diff --git a/sys/arch/amiga/conf/AMIGA b/sys/arch/amiga/conf/AMIGA index 7c2a408b27b8..7c60cadc88f9 100644 --- a/sys/arch/amiga/conf/AMIGA +++ b/sys/arch/amiga/conf/AMIGA @@ -1,524 +1,25 @@ -# $NetBSD: AMIGA,v 1.106 2007/08/20 07:42:46 is Exp $ +# $NetBSD: AMIGA,v 1.107 2007/09/07 12:53:40 lukem Exp $ + +# GENERIC, without DraCo # -# This file was automatically created. -# Changes will be lost when make is run in this directory. -# -# Created from: # NetBSD: GENERIC.in,v 1.62 2007/08/20 07:40:29 is Exp $ -# -# GENERIC machine description file -# -# This machine description file is used to generate the default NetBSD -# kernel. The generic kernel does not include all options, subsystems -# and device drivers, but should be useful for most applications. -# -# The machine description file can be customised for your specific -# machine to reduce the kernel size and improve its performance. -# -# For further information on compiling NetBSD kernels, see the config(8) -# man page. -# -# For further information on hardware support for this architecture, see -# the intro(4) man page. For further information about kernel options -# for this architecture, see the options(4) man page. For an explanation -# of each device driver in this file see the section 4 man page for the -# device. +include "arch/amiga/conf/GENERIC" -include "arch/amiga/conf/std.amiga" - -options INCLUDE_CONFIG_FILE # embed config file in kernel binary - -#ident "GENERIC-$Revision: 1.106 $" - - -maxusers 8 -options RTC_OFFSET=0 - -# -# mainboards to support (in addition to Amiga) -# -options BB060STUPIDROM # You need this, if you have a non-DraCo - # MC68060 with an OS ROM up to (at least) - # V40 (OS3.1) and want to boot with the - # bootblock. - # You do not need this if you have a DraCo, - # have no 68060 or NEVER use the bootblock -options P5PPC68KBOARD # Phase5 PPC/68K board support -# -# processors this kernel should support -# -options M68060 # support for 060 -options M060SP # MC68060 software support (Required for 060) -options M68040 # support for 040 -options FPSP # MC68040 floating point support -options M68030 # support for 030 -options M68020 # support for 020/851 -options FPU_EMULATE # FPU emulation - -# -# Networking options -# -options INET # IP networking support (Required) -options INET6 # IPV6 -#options IPSEC # IP security -#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) -#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) -#options IPSEC_DEBUG # debug for IP security -#options GATEWAY # Packet forwarding -#options DIRECTED_BROADCAST # Broadcast across subnets - -#options MROUTING # Multicast routing -#options PIM # Protocol Independent Multicast -#options ISO,TPIP # OSI -#options EON # OSI tunneling over IP -options NETATALK # AppleTalk networking protocols -#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG - -options PPP_BSDCOMP # BSD-Compress compression support for PPP -options PPP_DEFLATE # Deflate compression support for PPP -options PPP_FILTER # Active filter support for PPP (requires bpf) -options PFIL_HOOKS # pfil(9) packet filter hooks -options IPFILTER_LOG # ipmon(8) log support -options IPFILTER_LOOKUP # ippool(8) support -#options IPFILTER_DEFAULT_BLOCK # block all packets by default - -#options ALTQ # Manipulate network interfaces' output queues -#options ALTQ_BLUE # Stochastic Fair Blue -#options ALTQ_CBQ # Class-Based Queueing -#options ALTQ_CDNR # Diffserv Traffic Conditioner -#options ALTQ_FIFOQ # First-In First-Out Queue -#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) -#options ALTQ_HFSC # Hierarchical Fair Service Curve -#options ALTQ_LOCALQ # Local queueing discipline -#options ALTQ_PRIQ # Priority Queueing -#options ALTQ_RED # Random Early Detection -#options ALTQ_RIO # RED with IN/OUT -#options ALTQ_WFQ # Weighted Fair Queueing - -# Filesystems -file-system FFS # Berkeley fast file system -file-system EXT2FS # second extended file system (linux) -#file-system