From f6099127b72104b74b772dda36dffcf614703e90 Mon Sep 17 00:00:00 2001 From: thorpej Date: Sun, 5 Nov 2000 03:51:14 +0000 Subject: [PATCH] DELPHI -- one of my devel machines at Zembu Labs. This is an example of how to configure the PC-Weasel driver into the kernel. --- sys/arch/i386/conf/DELPHI | 794 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 794 insertions(+) create mode 100644 sys/arch/i386/conf/DELPHI diff --git a/sys/arch/i386/conf/DELPHI b/sys/arch/i386/conf/DELPHI new file mode 100644 index 000000000000..670bf780a1e7 --- /dev/null +++ b/sys/arch/i386/conf/DELPHI @@ -0,0 +1,794 @@ +# $NetBSD: DELPHI,v 1.1 2000/11/05 03:51:14 thorpej Exp $ +# +# DELPHI -- one of thorpej@zembu.com's devel machines +# + +include "arch/i386/conf/std.i386" + +ident "DELPHI-$Revision: 1.1 $" + +maxusers 64 # estimated number of users + +# CPU support. At least one is REQUIRED. +#options I386_CPU +#options I486_CPU +#options I586_CPU +options I686_CPU + +# CPU-related options. +#options MATH_EMULATE # floating point emulation +#options VM86 # virtual 8086 emulation +options USER_LDT # user-settable LDT; used by WINE +# eliminate delay no-ops in I/O; recommended on all but very old machines +options DUMMY_NOPS + +# delay between "rebooting ..." message and hardware reset, in milliseconds +#options CPURESET_DELAY=2000 + +# Misc. i386-specific options +options XSERVER # X server support in console drivers +#options XSERVER_DDB # PF12 gets you into DDB when X is running + +# This option allows you to force a serial console at the specified +# I/O address. see console(4) for details. +#options "CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600 +# you don't want the option below ON iff you are using the +# serial console option of the new boot strap code. +#options CONS_OVERRIDE # Always use above! independent of boot info + +# The following options override the memory sizes passed in from the boot +# block. Use them *only* if the boot block is unable to determine the correct +# values. Note that the BIOS may *correctly* report less than 640k of base +# memory if the extended BIOS data area is located at the top of base memory +# (as is the case on most recent systems). +#options REALBASEMEM=639 # size of base memory (in KB) +#options REALEXTMEM=15360 # size of extended memory (in KB) + +# Standard system options + +options UCONSOLE # users can use TIOCCONS (for xconsole) +options INSECURE # disable kernel security levels + +options RTC_OFFSET=480 # hardware clock is this many mins. west of GMT +options NTP # NTP phase/frequency locked loop + +options KTRACE # system call tracing via ktrace(1) + +options SYSVMSG # System V-like message queues +options SYSVSEM # System V-like semaphores +options SYSVSHM # System V-like memory sharing +#options SHMMAXPGS=1024 # 1024 pages is the default + +options LKM # loadable kernel modules + +# Diagnostic/debugging support options +options DIAGNOSTIC # cheap kernel consistency checks +options POOL_LOGSIZE=1000 +#options DEBUG # expensive debugging checks/support +#options KMEMSTATS # kernel memory statistics (vmstat -m) +options DDB # in-kernel debugger +options DDB_HISTORY_SIZE=100 # enable history editing in DDB +#options KGDB # remote debugger +#options "KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600 +makeoptions DEBUG="-g" # compile full symbol table + +# Compatibility options +#options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8, +#options COMPAT_09 # NetBSD 0.9, +#options