Update to current distribution.

distrib/notes/pc532/contents

@@ -1,36 +1,43 @@
-	$NetBSD: contents,v 1.5 1998/01/09 18:47:00 perry Exp $	
+	$NetBSD: contents,v 1.6 1998/01/19 20:34:30 phil Exp $
 
-The pc532-specific portion of the NetBSD 1.2 release is found in the
+The pc532-specific portion of the NetBSD _VER release is found in the
 "pc532" subdirectory of the distribution.  That subdirectory contains
 the files as follows:
 
-.../NetBSD-1.2/pc532/
+.../NetBSD-_VER/pc532/
 
 	INSTALL			Installation notes; this file.
-	CKSUM			output of "cksum *.gz"
-	inst-11.fs.gz		Installation file system.
-	download.c.gz		Source for a pc532 ROM compat download pgm
-	netbsd.default.gz	Upgrade kernel
-	base.tar.gz		base distribution
-	comp.tar.gz		compiler tools & libraries
-	etc.tar.gz		files for /etc
-	games.tar.gz		/usr/games and friends
-	man.tar.gz		/usr/man
-	misc.tar.gz		various
-	text.tar.gz		groff and friends
 
+.../NetBSD-_VER/pc532/binary/sets
+
+	base.tgz		base distribution
+	comp.tgz		compiler tools & libraries
+	etc.tgz			files for /etc
+	kern.tgz		distribution kernel, install and upgrade
+	games.tgz		/usr/games and friends
+	man.tgz			/usr/man
+	misc.tgz		various
+	text.tgz		groff and friends
+
+.../NetBSD-_VER/pc532/installation/floppy
+
+	floppy-144.gz		Installation file system.
+
+.../NetBSD-_VER/pc532/
+
+	download.c.gz		Source for a pc532 ROM compat download pgm
 
 The binary distribution consists of the following files:
 
-	base.tar.gz
+	base.tgz
-		The NetBSD/pc532 1.2 base binary distribution.  You
+		The NetBSD/pc532 _VER base binary distribution.  You
 		MUST install this distribution set.  It contains the
 		base NetBSD utilities that are necessary for the
 		system to run and be minimally functional.  It
 		excludes everything described below.
-		[ 7.8M gzipped ]
+		[ 9.4M gzipped ]
 
-	comp.tar.gz
+	comp.tgz
 		The NetBSD/pc532 Compiler tools.  All of the tools
 		relating to C, C++, and FORTRAN (yes, there are two!).
 		This set includes the system include files
@@ -38,9 +45,9 @@ The binary distribution consists of the following files:
 		and the various system libraries.  This set also includes
 		the manual pages for all the utilities it contains, as well
 		as the system call and library manual pages.
-		[ 5.3M gzipped ]
+		[ 6.8M gzipped ]
 
-	etc.tar.gz
+	etc.tgz
 		This distribution set contains the system
 		configuration files that reside in /etc and in several
 		other places.  This set MUST be installed if you are
@@ -48,31 +55,35 @@ The binary distribution consists of the following files:
 		used if you are upgrading.  (If you are upgrading,
 		it's recommended that you get a copy of this set and
 		CAREFULLY upgrade your configuration files by hand.)
-		[ 68K gzipped ]
+		[ 53K gzipped ]
 
-	games.tar.gz
+	games.tgz
 		This set includes the games and their manual pages.
-		[ 2.8M gzipped ]
+		[ 2.9M gzipped ]
 
-	man.tar.gz
+	kern.tgz
+		This is the default kernel for both the standard install
+		and for the upgrade.
+
+	man.tgz
 		This set includes all of the manual pages for the
 		binaries and other software contained in the base set.
 		Note that it does not include any of the manual pages
 		that are included in the other sets.
-		[ 0.9M gzipped ]
+		[ 2.4M gzipped ]
 
-	misc.tar.gz
+	misc.tgz
 		This set includes the system dictionaries (which are
 		rather large), the typesettable document set, and
 		man pages for other architectures which happen to be
 		installed from the source tree by default.
-		[ 1.9M gzipped ]
+		[ 2.2M gzipped ]
 
