From bff757a269137ab885e1da655e7df8fc89a21c83 Mon Sep 17 00:00:00 2001 From: cube Date: Thu, 11 Jan 2007 00:00:41 +0000 Subject: [PATCH] Remove netiso/if_cons.c. It depends on x25 stuff that was removed a while ago. Obsolete option "TPCONS". --- sys/conf/files | 3 +- sys/netiso/files.netiso | 5 +- sys/netiso/if_cons.c | 973 ---------------------------------------- 3 files changed, 4 insertions(+), 977 deletions(-) delete mode 100644 sys/netiso/if_cons.c diff --git a/sys/conf/files b/sys/conf/files index 88251b7a3ba9..40b0b863653d 100644 --- a/sys/conf/files +++ b/sys/conf/files @@ -1,4 +1,4 @@ -# $NetBSD: files,v 1.824 2007/01/09 19:19:09 cube Exp $ +# $NetBSD: files,v 1.825 2007/01/11 00:00:41 cube Exp $ # @(#)files.newconf 7.5 (Berkeley) 5/10/93 @@ -170,6 +170,7 @@ obsolete defflag HDLC # obsolete obsolete defflag LLC # obsolete obsolete defflag opt_ns.h NS NSIP # obsolete obsolete defflag IPX # obsolete +obsolete defflag opt_iso.h TPCONS defflag PFIL_HOOKS # pfil(9) defflag opt_bridge_ipf.h BRIDGE_IPF # bridge(4) use inet_pfil_hooks defflag opt_ppp.h PPP_DEFLATE PPP_BSDCOMP PPP_FILTER diff --git a/sys/netiso/files.netiso b/sys/netiso/files.netiso index 7acf4bdc1c6d..2c0bb9f448e5 100644 --- a/sys/netiso/files.netiso +++ b/sys/netiso/files.netiso @@ -1,6 +1,6 @@ -# $NetBSD: files.netiso,v 1.3 2005/12/11 12:25:12 christos Exp $ +# $NetBSD: files.netiso,v 1.4 2007/01/11 00:00:41 cube Exp $ -defflag opt_iso.h ISO TPIP TPCONS # ISO network stack +defflag opt_iso.h ISO TPIP # ISO network stack defflag EON # # ISO clnp over IP file netiso/clnp_debug.c iso @@ -17,7 +17,6 @@ file netiso/cltp_usrreq.c iso file netiso/esis.c iso file netiso/idrp_usrreq.c iso file netiso/if_eon.c eon -file netiso/if_cons.c iso file netiso/iso.c iso file netiso/iso_chksum.c iso diff --git a/sys/netiso/if_cons.c b/sys/netiso/if_cons.c deleted file mode 100644 index f3f5fb345c7e..000000000000 --- a/sys/netiso/if_cons.c +++ /dev/null @@ -1,973 +0,0 @@ -/* $NetBSD: if_cons.c,v 1.19 2006/09/07 02:40:33 dogcow Exp $ */ - -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)if_cons.c 8.1 (Berkeley) 6/10/93 - */ - -/*********************************************************** - Copyright IBM Corporation 1987 - - All Rights Reserved - -Permission to use, copy, modify, and distribute this software and its -documentation for any purpose and without fee is hereby granted, -provided that the above copyright notice appear in all copies and that -both that copyright notice and this permission notice appear in -supporting documentation, and that the name of IBM not be -used in advertising or publicity pertaining to distribution of the -software without specific, written prior permission. - -IBM DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING -ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL -IBM BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR -ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -SOFTWARE. - -******************************************************************/ - -/* - * ARGO Project, Computer Sciences Dept., University of Wisconsin - Madison - */ -/* - * cons.c - Connection Oriented Network Service: - * including support for a) user transport-level