New kernel configuration for use during Cobalt netboot or as a rescue kernel
image. The idea is to keep INSTALL as small as possible (XXXVERBOSE options are off, no IP filtering, SCSI support etc.) to shoehorn into size limits imposed by the Cobalt's firmware and to have full-blown GENERIC kernel which uses NetBSD bootloader anyway.
This commit is contained in:
cdi
parent
32386a4e99
commit
ab1460715b
|
|
@ -0,0 +1,325 @@
|
|||
# $NetBSD: INSTALL,v 1.1 2005/01/23 20:05:26 cdi Exp $
|
||||
#
|
||||
# INSTALL -- installation and rescue kernel.
|
||||
#
|
||||
# This kernel should be derived from GENERIC with most features
|
||||
# commented out to shoehorn into Cobalt kernel size limitations.
|
||||
#
|
||||
|
||||
include "arch/cobalt/conf/std.cobalt"
|
||||
|
||||
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
||||
|
||||
#ident "GENERIC-$Revision: 1.1 $"
|
||||
|
||||
makeoptions COPTS="-Os"
|
||||
|
||||
maxusers 32
|
||||
|
||||
# Standard system options
|
||||
options KTRACE # system call tracing support
|
||||
options SYSTRACE # system call vetting via systrace(1)
|
||||
options SYSVMSG # System V message queues
|
||||
options SYSVSEM # System V semaphores
|
||||
#options SEMMNI=10 # number of semaphore identifiers
|
||||
#options SEMMNS=60 # number of semaphores in system
|
||||
#options SEMUME=10 # max number of undo entries per process
|
||||
#options SEMMNU=30 # number of undo structures in system
|
||||
options SYSVSHM # System V shared memory
|
||||
#options SHMMAXPGS=1024 # 1024 pages is the default
|
||||
options P1003_1B_SEMAPHORE # p1003.1b semaphore support
|
||||
#options LKM # loadable kernel modules
|
||||
#options NTP # network time protocol
|
||||
options USERCONF # userconf(4) support
|
||||
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
||||
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
|
||||
|
||||
# Enable experimental buffer queue strategy for better responsiveness under
|
||||
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
|
||||
#options NEW_BUFQ_STRATEGY
|
||||
|
||||
# Debugging options
|
||||
#options DIAGNOSTIC # extra kernel sanity checking
|
||||
#options DEBUG # extra kernel debugging support
|
||||
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
||||
options DDB # kernel dynamic debugger
|
||||
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
|
||||
#makeoptions DEBUG="-g" # compile full symbol table
|
||||
|
||||
# Compatibility options
|
||||
options COMPAT_43 # compatibility with 4.3BSD binaries
|
||||
#options COMPAT_09 # NetBSD 0.9 binary compatibility
|
||||
#options COMPAT_10 # NetBSD 1.0 binary compatibility
|
||||
#options COMPAT_11 # NetBSD 1.1 binary compatibility
|
||||
#options COMPAT_12 # NetBSD 1.2 binary compatibility
|
||||
#options COMPAT_13 # NetBSD 1.3 binary compatibility
|
||||
#options COMPAT_14 # NetBSD 1.4 binary compatibility
|
||||
options COMPAT_16 # NetBSD 1.6 binary compatibility
|
||||
#options EXEC_ECOFF # exec ECOFF binaries
|
||||
#options COMPAT_ULTRIX # binary compatibility with Ultrix
|
||||
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
||||
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
|
||||
|
||||
# File systems
|
||||
file-system FFS # Berkeley Fast Filesystem
|
||||
file-system EXT2FS # second extended file system (linux)
|
||||
file-system NFS # Sun NFS-compatible filesystem client
|
||||
#file-system KERNFS # kernel data-structure filesystem
|
||||
#file-system NULLFS # NULL layered filesystem
|
||||
#file-system OVERLAY # overlay file system
|
||||
file-system MFS # memory-based filesystem
|
||||
file-system FDESC # user file descriptor filesystem
|
||||
#file-system UMAPFS # uid/gid remapping filesystem
|
||||
#file-system LFS # Log-based filesystem (still experimental)
|
||||
#file-system PORTAL # portal filesystem (still experimental)
|
||||
#file-system PROCFS # /proc
|
||||
#file-system CD9660 # ISO 9660 + Rock Ridge file system
|
||||
#file-system UNION # union file system
|
||||
#file-system MSDOSFS # MS-DOS FAT filesystem(s).