COMPAT_10 # NetBSD 1.0, +#options COMPAT_11 # NetBSD 1.1, +#options COMPAT_12 # NetBSD 1.2, +#options COMPAT_13 # NetBSD 1.3, +#options COMPAT_14 # NetBSD 1.4, +#options COMPAT_43 # and 4.3BSD +#options COMPAT_386BSD_MBRPART # recognize old partition ID + +#options COMPAT_SVR4 # binary compatibility with SVR4 +#options COMPAT_IBCS2 # binary compatibility with SCO and ISC +options COMPAT_LINUX # binary compatibility with Linux +#options COMPAT_FREEBSD # binary compatibility with FreeBSD + +#options COMPAT_AOUT # binary compat for NetBSD a.out binaries + +# File systems +file-system FFS # UFS +file-system EXT2FS # second extended file system (linux) +file-system LFS # log-structured file system +file-system MFS # memory file system +file-system NFS # Network File System client +#file-system NTFS # Windows/NT file system (experimental) +file-system CD9660 # ISO 9660 + Rock Ridge file system +file-system MSDOSFS # MS-DOS file system +file-system FDESC # /dev/fd +file-system KERNFS # /kern +#file-system NULLFS # loopback file system +#file-system OVERLAY # overlay file system +#file-system PORTAL # portal filesystem (still experimental) +file-system PROCFS # /proc +#file-system UMAPFS # NULLFS + uid and gid remapping +#file-system UNION # union file system +#file-system CODA # Coda File System; also needs vcoda (below) + +# File system options +#options QUOTA # UFS quotas +#options FFS_EI # FFS Endian Independent support +options SOFTDEP # FFS soft updates support. +options NFSSERVER # Network File System server +#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and + # immutable) behave as system flags. + +# Networking options +options GATEWAY # packet forwarding +options INET # IP + ICMP + TCP + UDP +options INET6 # IPV6 +options IPSEC # IP security +options IPSEC_ESP # IP security (encryption part; define w/IPSEC) +#options IPSEC_DEBUG # debug for IP security +options MROUTING # IP multicast routing +#options NS # XNS +#options NSIP # XNS tunneling over IP +#options ISO,TPIP # OSI +#options EON # OSI tunneling over IP +#options CCITT,LLC,HDLC # X.25 +#options NETATALK # AppleTalk networking protocols +#options PPP_BSDCOMP # BSD-Compress compression support for PPP +#options PPP_DEFLATE # Deflate compression support for PPP +#options PPP_FILTER # Active filter support for PPP (requires bpf) +#options PFIL_HOOKS # pfil(9) packet filter hooks +#options IPFILTER_LOG # ipmon(8) log support + +options NMBCLUSTERS=16384 # max mbuf clusters (32M) + +# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended. +#options TCP_COMPAT_42 + +# These options enable verbose messages for several subsystems. +# Warning, these may compile large string tables into the kernel! +#options EISAVERBOSE # verbose EISA device autoconfig messages +options PCIVERBOSE # verbose PCI device autoconfig messages +#options PCMCIAVERBOSE # verbose PCMCIA configuration messages +options SCSIVERBOSE # human readable SCSI error messages +#options USBVERBOSE # verbose USB device autoconfig messages +#options PNPBIOSVERBOSE # verbose PnP BIOS messages + +#options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM + +# +# wscons options +# +# builtin terminal emulations +#options WSEMUL_SUN # sun terminal emulation +options WSEMUL_VT100 # VT100 / VT220 emulation +# different kernel output - see dev/wscons/wsdisplayvar.h +options WS_KERNEL_FG=WSCOL_GREEN +#options WS_KERNEL_BG=WSCOL_BLACK +# compatibility to other console drivers +options WSDISPLAY_COMPAT_PCVT # emulate