service, - * b) COSNS below CLNP, and c) CONS below TP. - */ - -#include -__KERNEL_RCSID(1, "$NetBSD: if_cons.c,v 1.19 2006/09/07 02:40:33 dogcow Exp $"); - -#include "opt_iso.h" - -#ifdef TPCONS -#ifdef _KERNEL -#ifdef ARGO_DEBUG -#define Static -unsigned LAST_CALL_PCB; -#else /* ARGO_DEBUG */ -#define Static static -#endif /* ARGO_DEBUG */ - -#ifndef SOCK_STREAM -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#endif - -#ifdef ARGO_DEBUG -#define MT_XCONN 0x50 -#define MT_XCLOSE 0x51 -#define MT_XCONFIRM 0x52 -#define MT_XDATA 0x53 -#define MT_XHEADER 0x54 -#else -#define MT_XCONN MT_DATA -#define MT_XCLOSE MT_DATA -#define MT_XCONFIRM MT_DATA -#define MT_XDATA MT_DATA -#define MT_XHEADER MT_HEADER -#endif /* ARGO_DEBUG */ - -#define DONTCLEAR -1 - -/********************************************************************* - * cons.c - CONS interface to the x.25 layer - * - * TODO: figure out what resources we might run out of besides mbufs. - * If we run out of any of them (including mbufs) close and recycle - * lru x% of the connections, for some parameter x. - * - * There are 2 interfaces from above: - * 1) from TP0: - * cons CO network service - * TP associates a transport connection with a network connection. - * cons_output( isop, m, len, isdgm==0 ) - * co_flags == 0 - * 2) from TP4: - * It's a datagram service, like clnp is. - even though it calls - * cons_output( isop, m, len, isdgm==1 ) - * it eventually goes through - * cosns_output(ifp, m, dst). - * TP4 permits multiplexing (reuse, possibly simultaneously) of the - * network connections. - * This means that many sockets (many tpcbs) may be associated with - * this pklcd, hence cannot have a back ptr from pklcd to a tpcb. - * co_flags & CONSF_DGM - * co_socket is null since there may be many sockets that use this pklcd. - * NOTE: - * streams would really be nice. sigh. - * NOTE: - * PVCs could be handled by config-ing a cons with an address and with the - * IFF_POINTTOPOINT flag on. This code would then have to skip the - * connection setup stuff for pt-to-pt links. - * - *********************************************************************/ - - -#define CONS_IFQMAXLEN 5 - -Static int make_partial_x25_packet (struct isopcb *, struct pklcd *); -Static int NSAPtoDTE (struct sockaddr_iso *, struct sockaddr_x25 *); -Static int FACILtoNSAP (struct sockaddr_iso *, const u_char *); -Static void init_siso (struct sockaddr_iso *); -Static int DTEtoNSAP (struct sockaddr_iso *, struct sockaddr_x25 *); -Static int parse_facil (struct pklcd *, struct isopcb *, caddr_t, u_char); - -/* protosw pointers for getting to higher layer */ -Static const struct protosw *CLNP_proto; -Static const struct protosw *TP_proto; -Static const struct protosw *X25_proto; - -extern struct isopcb tp_isopcb; /* chain of all TP pcbs */ - - -#define HIGH_NIBBLE 1 -#define LOW_NIBBLE 0 - -/* - * NAME: nibble_copy() - * FUNCTION and ARGUMENTS: - * copies (len) nibbles from (src_octet), high or low nibble - * to (dst_octet), high or low nibble, - * src_nibble & dst_nibble should be: - * HIGH_NIBBLE (1) if leftmost 4 bits/ most significant nibble - * LOW_NIBBLE (0) if rightmost 4 bits/ least significant nibble - * RETURNS: VOID - */ -void -nibble_copy(char *src_octet, unsigned int src_nibble, char *dst_octet, - unsigned int dst_nibble, int len) -{ - - int i; - unsigned int dshift, sshift; - -#ifdef ARGO_DEBUG - if (argo_debug[D_CADDR]) { - printf("nibble_copy ( %p, %#x, %p, %#x %#x)\n", - src_octet, src_nibble, dst_octet, dst_nibble, len); - } -#endif -#define SHIFT 0x4 - - dshift = dst_nibble << 2; - sshift = src_nibble << 2; - - for (i = 0; i < len; i++) { - /* clear dst_nibble */ - *dst_octet &= ~(0xf << dshift); - - /* set dst nibble */ - *dst_octet |= (0xf & (*src_octet >> sshift)) << dshift; - - dshift ^= SHIFT; - sshift ^= SHIFT; - src_nibble = 1 - src_nibble; - dst_nibble = 1 - dst_nibble; - src_octet += src_nibble; - dst_octet += dst_nibble; - } -#ifdef ARGO_DEBUG - if (argo_debug[D_CADDR]) { - printf("nibble_copy DONE\n"); - } -#endif -} - -/* - * NAME: nibble_match() - * FUNCTION and ARGUMENTS: - * compares src_octet/src_nibble and dst_octet/dst_nibble for len nibbles. - * RETURNS: 0 if they differ, 1 if they are the same. - */ -int -nibble_match(char *src_octet, unsigned int src_nibble, char *dst_octet, - unsigned int dst_nibble, int len) -{ - - int i; - u_int dshift, sshift; - u_char nibble_a, nibble_b; - -#ifdef ARGO_DEBUG - if (argo_debug[D_CADDR]) { - printf("nibble_match ( %p, %#x, %p, %#x %#x)\n", - src_octet, src_nibble, dst_octet, dst_nibble, len); - } -#endif -#define SHIFT 0x4 - - dshift = dst_nibble << 2; - sshift = src_nibble << 2; - - for (i = 0; i < len; i++) { - nibble_b = ((*dst_octet) >> dshift) & 0xf; - nibble_a = (0xf & (*src_octet >> sshift)); - if (nibble_b != nibble_a) - return 0; - - dshift ^= SHIFT; - sshift ^= SHIFT; - src_nibble = 1 - src_nibble; - dst_nibble = 1 - dst_nibble; - src_octet += src_nibble; - dst_octet += dst_nibble; - } -#ifdef ARGO_DEBUG - if (argo_debug[D_CADDR]) { - printf("nibble_match DONE\n"); - } -#endif - return 1; -} - -/* - **************************** NET PROTOCOL cons *************************** - */ -/* - * NAME: cons_init() - * CALLED FROM: - * autoconf - * FUNCTION: - * initialize the protocol - */ -void -cons_init(void) -{ - CLNP_proto = pffindproto(AF_ISO, ISOPROTO_CLNP, SOCK_DGRAM); - X25_proto = pffindproto(AF_ISO, ISOPROTO_X25, SOCK_STREAM); - TP_proto = pffindproto(AF_ISO, ISOPROTO_TP0, SOCK_SEQPACKET); -#ifdef ARGO_DEBUG - if (argo_debug[D_CCONS]) { - printf("cons_init end : cnlp_proto %p cons proto %p" - " tp proto %p\n", CLNP_proto, X25_proto, TP_proto); - } -#endif -#ifdef notdef - pk_protolisten(0x81, 0, clnp_incoming); - pk_protolisten(0x82, 0, esis_incoming); - pk_protolisten(0x84, 0, tp8878_A_incoming); - pk_protolisten(0, 0, tp_incoming); -#endif -} - -int -tp_incoming(struct mbuf *m, void *v) -{ - struct pklcd *lcp = v; - struct isopcb *isop; - - if (iso_pcballoc(NULL, &tp_isopcb)) { - pk_close(lcp); - return 0; - } - isop = tp_isopcb.isop_next; - lcp->lcd_upper = cons_tpinput; - lcp->lcd_upnext = (caddr_t) isop; - lcp->lcd_send(lcp); /* Confirms call */ - isop->isop_chan = (caddr_t) lcp; - isop->isop_laddr = &isop->isop_sladdr; - isop->isop_faddr = &isop->isop_sfaddr; - DTEtoNSAP(isop->isop_laddr, &lcp->lcd_laddr); - DTEtoNSAP(isop->isop_faddr, &lcp->lcd_faddr); - parse_facil(lcp, isop, &(mtod(m, struct