diff --git a/sys/arch/amiga/conf/GENERIC.in b/sys/arch/amiga/conf/GENERIC.in new file mode 100644 index 000000000000..a09038133476 --- /dev/null +++ b/sys/arch/amiga/conf/GENERIC.in @@ -0,0 +1,568 @@ +# $NetBSD: GENERIC.in,v 1.1 2002/06/18 17:39:39 lukem Exp $ +# +# GENERIC machine description file +# +# This machine description file is used to generate the default NetBSD +# kernel. The generic kernel does not include all options, subsystems +# and device drivers, but should be useful for most applications. +# +# The machine description file can be customised for your specific +# machine to reduce the kernel size and improve its performance. +# +# For further information on compiling NetBSD kernels, see the config(8) +# man page. +# +# For further information on hardware support for this architecture, see +# the intro(4) man page. For further information about kernel options +# for this architecture, see the options(4) man page. For an explanation +# of each device driver in this file see the section 4 man page for the +# device. + +m4_divert(-1) +# +# GENERIC Amiga or DraCo +# +# This configuration file contains all possible options +# +# make AMIGA extracts the AMIGA configuration file. +# make DRACO extracts the DRACO configuration file. +# make GENERIC extracts the GENERIC configuration file. +# make INSTALL extracts the INSTALL configuration file. +# make WSCONS extracts the WSCONS configuration file. +# +# commit them, too. +# + +# Define XXX_CONFIGURATION +# +m4_define(M4_Target`_CONFIGURATION', `') + +# If not building AMIGA, set DRACO_CONFIGURATION +# +m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')') + +# If not building DRACO, set AMIGA_CONFIGURATION +# +m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')') + +# If building WSCONS, uncomment various options +# +m4_ifdef(`WSCONS_CONFIGURATION', `m4_define(`WSOFF', `wson')', `m4_define(`WSOFF', `wsoff')') + + +m4_divert(0)m4_dnl + +include "arch/amiga/conf/std.amiga" + +options INCLUDE_CONFIG_FILE # embed config file in kernel binary + +#ident "GENERIC-$Revision: 1.1 $" + +m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl +makeoptions COPTS="-Os" +')m4_dnl + +maxusers 8 +options RTC_OFFSET=0 + +# +# mainboards to support (in addition to Amiga) +# +m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl +options DRACO +')m4_dnl +m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl +options BB060STUPIDROM # You need this, if you have a non-DraCo + # MC68060 with an OS ROM up to (at least) + # V40 (OS3.1) and want to boot with the + # bootblock. + # You do not need this if you have a DraCo, + # have no 68060 or NEVER use the bootblock +options P5PPC68KBOARD # Phase5 PPC/68K board support +')m4_dnl +# +# processors this kernel should support +# +options M68060 # support for 060 +options M060SP # MC68060 software support (Required for 060) +m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl +options M68040 # support for 040 +options FPSP # MC68040 floating point support +options M68030 # support for 030 +options M68020 # support for 020/851 +options FPU_EMULATE # FPU emulation +')m4_dnl + +# +# Networking options +# +options INET # IP networking support (Required) +options INET6 # IPV6 +#options IPSEC # IP security +#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) +#options IPSEC_DEBUG # debug for IP security +#options GATEWAY # Packet forwarding +#options DIRECTED_BROADCAST # Broadcast across subnets + +m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl +#options MROUTING # Multicast routing +options NS # XNS +#options NSIP # XNS tunneling over IP +options ISO,TPIP # OSI +#options EON # OSI tunneling over IP +options CCITT,LLC,HDLC # X.25 +options NETATALK # AppleTalk networking protocols +#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG +')m4_dnl + +options PPP_BSDCOMP # BSD-Compress compression support for PPP +options PPP_DEFLATE # Deflate compression support for PPP +options PPP_FILTER # Active filter support for PPP (requires bpf) +options PFIL_HOOKS # pfil(9) packet filter hooks +options IPFILTER_LOG # ipmon(8) log support + +# Filesystems +file-system FFS # Berkeley fast file system +file-system EXT2FS # second extended file system (linux) +#file-system LFS # log-structured filesystem (experimental) + +m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl +file-system MFS # Memory based filesystem +')m4_dnl + +file-system NFS # Network File System client side code +file-system ADOSFS # AmigaDOS file system +file-system CD9660 # ISO 9660 + Rock Ridge filesystem +file-system MSDOSFS # MS-DOS filesystem + +file-system KERNFS # kernel data-structure filesystem + +m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl +file-system FDESC # user file descriptor filesystem +file-system NULLFS # loopback filesystem +file-system OVERLAY # overlay filesystem +#file-system PORTAL # Portal filesystem +file-system PROCFS # /proc filesystem +file-system UMAPFS # NULLFS + uid and gid remapping +file-system UNION # union filesystem +')m4_dnl + +# Filesystem options + +#options FFS_EI # FFS Endian Independant support + +m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl +options QUOTA # User and group quotas in FFS +options SOFTDEP # FFS soft updates support. +options NFSSERVER # Network File System server side code +')m4_dnl + +#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and + # immutable) behave as system flags. + +# +# Compatibility options for various existing systems +# + +m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl +#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. +options COMPAT_43 # compatibility with 4.3BSD interfaces +options COMPAT_09 # compatibility with NetBSD 0.9 +options COMPAT_10 # compatibility with NetBSD 1.0 +options COMPAT_12 # compatibility with NetBSD 1.2 +options COMPAT_13 # compatibility with NetBSD 1.3 +options COMPAT_14 # compatibility with NetBSD 1.4 +options COMPAT_SUNOS # Support to run Sun (m68k) executables +options COMPAT_SVR4 # Support to run SVR4 (m68k) executables +options COMPAT_NOMID # allow nonvalid machine id executables +#options COMPAT_LINUX # Support to run Linux/m68k executables +')m4_dnl + +options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) +options COMPAT_AOUT_M68K # actually make some system calls work. + +m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl +# +# Support for System V IPC facilities. +# +options SYSVSHM # System V-like shared memory +options SYSVMSG # System V-like messages +options SYSVSEM # System V-like semaphores +#options SEMMNI=10 # number of semaphore identifiers +#options SEMMNS=60 # number of semaphores in system +#options SEMUME=10 # max number of undo entries per process +#options SEMMNU=30 # number of undo structures in system +')m4_dnl + +# +# Support for various kernel options +# + +m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl +options KTRACE # system call tracing support +options LKM # Loadable kernel modules +options UCONSOLE # anyone can redirect a virtual console +')m4_dnl +#options INSECURE # disable kernel security levels +options SCSIVERBOSE # human readable SCSI error messages +#options USERCONF # userconf(4) support +m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl +options PIPE_SOCKETPAIR # smaller, but slower pipe(2) +', `m4_dnl +options NTP # NTP phase/frequency locked loop +#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) +')m4_dnl + +# +# Misc. debugging options +# +options DDB # Kernel debugger +#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB +options DIAGNOSTIC # Extra kernel sanity checks +#options DEBUG # Enable misc. kernel debugging code +#options SYSCALL_DEBUG # debug all syscalls. +#options SCSIDEBUG # Add SCSI debugging statements +#options PANICBUTTON # Forced crash via keypress (?) + +# +# Amiga specific options +# +#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the + # first bank of RAM. (default: unlimited) +#options NKPTADD=4 # set this for 4 additional KPT pages +#options NKPTADDSHIFT=24 # set this for 1 additional KPT page + # per 16 MB (1<<24 bytes) of RAM + # uncomment and decrease this, or uncomment and + # increase NKPTADD if you get "out of PT pages" + # panics. + +# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete +# before the 10 secondinterval ends, or that KBDRESET does work at all. +#options KBDRESET # sync on Ctrl-Amiga-Amiga + +# These options improve performance with the built-in serial port +# on slower Amigas. Try the larger buffers first then lev6_defer. +#options SERIBUF_SIZE=4096 +#options SEROBUF_SIZE=32 +#options LEV6_DEFER # defers l6 to l4 (below serial l5) + +options RETINACONSOLE # enable code to allow retina to be console +m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl +options ULOWELLCONSOLE # enable code to allow a2410 to be console +options CL5426CONSOLE # Cirrus console +options CV64CONSOLE # CyberVision console +options TSENGCONSOLE # Tseng console +options CV3DCONSOLE # CyberVision 64/3D console + +options GRF_ECS # Enhanced Chip Set +options GRF_NTSC # NTSC +options GRF_PAL # PAL +options GRF_A2024 # Support for the A2024 +options GRF_AGA # AGA Chip Set +options GRF_AGA_VGA # AGA VGAONLY timing +options GRF_SUPER72 # AGA Super-72 +')m4_dnl +#options KFONT_8X11 # 8x11 font + +# select a font for the console according to the character set and keymap +# you want to use +options KFONT_CONS_ISO8859_1 +#options KFONT_CONS_ISO8859_2 + +# This is how you would tell the kernel the A2410 oscillator frequencies: +# The used frequencies are the defaults, and do not need option setting +#options ULOWELL_OSC1=36000000 +#options ULOWELL_OSC2=66667000 + +# This is how you specify the blitting speed, higher values may speed up blits +# a littel bit. If you raise this value too much some trash may appear. +# the commented version is the default. +#options RH_MEMCLK=61000000 +# this option enables the 64 bit sprite which does not work +# for quite a few people. E.g. The cursor sprite will turn to a block +# when moved to the top of the screen in X. +#options RH_64BIT_SPRITE +# enables fast scroll code appears to now work on 040 systems. +#options RETINA_SPEED_HACK +# enables the Hardwarecursor which does not work on some systems. +#options RH_HARDWARECURSOR + +m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl +# wscons aware interface to amiga custom chips. +# If you enable it enable also wskbd. +# +m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl +amidisplaycc0 at mainbus0 # wscons interface to custom chips +wsdisplay0 at amidisplaycc0 console ? +options WSEMUL_VT100 +options FONT_BOLD8x16 +options FONT_VT220L8x10 +', ` +#amidisplaycc0 at mainbus0 # wscons interface to custom chips +#wsdisplay0 at amidisplaycc0 console ? +#options WSEMUL_VT100 +#options FONT_BOLD8x16 +#options FONT_VT220L8x10 +')m4_dnl +')m4_dnl + +m4_ifdef(`WSCONS_CONFIGURATION', `', `m4_dnl +m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl +grfcc0 at mainbus0 # custom chips +grfrt0 at zbus0 # retina II +')m4_dnl +grfrh0 at zbus0 # retina III +m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl +grfcl* at zbus0 # Picasso II/Piccolo/Spectrum +grful0 at zbus0 # A2410 +grfcv0 at zbus0 # CyberVision 64 +grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) +grfcv3d0 at zbus0 # CyberVision 64/3D +')m4_dnl + +m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl +grf0 at grfcc0 +grf1 at grfrt0 +')m4_dnl +grf2 at grfrh0 +m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl +grf3 at grfcl? +grf4 at grful0 +grf5 at grfcv0 +grf6 at grfet? +grf7 at grfcv3d0 +ite0 at grf0 # terminal emulators for grfs +ite1 at grf1 # terminal emulators for grfs +')m4_dnl +ite2 at grf2 # terminal emulators for grfs +m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl +ite3 at grf3 # terminal emulators for grfs +ite4 at grf4 # terminal emulators for grfs +ite5 at grf5 # terminal emulators for grfs +ite6 at grf6 # terminal emulators for grfs +ite7 at grf7 # terminal emulators for grfs +')m4_dnl +')m4_dnl + +msc0 at zbus0 # A2232 MSC multiport serial. +mfc0 at zbus0 # MultiFaceCard I/O board +mfcs0 at mfc0 unit 0 # MFC serial +mfcs1 at mfc0 unit 1 # MFC serial +#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] +#mfc1 at zbus0 # MultiFaceCard 2nd I/O board +#mfcs2 at mfc1 unit 0 +#mfcs3 at mfc1 unit 1 +#mfcp1 at mfc1 unit 0 + +hyper* at zbus? # zbus HyperCom3/3+/4/4+ +#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 +com* at hyper? port ? # Hypercom3/4 serial ports +lpt* at hyper? port ? # Hypercom3+/4+ parallel port + +#options IOBZCLOCK=22118400 # default, uncomment the next line +#options IOBZCLOCK=24000000 # if needed. + +iobl* at zbus? # zbus IOBlix +com* at iobl? port ? # IOBlix serial ports +lpt* at iobl? port ? # IOBlix parallel ports + + +# +# Keyboard device. Optionally can attach a wskbd. +# wskbd works together with a wsdisplay so enable them both if you will. +# Don't enable wskbd if you use ite. +# +# XXX in std.amiga: kbd0 at mainbus0 +m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl +wskbd0 at kbd0 console ? +', ` +#wskbd0 at kbd0 console ? +')m4_dnl + + +m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl +# +# Amiga Mainboard devices (sans graphics and keyboard) +# + +ser0 at mainbus0 # Amiga onboard serial +par0 at mainbus0 # Amiga onboard parallel +ms* at mainbus0 # Amiga mice +fdc0 at mainbus0 # Amiga FDC +fd* at fdc0 unit ? # floppy disks on the later +a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock +a2kbbc0 at mainbus0 # A2000 battery backed clock +m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl +aucc* at mainbus0 # Amiga CC audio +audio* at aucc? +')m4_dnl +')m4_dnl + +m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl +# +# DraCo Mainboard devices (sans keyboard) +# + +drbbc0 at mainbus0 # DraCo battery backed clock +drsupio0 at mainbus0 # DraCo superio chip +com* at drsupio? port ? # DraCo serial +lpt0 at drsupio? port ? # DraCo parallel +')m4_dnl + +# +# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) +# + +m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl +m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl +# Alas, Melody-Z2 dont configure in the DraCo bus. +melody* at zbus0 # Melody MPEG audio decoder +audio* at melody? +')m4_dnl + +repulse* at zbus0 # ALiENDESiGN Repulse +audio* at repulse? + +toccata* at zbus0 # MacroSystem GmbH Toccata +audio* at toccata? +')m4_dnl + +# Ethernet cards: +le* at zbus0 # A2065, Ameristar, Ariadne +ne* at zbus0 # AriadneII, X-surf +ed* at zbus0 # Hydra, ASDG LanRover +es* at zbus0 # CEI A4066 EthernetPLUS +qn* at zbus0 # Quicknet + +# Arcnet +bah* at zbus0 # C=/Ameristar A2060 / 560 + +m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl +# Greater Valley Product Bus +gvpbus* at zbus0 + +# scsi stuff, all possible +gtsc0 at gvpbus? # GVP series II scsi +scsibus* at gtsc0 +ahsc0 at mainbus0 # A3000 scsi +scsibus* at ahsc0 +atzsc0 at zbus0 # A2091 scsi +scsibus* at atzsc0 +wstsc0 at zbus0 # Wordsync II scsi +scsibus* at wstsc0 +ivsc0 at zbus0 # IVS scsi +scsibus* at ivsc0 +mlhsc0 at zbus0 # Hacker scsi +scsibus* at mlhsc0 +otgsc0 at zbus0 # 12 