION # union file system file-system UNION # union file system
file-system MFS # memory-based filesystem file-system MFS # memory-based filesystem
options FIFO # FIFOs; RECOMMENDED
options NFSSERVER # nfs server support options NFSSERVER # nfs server support
options FIFO # FIFOs; RECOMMENDED
# Networking options # Networking options
options INET # IP prototol stack support options INET # IP prototol stack support
#options GATEWAY # IP packet forwarding #options GATEWAY # IP packet forwarding
options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
# XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...) # XXX - Work-around for root on slow servers (insurance...)
options NFS_BOOT_RWSIZE=1024 options NFS_BOOT_RWSIZE=1024
# Compatability options # Compatability options
@ -76,30 +77,38 @@ ms0 at zsc0 channel 1 # mouse
# #
# Intel Ethernet (onboard, or VME) # Intel Ethernet (onboard, or VME)
ie0 at obio0 addr ? level ? ie0 at obio0 addr 0x0C0000 level 3
ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75 ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75
# Lance Ethernet (only onboard) # Lance Ethernet (only onboard)
le0 at obio0 addr ? level ? le0 at obio0 addr 0x120000 level 3
# #
# Disk and tape devices # Disk and tape devices
# #
# Sun3 "si" SCSI controller (NCR 5380) # Sun3 "si" SCSI controller (NCR 5380)
si0 at obio0 addr ? level ? si0 at obio0 addr 0x140000 level 2
si0 at vmes0 addr 0xff200000 level 2 vect 0x40 si0 at vmes0 addr 0xff200000 level 2 vect 0x40
si1 at vmes0 addr 0xff204000 level 2 vect 0x41 si1 at vmes0 addr 0xff204000 level 2 vect 0x41
# Xylogics 7053 controllers
xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
xd* at xdc? drive ?
# Xylogics 450/451 controllers # Xylogics 450/451 controllers
xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48 xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48
xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49 xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49
xy* at xyc? drive ? # Just wire-down the units so bootdev match is easy.
xy0 at xyc0 drive 0
xy1 at xyc0 drive 1
xy2 at xyc1 drive 0
xy3 at xyc1 drive 1
# Xylogics 7053 controllers
xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
# Just wire-down the units so bootdev match is easy.
xd0 at xdc0 drive 0
xd1 at xdc0 drive 1
xd2 at xdc1 drive 0
xd3 at xdc1 drive 1
# Xylogics 472 tape controllers? # Xylogics 472 tape controllers?
@ -138,21 +147,12 @@ cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8
# #
scsibus* at scsi? scsibus* at scsi?
# Sun compatible scsi device mappings sd* at scsibus? target ? lun ? # SCSI disks
sd0 at scsibus? target 0 lun 0 st* at scsibus? target ? lun ? # SCSI tapes
sd1 at scsibus? target 0 lun 1 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
sd2 at scsibus? target 1 lun 0 ch* at scsibus? target ? lun ? # SCSI changer devices
sd3 at scsibus? target 1 lun 1 ss* at scsibus? target ? lun ? # SCSI scanners
sd* at scsibus? target ? lun ? uk* at scsibus? target ? lun ? # unknown SCSI devices
st0 at scsibus? target 4 lun 0
st1 at scsibus? target 5 lun 0
st* at scsibus? target ? lun ?
cd0 at scsibus? target 6 lun 0
cd* at scsibus? target ? lun ?
#ch* at scsibus? target ? lun ?
# Memory-disk drivers # Memory-disk drivers
pseudo-device md 2 pseudo-device md 2
@ -163,6 +163,7 @@ pseudo-device bpfilter 8 # packet filter
pseudo-device sl 2 # CSLIP pseudo-device sl 2 # CSLIP
pseudo-device ppp 2 # PPP pseudo-device ppp 2 # PPP
pseudo-device tun 2 # network tunneling over tty pseudo-device tun 2 # network tunneling over tty
#pseudo-device ipfilter # ip filter
pseudo-device pty 64 # pseudo-terminals pseudo-device pty 64 # pseudo-terminals
#pseudo-device vnd 4 # paging to files #pseudo-device vnd 4 # paging to files