GENERIC should run on any environment.
It required 6MB of memory; disable some options/devices so that it can run on 4MB machines.
This commit is contained in:
minoura
parent
9f33355278
commit
ae45dff5fc
@ -1,11 +1,10 @@
|
||||
# $NetBSD: Makefile.inc,v 1.7 1999/12/24 17:03:34 minoura Exp $
|
||||
# $NetBSD: Makefile.inc,v 1.8 2000/06/28 15:27:19 minoura Exp $
|
||||
#
|
||||
# etc.x68k/Makefile.inc -- x68k-specific etc Makefile targets
|
||||
#
|
||||
|
||||
# Set this for any kernels beyond GENERIC you want to include
|
||||
# in the distribution.
|
||||
EXTRA_KERNELS+= SMALL
|
||||
BUILD_KERNELS+= INSTALL INSTALL_SMALL
|
||||
|
||||
LOCALTIME= Japan
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
# $NetBSD: GENERIC,v 1.47 2000/06/22 20:27:57 fvdl Exp $
|
||||
# $NetBSD: GENERIC,v 1.48 2000/06/28 15:31:02 minoura Exp $
|
||||
|
||||
#
|
||||
# GENERIC
|
||||
@ -6,9 +6,9 @@
|
||||
|
||||
include "arch/x68k/conf/std.x68k"
|
||||
|
||||
#ident "GENERIC-$Revision: 1.47 $"
|
||||
#ident "GENERIC-$Revision: 1.48 $"
|
||||
|
||||
maxusers 32
|
||||
maxusers 8
|
||||
|
||||
## System kernel configuration. See options(4) for more detail.
|
||||
|
||||
@ -99,7 +99,7 @@ options SYSVSHM # System V shared memory
|
||||
#options DEBUG
|
||||
|
||||
## Make SCSI error messages more verbose when explaining their meanings.
|
||||
options SCSIVERBOSE
|
||||
#options SCSIVERBOSE
|
||||
|
||||
## `INSECURE' turns off the kernel security level (securelevel = 0 always).
|
||||
## This allows writing to /dev/mem, loading kernel modules while multi-user,
|
||||
@ -153,7 +153,7 @@ file-system MSDOSFS # MS-DOS FAT filesystem(s).
|
||||
|
||||
## File system options.
|
||||
options NFSSERVER # Sun NFS-compatible filesystem server
|
||||
options QUOTA # FFS quotas
|
||||
#options QUOTA # FFS quotas
|
||||
#options FFS_EI # FFS Endian Independent support
|
||||
options SOFTDEP # FFS soft updates support.
|
||||
|
||||
@ -163,7 +163,7 @@ options INET6 # IPV6
|
||||
#options IPSEC # IP security
|
||||
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
||||
#options IPSEC_DEBUG # debug for IP security
|
||||
options TCP_COMPAT_42 # 4.2BSD IP implementation compatibility
|
||||
#options TCP_COMPAT_42 # 4.2BSD IP implementation compatibility
|
||||
#options GATEWAY # packet forwarding ("router switch")
|
||||
#options MROUTING # packet forwarding of multicast packets
|
||||
#options DIRECTED_BROADCAST # allow broadcasts through routers
|
||||
@ -172,14 +172,14 @@ options TCP_COMPAT_42 # 4.2BSD IP implementation compatibility
|
||||
#options ISO,TPIP # OSI networking
|
||||
#options EON # OSI tunneling over IP
|
||||
#options CCITT,LLC,HDLC # X.25 packet switched protocol
|
||||
options NETATALK # AppleTalk (over Ethernet) protocol
|
||||
options NTP # Network Time Protocol in-kernel support
|
||||
#options NETATALK # AppleTalk (over Ethernet) protocol
|
||||
#options NTP # Network Time Protocol in-kernel support
|
||||
#options PPS_SYNC # Add serial line synchronization for NTP
|
||||
options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs.