|
||||
#file-system CODA # Coda File System; also needs vcoda (below)
|
||||
|
||||
# File system options
|
||||
#options NFSSERVER # Sun NFS-compatible filesystem server
|
||||
#options QUOTA # FFS quotas
|
||||
#options FFS_EI # FFS Endian Independant support
|
||||
#options SOFTDEP # FFS soft updates support.
|
||||
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
||||
# immutable) behave as system flags.
|
||||
|
||||
# Networking options
|
||||
#options GATEWAY # IP packet forwarding
|
||||
options INET # Internet protocols
|
||||
#options INET6 # IPV6
|
||||
#options IPSEC # IP security
|
||||
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
||||
#options IPSEC_DEBUG # debug for IP security
|
||||
#options MROUTING # packet forwarding of multicast packets
|
||||
#options PIM # Protocol Independent Multicast
|
||||
#options NS # Xerox NS networking
|
||||
#options NSIP # Xerox NS tunneling over IP
|
||||
#options ISO,TPIP # OSI networking
|
||||
#options EON # OSI tunneling over IP
|
||||
#options CCITT,LLC,HDLC # X.25
|
||||
#options NETATALK # AppleTalk (over Ethernet) protocol
|
||||
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
||||
#options PPP_DEFLATE # Deflate compression support for PPP
|
||||
#options PPP_FILTER # Active filter support for PPP (requires bpf)
|
||||
#options PFIL_HOOKS # pfil(9) packet filter hooks
|
||||
#options IPFILTER_LOG # ipmon(8) log support
|
||||
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
||||
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
||||
|
||||
#options ALTQ # Manipulate network interfaces' output queues
|
||||
#options ALTQ_BLUE # Stochastic Fair Blue
|
||||
#options ALTQ_CBQ # Class-Based Queueing
|
||||
#options ALTQ_CDNR # Diffserv Traffic Conditioner
|
||||
#options ALTQ_FIFOQ # First-In First-Out Queue
|
||||
#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
|
||||
#options ALTQ_HFSC # Hierarchical Fair Service Curve
|
||||
#options ALTQ_LOCALQ # Local queueing discipline
|
||||
#options ALTQ_PRIQ # Priority Queueing
|
||||
#options ALTQ_RED # Random Early Detection
|
||||
#options ALTQ_RIO # RED with IN/OUT
|
||||
#options ALTQ_WFQ # Weighted Fair Queueing
|
||||
|
||||
# These options enable verbose messages for several subsystems.
|
||||
# Warning, these may compile large string tables into the kernel!
|
||||
#options PCIVERBOSE # verbose PCI device autoconfig messages
|
||||
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
||||
#options SCSIVERBOSE # human readable SCSI error messages
|
||||
#options MIIVERBOSE # verbose PHY autoconfig messages
|
||||
|
||||
options NFS_BOOT_DHCP
|
||||
|
||||
config netbsd root on ? type nfs
|
||||
|
||||
mainbus0 at root
|
||||
|
||||
cpu0 at mainbus?
|
||||
|
||||
com0 at mainbus? addr 0x1c800000 level 3
|
||||
options COM_16650
|
||||
|
||||
panel0 at mainbus? addr 0x1f000000
|
||||
|
||||
gt0 at mainbus? addr 0x14000000
|
||||
|
||||
pci* at gt0
|
||||
pchb* at pci? dev ? function ?
|
||||
pcib* at pci? dev ? function ?
|
||||
|
||||
# Cryptographic Devices
|
||||
|
||||
# PCI cryptographic devices
|
||||
#hifn* at pci? dev ? function ? # Hifn 7755/7811/795x
|
||||
#ubsec* at pci? dev ? function ? # Broadcom 5501/5601/580x/582x
|
||||
|
||||
# PCI serial/parallel interfaces
|
||||
#puc* at pci? dev ? function ? # PCI "universal" comm. cards
|
||||
#com* at puc? port ?
|
||||
#lpt* at puc? port ?
|
||||
#cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial cards
|
||||
|
||||
# PCI SCSI controllers
|
||||
#adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA]
|
||||
#adw* at pci? dev ? function ? # AdvanSys 9xxUW SCSI
|
||||
#ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
|
||||
#bha* at pci? dev ? function ? # BusLogic 9xx SCSI
|
||||
#dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID
|
||||
#isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FC
|
||||
#siop* at pci? dev ? function ? # NCR 53c8xx SCSI
|
||||
#esiop* at pci? dev ? function ? # NCR 53c82s75xx SCSI and newer
|
||||
#pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
|
||||
|
||||
# SCSI bus support
|
||||
#scsibus* at adv?