some ioctls +options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls +options WSDISPLAY_COMPAT_USL # VT handling +options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes +# see dev/pckbc/wskbdmap_mfii.c for implemented layouts +#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" +# allocate a number of virtual screens at autoconfiguration time +#options WSDISPLAY_DEFAULTSCREENS=4 +# use a large software cursor that doesn't blink +options PCDISPLAY_SOFTCURSOR + +# Kernel root file system and dump configuration. +config netbsd root on ? type ? +#config netbsd root on sd0a type ffs +#config netbsd root on ? type nfs + +# +# Device configuration +# + +mainbus0 at root + +#apm0 at mainbus0 # Advanced power management + +# Tuning for power management, see apm(4) for more details. +#options APM_NO_IDLE # Don't call BIOS CPU idle function +#options APM_V10_ONLY # Use only the APM 1.0 calls +#options APM_NO_POWEROFF # Don't power off on halt(8) +#options APM_POWER_PRINT # Don't print stats on the console +#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts + + +# Basic Bus Support + +# PCI bus support +pci* at mainbus? bus ? +pci* at pchb? bus ? +pci* at ppb? bus ? + +# Configure PCI using BIOS information +#options PCIBIOS # PCI BIOS support +#options PCIBIOSVERBOSE # PCI BIOS verbose info +#options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing +#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup +#options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering + +# PCI bridges +pchb* at pci? dev ? function ? # PCI-Host bridges +#pceb* at pci? dev ? function ? # PCI-EISA bridges +pcib* at pci? dev ? function ? # PCI-ISA bridges +ppb* at pci? dev ? function ? # PCI-PCI bridges +# XXX 'puc's aren't really bridges, but there's no better place for them here +#puc* at pci? dev ? function ? # PCI "universal" comm. cards + +# EISA bus support +#eisa* at mainbus? +#eisa* at pceb? + +# ISA bus support +isa* at mainbus? +#isa* at pceb? +isa* at pcib? + +# PCMCIA bus support +#pcmcia* at pcic? controller ? socket ? +#pcmcia* at tcic? controller ? socket ? + +# ISA PCMCIA controllers +#pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000 +#pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000 +#tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000 + +# PCI PCMCIA controllers +#pcic0 at pci? dev? function ? + +# ISA Plug-and-Play bus support +isapnp0 at isa? + +# ISA Plug-and-Play PCMCIA controllers +#pcic* at isapnp? + +# CardBus bus support +#cbb* at pci? dev ? function ? +#cardslot* at cbb? + +#cardbus* at cardslot? +#pcmcia* at cardslot? + +# Coprocessor Support + +# Math Coprocessor support +npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor + + +# Console Devices + +# ISA console. You can only configure one of these! +#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver +#vt0 at isa? port 0x60 irq 1 # PCVT console driver + +# Keyboard layout configuration for pccons +#options FRENCH_KBD +#options FINNISH_KBD +#options GERMAN_KBD +#options NORWEGIAN_KBD + +# wscons +pckbc0 at isa? # pc keyboard controller +pckbd* at pckbc? # PC keyboard +# "opms" should not be enabled together with "pms" or "pmsi" +pms* at pckbc? # PS/2 mouse for wsmouse +pmsi* at pckbc? # PS/2 "Intelli"mouse for wsmouse +#opms* at pckbc? # backwards compatible PS/2 mouse +#vga0 at isa? +vga* at pci? dev ? function ? +pcdisplay0 at isa? # CGA, MDA, EGA, HGA +wsdisplay* at vga? console ? +wsdisplay* at pcdisplay? console ? +wskbd* at pckbd? console ? +wsmouse* at pms? mux 0 +wsmouse* at pmsi? mux 0 + +pcppi0 at isa? +sysbeep0 at pcppi? + +# Serial Devices + +# PCI serial interfaces +#com* at puc? port ? # 16x50s on "universal" comm boards +#cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards +cz* at pci? dev ? function ? # Cyclades-Z multiport serial + +# ISA Plug-and-Play serial interfaces +#com* at isapnp? # Modems and serial boards + +# PCMCIA serial interfaces +#com* at pcmcia? function ? # Modems and serial cards + +#pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards +#com* at pcmcom? slave ? # ...and the slave devices + +# ISA serial interfaces +#options COM_HAYESP # adds Hayes ESP serial board support +com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports +com1 at isa? port 0x2f8 irq 3 +com2 at isa? port 0x3e8 irq 5 +#com3 at isa? port 0x2e8 irq 9 +#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards +#com* at ast? slave ? +#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards +#boca0 at isa? port 0x100 irq 5 # BOCA 16-port serial cards (BB2016) +#boca1 at isa? port 0x140 irq 5 # this line is also needed for BB2016 +#com* at boca? slave ? +#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards +#com* at tcom? slave ? +#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards +#com* at rtfps? slave ? +#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards + + +# Parallel Printer Interfaces + +# PCI parallel printer interfaces +#lpt* at puc? port ? # || ports on "universal" comm boards + +# ISA parallel printer interfaces +lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports +lpt1 at isa? port 0x278 +lpt2 at isa? port 0x3bc + +# LM7[89] and compatible hardware monitors +#lm0 at isa? port 0x290 # other common ports: 0x280, 0x310 + +# SCSI Controllers and Devices + +# PCI SCSI controllers +#adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI +#adw* at pci? dev ? function ? # AdvanSys 9xxUW SCSI +ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI +#bha* at pci? dev ? function ? # BusLogic 9xx SCSI +#dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID +#isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FibreChannel +#ncr* at pci? dev ? function ? # NCR 53c8xx SCSI +#pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI + +# EISA SCSI controllers +#ahb* at eisa? slot ? # Adaptec 174[02] SCSI +#ahc* at eisa? slot ? # Adaptec 274x, aic7770 SCSI +#bha* at eisa? slot ? # BusLogic 7xx SCSI +#dpt* at eisa? slot ? # DPT EATA SCSI +#uha* at eisa? slot ? # UltraStor 24f SCSI + +# PCMCIA SCSI controllers +#aic* at pcmcia? function ? # Adaptec APA-1460 SCSI + +# ISA Plug-and-Play SCSI controllers +#aha* at isapnp? # Adaptec AHA-154[02 +#aic* at isapnp? # Adaptec AHA-1520B + +# ISA SCSI controllers +#adv0 at isa? port ? irq ? drq ? # AdvanSys APB-514[02] +#aha0 at isa? port 0x330 irq ? drq ? # Adaptec 154[02] SCSI +#aha1 at isa? port 0x334 irq ? drq ? +#ahc0 at isa? port ? irq ? # Adaptec 284x SCSI +#aic0 at isa? port 0x340 irq 11 # Adaptec 152[02] SCSI +#bha0 at isa? port 0x330 irq ? drq ? # BusLogic [457]4X SCSI +#bha1 at isa? port 0x334 irq ? drq ? +# The "nca" and "dpt" probes might give false hits or hang your machine. +#dpt0 at isa? port 0x170 irq ? drq ? # DPT SmartCache/SmartRAID +#nca0 at isa? port 0x360 irq 15 # Port-mapped NCR 53C80 contoller +#nca1 at isa? iomem 0xd8000 irq 5 # Memory-mapped controller (T128, etc.) +#sea0 at isa? iomem 0xc8000 irq 5 # Seagate/Future Domain