-	text.tar.gz
+	text.tgz
 		This set includes NetBSD's text processing tools,
 		including groff, all related programs, and their
 		manual pages.
-		[ 0.8M gzipped ]
+		[ 1.0M gzipped ]
 
 The pc532 distribution set does not include a security distribution.
 If you are in the US and want the security distribution you must
@@ -88,7 +99,7 @@ is supported by the following files:
 	Initial file system used via SCSI floppy or downloaded into 
 	memory:
 
-		inst-11.fs	-- file system containing boot loader 
+	floppy-144.fs		-- file system containing boot loader 
 				   and install kernel with 2MB
 				   ram root file system.
 
@@ -97,8 +108,8 @@ is supported by the following files:
 				   pc532 ROM monitor.
 
 
-The upgrade process is supported by having a copy of a 1.2 kernel
+The upgrade process is supported by having a copy of a _VER kernel
 available.  This file is:
 
-	netbsd.default.gz	-- a kernel produced from the DEFAULT
+	kern.tgz		-- contains a kernel produced from the 
-				   configuration file in pc532/conf.
+				   DEFAULT configuration file in pc532/conf.

distrib/notes/pc532/hardware

@@ -1,6 +1,6 @@
-	$NetBSD: hardware,v 1.4 1998/01/09 18:47:01 perry Exp $	
+	$NetBSD: hardware,v 1.5 1998/01/19 20:34:33 phil Exp $
 
-NetBSD/pc532 1.2 runs on a PC532 computer.  It supports a subset of the
+NetBSD/pc532 _VER runs on a PC532 computer.  It supports a subset of the
 "standard" hardware to date.  This is defined as:
 
 	4 - 32 Megs of memory

distrib/notes/pc532/install

@@ -1,10 +1,10 @@
-	$NetBSD: install,v 1.5 1998/01/09 18:47:02 perry Exp $	
+	$NetBSD: install,v 1.6 1998/01/19 20:34:35 phil Exp $
 
 (IF you already have NetBSD/pc532 installed and you only want to update
 your system, see the next section.)
 
 To install NetBSD/pc532, there are several things you need to know.
-First, NetBSD "autoconfigs" the scsi devices. inst-12.fs has only
+First, NetBSD "autoconfigs" the scsi devices. floppy-144.fs has only
 support for disks configured into the kernel. Starting the search at
 SCSI address 0, lun 0 and increasing, the first disk found will be sd0
 regardless of the address, the second will be sd1. KLONDIKE for example
@@ -17,7 +17,7 @@ has the following devices installed:
 	cd0 -> ID 3 LUN 0: Toshiba XM-4101TA CD-ROM drive
 	st0 -> ID 4 LUN 0: Tandberg TDC3600 QIC tape drive
 
-Only sd0-sd3 are supported by the inst-12.fs kernel.
+Only sd0-sd3 are supported by the floppy-144.fs kernel.
 
 Next you need to know what the install script wants to do.  This install
 is script on the ram disk root that can do most of the work of configuring
@@ -43,15 +43,15 @@ your disk.
 The Install Procedure:
 
   a) Adjust your console device settings.
-	The inst-12.fs kernel will come up with 9600 baud, 7 bits,
+	The floppy-144.fs kernel will come up with 9600 baud, 7 bits,
 	even parity and one stop bit. Adjust your terminal to match
 	these settings. The monitor's baud rate can be changed with
 	"baud d'9600".
 
-  b) Get inst-12.fs and boot the kernel.
+  b) Get floppy-144.fs and boot the kernel.
 
 	From Floppy: (and using the autoboot monitor)
-	If you have a 1.44 meg SCSI floppy drive, you can put inst-12.fs
+	If you have a 1.44 meg SCSI floppy drive, you can put floppy-144.fs
 	onto a 3.5" floppy disk. Insert the disk into your floppy
 	drive and use the monitor's boot command to boot the default
 	image from the floppy. The image booted will ask you for a
@@ -60,11 +60,11 @@ The Install Procedure:
 	Replace X with your drive number. For KLONDIKE X would be "2".
 