|
||||
options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device
|
||||
options PPP_BSDCOMP # Add BSD compression to ppp device
|
||||
options PPP_DEFLATE # Add deflate (libz) compression to ppp device
|
||||
options PPP_FILTER # Add active filters for ppp (via bpf)
|
||||
#options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device
|
||||
#options PPP_BSDCOMP # Add BSD compression to ppp device
|
||||
#options PPP_DEFLATE # Add deflate (libz) compression to ppp device
|
||||
#options PPP_FILTER # Add active filters for ppp (via bpf)
|
||||
|
||||
|
||||
|
||||
@ -216,9 +216,9 @@ scsibus* at mha0
|
||||
|
||||
sd* at scsibus? target ? lun ? # SCSI disks
|
||||
cd* at scsibus? target ? lun ? # SCSI CD-ROMs
|
||||
st* at scsibus? target ? lun ? # SCSI tapes
|
||||
#st* at scsibus? target ? lun ? # SCSI tapes
|
||||
#ss* at scsibus? target ? lun ? # SCSI scanners
|
||||
ch* at scsibus? target ? lun ? # SCSI changer devices
|
||||
#ch* at scsibus? target ? lun ? # SCSI changer devices
|
||||
#uk* at scsibus? target ? lun ? # SCSI unknown devices
|
||||
|
||||
## Ports
|
||||
@ -260,11 +260,11 @@ pseudo-device vnd 4
|
||||
## Concatenated and striped disks; with this, you can create a software-based
|
||||
## disk array similar to a "RAID 0" setup. See ccd(4).
|
||||
|
||||
pseudo-device ccd 4
|
||||
#pseudo-device ccd 4
|
||||
|
||||
## RAIDframe disk driver: software RAID driver. See raid(4).
|
||||
|
||||
pseudo-device raid 4
|
||||
#pseudo-device raid 4
|
||||
#options RAID_AUTOCONFIG # auto-configuration of RAID components
|
||||
|
||||
## Memory disk device, used on boot floppies with compressed
|
||||
@ -283,21 +283,21 @@ pseudo-device ppp 1
|
||||
|
||||
## Network "tunnel" device, allowing protocol stacks to run in the userland.
|
||||
## This is used by the third-party user-mode "ppp" program, and others.
|
||||
pseudo-device tun 4
|
||||
#pseudo-device tun 4
|
||||
|
||||
## Generic L3 over IP tunnel
|
||||
#pseudo-device gre 2 # generic L3 over IP tunnel
|
||||
|
||||
## Berkeley Packet Filter, required to run RARPD. A generic C-language
|
||||
## interface that allows selective examining of incoming packets.
|
||||
pseudo-device bpfilter 8
|
||||
pseudo-device bpfilter 4
|
||||
|
||||
## IP Filter, used in firewall and NAT applications. See ipnat(8) for
|
||||
## one example of the use of the IP Filter.
|
||||
pseudo-device ipfilter
|
||||
#pseudo-device ipfilter
|
||||
|
||||
## for IPv6
|
||||
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
||||
pseudo-device gif 1 # IPv[46] over IPv[46] tunnel (RFC1933)
|
||||
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
||||
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
||||
|
||||
@ -309,9 +309,9 @@ pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
||||
## number still requires you to run /dev/MAKEDEV to create the files
|
||||
## for the ptys.
|
||||
|
||||
pseudo-device pty 32 # pseudo-ttys (for network, etc.)
|
||||
pseudo-device pty 16 # pseudo-ttys (for network, etc.)
|
||||
|
||||
## Random device, used to implement /dev/random (a source of random noise),
|
||||
## and generate randomness for some kernel formulae.
|
||||
|
||||
pseudo-device rnd
|
||||
#pseudo-device rnd
|
||||
|
||||
@ -1,316 +0,0 @@
|
||||
# $NetBSD: SMALL,v 1.24 2000/06/14 22:02:44 veego Exp $
|
||||
|
||||
#
|
||||
# SMALL -- works with a small memory, e.g. 4MB
|
||||
#
|
||||
|
||||
include "arch/x68k/conf/std.x68k"
|
||||
|
||||
#ident "SMALL-$Revision: 1.24 $"
|
||||
|
||||
maxusers 8
|
||||
|
||||
## System kernel configuration. See options(4) for more detail.
|
||||
|
||||
|
||||
## Options for variants of the m68k MPU
|
||||
## you must have at least the correct one; REQUIRED
|
||||
options M68030
|
||||
options M68040
|
||||
options M68060
|
||||
|
||||
|
||||
#### System options specific to the x68k port
|
||||
|
||||
#options EXTENDED_MEMORY # support for >16MB memory
|
||||
options FPU_EMULATE # software fpu emulation for MC68030
|
||||
options FPSP # floating point emulation for MC68040
|
||||
options M060SP # int/fp emulation for MC68060
|
||||
options JUPITER # support for "Jupiter-X" accelerator
|
||||
#options MAPPEDCOPY # use page mapping for large copyin/copyout
|
||||
#options BUFCACHE=5 # use this % of the memory for buffer cache
|
||||
#options ZSCONSOLE,ZSCN_SPEED="9600" # use serial console
|
||||
|
||||
|
||||
#### System options that are the same for all ports
|
||||
|
||||
## Root device configuration: change the ?'s if you are going to use a
|
||||
## nonstandard root partition (other than where the kernel is booted from)
|
||||
## and/or nonstandard root type (not ffs or nfs). Normally this can be
|
||||
## automagically determined at boot time.
|
||||
|
||||
config netbsd root on ? type ?