SCSI +#uha0 at isa? port 0x330 irq ? drq ? # UltraStor [13]4f SCSI +#uha1 at isa? port 0x340 irq ? drq ? +#wds0 at isa? port 0x350 irq 15 drq 6 # WD7000 and TMC-7000 controllers +#wds1 at isa? port 0x358 irq 11 drq 5 + +# CardBus SCSI cards +#ahc* at cardbus? dev ? function ? # Adaptec ADP-1480 + +# SCSI bus support +#scsibus* at adv? +#scsibus* at adw? +#scsibus* at aha? +#scsibus* at ahb? +scsibus* at ahc? +#scsibus* at aic? +#scsibus* at bha? +#scsibus* at dpt? +#scsibus* at isp? +#scsibus* at nca? +#scsibus* at ncr? +#scsibus* at pcscp? +#scsibus* at sea? +#scsibus* at uha? +#scsibus* at wds? + +# SCSI devices +#sd* at scsibus? target ? lun ? # SCSI disk drives +#st* at scsibus? target ? lun ? # SCSI tape drives +cd* at scsibus? target ? lun ? # SCSI CD-ROM drives +#ch* at scsibus? target ? lun ? # SCSI autochangers +#ss* at scsibus? target ? lun ? # SCSI scanners +#uk* at scsibus? target ? lun ? # SCSI unknown + + +# IDE and related devices +# PCI IDE controllers - see pciide(4) for supported hardware. +# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know +# how to set up DMA modes for this chip. This may work, or may cause +# a machine hang with some controllers. +pciide* at pci? dev ? function ? flags 0x0000 + +# ISA Plug-and-Play IDE controllers +#wdc* at isapnp? + +# PCMCIA IDE controllers +#wdc* at pcmcia? function ? + +# ISA ST506, ESDI, and IDE controllers +# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will +# fall back to 16bits I/O if 32bits I/O are not functional). +# Some controllers pass the initial 32bit test, but will fail later. +#wdc0 at isa? port 0x1f0 irq 14 flags 0x00 +#wdc1 at isa? port 0x170 irq 15 flags 0x00 + +# IDE drives +# Flags are used only with controllers that support DMA operations +# and mode settings (e.g. some pciide controllers) +# The lowest order four bits (rightmost digit) of the flags define the PIO +# mode to use, the next set of four bits the DMA mode and the third set the +# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode +# to use, and the last bit must be 1 for this setting to be used. +# For DMA and UDMA, 0xf (1111) means 'disable'. +# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. +# (0xc=1100, 0xa=1010, 0xf=1111) +# 0x0000 means "use whatever the drive claims to support". +#wd* at wdc? channel ? drive ? flags 0x0000 +wd* at pciide? channel ? drive ? flags 0x0000 + +# ATAPI bus support +#atapibus* at wdc? channel ? +atapibus* at pciide? channel ? + +# ATAPI devices +# flags have the same meaning as for IDE drives. +cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives +#sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives +#uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown + + +# Miscellaneous mass storage devices + +# ISA floppy +fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers +#fdc1 at isa? port 0x370 irq ? drq ? +fd* at fdc? drive ? # the drives themselves +# some machines need you to do this instead of fd* +#fd0 at fdc0 drive 0 + +# ISA CD-ROM devices +#mcd0 at isa? port 0x300 irq 10 # Mitsumi CD-ROM drives + +# ISA tape devices +# note: the wt driver conflicts unpleasantly with SMC boards at the +# same I/O address. The probe reprograms their EEPROMs. Don't +# uncomment it unless you are actually using it. +#wt0 at isa? port 0x308 irq 5 drq 1 # Archive and Wangtek QIC tape drives + + +# Network Interfaces + +# PCI network interfaces +#de* at pci? dev ? function ? # DEC 21x4x-based Ethernet +#en* at pci? dev ? function ? # ENI/Adaptec ATM +#ep* at pci? dev ? function ? # 3Com 3c59x +#ex* at pci? dev ? function ? # 3Com 90x[B] +#epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet +#esh* at pci? dev ? function ? # Essential HIPPI card +#fpa* at pci? dev ? function ? # DEC DEFPA FDDI +fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B +#le* at pci? dev ? function ? # PCnet-PCI Ethernet +#ne* at pci? dev ? function ? # NE2000-compatible Ethernet +#ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial +#sip* at pci? dev ? function ? # SiS 900 Ethernet +#tl* at pci? dev ? function ? # ThunderLAN-based Ethernet +#tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) Ethernet +#options TLP_MATCH_21040 +#options TLP_MATCH_21041 +#options TLP_MATCH_21140 +#options TLP_MATCH_21142 +#vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet +#lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3 +#rl* at pci? dev ? function ? # Realtek 8129/8139 + +# EISA network interfaces +#ep* at eisa? slot ? # 3Com 3c579 Ethernet +#fea* at eisa? slot ? # DEC DEFEA FDDI +#tlp* at eisa? slot ? # DEC DE-425 Ethernet + +# ISA Plug-and-Play network interfaces +#ep* at isapnp? # 3Com 3c509 Ethernet +#ne* at isapnp? # NE2000-compatible Ethernet +#tr* at isapnp? # IBM/3COM TROPIC Token-Ring + +# PCMCIA network interfaces +#awi* at pcmcia? function ? # BayStack 650 (802.11FH) +#cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer +#ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet +#mbe* at pcmcia? function ? # MB8696x based Ethernet +#ne* at pcmcia? function ? # NE2000-compatible Ethernet +#ray* at pcmcia? function ? # Raytheon Raylink (802.11) +#sm* at pcmcia? function ? # Megahertz Ethernet +#wi* at pcmcia? function ? # Lucent WaveLan IEEE (802.11) +#xe* at pcmcia? function ? # Xircom PCMCIA cards + +#mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards +#com* at mhzc? +#sm* at mhzc? + +# ISA network interfaces +#ate0 at isa? port 0x2a0 irq ? # AT1700 +#cs0 at isa? port 0x300 iomem ? irq ? drq ? # CS8900 Ethernet +#ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet +#eg0 at isa? port 0x280 irq 9 # 3C505 ethernet cards +#el0 at isa? port 0x300 irq 9 # 3C501 ethernet cards +#ep0 at isa? port ? irq ? # 3C509 ethernet cards +#ef0 at isa? port 0x360 iomem 0xd0000 irq 7 # 3C507 +#ai0 at isa? port 0x360 iomem 0xd0000 irq 7 # StarLAN +#fmv0 at isa? port 0x2a0 irq ? # FMV-180 series +#ix0 at isa? port 0x300 irq 10 # EtherExpress/16 +#iy0 at isa? port 0x360 irq ? # EtherExpress PRO 10 ISA +#lc0 at isa? port 0x320 iomem ? irq ? # DEC EtherWORKS III (LEMAC) +#depca0 at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5 # DEPCA +#le* at depca? +#nele0 at isa? port 0x320 irq 9 drq 7 # NE2100 +#ntwoc0 at isa? port 0x300 irq 5 iomem 0xc8000 flags 1 # Riscom/N2 sync serial +#le* at nele? +#bicc0 at isa? port 0x320 irq 10 drq 7 # BICC IsoLan +#le* at bicc? +#ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards +#ne1 at isa? port 0x300 irq 10 +#sm0 at isa? port 0x300 irq 10 # SMC91C9x Ethernet +#tr0 at isa? port 0xa20 iomem 0xd8000 irq ? # IBM TROPIC based Token-Ring +#tr1 at isa? port 0xa24 iomem 0xd0000 irq ? # IBM TROPIC based Token-Ring +#tr* at isa? port ? irq ? # 3COM TROPIC based Token-Ring +#we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet +#we1 at isa? port 0x300 iomem 0xcc000 irq 10 + +# CardBus network cards +#ex* at cardbus? dev ? function ? # 3Com 3C575TX +#fxp* at cardbus? dev ? function ? # Intel i8255x +#tlp* at cardbus? dev ? function ? # DECchip 21143 + +# MII/PHY support +#exphy* at mii? phy ? # 3Com internal PHYs +#icsphy* at mii? phy ? # Integrated Circuit Systems ICS1890 +inphy* at mii? phy ? # Intel 82555 PHYs +#iophy* at mii? phy ? # Intel 82553 PHYs +#lxtphy* at mii? phy ? # Level One LXT-970 PHYs +nsphy* at mii? phy ? # NS83840 PHYs +#nsphyter* at mii? phy ? # NS83843 PHYs +#qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs +#sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs +#tlphy* at mii? phy ? # ThunderLAN PHYs +#tqphy* at mii? phy ? # TDK Semiconductor PHYs +#ukphy* at mii? phy ? # generic unknown PHYs + +# USB Controller and Devices + +# PCI USB controllers +#uhci* at pci? dev ? function ? # Universal Host Controller (Intel) +#ohci* at pci? dev ? function ? # Open Host Controller + +# CardBus USB controllers +#ohci* at cardbus? dev ? function ? # Open Host Controller + +# USB bus support +#usb* at uhci? +#usb* at ohci? + +# USB Hubs +#uhub* at usb? +#uhub* at uhub? port ? configuration ? interface ? + +# USB Mice +#ums* at uhub? port ? configuration ? interface ? +#wsmouse* at ums? mux 0 + +# USB Keyboards +#ukbd* at uhub? port ? configuration ? interface ? +#wskbd* at ukbd? console ? mux 1 + +# USB Generic HID devices +#uhid* at uhub? port ? configuration ? interface ? + +# USB Printer +#ulpt* at uhub? port ? configuration ? interface ? + +# USB Modem +#umodem* at uhub? port ? configuration ? +#ucom* at umodem? + +# USB Mass Storage +#umass* at uhub? port ? configuration ? interface ? +#scsibus* at umass? channel ? + +# USB audio +#uaudio* at uhub? port ? configuration ? + +# USB Ethernet adapters +#aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters +#cue* at uhub? port ? # CATC USB-EL1201A based adapters +#kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters + +# USB Generic driver +#ugen* at uhub? port ? + + +# Plug-and-Play BIOS and attached devices + +pnpbios0 at mainbus0 + +# mainboard audio chips +#ess* at pnpbios0 index ? # ESS AudioDrive +#sb* at pnpbios0 index ? # NeoMagic 256AV in sb mode +#wss* at pnpbios0 index ? # NeoMagic 256AV in wss mode +#ym* at pnpbios0 index ? # OPL3-SA3 + +# com port +#com* at pnpbios0 index ? + +# parallel port +#lpt* at pnpbios0 index ? + +# IDE controller on Toshiba Portege 3000 series (crippled PCI device) +#pciide* at pnpbios0 index ? + + +# Audio Devices + +# PCI audio devices +#clcs* at pci? dev ? function ? # Cirrus Logic CS4280 +eap* at pci? dev ? function ? # Ensoniq AudioPCI +#eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive +#fms* at pci? dev ? function ? # Forte Media FM801 +#sbl* at pci? dev ? function ? # SoundBlaster Live! +#sv* at pci? dev ? function ? # S3 SonicVibes + +# ISA Plug-and-Play audio devices +#ess* at isapnp? # ESS Tech ES1887, ES1888, ES888 audio +#guspnp* at isapnp? # Gravis Ultra Sound PnP audio +#sb* at isapnp? # SoundBlaster-compatible audio +#wss* at isapnp? # Windows Sound System +#ym* at isapnp? # Yamaha OPL3-SA3 audio + +# ISA audio devices +# the "aria" probe might give false hits +#aria0 at isa? port 0x290 irq 10 # Aria +#ess0 at isa? port 0x220 irq 5 drq 1 drq2 5 # ESS 18XX +#gus0 at isa? port 0x220 irq 7 drq 1 drq2 6 # Gravis Ultra Sound +#pas0 at isa? port 0x220 irq 7 drq 1 # ProAudio Spectrum +#pss0 at isa? port 0x220 irq 7 drq 6 # Personal Sound System +#sp0 at pss0 port 0x530 irq 10 drq 0 # sound port driver +#sb0 at isa? port 0x220 irq 5 drq 1 drq2 5 # SoundBlaster +#wss0 at isa? port 0x530 irq 10 drq 0 drq2 1 # Windows