gauge scsi +scsibus* at otgsc0 +zssc0 at zbus0 # Zeus scsi +scsibus* at zssc0 +mgnsc0 at zbus0 # Magnum scsi +scsibus* at mgnsc0 +wesc0 at zbus0 # Warp Engine scsi +scsibus* at wesc0 +afsc0 at zbus0 # A4091 scsi +scsibus* at afsc0 +aftsc0 at mainbus0 # A4000T scsi +scsibus* at aftsc0 +flsc0 at zbus0 # FastlaneZ3 scsi +scsibus* at flsc0 +bzsc0 at zbus0 # Blizzard 1230 I,II scsi +scsibus* at bzsc0 +bzivsc0 at zbus0 # Blizzard 12x0 IV scsi +scsibus* at bzivsc0 +bztzsc0 at zbus0 # Blizzard 2060 scsi +scsibus* at bztzsc0 +cbsc0 at zbus0 # CyberSCSI I +scsibus* at cbsc0 +cbiisc0 at zbus0 # CyberSCSI II +scsibus* at cbiisc0 +cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI +scsibus* at cbiiisc0 +empsc0 at zbus0 # Emplant scsi +scsibus* at empsc0 +#idesc0 at mainbus0 # A4000 & A1200 IDE +#scsibus* at idesc0 + +# <<< comment out the wdc/atapibus entries below if the idesc lines above >>> +# <<< are uncommented >>> +wdc0 at mainbus0 # A4000 & A1200 IDE bus +wd* at wdc? drive ? # + drives +atapibus* at wdc? channel ? # ATAPI bus +cd* at atapibus? drive ? # ATAPI CD-ROM drives +sd* at atapibus? drive ? # ATAPI disk drives + +pccard0 at mainbus0 +pcmcia* at pccard0 +com* at pcmcia? function ? # Modems and serial cards +pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards +aic* at pcmcia? function ? # Adaptec APA-1460 SCSI +wdc* at pcmcia? function ? +awi* at pcmcia? function ? # BayStack 650 (802.11FH) +ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet +mbe* at pcmcia? function ? # MB8696x based Ethernet +ne* at pcmcia? function ? # NE2000-compatible Ethernet +sm* at pcmcia? function ? # Megahertz Ethernet +mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards +com* at mhzc? +sm* at mhzc? + +')m4_dnl + +m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl +drsc0 at mainbus0 # DraCo scsi +scsibus* at drsc0 +')m4_dnl + + +# each hard drive from low target to high +# will configure to the next available sd unit number +sd* at scsibus? target ? lun ? # scsi disks +st* at scsibus? target ? lun ? # scsi tapes +cd* at scsibus? target ? lun ? # scsi cds +ch* at scsibus? target ? lun ? # scsi autochangers +m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl +ss* at scsibus? target ? lun ? # scsi scanner +uk* at scsibus? target ? lun ? # scsi unknown +')m4_dnl + +pseudo-device loop # loopback network interface +pseudo-device sl 1 # SLIP network interfaces +pseudo-device ppp 1 # PPP network interfaces +pseudo-device pppoe # PPP over Ethernet (RFC 2516) +pseudo-device tun 1 # network tunnel line discipline +#pseudo-device gre 2 # generic L3 over IP tunnel +pseudo-device bpfilter 16 # Berkeley packet filter +pseudo-device ipfilter # IP Filter package +pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) +#pseudo-device faith 1 # IPv[46] tcp relay translation i/f +#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation +pseudo-device vlan # IEEE 802.1q encapsulation +pseudo-device bridge # simple inter-network bridging + +pseudo-device view 4 # views (needed for grfcc) +m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl +pseudo-device pty 2 # pseudo-terminals +', `m4_dnl +pseudo-device pty # pseudo-terminals +')m4_dnl +pseudo-device clockctl # user control of clock subsystem + +pseudo-device vnd 4 # vnode pseudo-disks +pseudo-device ccd 4 # concatenated disk devices +pseudo-device raid 8 # RAIDframe disk driver +options RAID_AUTOCONFIG # auto-configuration of RAID components +# Options to enable various other RAIDframe RAID types. +# options RF_INCLUDE_EVENODD=1 +# options RF_INCLUDE_RAID5_RS=1 +# options RF_INCLUDE_PARITYLOGGING=1 +# options RF_INCLUDE_CHAINDECLUSTER=1 +# options RF_INCLUDE_INTERDECLUSTER=1 +# options RF_INCLUDE_PARITY_DECLUSTERING=1 +# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 + +pseudo-device rnd # /dev/random and in-kernel generator +#options RND_COM # use "com" randomness as well (BROKEN) + +config netbsd root on ? type ? diff --git a/sys/arch/amiga/conf/Makefile b/sys/arch/amiga/conf/Makefile index c65c8b83bf6d..538774205ef1 100644 --- a/sys/arch/amiga/conf/Makefile +++ b/sys/arch/amiga/conf/Makefile @@ -1,81 +1,30 @@ -# $NetBSD: Makefile,v 1.9 2002/03/13 20:23:44 jandberg Exp $ +# $NetBSD: Makefile,v 1.10 2002/06/18 17:39:39 lukem Exp $ # -# Use this file to regenerate AMIGA and DRACO out of the GENERIC template. +# Use this file to regenerate AMIGA, DRACO, GENERIC, INSTALL and WSCONS +# out of the GENERIC.in template. # -all: AMIGA DRACO INSTALL WSCONS +all: AMIGA DRACO GENERIC INSTALL WSCONS -AMIGA: GENERIC - @echo Generating AMIGA... - @echo -n '# '$$ > $@ - @echo NetBSD$$ >> $@ - @echo '#' >> $@ - @echo '# This file was automatically created. Changes will be' >> $@ - @echo '# lost when running make in this directory.' >> $@ - @echo '#' >> $@ - @echo -n '# Created from: ' >> $@ - @sed -e '1s/$$NetBSD/NetBSD/' GENERIC |\ - cpp -undef -P -DAMIGA_CONFIGURATION 2>/dev/null |\ - sed -e 's/\([ ][ ]*\)\#\([^ ]\)/\1# \2/' |\ - awk '{if (NF>1)count=0;else count++;if(count<=1)print}' >> $@ +AMIGA: __generate_config -DRACO: GENERIC - @echo Generating DRACO... - @echo -n '# '$$ > $@ - @echo NetBSD$$ >> $@ - @echo '#' >> $@ - @echo '# This file was automatically created. Changes will be' >> $@ - @echo '# lost when running make in this directory.' >> $@ - @echo '#' >> $@ - @echo -n '# Created from: ' >> $@ - @sed -e '1s/$$NetBSD/NetBSD/' GENERIC |\ - cpp -undef -P -DDRACO_CONFIGURATION 2>/dev/null |\ - sed -e 's/\([ ][ ]*\)\#\([^ ]\)/\1# \2/' |\ - awk '{if (NF>1)count=0;else count++;if(count<=1)print}' >> $@ +DRACO: __generate_config -INSTALL: GENERIC - @echo Generating INSTALL... - @echo -n '# '$$ > $@ - @echo NetBSD$$ >> $@ - @echo '#' >> $@ - @echo '# This file was automatically created. Changes will be' >> $@ - @echo '# lost when running make in this directory.' >> $@ - @echo '#' >> $@ - @echo -n '# Created from: ' >> $@ - @sed -e '1s/$$NetBSD/NetBSD/' \ - -e 's/ pty / pty 2 /' GENERIC |\ - cpp -undef -P \ - -DAMIGA_CONFIGURATION -DDRACO_CONFIGURATION \ - -DINSTALL_CONFIGURATION 2>/dev/null |\ - sed -e 's/\([ ][ ]*\)\#\([^ ]\)/\1# \2/' |\ - awk '{if (NF>1)count=0;else count++;if(count<=1)print}' >> $@ +GENERIC: __generate_config -# -# Generate WSCONS by uncommenting needed things and commenting -# out ite. -# -WSCONS: GENERIC - @echo Generating $@ ... - @echo -n '# '$$ > $@ - @echo NetBSD$$ >> $@ - @echo '#' >> $@ - @echo '# This file was automatically created. Changes will be' >> $@ - @echo '# lost when running make in this directory.' >> $@ - @echo '#' >> $@ - @echo -n '# Created from: ' >> $@ - @cat GENERIC | \ - sed -e 's/^ite/#ite/' | \ - sed -e 's/^grf/#grf/' | \ - sed -e 's/^#ws/ws/' | \ - sed -e 's/^#amidisplay/amidisplay/' | \ - sed -e 's/^#\(options.*[[:<:]]WS.*\)/\1/' | \ - sed -e 's/^#\(options.*[[:<:]]FONT_.*\)/\1/' | \ - cpp -undef -P 2>/dev/null \ - -DAMIGA_CONFIGURATION \ - -DDRACO_CONFIGURATION | \ - sed -e '1s/$$NetBSD/NetBSD/' | \ - awk '{if (NF>1)count=0;else count++;if(count<=1)print}' | \ - cat >>$@ +INSTALL: __generate_config -AMIGA DRACO INSTALL WSCONS: GENERIC Makefile +WSCONS: __generate_config + +__generate_config: .USE GENERIC.in Makefile + @echo Generating ${.TARGET}... + @echo -n '# '$$ > ${.TARGET} + @echo NetBSD$$ >> ${.TARGET} + @echo '#' >> ${.TARGET} + @echo '# This file was automatically created.' >> ${.TARGET} + @echo '# Changes will be lost when make is run in this directory.' >> ${.TARGET} + @echo '#' >> ${.TARGET} + @echo -n '# Created from: ' >> ${.TARGET} + sed -e '1s/$$NetBSD/NetBSD/' GENERIC.in |\ + m4 -P -DM4_Target=${.TARGET} >> ${.TARGET}