|
||||
#config netbsd root on sd0 type ffs
|
||||
|
||||
## RTC is offset from GMT; -540 means JST-9
|
||||
options RTC_OFFSET=-540 # hardware clock is this many mins. west of GMT
|
||||
|
||||
## System call tracing (see ktrace(1)).
|
||||
options KTRACE
|
||||
|
||||
## Collect statistics on kernel malloc's and free's. This does have a
|
||||
## significant performance hit on slower machines, so it is intended for
|
||||
## diagnostic use only.
|
||||
#options KMEMSTATS
|
||||
|
||||
## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2))
|
||||
options SYSVMSG # System V message queues
|
||||
options SYSVSEM # System V semaphores
|
||||
options SYSVSHM # System V shared memory
|
||||
#options SHMMAXPGS=1024 # 1024 pages is the default
|
||||
|
||||
## Loadable kernel module support
|
||||
#options LKM
|
||||
|
||||
## NFS boot options; not supported currently: needs nfsboot program
|
||||
#options NFS_BOOT_BOOTPARAM
|
||||
#options NFS_BOOT_BOOTP
|
||||
#options NFS_BOOT_DHCP
|
||||
|
||||
#### Debugging options
|
||||
|
||||
## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
|
||||
## serial console break or keyboard reset, where the PROM would normally
|
||||
## intercept. DDB_HISTORY_SIZE adds up/down arrow command history.
|
||||
#options DDB # kernel dynamic debugger
|
||||
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
|
||||
#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
|
||||
#options PANICBUTTON # interrupt switch invokes DDB
|
||||
|
||||
## You may also use gdb, on another computer connected to this machine over
|
||||
## a serial port. Both KGDBDEV and KGDBRATE should be specified; KGDBDEV is
|
||||
## a dev_t encoded device number of the serial port to use.
|
||||
## KGDB is not supported for now.
|
||||
#options KGDB # support for kernel gdb
|
||||
#options KGDBDEV=0xc00 # kgdb device number
|
||||
#options KGDBRATE=9600 # baud rate
|
||||
|
||||
## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
|
||||
## such that gdb(1) can be used on a kernel coredump.
|
||||
|
||||
#makeoptions DEBUG="-g"
|
||||
|
||||
## Adds code to the kernel that does internal consistency checks, and will
|
||||
## cause the kernel to panic if corruption of internal data structures
|
||||
## is detected.
|
||||
#options DIAGNOSTIC # extra kernel sanity checking
|
||||
|
||||
## Enable (possibly expensive) debugging code that may also display messages
|
||||
## on the system console
|
||||
#options DEBUG
|
||||
|
||||
## Make SCSI error messages more verbose when explaining their meanings.
|
||||
#options SCSIVERBOSE
|
||||
|
||||
## `INSECURE' turns off the kernel security level (securelevel = 0 always).
|
||||
## This allows writing to /dev/mem, loading kernel modules while multi-user,
|
||||
## and other insecurities good only for development work. Do not use this
|
||||
## option on a production machine.
|
||||
#options INSECURE
|
||||
|
||||
## Allow non-root users to grab /dev/console with programs such as xconsole.
|
||||
## `xconsole' therefore does not need setuid root with this option enabled.
|
||||
#options UCONSOLE
|
||||
|
||||
## `FDSCRIPTS' allows non-readable but executable scripts by providing a
|
||||
## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS',
|
||||
## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
|
||||
## opaque file mechanism. Perl calls this "secure setuid scripts."
|
||||
|
||||
#options FDSCRIPTS
|
||||
#options SETUIDSCRIPTS
|
||||
|
||||
## Options for compatibility with previous releases foreign system binaries.
|
||||
|
||||
#options COMPAT_43 # 4.3BSD system interfaces
|
||||
#options COMPAT_09 # NetBSD 0.9 binary compatibility
|
||||
#options COMPAT_10 # NetBSD 1.0 binary compatibility
|
||||
#options COMPAT_11 # NetBSD 1.1 binary compatibility
|
||||
#options COMPAT_12 # NetBSD 1.2 binary compatibility
|
||||
options COMPAT_13 # NetBSD 1.3 binary compatibility
|
||||
options COMPAT_14 # NetBSD 1.4 binary compatibility
|
||||
#options COMPAT_M68K4K # NetBSD/m68k4k binaries
|
||||
#options COMPAT_SUNOS # SunOS 4.x binary compatibility; broken
|
||||
#options COMPAT_SVR4 # SVR4 binary compatibility; broken
|
||||
#options COMPAT_LINUX # Linux/m68k binary compatibility
|
||||
#options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4)