Sound System + +# OPL[23] FM synthesizers +#opl0 at isa? port 0x388 # use only if not attached to sound card +#opl* at eso? +#opl* at ess? +#opl* at fms? +#opl* at sb? +#opl* at sv? +#opl* at wss? +#opl* at ym? + +# Audio support +#audio* at aria? +#audio* at clcs? +audio* at eap? +#audio* at eso? +#audio* at ess? +#audio* at fms? +#audio* at gus? +#audio* at guspnp? +#audio* at pas? +#audio* at sb? +#audio* at sbl? +#audio* at sp? +#audio* at sv? +#audio* at uaudio? +#audio* at wss? +#audio* at ym? + +# MPU 401 UARTs +#mpu* at isa? port 0x330 irq 9 # MPU401 or compatible card +#mpu* at eso? +#mpu* at fms? +#mpu* at sb? +#mpu* at ym? + +# MIDI support +midi* at eap? # 137[01] MIDI port +#midi* at mpu? # MPU 401 +#midi* at opl? # OPL FM synth +#midi* at pcppi? # MIDI interface to the PC speaker +#midi* at sb? # SB1 MIDI port + +# The spkr driver provides a simple tone interface to the built in speaker. +spkr0 at pcppi? # PC speaker + + +# Mice + +# ISA busmice +#lms0 at isa? port 0x23c irq 5 # Logitech bus mouse +#lms1 at isa? port 0x238 irq 5 +#mms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse +#mms1 at isa? port 0x238 irq 5 +#wsmouse* at lms? mux 0 +#wsmouse* at mms? mux 0 +# backwards compatible versions +#olms0 at isa? port 0x23c irq 5 # Logitech bus mouse +#olms1 at isa? port 0x238 irq 5 +#omms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse +#omms1 at isa? port 0x238 irq 5 +#opms0 at pc? irq 12 # PS/2 auxiliary port mouse +#opms0 at vt? irq 12 # PS/2 auxiliary port mouse + + +# Joysticks + +# ISA Plug-and-Play joysticks +#joy* at isapnp? # Game ports (usually on audio cards) + +# ISA joysticks. Probe is a little strange; add only if you have one. +#joy0 at isa? port 0x201 + + +# Miscellaneous Devices + +# Planetconnect Satellite receiver driver. +#satlink0 at isa? port 0x300 drq 1 + + +# Pull in optional local configuration +include "arch/i386/conf/GENERIC.local" + + +# Pseudo-Devices + +# disk/mass storage pseudo-devices +#pseudo-device ccd 4 # concatenated/striped disk devices +#pseudo-device raid 4 # RAIDframe disk driver +#options RAID_AUTOCONFIG # auto-configuration of RAID components +#pseudo-device md 1 # memory disk device (ramdisk) +pseudo-device vnd 4 # disk-like interface to files + +# network pseudo-devices +pseudo-device bpfilter 8 # Berkeley packet filter +#pseudo-device ipfilter # IP filter (firewall) and NAT +pseudo-device loop # network loopback +pseudo-device ppp 2 # Point-to-Point Protocol +#pseudo-device sl 2 # Serial Line IP +#pseudo-device strip 2 # Starmode Radio IP (Metricom) +#pseudo-device tun 2 # network tunneling over tty +pseudo-device gre 2 # generic L3 over IP tunnel +#pseudo-device mobip 2 # Mobile IP (RFC 2004) +pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) +pseudo-device faith 1 # IPv[46] tcp relay translation i/f +pseudo-device vlan # 802.1Q Virtual LANs + +# miscellaneous pseudo-devices +pseudo-device pty 128 # pseudo-terminals +#pseudo-device tb 1 # tablet line discipline +#pseudo-device sequencer 1 # MIDI sequencer +# rnd works; RND_COM does not on port i386 yet. +pseudo-device rnd # /dev/random and in-kernel generator +#options RND_COM # use "com" randomness as well (BROKEN) + +# a pseudo device needed for Coda # also needs CODA (above) +#pseudo-device vcoda 4 # coda minicache <-> venus comm. + +# mouse & keyboard multiplexor pseudo-devices +pseudo-device wsmux 2 + +# Support for the Middle Digital, Inc. PC-Weasel serial console board +pseudo-device pcweasel