|
||||
#scsibus* at adw?
|
||||
#scsibus* at ahc?
|
||||
#scsibus* at bha?
|
||||
#scsibus* at dpt?
|
||||
#scsibus* at isp?
|
||||
#scsibus* at siop?
|
||||
#scsibus* at esiop?
|
||||
#scsibus* at pcscp?
|
||||
|
||||
# SCSI devices
|
||||
#sd* at scsibus? target ? lun ? # SCSI disk drives
|
||||
#st* at scsibus? target ? lun ? # SCSI tape drives
|
||||
#cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
|
||||
#ch* at scsibus? target ? lun ? # SCSI autochangers
|
||||
#ss* at scsibus? target ? lun ? # SCSI scanners
|
||||
#uk* at scsibus? target ? lun ? # SCSI unknown
|
||||
|
||||
# RAID controllers and devices
|
||||
#cac* at pci? dev ? function ? # Compaq array controller
|
||||
#ca* at cac? unit ? # Compaq array disk device
|
||||
|
||||
# IDE and related devices
|
||||
# PCI IDE controllers - see pciide(4) for supported hardware.
|
||||
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
|
||||
# how to set up DMA modes for this chip. This may work, or may cause
|
||||
# a machine hang with some controllers.
|
||||
pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
|
||||
acardide* at pci? dev ? function ? # Acard IDE controllers
|
||||
aceride* at pci? dev ? function ? # Acer Lab IDE controllers
|
||||
artsata* at pci? dev ? function ? # Intel i31244 SATA controller
|
||||
cmdide* at pci? dev ? function ? # CMD tech IDE controllers
|
||||
cypide* at pci? dev ? function ? # Cypress IDE controllers
|
||||
hptide* at pci? dev ? function ? # Triones/HighPoint IDE controllers
|
||||
optiide* at pci? dev ? function ? # Opti IDE controllers
|
||||
#piixide* at pci? dev ? function ? # Intel IDE controllers
|
||||
pdcide* at pci? dev ? function ? # Promise IDE controllers
|
||||
pdcsata* at pci? dev ? function ? # Promise SATA150 controllers
|
||||
satalink* at pci? dev ? function ? # SiI SATALink controllers
|
||||
siside* at pci? dev ? function ? # SiS IDE controllers
|
||||
slide* at pci? dev ? function ? # Symphony Labs IDE controllers
|
||||
viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers
|
||||
|
||||
# ATA bus
|
||||
atabus* at ata?
