diff --git a/etc/etc.hp300/MAKEDEV b/etc/etc.hp300/MAKEDEV
new file mode 100644
index 000000000000..aab0fe9467df
--- /dev/null
+++ b/etc/etc.hp300/MAKEDEV
@@ -0,0 +1,278 @@
+#!/bin/sh -
+#
+# Copyright (c) 1990 The Regents of the University of California.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed by the University of
+#	California, Berkeley and its contributors.
+# 4. Neither the name of the University nor the names of its contributors
+#    may be used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+#
+#	@(#)MAKEDEV	5.5 (Berkeley) 5/28/91
+#
+# Device "make" file.  Valid arguments:
+#	std	standard devices
+#	local	configuration specific devices
+# Tapes:
+#	ct*	HP300 HP-IB cartridge tape
+#	st*	Exabyte tape
+# Disks:
+#	cd*	"concatenated" pseudo-disks
+#	rd*	HP300 HP-IB disks
+#	sd*	HP300 SCSI disks
+#	vnd*	"file" pseudo-disks
+# Terminal multiplexors:
+#	dca*	HP200/300 single port serial interface
+#	dcm*	HP200/300 4 port serial mux interface
+# Pseudo terminals:
+#	pty*	set of 16 master and slave pseudo terminals
+# Printers:
+# Call units:
+# Special purpose devices:
+#	flog*	kernel logging device
+#	grf*	raw interface to HP300 graphics devices
+#	ite*	terminal emulator interface to HP300 graphics devices
+#	hil	HP300 HIL input devices
+
+PATH=/sbin:/bin/:/usr/bin:/usr/sbin
+umask 77
+for i
+do
+case $i in
+
+std)
+	mknod console		c 0 0
+	mknod drum		c 3 0	; chmod 640 drum ; chgrp kmem drum
+	mknod kmem		c 2 1	; chmod 640 kmem ; chgrp kmem kmem
+	mknod mem		c 2 0	; chmod 640 mem ; chgrp kmem mem
+	mknod null		c 2 2	; chmod 666 null
+	mknod tty		c 1 0	; chmod 666 tty
+	mknod klog		c 6 0	; chmod 600 klog
+	mknod stdin		c 21 0	; chmod 666 stdin
+	mknod stdout		c 21 1	; chmod 666 stdout
+	mknod stderr		c 21 2	; chmod 666 stderr
+	mkdir fd > /dev/null 2>&1
+	(cd fd && eval `echo "" | awk ' BEGIN { \
+		for (i = 0; i < 64; i++) \
+			printf("mknod %d c 21 %d;", i, i)}'`)
+	chown -R bin.bin fd
+	chmod 555 fd
+	chmod 666 fd/*
+	;;
+
+ct*|st*)
+	umask 0 ; unit=`expr $i : '..\(.*\)'`
+	case $i in
+	ct*) name=ct; blk=0; chr=7;;
+	st*) name=st; blk=6; chr=20;;
+	esac
+	case $unit in
+	0|1|2|3|4|5|6|7)
+		four=`expr $unit + 4` ; eight=`expr $unit + 8`
+		twelve=`expr $unit + 12`; twenty=`expr $unit + 20`
+		#
+		# block devices don't work so don't make them
+		#mknod ${name}${unit}	b $blk $unit
+		#mknod ${name}${four}	b $blk $four
+		#mknod ${name}${eight}	b $blk $eight
+		#mknod ${name}${twelve}	b $blk $twelve
+		#mknod n${name}${unit}	b $blk $four ;: sanity w/pdp11 v7
+		#mknod n${name}${eight}	b $blk $twelve ;: ditto
+		#
+		mknod r${name}${unit}	c $chr $unit
+		mknod r${name}${four}	c $chr $four
+		mknod r${name}${eight}	c $chr $eight
+		mknod r${name}${twelve}	c $chr $twelve
+		ln r${name}${four} nr${name}${unit} ;: sanity w/pdp11 v7
+		ln r${name}${twelve} nr${name}${eight} ;: ditto
+		;;
+	*)
+		echo bad unit for tape in: $1
+		;;
+	esac
+	umask 77
+	;;
+
+cd*|fd*|rd*|sd*)
+	umask 2 ; unit=`expr $i : '..\(.*\)'`
+	case $i in
+	rd*) name=rd; blk=2; chr=9;;
+	sd*) name=sd; blk=4; chr=8;;
+	cd*) name=cd; blk=5; chr=17;;
+	vnd*) name=vnd; blk=6; chr=19;;
+	esac
+	case $unit in
+	0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|\
+	17|18|19|20|21|22|23|24|25|26|27|28|29|30|31)
+		mknod ${name}${unit}c	b $blk `expr $unit '*' 8 + 2`