x25_packet *)->packet_data), - m->m_pkthdr.len - PKHEADERLN); - return 0; -} - -int -cons_tpinput(struct mbuf *m0, void *v) -{ - struct pklcd *lcp = v; - struct isopcb *isop = (struct isopcb *) lcp->lcd_upnext; - int cmd, ptype = PK_CLEAR; - - if (isop == 0) - return 0; - if (m0 == 0) - goto dead; - switch (m0->m_type) { - case MT_DATA: - case MT_OOBDATA: - tpcons_input(m0, isop->isop_faddr, isop->isop_laddr, - (caddr_t) lcp); - return 0; - - case MT_CONTROL: - switch (ptype = pk_decode(mtod(m0, struct x25_packet *))) { - - case PK_RR: - cmd = PRC_CONS_SEND_DONE; - break; - - case PK_CALL_ACCEPTED: - if (lcp->lcd_sb.sb_mb) - lcp->lcd_send(lcp); /* XXX - fix this */ - /* FALLTHROUGH */ - default: - return 0; - - dead: - case PK_CLEAR: - case PK_CLEAR_CONF: - lcp->lcd_upper = 0; - lcp->lcd_upnext = 0; - isop->isop_chan = 0; - case PK_RESET: - cmd = PRC_ROUTEDEAD; - } - tpcons_ctlinput(cmd, (struct sockaddr *) isop->isop_faddr, - isop); - if (cmd == PRC_ROUTEDEAD && isop->isop_refcnt == 0) - iso_pcbdetach(isop); - } - return 0; -} - -/* - * NAME: cons_connect() - * CALLED FROM: - * tpcons_pcbconnect() when opening a new connection. - * FUNCTION anD ARGUMENTS: - * Figures out which device to use, finding a route if one doesn't - * already exist. - * RETURN VALUE: - * returns E* - */ -int -cons_connect(struct isopcb *isop) -{ - struct pklcd *lcp = (struct pklcd *) isop->isop_chan; - int error; - -#ifdef ARGO_DEBUG - if (argo_debug[D_CCONN]) { - printf("cons_connect(%p): ", isop); - dump_isoaddr(isop->isop_faddr); - printf("myaddr: "); - dump_isoaddr(isop->isop_laddr); - printf("\n"); - } -#endif - NSAPtoDTE(isop->isop_faddr, &lcp->lcd_faddr); - lcp->lcd_upper = cons_tpinput; - lcp->lcd_upnext = (caddr_t) isop; -#ifdef ARGO_DEBUG - if (argo_debug[D_CCONN]) { - printf( - "calling make_partial_x25_packet( %p, %p, %#x)\n", - &lcp->lcd_faddr, &lcp->lcd_laddr, - isop->isop_socket->so_proto->pr_protocol); - } -#endif - if ((error = make_partial_x25_packet(isop, lcp)) == 0) - error = pk_connect(lcp, &lcp->lcd_faddr); - return error; -} - -/* - **************************** DEVICE cons *************************** - */ - - -/* - * NAME: cons_ctlinput() CALLED FROM: lower layer when ECN_CLEAR - * occurs : this routine is here for consistency - cons subnet service calls - * its higher layer through the protosw entry. FUNCTION & ARGUMENTS: cmd is a - * PRC_* command, list found in ../sys/protosw.h copcb is the obvious. This - * serves the higher-layer cons service. NOTE: this takes 3rd arg. because - * cons uses it to inform itself of things (timeouts, etc) but has a pcb - * instead of an address. - */ -void * -cons_ctlinput(int cmd, struct sockaddr *sa, void *v) -{ - return NULL; -} - - -int -find_error_reason(struct x25_packet *xp) -{ - int error, cause = 0; - - if (xp) { - cause = 4[(char *) xp]; - switch (cause) { - case 0x00: - case 0x80: - /* DTE originated; look at the diagnostic */ - error = (CONL_ERROR_MASK | cause); - goto done; - - case 0x01: /* number busy */ - case 0x81: - case 0x09: /* Out of order */ - case 0x89: - case 0x11: /* Remot Procedure Error */ - case 0x91: - case 0x19: /* reverse charging accept not subscribed */ - case 0x99: - case 0x21: /* Incampat destination */ - case 0xa1: - case 0x29: /* fast select accept not subscribed */ - case 0xa9: - case 0x39: /* ship absent */ - case 0xb9: - case 0x03: /* invalid facil request */ - case 0x83: - case 0x0b: /* access barred */ - case 0x8b: - case 0x13: /* local procedure error */ - case 0x93: - case 0x05: /* network congestion */ - case 0x85: - case 0x8d: /* not obtainable */ - case 0x0d: - case 0x95: /* RPOA out of order */ - case 0x15: - /* - * take out bit 8 so we don't have to have so many - * perror entries - */ - error = (CONL_ERROR_MASK | 0x100 | (cause & ~0x80)); - goto done; - - case 0xc1: /* gateway-detected proc error */ - case 0xc3: /* gateway congestion */ - - error = (CONL_ERROR_MASK | 0x100 | cause); - goto done; - } - } - /* otherwise, a *hopefully* valid perror exists in the e_reason field */ - error = xp->packet_data; - if (error == 0) { - printf("Incoming PKT TYPE 0x%x with reason 0x%x\n", - pk_decode(xp), cause); - error = E_CO_HLI_DISCA; - } -done: - return error; -} - - - -#endif /* _KERNEL */ - -/* - * NAME: make_partial_x25_packet() - * - * FUNCTION and ARGUMENTS: - * Makes part of an X.25 call packet, for use by x25. - * (src) and (dst) are the NSAP-addresses of source and destination. - * (buf) is a ptr to a buffer into which to write this partial header. - * - * 0 Facility length (in octets) - * 1 Facility field, which is a set of: - * m facil code - * m+1 facil param len (for >2-byte facilities) in octets - * m+2..p facil param field - * q user data (protocol identification octet) - * - * - * RETURNS: - * 0 if OK - * E* if failed. - * - * SIDE EFFECTS: - * Stores facilites mbuf in X.25 control block, where the connect - * routine knows where to look for it. - */ - -#ifdef X25_1984 -int cons_use_facils = 1; -#else /* X25_1984 */ -int cons_use_facils = 0; -#endif /* X25_1984 */ - -int cons_use_udata = 1; /* KLUDGE FOR DEBUGGING */ - -Static int -make_partial_x25_packet(struct isopcb *isop, struct pklcd *lcp) -{ - u_int proto = 0; - int flag = 0; - caddr_t buf; - caddr_t ptr; - int len = 0; - int buflen = 0; - caddr_t facil_len; - struct mbuf *m = NULL; - - -#ifdef ARGO_DEBUG - if (argo_debug[D_CCONN]) { - printf("make_partial_x25_packet(%p, %p, %#x, %p, %#x)\n", - isop->isop_laddr, isop->isop_faddr, proto, m, flag); - } -#endif - if (cons_use_udata) { - if (isop->isop_x25crud_len > 0) { - /* - * The user specified something. Stick it in - */ - bcopy(isop->isop_x25crud, lcp->lcd_faddr.x25_udata, - isop->isop_x25crud_len); - lcp->lcd_faddr.x25_udlen = isop->isop_x25crud_len; - } - } - if (cons_use_facils == 0) { - lcp->lcd_facilities = 0; - return 0; - } - m = m_gethdr(M_WAIT, MT_DATA); - buf = mtod(m, caddr_t); - ptr = buf; - - /* ptr now points to facil length (len of whole facil field in OCTETS */ - facil_len = ptr++; - m->m_len = 0; - pk_build_facilities(m, &lcp->lcd_faddr, 0); - -#ifdef ARGO_DEBUG - if (argo_debug[D_CADDR]) { - printf("make_partial calling: ptr %p, len %#x\n", ptr, - isop->isop_laddr->siso_addr.isoa_len); - } -#endif - if (cons_use_facils) { - *ptr++ = 0; /* Marker to separate X.25 facitilies from - * CCITT ones */ - *ptr++ = 0x0f; - *ptr = 0xcb; /* calling facility code */ - ptr++; - ptr++; /* leave