|
||||
|
||||
# IDE drives
|
||||
# Flags are used only with controllers that support DMA operations
|
||||
# and mode settings (e.g. some pciide controllers)
|
||||
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
||||
# mode to use, the next set of four bits the DMA mode and the third set the
|
||||
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
||||
# to use, and the last bit must be 1 for this setting to be used.
|
||||
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
||||
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
||||
# (0xc=1100, 0xa=1010, 0xf=1111)
|
||||
# 0x0000 means "use whatever the drive claims to support".
|
||||
wd* at atabus? drive ? flags 0x0000
|
||||
|
||||
# PCI network interfaces
|
||||
#en* at pci? dev ? function ? # ENI/Adaptec ATM
|
||||
#ep* at pci? dev ? function ? # 3Com 3c59x
|
||||
#ex* at pci? dev ? function ? # 3Com 90x[BC]
|
||||
#epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
|
||||
#esh* at pci? dev ? function ? # Essential HIPPI card
|
||||
#fpa* at pci? dev ? function ? # DEC DEFPA FDDI
|
||||
#fxp* at pci? dev ? function ? # Intel EtherExpress PRO10+/100B
|
||||
#le* at pci? dev ? function ? # PCnet-PCI Ethernet
|
||||
#ne* at pci? dev ? function ? # NE2000-compatible Ethernet
|
||||
#ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial
|
||||
#sip* at pci? dev ? function ? # SiS 900 Ethernet
|
||||
#tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
|
||||
tlp* at pci? dev ? function ? # DECchip 21x4x and clones
|
||||
#vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
|
||||
#lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
|
||||
#rtk* at pci? dev ? function ? # Realtek 8129/8139
|
||||
|
||||
# MII/PHY support
|
||||
#exphy* at mii? phy ? # 3Com internal PHYs
|
||||
#icsphy* at mii? phy ? # ICS189x PHYs
|
||||
#inphy* at mii? phy ? # Intel 82555 PHYs
|
||||
#iophy* at mii? phy ? # Intel 82553 PHYs
|
||||
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
|
||||
#nsphy* at mii? phy ? # NS83840 PHYs
|
||||
#nsphyter* at mii? phy ? # NS83843 PHYs
|
||||
#qsphy* at mii? phy ? # Quality Semiconductor QS6612
|
||||
#sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
|
||||
#tlphy* at mii? phy ? # ThunderLAN PHYs
|
||||
#tqphy* at mii? phy ? # TDK Semiconductor PHYs
|
||||
#ukphy* at mii? phy ? # generic unknown PHYs
|
||||
|
||||
# PCI audio devices
|
||||
#clcs* at pci? dev ? function ? # Cirrus Logic CS4280
|
||||
#eap* at pci? dev ? function ? # Ensoniq AudioPCI
|
||||
#eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
|
||||
#fms* at pci? dev ? function ? # Forte Media FM801
|
||||
#sbl* at pci? dev ? function ? # SoundBlaster Live!
|
||||
#sv* at pci? dev ? function ? # S3 SonicVibes
|
||||
|
||||
# Pseudo-devices
|
||||
|
||||
#pseudo-device crypto # opencrypto framework
|
||||
|
||||
# Disk/mass storage pseudo-devices
|
||||
#pseudo-device ccd 4 # concatenated disk devices
|
||||
#pseudo-device cgd 4 # cryptographic disk devices
|
||||
#pseudo-device raid 8 # RAIDframe disk driver
|
||||
#options RAID_AUTOCONFIG # auto-configuration of RAID
|
||||
# Options to enable various other RAIDframe RAID types.
|
||||
# options RF_INCLUDE_EVENODD=1
|
||||
# options RF_INCLUDE_RAID5_RS=1
|
||||
# options RF_INCLUDE_PARITYLOGGING=1
|
||||
# options RF_INCLUDE_CHAINDECLUSTER=1
|
||||
# options RF_INCLUDE_INTERDECLUSTER=1
|
||||
# options RF_INCLUDE_PARITY_DECLUSTERING=1
|
||||
# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
||||
#pseudo-device md 1 # memory disk device (ramdisk)
|
||||
#pseudo-device vnd 4 # disk-like interface to files
|
||||
|
||||
# Network pseudo-devices
|
||||
#pseudo-device bpfilter 8 # Berkeley packet filter
|
||||
#pseudo-device ipfilter # IP filter (firewall) and NAT
|
||||
pseudo-device loop # network loopback
|
||||
#pseudo-device ppp 2 # Point-to-Point Protocol
|
||||
#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
||||
#pseudo-device sl 2 # Serial Line IP
|
||||
#pseudo-device strip 2 # Starmode Radio IP (Metricom)
|
||||
#pseudo-device tun 2 # network tunneling over tty
|
||||
#pseudo-device tap # virtual Ethernet
|
||||
#pseudo-device gre 2 # generic L3 over IP tunnel
|
||||
#pseudo-device gif 4 # RFC1933 tunnel
|
||||
#pseudo-device faith 1 # IPv[46] tcp relay translation
|
||||
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
||||
#pseudo-device vlan # IEEE 802.1q encapsulation
|
||||
#pseudo-device bridge # simple inter-network bridging
|
||||
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
|
||||
|
||||
# Miscellaneous pseudo-devices
|
||||
pseudo-device pty # pseudo-terminals
|
||||
#pseudo-device tb 1 # tablet line discipline
|
||||
#pseudo-device sequencer 1 # MIDI sequencer
|
||||
pseudo-device rnd # /dev/random & kernel generator
|
||||
#options RND_COM # use "com" randomness (BROKEN)
|
||||
pseudo-device clockctl # user control of clock subsystem
|
||||
pseudo-device nullcons # no-op console
|
||||
|
||||
# A pseudo device needed for Coda # also needs CODA (above)
|
||||
#pseudo-device vcoda 4 # coda minicache <-> venus comm.
|
||||
#pseudo-device ksyms # /dev/ksyms
|
||||
#pseudo-device pf # PF packet filter
|
||||
#pseudo-device pflog # PF log if
|
||||
Loading…
Reference in New Issue