diff --git a/sys/arch/pmax/pmax/autoconf.c b/sys/arch/pmax/pmax/autoconf.c index 9c7be481808c..1011c32ac46c 100644 --- a/sys/arch/pmax/pmax/autoconf.c +++ b/sys/arch/pmax/pmax/autoconf.c @@ -1,4 +1,4 @@ -/* $NetBSD: autoconf.c,v 1.46 2000/01/14 13:45:23 simonb Exp $ */ +/* $NetBSD: autoconf.c,v 1.47 2000/02/19 04:16:18 nisimura Exp $ */ /* * Copyright (c) 1988 University of Utah. @@ -43,19 +43,10 @@ */ #include /* RCS ID & Copyright macro defns */ -__KERNEL_RCSID(0, "$NetBSD: autoconf.c,v 1.46 2000/01/14 13:45:23 simonb Exp $"); - -/* - * Setup the system to run on the current machine. - * - * Configure() is called at boot time. Available - * devices are determined (from possibilities mentioned in ioconf.c), - * and the drivers are initialized. - */ +__KERNEL_RCSID(0, "$NetBSD: autoconf.c,v 1.47 2000/02/19 04:16:18 nisimura Exp $"); #include #include -#include #include #include #include @@ -66,18 +57,14 @@ __KERNEL_RCSID(0, "$NetBSD: autoconf.c,v 1.46 2000/01/14 13:45:23 simonb Exp $") #include - struct intrhand intrtab[MAX_INTR_COOKIES]; - -static void findroot __P((struct device **, int *)); +struct device *booted_device; +int booted_slot, booted_unit, booted_partition; +char *booted_protocol; /* - * Determine mass storage and memory configuration for a machine. - * Print cpu type, and then iterate over an array of devices - * found on the baseboard or in turbochannel option slots. - * Once devices are configured, enable interrupts, and probe - * for attached scsi devices. - */ + * Configure all devices on system + */ void cpu_configure() { @@ -92,141 +79,67 @@ cpu_configure() /* Configuration is finished, turn on interrupts. */ _splnone(); /* enable all source forcing SOFT_INTs cleared */ - /* - * Probe SCSI bus using old-style pmax configuration table. - * We do not yet have machine-independent SCSI support or polled - * SCSI. - */ printf("Beginning old-style SCSI device autoconfiguration\n"); configure_scsi(); } -void -cpu_rootconf() -{ - struct device *booted_device; - int booted_partition; - - findroot(&booted_device, &booted_partition); - - printf("boot device: %s\n", - booted_device ? booted_device->dv_xname : ""); - - setroot(booted_device, booted_partition); -} - -u_long bootdev = 0; /* should be dev_t, but not until 32 bits */ - /* - * Attempt to find the device from which we were booted. - */ -static void -findroot(devpp, partp) - struct device **devpp; - int *partp; -{ - int i, majdev, unit, part, controller; - struct pmax_scsi_device *dp; - const char *bootdv_name; - - /* - * Default to "not found". - */ - *devpp = NULL; - *partp = 0; - bootdv_name = NULL; - - if ((bootdev & B_MAGICMASK) != B_DEVMAGIC) - return; - - majdev = B_TYPE(bootdev); - for (i = 0; dev_name2blk[i].d_name != NULL; i++) { - if (majdev == dev_name2blk[i].d_maj) { - bootdv_name = dev_name2blk[i].d_name; - break; - } - } - - if (bootdv_name == NULL) { -#if defined(DEBUG) - printf("findroot(): no name2blk for boot device %d\n", majdev); -#endif - return; - } - - controller = B_CONTROLLER(bootdev); - part = B_PARTITION(bootdev); - unit = B_UNIT(bootdev); - - for (dp = scsi_dinit; dp->sd_driver != NULL; dp++) { - if (dp->sd_alive && dp->sd_drive == unit && - dp->sd_ctlr == controller && - dp->sd_driver->d_name[0] == bootdv_name[0] && - dp->sd_driver->d_name[1] == bootdv_name[1]) { - *devpp = dp->sd_devp; - *partp = part; - return; - } - } -#if defined(DEBUG) - printf("findroot(): no driver for boot device %s\n", bootdv_name); -#endif -} - -/* - * Look at the string 'cp' and decode the boot device. - * Boot names can be something like 'rz(0,0,0)vmunix' or '5/rz0/vmunix'. + * Look at the string 'cp' and decode the boot device. Boot names + * can be something like 'rz(0,0,0)vmunix' or '5/rz0/vmunix'. */ void makebootdev(cp) char *cp; { - int majdev, unit, part, ctrl; + booted_device = NULL; + booted_slot = booted_unit = -1; + booted_partition = 0; + booted_protocol = NULL; - if (*cp >= '0' && *cp <= '9') { - /* XXX should be able to specify controller */ - if (cp[1] != '/' || cp[4] < '0' || cp[4] > '9') - goto defdev; - unit = cp[4] - '0'; - if (cp[5] >= 'a' && cp[5] <= 'h') - part = cp[5] - 'a'; - else - part = 0; - cp += 2; - for (majdev = 0; dev_name2blk[majdev].d_name != NULL; - majdev++) { - if (cp[0] == dev_name2blk[majdev].d_name[0] && - cp[1] == dev_name2blk[majdev].d_name[1]) { - bootdev = MAKEBOOTDEV( - dev_name2blk[majdev].d_maj, 0, 0, - unit, part); - return; - } - } - goto defdev; + if (cp[0] == 'r' && cp[1] == 'z' && cp[2] == '(') { + if (cp[3] >= '0' && cp[3] <= '9' && cp[4] == ',' + && cp[5] >= '0' && cp[5] <= '9' && cp[6] == ',' + && cp[7] >= '0' && cp[7] <= '9' && cp[8] == ')') + return; + booted_slot = cp[3] - '0'; + booted_unit = cp[5] - '0'; + booted_partition = cp[7] - '0'; + booted_protocol = "SCSI"; + } + if (cp[0] >= '0' && cp[0] <= '9' && cp[1] == '/') { + booted_slot = cp[0] - '0'; + booted_unit = booted_partition = 0; + if (cp[2] == 'r' && cp[3] == 'z' + && cp[4] >= '0' && cp[4] <= '9') { + booted_protocol = "SCSI"; + booted_unit = cp[4] - '0'; + } + else if (strncmp(cp+2, "tftp", 4) == 0) + booted_protocol = "BOOTP"; + else if (strncmp(cp+2, "mop", 3) == 0) + booted_protocol = "MOP"; } - for (majdev = 0; dev_name2blk[majdev].d_name != NULL; majdev++) - if (cp[0] == dev_name2blk[majdev].d_name[0] && - cp[1] == dev_name2blk[majdev].d_name[1] && - cp[2] == '(') - goto fndmaj; -defdev: - bootdev = B_DEVMAGIC; - return; - -fndmaj: - majdev = dev_name2blk[majdev].d_maj; - for (ctrl = 0, cp += 3; *cp >= '0' && *cp <= '9'; ) - ctrl = ctrl * 10 + *cp++ - '0'; - if (*cp == ',') - cp++; - for (unit = 0; *cp >= '0' && *cp <= '9'; ) - unit = unit * 10 + *cp++ - '0'; - if (*cp == ',') - cp++; - for (part = 0; *cp >= '0' && *cp <= '9'; ) - part = part * 10 + *cp++ - '0'; - if (*cp != ')') - goto defdev; - bootdev = MAKEBOOTDEV(majdev, 0, ctrl, unit, part); +} + +void +cpu_rootconf() +{ + struct device *dv; + char name[4]; + + /* + * N.B., below works for rz drive on primary SCSI controller. + */ + booted_device = NULL; + snprintf(name, sizeof(name), "rz%d", booted_unit); + for (dv = TAILQ_FIRST(&alldevs); dv; dv = TAILQ_NEXT(dv, dv_list)) { + if (dv->dv_class == DV_DISK && !strcmp(dv->dv_xname, name)) { + booted_device = dv; + break; + } + } + printf("boot device: %s\n", + booted_device ? booted_device->dv_xname : ""); + + setroot(booted_device, booted_partition); }