|
||||
|
||||
## File systems.
|
||||
file-system FFS # Berkeley Fast Filesystem
|
||||
file-system NFS # Sun NFS-compatible filesystem client
|
||||
file-system KERNFS # kernel data-structure filesystem
|
||||
#file-system NULLFS # NULL layered filesystem (buggy)
|
||||
#file-system OVERLAY # overlay file system
|
||||
file-system MFS # memory-based filesystem
|
||||
#file-system FDESC # user file descriptor filesystem
|
||||
#file-system UMAPFS # uid/gid remapping filesystem
|
||||
#file-system LFS # Log-structured filesystem (experimental)
|
||||
#file-system PORTAL # portal filesystem (experimental)
|
||||
file-system PROCFS # /proc
|
||||
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
||||
#file-system UNION # union file system (a little buggy)
|
||||
file-system MSDOSFS # MS-DOS FAT filesystem(s).
|
||||
#file-system ADOSFS # AmigaDOS filesystem
|
||||
|
||||
## File system options.
|
||||
#options NFSSERVER # Sun NFS-compatible filesystem server
|
||||
#options QUOTA # FFS quotas
|
||||
#options FFS_EI # FFS Endian Independent support
|
||||
#options SOFTDEP # FFS soft updates support.
|
||||
|
||||
## Network protocol support. In most environments, INET is required.
|
||||
options INET # IP (Internet Protocol) v4
|
||||
#options INET6 # IPV6
|
||||
#options IPSEC # IP security
|
||||
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
||||
#options IPSEC_DEBUG # debug for IP security
|
||||
options TCP_COMPAT_42 # 4.2BSD IP implementation compatibility
|
||||
#options GATEWAY # packet forwarding ("router switch")
|
||||
#options MROUTING # packet forwarding of multicast packets
|
||||
#options DIRECTED_BROADCAST # allow broadcasts through routers
|
||||
#options NS # Xerox NS networking
|
||||
#options NSIP # Xerox NS tunneling over IP
|
||||
#options ISO,TPIP # OSI networking
|
||||
#options EON # OSI tunneling over IP
|
||||
#options CCITT,LLC,HDLC # X.25 packet switched protocol
|
||||
#options NETATALK # AppleTalk (over Ethernet) protocol
|
||||
#options NTP # Network Time Protocol in-kernel support
|
||||
#options PPS_SYNC # Add serial line synchronization for NTP
|
||||
#options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs.
|
||||
#options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device
|
||||
#options PPP_BSDCOMP # Add BSD compression to ppp device
|
||||
#options PPP_DEFLATE # Add deflate (libz) compression to ppp device
|
||||
#options PPP_FILTER # Add active filters for ppp (via bpf)
|
||||
|
||||
|
||||
|
||||
#### Device configurations
|
||||
|
||||
## Fundamental devices; see also std.x68k
|
||||
dmac0 at intio0 addr 0xe84000 # DMA controler
|
||||
xel0 at intio0
|
||||
opm0 at intio0 addr 0xe90000 # OPM: required for fdc
|
||||
|
||||
## Display devices and console
|
||||
grfbus0 at mainbus0 # bitmapped displays
|
||||
grf0 at grfbus0 # multiplane graphics
|
||||
grf1 at grfbus0 # flexible graphics
|
||||
|
||||
kbd0 at mfp0 # standard keyboard
|
||||
ite0 at grf0 # internal terminal emulator
|
||||
options ITE_KERNEL_ATTR=4 # bold for kernel messages
|
||||
# see /sys/arch/x68k/dev/itevar.h
|
||||
pseudo-device pow 2 # software power switch
|
||||
|
||||
## floppy disks
|
||||
fdc0 at intio0 addr 0xe94000 intr 96 dma 0 dmaintr 100 # floppy controler
|
||||
fd* at fdc0 unit ? # builtin floppy drives
|
||||
|
||||
## SCSI devices
|
||||
scsirom0 at intio0 # SCSI BIOS
|
||||
scsirom1 at intio0 # SCSI BIOS
|
||||
spc* at scsirom? # genuin SCSI
|
||||
scsibus* at spc?