room for facil param len (in OCTETS - * + 1) */ - ptr++; /* leave room for the facil param len (in - * nibbles), high two bits of which indicate - * full/partial NSAP */ - len = isop->isop_laddr->siso_addr.isoa_len; - bcopy(isop->isop_laddr->siso_data, ptr, len); - *(ptr - 2) = len + 1; /* facil param len in octets */ - *(ptr - 1) = len << 1; /* facil param len in nibbles */ - ptr += len; - -#ifdef ARGO_DEBUG - if (argo_debug[D_CADDR]) { - printf("make_partial called: ptr %p, len %#x\n", ptr, - isop->isop_faddr->siso_addr.isoa_len); - } -#endif - *ptr = 0xc9; /* called facility code */ - ptr++; - ptr++; /* leave room for facil param len (in OCTETS - * + 1) */ - ptr++; /* leave room for the facil param len (in - * nibbles), high two bits of which indicate - * full/partial NSAP */ - len = isop->isop_faddr->siso_nlen; - bcopy(isop->isop_faddr->siso_data, ptr, len); - *(ptr - 2) = len + 1; /* facil param len = addr len + 1 for - * each of these two length fields, - * in octets */ - *(ptr - 1) = len << 1; /* facil param len in nibbles */ - ptr += len; - - } - *facil_len = ptr - facil_len - 1; - if (*facil_len > MAX_FACILITIES) - return E_CO_PNA_LONG; - - buflen = (int) (ptr - buf); - -#ifdef ARGO_DEBUG - if (argo_debug[D_CDUMP_REQ]) { - int i; - - printf("ECN_CONNECT DATA buf %p len %d (%#x)\n", - buf, buflen, buflen); - for (i = 0; i < buflen;) { - printf("+%d: %02x %02x %02x %02x %02x %02x %02x %02x\n", - i, - *(buf + i), *(buf + i + 1), *(buf + i + 2), *(buf + i + 3), - *(buf + i + 4), *(buf + i + 5), *(buf + i + 6), *(buf + i + 7)); - i += 8; - } - } -#endif -#ifdef ARGO_DEBUG - if (argo_debug[D_CADDR]) { - printf("make_partial returns buf %p size %#x bytes\n", - mtod(m, caddr_t), buflen); - } -#endif - - if (buflen > MHLEN) - return E_CO_PNA_LONG; - - m->m_pkthdr.len = m->m_len = buflen; - lcp->lcd_facilities = m; - return 0; -} - -/* - * NAME: NSAPtoDTE() - * CALLED FROM: - * make_partial_x25_packet() - * FUNCTION and ARGUMENTS: - * get a DTE address from an NSAP-address (struct sockaddr_iso) - * (dst_octet) is the octet into which to begin stashing the DTE addr - * (dst_nibble) takes 0 or 1. 1 means begin filling in the DTE addr - * in the high-order nibble of dst_octet. 0 means low-order nibble. - * (addr) is the NSAP-address - * (flag) is true if the transport suffix is to become the - * last two digits of the DTE address - * A DTE address is a series of ASCII digits - * - * A DTE address may have leading zeros. The are significant. - * 1 digit per nibble, may be an odd number of nibbles. - * - * An NSAP-address has the DTE address in the IDI. Leading zeros are - * significant. Trailing hex f indicates the end of the DTE address. - * The IDI is a series of BCD digits, one per nibble. - * - * RETURNS - * # significant digits in the DTE address, -1 if error. - */ - -Static int -NSAPtoDTE(struct sockaddr_iso *siso, struct sockaddr_x25 *sx25) -{ - int dtelen = -1; - -#ifdef ARGO_DEBUG - if (argo_debug[D_CADDR]) { - printf("NSAPtoDTE: nsap: %s\n", - clnp_iso_addrp(&siso->siso_addr)); - } -#endif - - if (siso->siso_data[0] == AFI_37) { - char *out = sx25->x25_addr; - char *in = siso->siso_data + 1; - int nibble; - char *lim = siso->siso_data + siso->siso_nlen; - char *olim = out + 15; - int lowNibble = 0; - - while (in < lim) { - nibble = ((lowNibble ? *in++ : (*in >> 4)) & 0xf) | 0x30; - lowNibble ^= 1; - if (nibble != 0x3f && out < olim) - *out++ = nibble; - } - dtelen = out - sx25->x25_addr; - *out++ = 0; - } else { - /* - * error = iso_8208snparesolve(addr, x121string, - * &x121strlen); - */ - struct rtentry *rt; - extern struct sockaddr_iso blank_siso; - struct sockaddr_iso nsiso; - - nsiso = blank_siso; - bcopy(nsiso.siso_data, siso->siso_data, - nsiso.siso_nlen = siso->siso_nlen); - if ((rt = rtalloc1((struct sockaddr *) &nsiso, 1)) != NULL) { - struct sockaddr_x25 *sxx = - (struct sockaddr_x25 *) rt->rt_gateway; - char *in = sxx->x25_addr; - - rt->rt_use--; - if (sxx && sxx->x25_family == AF_CCITT) { - bcopy(sx25->x25_addr, sxx->x25_addr, sizeof(sx25->x25_addr)); - while (*in++) { - } - dtelen = in - sxx->x25_addr; - } - } - } - return dtelen; -} - -/* - * NAME: FACILtoNSAP() - * CALLED FROM: - * parse_facil() - * FUNCTION and ARGUMENTS: - * Creates and NSAP in the sockaddr_iso (addr) from the - * x.25 facility found at buf - 1. - * RETURNS: - * 0 if ok, -1 if error. - */ - -Static int -FACILtoNSAP(struct sockaddr_iso *addr, const u_char *buf) -{ - int len_in_nibbles = *++buf & 0x3f; - u_char buf_len = (len_in_nibbles + 1) >> 1;; /* in bytes */ - -#ifdef ARGO_DEBUG - if (argo_debug[D_CADDR]) { - printf("FACILtoNSAP( %p, %#x, %p )\n", buf, buf_len, addr); - } -#endif - - len_in_nibbles = *buf & 0x3f; - /* - * despite the fact that X.25 makes us put a length in nibbles here, - * the NSAP-addrs are always in full octets - */ - switch (*buf++ & 0xc0) { - case 0: - /* Entire OSI NSAP address */ - bcopy((caddr_t) buf, addr->siso_data, addr->siso_nlen = buf_len); - break; - - case 40: - /* Partial OSI NSAP address, assume trailing */ - if (buf_len + addr->siso_nlen > sizeof(addr->siso_addr)) - return -1; - bcopy((caddr_t) buf, TSEL(addr), buf_len); - addr->siso_nlen += buf_len; - break; - - default: - /* - * Rather than blow away the connection, just ignore and use - * NSAP from DTE - */ ; - } - return 0; -} - -Static void -init_siso(struct sockaddr_iso *siso) -{ - siso->siso_len = sizeof(*siso); - siso->siso_family = AF_ISO; - siso->siso_data[0] = AFI_37; - siso->siso_nlen = 8; -} - -/* - * NAME: DTEtoNSAP() - * CALLED FROM: - * parse_facil() - * FUNCTION and ARGUMENTS: - * Creates a type 37 NSAP in the sockaddr_iso (addr) - * from a DTE address found in a sockaddr_x25. - * - * RETURNS: - * 0 if ok; E* otherwise. - */ - -Static int -DTEtoNSAP(struct sockaddr_iso *addr, struct sockaddr_x25 *sx) -{ - char *in, *out; - int first; - int pad_tail = 0; - int src_len; - - - init_siso(addr); - in = sx->x25_addr; - src_len = strlen(in); - addr->siso_nlen = (src_len + 3) / 2; - out = addr->siso_data; - *out++ = 0x37; - if (src_len & 1) { - pad_tail = 0xf; - src_len++; - } - for (first = 0; src_len > 0; src_len--) { - first |= 0xf & *in++; - if (src_len & 1) { - *out++ = first; - first = 0; - } else - first <<= 4; - } - if (pad_tail) - out[-1] |= 0xf; - return 0; /* ok */ -} - -/* - * FUNCTION and ARGUMENTS: - * parses (buf_len) bytes beginning at (buf) and finds - * a called nsap, a calling nsap, and