 	Tape:
-	You will need to load a copy of inst-12.fs into RAM.
+	You will need to load a copy of floppy-144.fs into RAM.
-		- load the inst-12.fs at 0x288000
+		- load the floppy-144.fs at 0x260000
-		- run at 0x3E8820
+		- run at 0x3EB020
 	The boot program will ask you now for a kernel to load. Answer
-		rd0a:/netbsd
+		md0a:/netbsd.gz
 
 	Serial line:
 	Provided with the distribution is source for program called 
@@ -73,9 +73,17 @@ The Install Procedure:
 	output to standard output a byte sequence used by the pc532
 	ROM monitor to download a binary file into RAM.  Using this
 	program on a computer connected to the pc532, one can
-	load a copy of inst-12.fs into RAM at 0x288000.  The boot
+	load a copy of floppy-144.fs into RAM at 0x260000.  The boot
 	sequence is now the same as with tape.
 
+  c) The floppy-144.fs will run the new sysinst utility as the standard
+     setup.  It assumes a VT100 compatible terminal.  If you don't want
+     to try using sysinst or you dont' have a VT100, type f followed by
+     the return.  Then following these instructions for installation.
+     If you want to use sysinst, read the i386 INSTALL instructions to
+     learn about sysinst.  Note: sysinst does not support SLIP or PPP
+     connections.
+
   c) Choose a disk geometry.  For me, the reported geometry left
 	some sectors "unallocated".  That is, the autoconfig message
 	said the disk had 2428 cylinders, 9 heads, and 93 sectors/track.
@@ -83,7 +91,7 @@ The Install Procedure:
 	2053880 sectors.
 
 	To help in this process, there is a program "factor" that is
-	on the inst-12.fs.  The usage is "factor number" and it lists
+	on the floppy-144.fs.  The usage is "factor number" and it lists
 	the prime factors of number.
 	For example, with the 2053880 sector disk I got:
 
@@ -118,7 +126,7 @@ The Install Procedure:
 	partitions, it will ask for a mount point.  The mount point will
 	be "relative to /" and should not include the leading "/".  Also,
 	IF you do not want the partition to have newfs run on it (that is
-	it might be the last one and have a copy of inst-12.fs) enter "NO"
+	it might be the last one and have a copy of floppy-144.fs) enter "NO"
 	to the mount point and it will not run newfs on the partition.
 	It will enter the partition into the disklabel.
 
@@ -153,9 +161,9 @@ The Install Procedure:
 	c) tape
 
 	d) cd-rom (If you have a CD with NetBSD/532, which most likely
-	   won't happen for a while after 1.2 release.)
+	   won't happen for a while after _VER release.)
 	   -- mount -rt cd9660 /dev/cd0a /mnt
-	   Get the tar.gz files from the cd-rom
+	   Get the .tgz files from the cd-rom
 
 	e) Use the ROM compatable "download" program.  The program
 	   download is included in the initial installation and
@@ -164,38 +172,37 @@ The Install Procedure:
 	   correct, the file is retained.  If the CRC is not 
 	   correct, the file is deleted.
 
-	f) some other method? (Let me know about it.)
+  h) Load the .tgz files.  Choose a place to put them.  I would make
-
-  h) Load the tar.gz files.  Choose a place to put them.  I would make
 	a directory /gz.files and put them there.  If you are "short
 	on space," you might want to load them and extract them one
 	at a time.  A minimum installation is "base" and "etc".  It
-	takes about 32 Megs installed + 15 Megs for the base.tar.gz.
+	takes about 32 Megs installed + 20 Megs for the base.tgz.
 