|
||||
mha0 at scsirom? # Mankai MK-HA1 (Mach-2)
|
||||
scsibus* at mha0
|
||||
|
||||
sd* at scsibus? target ? lun ? # SCSI disks
|
||||
cd* at scsibus? target ? lun ? # SCSI CD-ROMs
|
||||
st* at scsibus? target ? lun ? # SCSI tapes
|
||||
#ss* at scsibus? target ? lun ? # SCSI scanners
|
||||
#ch* at scsibus? target ? lun ? # SCSI changer devices
|
||||
#uk* at scsibus? target ? lun ? # SCSI unknown devices
|
||||
|
||||
## Ports
|
||||
zsc0 at intio0 addr 0xe98000 intr 112
|
||||
zstty0 at zsc0 channel 0 # built-in RS-232C
|
||||
#ms0 at zsc0 channel 1 # standard mouse
|
||||
#zsc1 at intio0 addr 0xeafc00 intr 113
|
||||
#zstty2 at zsc1 channel 0
|
||||
#zstty3 at zsc1 channel 1
|
||||
#zsc2 at intio0 addr 0xeafc10 intr 114
|
||||
#zstty4 at zsc2 channel 0
|
||||
#zstty5 at zsc2 channel 1
|
||||
par0 at intio0 addr 0xe8c000 # Builtin printer port
|
||||
|
||||
pseudo-device sram # battery-backuped static RAM
|
||||
pseudo-device bell # OPM bell
|
||||
|
||||
xcom0 at mainbus0 # NS16550 fast serial
|
||||
xcom1 at mainbus0
|
||||
|
||||
## Audio device; broken
|
||||
#okiadpcm0 at intio0 addr 0xe92000 intr 106 errintr 107 dma 3
|
||||
#audio* at okiadpcm*
|
||||
|
||||
## Network interfaces
|
||||
neptune0 at intio0 addr 0xece000 intr 249 # Neptune-X
|
||||
neptune1 at intio0 addr 0xece400 intr 249 # Neptune-X at alt. addr.
|
||||
ne0 at neptune? addr 0x300 # NE2000 or clone
|
||||
#se0 at scsibus? target ? lun ? # Ether+; broken
|
||||
|
||||
|
||||
#### Pseudo devices
|
||||
|
||||
## A disk-like interface to files. Can be used to create floppy, CD,
|
||||
## miniroot images, etc.
|
||||
|
||||
#pseudo-device vnd 4
|
||||
|
||||
## Concatenated and striped disks; with this, you can create a software-based
|
||||
## disk array similar to a "RAID 0" setup. See ccd(4).
|
||||
|
||||
#pseudo-device ccd 4
|
||||
|
||||
## RAIDframe disk driver: software RAID driver. See raid(4).
|
||||
|
||||
#pseudo-device raid 4
|
||||
#options RAID_AUTOCONFIG # auto-configuration of RAID components
|
||||
|
||||
## Memory disk device, used on boot floppies with compressed
|
||||
## kernel-plus-root-disk images.
|
||||
|
||||
#pseudo-device md 1
|
||||
|
||||
## Loopback network interface; required
|
||||
pseudo-device loop
|
||||
|
||||
## SLIP and CSLIP interfaces, for IP over a serial line.
|
||||
pseudo-device sl 1
|
||||
|
||||
## PPP, the successor to SLIP. See pppd(8).
|
||||
pseudo-device ppp 1
|
||||
|
||||
## Network "tunnel" device, allowing protocol stacks to run in the userland.
|
||||
## This is used by the third-party user-mode "ppp" program, and others.
|
||||
#pseudo-device tun 4
|
||||
|
||||
## Generic L3 over IP tunnel
|
||||
#pseudo-device gre 2 # generic L3 over IP tunnel
|
||||
|
||||
## Berkeley Packet Filter, required to run RARPD. A generic C-language
|
||||
## interface that allows selective examining of incoming packets.
|
||||
pseudo-device bpfilter 2
|
||||
|
||||
## IP Filter, used in firewall and NAT applications. See ipnat(8) for
|
||||
## one example of the use of the IP Filter.
|
||||
#pseudo-device ipfilter
|
||||
|
||||
## for IPv6
|
||||
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
||||
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
||||
|
||||
#### Other device configuration
|
||||
|
||||
## Pseudo ttys, required for network logins and programs like screen.
|
||||
## 32 is a good number for average systems; you may have as many as you
|
||||
## like, though 256 is more or less the upper limit. Increasing this
|
||||
## number still requires you to run /dev/MAKEDEV to create the files
|
||||
## for the ptys.
|
||||
|
||||
pseudo-device pty 8 # pseudo-ttys (for network, etc.)
|
||||
|
||||
## Random device, used to implement /dev/random (a source of random noise),
|
||||
## and generate randomness for some kernel formulae.
|
||||
|
||||
#pseudo-device rnd
|
||||
Loading…
Reference in New Issue
Block a user