protocol identifier. - * RETURNS: - * 0 if ok, E* otherwise. - */ - -Static int -parse_facil(struct pklcd *lcp, struct isopcb *isop, caddr_t buf, u_char buf_len) -{ - int i; - u_char *ptr = (u_char *) buf; - u_char *facil_lim; - int facil_param_len = 0, facil_len; - -#ifdef ARGO_DEBUG - if (argo_debug[D_CADDR]) { - printf("parse_facil(%p, %p, %p, %#x)\n", - lcp, isop, buf, buf_len); - dump_buf(buf, buf_len); - } -#endif - - /* - * find the beginnings of the facility fields in buf by skipping over - * the called & calling DTE addresses i <- # nibbles in called + # - * nibbles in calling i += 1 so that an odd nibble gets rounded up to - * even before dividing by 2, then divide by two to get # octets - */ - i = (int) (*ptr >> 4) + (int) (*ptr & 0xf); - i++; - ptr += i >> 1; - ptr++; /* plus one for the DTE lengths byte */ - - /* ptr now is at facil_length field */ - facil_len = *ptr++; - facil_lim = ptr + facil_len; -#ifdef ARGO_DEBUG - if (argo_debug[D_CADDR]) { - printf("parse_facils: facil length is 0x%x\n", (int) facil_len); - } -#endif - - while (ptr < facil_lim) { - /* get NSAP addresses from facilities */ - switch (*ptr++) { - case 0xcb: - /* calling NSAP */ - facil_param_len = FACILtoNSAP(isop->isop_faddr, ptr); - break; - case 0xc9: - /* called NSAP */ - facil_param_len = FACILtoNSAP(isop->isop_laddr, ptr); - break; - - /* from here to default are legit cases that I ignore */ - /* variable length */ - case 0xca: /* end-to-end transit delay negot */ - case 0xc6: /* network user id */ - case 0xc5: /* charging info : indicating monetary unit */ - case 0xc2: /* charging info : indicating segment count */ - case 0xc1: /* charging info : indicating call duration */ - case 0xc4: /* RPOA extended format */ - case 0xc3: /* call redirection notification */ - facil_param_len = 0; - break; - - /* 1 octet */ - case 0x0a: /* min. throughput class negot */ - case 0x02: /* throughput class */ - case 0x03: - case 0x47: /* CUG shit */ - case 0x0b: /* expedited data negot */ - case 0x01: /* Fast select or reverse charging (example - * of intelligent protocol design) */ - case 0x04: /* charging info : requesting service */ - case 0x08: /* called line addr modified notification */ - case 0x00: /* marker to indicate beginning of CCITT - * facils */ - facil_param_len = 1; - break; - - /* any 2 octets */ - case 0x42: /* pkt size */ - case 0x43: /* win size */ - case 0x44: /* RPOA basic format */ - case 0x41: /* bilateral CUG shit */ - case 0x49: /* transit delay selection and indication */ - facil_param_len = 2; - break; - - default: - printf("BOGUS FACILITY CODE facil_lim %p" - " facil_len %d, ptr %p *ptr %#x\n", - facil_lim, facil_len, ptr - 1, ptr[-1]); - /* - * facil that we don't handle return E_CO_HLI_REJI; - */ - switch (ptr[-1] & 0xc0) { - case 0x00: - facil_param_len = 1; - break; - case 0x40: - facil_param_len = 2; - break; - case 0x80: - facil_param_len = 3; - break; - case 0xc0: - facil_param_len = 0; - break; - } - } - if (facil_param_len == -1) - return E_CO_REG_ICDA; - if (facil_param_len == 0) /* variable length */ - facil_param_len = (int) *ptr++; /* 1 + the real facil - * param */ - ptr += facil_param_len; - } - return 0; -} - -#endif /* TPCONS */