-  i) Extract the tar files in /.  For example, if your *.tar.gz were
+  i) Extract the tar files in /.  For example, if your *.tgz were
-	in a directory /gz.files, to extract base.tar.gz you would:
+	in a directory /gz.files, to extract base.tgz you would:
 
 	- cd / 
-	- tar -xpzf /gz.files/base.tar.gz --unlink
+	- tar -xpzf /gz.files/base.tgz --unlink
 
 	Add v to the flags if you want a verbose extract.
 	The --unlink is to make sure that the install versions
 	of sh, init, ... are replaced by their proper versons
-	in base.tar.gz.  I think it is wise to include the --unlink
+	in base.tgz.  I think it is wise to include the --unlink
 	for other things.
 
-  j) Extract at least "base" and "etc" for a new installation.  For
+  j) Extract at least "base", "etc" and "kern" for a new installation.
-	"update" extracts, don't extract "etc" directly unless you 
+	For "update" extracts, move /etc to /etc.old and then extract
-	have saved your current /etc tree.  For "full" installations,
+	"etc".  You should extract "etc" for upgrades.  For "full" 
-	extract all files.
+	installations, 	extract all files.
 
   k) Edit the information in /etc
 
+	- rc.conf - Many of the following things can be configured here
 	- hosts   -  host name and address information
 	- myname  -  your host name
 	- mygate  -  hostname of gateway (assuming you have one)
 	- resolv.conf - which nameserver to use
-	- hostname.{sl0,ppp0,plip0} - interface hostname
+	- ifconfig.{sl0,ppp0,plip0} - interface hostname
 	- netstart - configures the network and says if sendmail should
 			be started
 	- ttys    -  make sure the console entry has the correct speed

distrib/notes/pc532/upgrade

@@ -1,11 +1,11 @@
-	$NetBSD: upgrade,v 1.4 1998/01/09 18:47:06 perry Exp $	
+	$NetBSD: upgrade,v 1.5 1998/01/19 20:34:37 phil Exp $
 
-The upgrade to NetBSD 1.2 is a binary upgrade; it would be prohibitive
+The upgrade to NetBSD _VER is a binary upgrade; it would be prohibitive
-to make users upgrade by compiling and installing the 1.2 sources, and
+to make users upgrade by compiling and installing the _VER sources, and
 it would be very difficult to even compile a set of instructions that
 allowed them to do so.  
 
-To do the upgrade, you must have at least base.tar.gz on disk and
+To do the upgrade, you must have at least base.tgz on disk and
 a copy of the proper netbsd.default.  It will require quite a bit
 of disk space to do the upgrade.
 
@@ -17,24 +17,25 @@ beginning the upgrade process.
 
 To upgrade your system, follow the following instructions:
 
-	Make sure your are root.  Just in case the new binaries don't
+	Assuming you have space, load the .tgz files onto disk
-	run with the old kernel, make copies of several key binaries
+	some place.  Then boot the floppy-144.fs image via the
-	from /bin, /sbin and /usr/bin in some directory.  (Things like
+	method you use.  Under the install system, extract the
-	sh, cp, ls, rm, tar, halt, and others.)
+	.tgz files as mentioned below or read the i386 INSTALL
+	notes for how to use sysinst.
 
-	Extract the tar.gz files.  Remember to use the --unlink
+	Extract the .tgz files.  Remember to use the --unlink
 	option with tar so it can replace binaries currently in use.
-	For example, to extract base.tar.gz:
+	For example, to extract base.tgz:
 
 		cd / 
-		tar -xpzf /gz.files/base.tar.gz --unlink
+		tar -xpzf /gz.files/base.tgz --unlink
 
-	Extract all the tar.gz files you want.  You should carefully
+	Extract all the .tgz files you want.  You should carefully
 	work at upgrading /etc.  There may be changes to file formats
 	depending on what version of NetBSD/pc532 you are running.
 
 	BE CAREFUL IF YOU ARE NOT RUNNING WITH SECURITY.  The 
-	1.2 distribution does contain support for password encryption.
+	_VER distribution does contain support for password encryption.
 	If you are upgrading from 1.0, it would be reasonable to save a
 	copy of master.passwd and remove all passwords until after you
 	upgrade.  (NetBSD-1.0 did not ship with password encryption.)