LFS # log-structured filesystem (experimental) - -file-system MFS # Memory based filesystem - -file-system NFS # Network File System client side code -file-system ADOSFS # AmigaDOS file system -file-system CD9660 # ISO 9660 + Rock Ridge filesystem -file-system MSDOSFS # MS-DOS filesystem - -file-system KERNFS # kernel data-structure filesystem - -file-system FDESC # user file descriptor filesystem -file-system NULLFS # loopback filesystem -file-system OVERLAY # overlay filesystem -#file-system PORTAL # Portal filesystem -file-system PROCFS # /proc filesystem -file-system UMAPFS # NULLFS + uid and gid remapping -file-system UNION # union filesystem -file-system SMBFS # experimental - CIFS; also needs nsmb (below) -file-system PTYFS # /dev/pts/N support -#file-system TMPFS # Efficient memory file-system -#file-system UDF # experimental - OSTA UDF CD/DVD file-system - -# Filesystem options - -#options FFS_EI # FFS Endian Independant support - -options QUOTA # User and group quotas in FFS -options SOFTDEP # FFS soft updates support. -#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental -options NFSSERVER # Network File System server side code -#options FFS_NO_SNAPSHOT # No FFS snapshot support - -#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and - # immutable) behave as system flags. - -# -# Compatibility options for various existing systems +# Disable DraCo-specific options and devices # -#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. -options COMPAT_43 # compatibility with 4.3BSD interfaces -options COMPAT_09 # compatibility with NetBSD 0.9 -options COMPAT_10 # compatibility with NetBSD 1.0 -options COMPAT_12 # compatibility with NetBSD 1.2 -options COMPAT_13 # compatibility with NetBSD 1.3 -options COMPAT_14 # compatibility with NetBSD 1.4 -options COMPAT_15 # compatibility with NetBSD 1.5 -options COMPAT_16 # compatibility with NetBSD 1.6 -options COMPAT_20 # compatibility with NetBSD 2.0 -options COMPAT_30 # NetBSD 3.0 compatibility. -options COMPAT_40 # NetBSD 4.0 compatibility. -options COMPAT_SUNOS # Support to run Sun (m68k) executables -options COMPAT_SVR4 # Support to run SVR4 (m68k) executables -options COMPAT_NOMID # allow nonvalid machine id executables -#options COMPAT_LINUX # Support to run Linux/m68k executables +no options DRACO -options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) -options COMPAT_AOUT_M68K # actually make some system calls work. -options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. +no drbbc0 at mainbus0 # DraCo battery backed clock +no drsupio0 at mainbus0 # DraCo superio chip +no com* at drsupio? # DraCo serial +no lpt0 at drsupio? # DraCo parallel -# -# Support for System V IPC facilities. -# -options SYSVSHM # System V-like shared memory -options SYSVMSG # System V-like messages -options SYSVSEM # System V-like semaphores -#options SEMMNI=10 # number of semaphore identifiers -#options SEMMNS=60 # number of semaphores in system -#options SEMUME=10 # max number of undo entries per process -#options SEMMNU=30 # number of undo structures in system -options P1003_1B_SEMAPHORE # p1003.1b semaphore support +no drsc0 at mainbus0 # DraCo scsi +no scsibus* at drsc0 -# -# Support for various kernel options -# - -options KTRACE # system call tracing support -options LKM # Loadable kernel modules -#options SYSTRACE # system call vetting via systrace(1) -#options INSECURE # disable kernel security levels -options SCSIVERBOSE # human readable SCSI error messages -options USERCONF # userconf(4) support -options NTP # NTP phase/frequency locked loop -#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) - -# Enable experimental buffer queue strategy for better responsiveness under -# high disk I/O load. Use it with caution - it's not proven to be stable yet. -#options BUFQ_READPRIO -#options BUFQ_PRIOCSCAN - -# -# Misc. debugging options -# -options DDB # Kernel debugger -#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB -#options DIAGNOSTIC # Extra kernel sanity checks -#options DEBUG # Enable misc. kernel debugging code -#options SYSCALL_DEBUG # debug all syscalls. -#options SCSIDEBUG # Add SCSI debugging statements -#options PANICBUTTON # Forced crash via keypress (?) - -# -# Amiga specific options -# -#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the - # first bank of RAM. (default: unlimited) -#options NKPTADD=4 # set this for 4 additional KPT pages -#options NKPTADDSHIFT=24 # set this for 1 additional KPT page - # per 16 MB (1<<24 bytes) of RAM - # uncomment and decrease this, or uncomment and - # increase NKPTADD if you get "out of PT pages" - # panics. - -# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete -# before the 10 secondinterval ends, or that KBDRESET does work at all. -#options KBDRESET # sync on Ctrl-Amiga-Amiga - -# These options improve performance with the built-in serial port -# on slower Amigas. Try the larger buffers first then lev6_defer. -#options SERIBUF_SIZE=4096 -#options SEROBUF_SIZE=32 -#options LEV6_DEFER # defers l6 to l4 (below serial l5) - -#options DEVRELOAD # implement /dev/reload -# # currently only works for a.out kernels - -options RETINACONSOLE # enable code to allow retina to be console -options ULOWELLCONSOLE # enable code to allow a2410 to be console -options CL5426CONSOLE # Cirrus console -options CV64CONSOLE # CyberVision console -options TSENGCONSOLE # Tseng console -options CV3DCONSOLE # CyberVision 64/3D console - -options GRF_ECS # Enhanced Chip Set -options GRF_NTSC # NTSC -options GRF_PAL # PAL -options GRF_A2024 # Support for the A2024 -options GRF_AGA # AGA Chip Set -options GRF_AGA_VGA # AGA VGAONLY timing -options GRF_SUPER72 # AGA Super-72 -#options KFONT_8X11 # 8x11 font - -# select a font for the console according to the character set and keymap -# you want to use -options KFONT_CONS_ISO8859_1 -#options KFONT_CONS_ISO8859_2 - -# This is how you would tell the kernel the A2410 oscillator frequencies: -# The used frequencies are the defaults, and do not need option setting -#options ULOWELL_OSC1=36000000 -#options ULOWELL_OSC2=66667000 - -# This is how you specify the blitting speed, higher values may speed up blits -# a littel bit. If you raise this value too much some trash may appear. -# the commented version is the default. -#options RH_MEMCLK=61000000 -# this option enables the 64 bit sprite which does not work -# for quite a few people. E.g. The cursor sprite will turn to a block -# when moved to the top of the screen in X. -#options RH_64BIT_SPRITE -# enables fast scroll code appears to now work on 040 systems. -#options RETINA_SPEED_HACK -# enables the Hardwarecursor which does not work on some systems. -#options RH_HARDWARECURSOR - -# wscons aware interface to amiga custom chips. -# If you enable it enable also wskbd. -# - -#amidisplaycc0 at mainbus0 # wscons interface to custom chips -#wsdisplay0 at amidisplaycc0 console ? -#options WSEMUL_VT100 -#options FONT_VT220L8x10 -#options FONT_VT220ISO8x16 - -grfcc0 at mainbus0 # custom chips -grfrt0 at zbus0 # retina II -grfrh0 at zbus0 # retina III -grfcl* at zbus0 # Picasso II/Piccolo/Spectrum -grful0 at zbus0 # A2410 -grfcv0 at zbus0 # CyberVision 64 -grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) -grfcv3d0 at zbus0 # CyberVision 64/3D - -grf0 at grfcc0 -grf1 at grfrt0 -grf2 at grfrh0 -grf3 at grfcl? -grf4 at grful0 -grf5 at grfcv0 -grf6 at grfet? -grf7 at grfcv3d0 -ite0 at grf0 # terminal emulators for grfs -ite1 at grf1 # terminal emulators for grfs -ite2 at grf2 # terminal emulators for grfs -ite3 at grf3 # terminal emulators for grfs -ite4 at grf4 # terminal emulators for grfs -ite5 at grf5 # terminal emulators for grfs -ite6 at grf6 # terminal emulators for grfs -ite7 at grf7 # terminal emulators for grfs - -msc0 at zbus0 # A2232 MSC multiport serial. -mfc0 at zbus0 # MultiFaceCard I/O board -mfcs0 at mfc0 unit 0 # MFC serial -mfcs1 at mfc0 unit 1 # MFC serial -#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] -#mfc1 at zbus0 # MultiFaceCard 2nd I/O board -#mfcs2 at mfc1 unit 0 -#mfcs3 at mfc1 unit 1 -#mfcp1 at mfc1 unit 0 - -hyper* at zbus? # zbus HyperCom3/3+/4/4+ -#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 -com* at hyper? port ? # Hypercom3/4 serial ports -lpt* at hyper? port ? # Hypercom3+/4+ parallel port - -#options IOBZCLOCK=22118400 # default, uncomment the next line -#options IOBZCLOCK=24000000 # if needed. - -iobl* at zbus? # zbus IOBlix -com* at iobl? port ? # IOBlix serial ports -lpt* at iobl? port ? # IOBlix parallel ports - - -# -# Keyboard device. Optionally can attach a wskbd. -# wskbd works together with a wsdisplay so enable them both if you will. -# Don't enable wskbd if you use ite. -# -# XXX in std.amiga: kbd0 at mainbus0 - -#wskbd0 at kbd0 console ? - - -# -# Amiga Mainboard devices (sans graphics and keyboard) -# - -ser0 at mainbus0 # Amiga onboard serial -par0 at mainbus0 # Amiga onboard parallel -ms* at mainbus0 # Amiga mice -fdc0 at mainbus0 # Amiga FDC -fd* at fdc0 unit ? # floppy disks on the later -a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock -a2kbbc0 at mainbus0 # A2000 battery backed clock -aucc* at mainbus0 # Amiga CC audio -audio* at aucc? - - -#wsmouse* at ms? - - -# -# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) -# # Alas, Melody-Z2 dont configure in the DraCo bus. +# melody* at zbus0 # Melody MPEG audio decoder audio* at melody? - -repulse* at zbus0 # ALiENDESiGN Repulse -audio* at repulse? - -toccata* at zbus0 # MacroSystem GmbH Toccata -audio* at toccata? - -# Ethernet cards: -le* at zbus0 # A2065, Ameristar, Ariadne -ne* at zbus0 # AriadneII, X-surf -ed* at zbus0 # Hydra, ASDG LanRover -es* at zbus0 # CEI A4066 EthernetPLUS -qn* at zbus0 # Quicknet - -# Arcnet -bah* at zbus0 # C=/Ameristar A2060 / 560 - -# Greater Valley Product Bus -gvpbus* at zbus0 - -# scsi stuff, all possible -gtsc0 at gvpbus? # GVP series II scsi -scsibus* at gtsc0 -ahsc0 at mainbus0 # A3000 scsi -scsibus* at ahsc0 -atzsc0 at zbus0 # A2091 scsi -scsibus* at atzsc0 -wstsc0 at zbus0 # Wordsync II scsi -scsibus* at wstsc0 -ivsc0 at zbus0 # IVS scsi -scsibus* at ivsc0 -mlhsc0 at zbus0 # Hacker scsi -scsibus* at mlhsc0 -otgsc0 at zbus0 # 12 gauge scsi -scsibus* at otgsc0 -zssc0 at zbus0 # Zeus scsi -scsibus* at zssc0 -mgnsc0 at zbus0 # Magnum scsi -scsibus* at mgnsc0 -wesc0 at zbus0 # Warp Engine scsi -scsibus* at wesc0 -afsc0 at zbus0 # A4091 scsi -scsibus* at afsc0 -aftsc0 at mainbus0 # A4000T scsi -scsibus* at aftsc0 -flsc0 at zbus0 # FastlaneZ3 scsi -scsibus* at flsc0 -bzsc0 at zbus0 # Blizzard 1230 I,II scsi -scsibus* at bzsc0 -bzivsc0 at zbus0 # Blizzard 12x0 IV scsi -scsibus* at bzivsc0 -bztzsc0 at zbus0 # Blizzard 2060 scsi -scsibus* at bztzsc0 -cbsc0 at zbus0 # CyberSCSI I -scsibus* at cbsc0 -cbiisc0 at zbus0 # CyberSCSI II -scsibus* at cbiisc0 -cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI -scsibus* at cbiiisc0 -empsc0 at zbus0 # Emplant scsi -scsibus* at empsc0 - -wdc0 at mainbus0 # A4000 & A1200 IDE bus -wdc* at zbus0 # Buddha / Catweasel - -atabus* at wdc? channel ? # ATA bus -wd* at atabus? drive ? # + drives -atapibus* at atabus? # ATAPI bus -cd* at atapibus? drive ? # ATAPI CD-ROM drives -sd* at atapibus? drive ? # ATAPI disk drives - -pccard0 at mainbus0 -pcmcia* at pccard0 -com* at pcmcia? function ? # Modems and serial cards -pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards -aic* at pcmcia? function ? # Adaptec APA-1460 SCSI -wdc* at pcmcia? function ? -awi* at pcmcia? function ? # BayStack 650 (802.11FH) -ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet -mbe* at pcmcia? function ? # MB8696x based Ethernet -ne* at pcmcia? function ? # NE2000-compatible Ethernet -sm* at pcmcia? function ? # Megahertz Ethernet -mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards -com* at mhzc? -sm* at mhzc? - - - - -# each hard drive from low target to high -# will