Switch to NDWO ustar bootfloppy creation process.

distrib/newsmips/floppies/bootfloppy/Makefile

@@ -1,93 +1,21 @@
-#	$NetBSD: Makefile,v 1.7 2002/04/14 02:43:27 tsutsui Exp $
+#	$NetBSD: Makefile,v 1.8 2002/04/19 10:40:23 tsutsui Exp $
 
 .include <bsd.own.mk>
 .include "${_SRC_TOP_}/distrib/Makefile.inc"
 
-.include <bsd.kernobj.mk>
+FLOPPYBASE=	boot
+FLOPPYSIZE=	2880
+FLOPPYFILES=	boot netbsd
+FLOPPYMAX=	2
+FLOPPYINSTDIR=	installation/floppy
 
-BASENAME=	boot
-IMAGE1=		${BASENAME}1.fs
-DISKSIZE=	2880
-FSTMP=		ustar.tmp
 MDEC=		${DESTDIR}/usr/mdec
-BOOT=		boot
+KERNOBJ!=	cd ${.CURDIR}/../instkernel && ${PRINTOBJDIR}
+FLOPPY_NETBSD=	${KERNOBJ}/netbsd.INSTALL.gz
+FLOPPY_BOOT=	${MDEC}/boot
+#	XXXDISTRIB: need MI installboot for newsmips
+FLOPPYINSTBOOT=	"${MDEC}/installboot -v -b 17 boot ${MDEC}/bootxx @IMAGE@"
 
-KERNDIR!=	cd ${.CURDIR}/../instkernel && ${PRINTOBJDIR}
-KERN=		${KERNDIR}/netbsd.INSTALL.gz
+.include "${DISTRIBDIR}/common/Makefile.tarfloppy"
 
-CLEANFILES+=	netbsd ${BOOT} ${FSTMP}
-
-
-realall: netbsd ${BOOT}
-	${PAX} -wvf ${FSTMP} ${BOOT} netbsd
-	@echo
-	@echo Making disk number one
-	dd bs=8k seek=1 count=$$((${DISKSIZE} / 16 - 1)) \
-	    if=${FSTMP} of=${IMAGE1}.tmp
-	@echo "installing new bootblocks"
-	${MDEC}/installboot -v -b 17 ${BOOT} ${MDEC}/bootxx ${IMAGE1}.tmp
-		# XXXDISTRIB
-	@ls -l ${FSTMP} | (read mode links uid gid size junk; \
-		dksize=$$((${DISKSIZE} * 512 - 8 * 1024)); \
-		disks=$$(($$size / $$dksize + 1)); \
-		if test $$size -gt $$dksize; then \
-			d=2; \
-			while test $$d -le $$disks; do \
-				echo; \
-				echo Making disk number $$d.; \
-				IMAGE=${BASENAME}$${d}.fs; \
-				echo USTARFS $$d > $${IMAGE}; \
-				skip=$$((($$d - 1) * (${DISKSIZE} / 16 - 1))); \
-				if test $$d -eq $$disks; then \
-					dd bs=8k seek=1 skip=$${skip} \
-						conv=sync \
-						if=${FSTMP} of=$${IMAGE}; \
-				else \
-					dd bs=8k seek=1 skip=$${skip} \
-					    conv=sync \
-					    count=$$((${DISKSIZE} / 16 - 1)) \
-						if=${FSTMP} of=$${IMAGE}; \
-				fi; \
-				d=$$(($$d + 1)); \
-			done; \
-		else \
-			dd seek=$$(($${size} / 512 + 15)) count=1 \
-				if=/dev/zero of=${IMAGE1}.tmp; \
-		fi; \
-		echo; \
-		bytes=$$(($$dksize * $$disks - $$size)); \
-		echo "There are $$bytes ($$(($$bytes / 1024))K) bytes free\
-			on disk $$disks."; \
-	)
-	mv -f ${IMAGE1}.tmp ${IMAGE1}
-
-# Let the kernel on the diskette be called "netbsd" although
-# it is compressed.  This is because the boot code will search
-# for "netbsd" first, and calling it "netbsd" instead of "netbsd.gz"
-# we avoid scanning all the diskettes before reading the file.
-
-netbsd: ${KERN}
-	rm -f netbsd
-	cp ${KERN} netbsd
-
-# This is "cheating", just so that we have the available
-# space at the start of the tar file.  Installboot will overwrite
-# the start of the bootcode with the tail end of the "real", aligned
-# second-stage boot loader when it is run (which is quite a bit shorter
-# than the entire ${BOOTCODE} file, even when symbols are removed.
-# (the first 15*512 bytes are put into the first 8K filesystem block,
-# around the disklabel)
-
-${BOOT}: ${MDEC}/${BOOT}
-	rm -f ${BOOT}
-	cp ${MDEC}/${BOOT} ${BOOT}
-
-release: check_RELEASEDIR
-	-mkdir -p ${RELEASEDIR}/installation/floppy
-	${RELINSTALL} ${BASENAME}?.fs ${RELEASEDIR}/installation/floppy
-
-clean cleandir distclean:
-	rm -f *.core ${CLEANFILES} ${BASENAME}?.fs ${IMAGE1}.tmp
-
-.include <bsd.obj.mk>
-.include <bsd.subdir.mk>
+.include <bsd.prog.mk>