configure to the next available sd unit number -sd* at scsibus? target ? lun ? # scsi disks -st* at scsibus? target ? lun ? # scsi tapes -cd* at scsibus? target ? lun ? # scsi cds -ch* at scsibus? target ? lun ? # scsi autochangers -ss* at scsibus? target ? lun ? # scsi scanner -uk* at scsibus? target ? lun ? # scsi unknown - -pseudo-device loop # loopback network interface -pseudo-device sl # SLIP network interfaces -pseudo-device ppp # PPP network interfaces -pseudo-device pppoe # PPP over Ethernet (RFC 2516) -pseudo-device tun # network tunnel line discipline -pseudo-device tap # virtual Ethernet -#pseudo-device gre # generic L3 over IP tunnel -pseudo-device bpfilter # Berkeley packet filter -#pseudo-device carp # Common Address Redundancy Protocol -pseudo-device ipfilter # IP Filter package -pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) -#pseudo-device faith # IPv[46] tcp relay translation i/f -pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation -pseudo-device vlan # IEEE 802.1q encapsulation -pseudo-device bridge # simple inter-network bridging -#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too -pseudo-device agr # IEEE 802.3ad link aggregation -#pseudo-device pf # PF packet filter -#pseudo-device pflog # PF log if -#pseudo-device fss 4 # file system snapshot device - -pseudo-device view 4 # views (needed for grfcc) -pseudo-device pty # pseudo-terminals -pseudo-device clockctl # user control of clock subsystem - -#pseudo-device wsfont # wsfont(4) dynamic font loading support -#pseudo-device wsmux # mouse & keyboard multiplexor - -pseudo-device vnd # vnode pseudo-disks -#options VND_COMPRESSION # compressed vnd(4) -pseudo-device ccd 4 # concatenated disk devices -#pseudo-device cgd 4 # cryptographic disk devices -pseudo-device raid 8 # RAIDframe disk driver -options RAID_AUTOCONFIG # auto-configuration of RAID components -# Options to enable various other RAIDframe RAID types. -# options RF_INCLUDE_EVENODD=1 -# options RF_INCLUDE_RAID5_RS=1 -# options RF_INCLUDE_PARITYLOGGING=1 -# options RF_INCLUDE_CHAINDECLUSTER=1 -# options RF_INCLUDE_INTERDECLUSTER=1 -# options RF_INCLUDE_PARITY_DECLUSTERING=1 -# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 - -pseudo-device rnd # /dev/random and in-kernel generator -#options RND_COM # use "com" randomness as well (BROKEN) - -pseudo-device ksyms # /dev/ksyms (kernel symbols) -pseudo-device nsmb # experimental - SMB requester - -# Veriexec -# -# a pseudo device needed for veriexec -#pseudo-device veriexec 1 -# -# Uncomment the fingerprint methods below that are desired. Note that -# removing fingerprint methods will have almost no impact on the kernel -# code size. -# -#options VERIFIED_EXEC_FP_RMD160 -#options VERIFIED_EXEC_FP_SHA256 -#options VERIFIED_EXEC_FP_SHA384 -#options VERIFIED_EXEC_FP_SHA512 -#options VERIFIED_EXEC_FP_SHA1 -#options VERIFIED_EXEC_FP_MD5 - -config netbsd root on ? type ? diff --git a/sys/arch/amiga/conf/Makefile b/sys/arch/amiga/conf/Makefile index 5bb61386d772..52c28989fd0b 100644 --- a/sys/arch/amiga/conf/Makefile +++ b/sys/arch/amiga/conf/Makefile @@ -1,13 +1,11 @@ -# $NetBSD: Makefile,v 1.11 2007/09/07 10:08:35 lukem Exp $ +# $NetBSD: Makefile,v 1.12 2007/09/07 12:53:40 lukem Exp $ # -# Use this file to regenerate AMIGA, DRACO, GENERIC, INSTALL +# Use this file to regenerate DRACO, GENERIC, INSTALL # out of the GENERIC.in template. # -all: AMIGA DRACO GENERIC INSTALL - -AMIGA: __generate_config +all: DRACO GENERIC INSTALL DRACO: __generate_config diff --git a/sys/arch/amiga/conf/_READ_ME_FIRST_ b/sys/arch/amiga/conf/_READ_ME_FIRST_ index 709e483a42da..1396a55c1dd4 100644 --- a/sys/arch/amiga/conf/_READ_ME_FIRST_ +++ b/sys/arch/amiga/conf/_READ_ME_FIRST_ @@ -1,6 +1,6 @@ For those who don't read the start of the file they are changing... -Do NOT change AMIGA, DRACO, GENERIC, INSTALL! +Do NOT change DRACO, GENERIC, INSTALL! Edit GENERIC.in instead, then "make all"! Sun Aug 19 19:16:29 CEST 2007