+		mknod r${name}${unit}c	c $chr `expr $unit '*' 8 + 2`
+		if [ $name != cd -a $name != vnd ]
+		then
+		mknod ${name}${unit}a	b $blk `expr $unit '*' 8 + 0`
+		mknod ${name}${unit}b	b $blk `expr $unit '*' 8 + 1`
+		mknod ${name}${unit}d	b $blk `expr $unit '*' 8 + 3`
+		mknod ${name}${unit}e	b $blk `expr $unit '*' 8 + 4`
+		mknod ${name}${unit}f	b $blk `expr $unit '*' 8 + 5`
+		mknod ${name}${unit}g	b $blk `expr $unit '*' 8 + 6`
+		mknod ${name}${unit}h	b $blk `expr $unit '*' 8 + 7`
+		mknod r${name}${unit}a	c $chr `expr $unit '*' 8 + 0`
+		mknod r${name}${unit}b	c $chr `expr $unit '*' 8 + 1`
+		mknod r${name}${unit}d	c $chr `expr $unit '*' 8 + 3`
+		mknod r${name}${unit}e	c $chr `expr $unit '*' 8 + 4`
+		mknod r${name}${unit}f	c $chr `expr $unit '*' 8 + 5`
+		mknod r${name}${unit}g	c $chr `expr $unit '*' 8 + 6`
+		mknod r${name}${unit}h	c $chr `expr $unit '*' 8 + 7`
+		fi
+		chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
+		chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h]
+		;;
+	*)
+		echo bad unit for disk in: $i
+		;;
+	esac
+	umask 77
+	;;
+
+dca*)
+	unit=`expr $i : 'dca\(.*\)'`
+	case $unit in
+	0)
+		mknod tty0 c 12 0
+		;;
+	*)
+		echo bad unit for dca in: $i
+		;;
+	esac
+	;;
+
+dcm*)
+	unit=`expr $i : 'dcm\(.*\)'`
+	case $unit in
+	0|1|2|3)
+		eval `echo $unit | awk ' { unit = $1; u = 4 * $1 } END {
+		for (i = 0; i < 4; i++)
+		printf("mknod tty0%x c 15 %d; ",u+i,u+i); }'`
+	;;
+	*)
+		echo bad unit for dcm in: $i
+		;;
+	esac
+	;;
+
+ite*)
+	unit=`expr $i : 'ite\(.*\)'`
+	case $unit in
+	0|1|2|3)
+		mknod ttye${unit} c 13 ${unit}
+		;;
+	*)
+		echo bad unit for ite in: $i
+		;;
+	esac
+	;;
+
+grf*)
+	unit=`expr $i : 'grf\(.*\)'`
+	case $unit in
+	0|1|2|3)
+		mknod grf${unit} c 10 ${unit}; chmod 666 grf${unit}
+		echo "grf${unit}: use MAKEDEV.hpux to make HP-UX names for device"
+		;;
+	*)
+		echo bad unit for grf in: $i
+		;;
+	esac
+	;;
+
+hil)
+	for unit in 0 1 2 3 4 5 6 7
+	do
+		mknod hil${unit} c 14 ${unit}
+		if [ -f /usr/local/hilinfo ]
+		then
+			case `/usr/local/hilinfo -t hil${unit}` in
+			mouse)
+				if [ ! -f locator ]
+				then
+					ln hil${unit} locator
+				fi
+				;;
+			keyboard)
+				if [ ! -f keyboard ]
+				then
+					ln hil${unit} keyboard
+				fi
+				;;
+			*)
+				;;
+			esac
+		fi
+	done
+	if [ ! -f /usr/local/hilinfo ]
+	then
+		ln hil1 keyboard
+		ln hil3 locator
+	fi
+	chmod 666 hil*
+	echo "hil: use MAKEDEV.hpux to make HP-UX names for devices"
+	;;
+
+pty*)
+	class=`expr $i : 'pty\(.*\)'`
+	case $class in
+	0) offset=0 name=p;;
+	1) offset=16 name=q;;
+	2) offset=32 name=r;;
+	3) offset=48 name=s;;
+# Note that telnetd, rlogind, and xterm (at least) only look at p-s.
+	4) offset=64 name=t;;
+	*) echo bad unit for pty in: $i;;
+	esac
+	case $class in
+	0|1|2|3|4)
+		umask 0
+		eval `echo $offset $name | awk ' { b=$1; n=$2 } END {
+			for (i = 0; i < 16; i++)
+				printf("mknod tty%s%x c 4 %d; \
+					mknod pty%s%x c 5 %d; ", \
+					n, i, b+i, n, i, b+i); }'`
+		umask 77
+		if [ $class = 1 ]; then
+			mv ttyqf ttyv0; mv ptyqf ptyv0
+		fi
+		;;
+	esac
+	;;
+
+local)
+	umask 0
+	sh MAKEDEV.local
+	;;
+*)
+	echo $i: unknown device
+	;;
+esac
+done
diff --git a/etc/etc.hp300/disktab b/etc/etc.hp300/disktab
new file mode 100644
index 000000000000..6da9d1143529
--- /dev/null
+++ b/etc/etc.hp300/disktab
@@ -0,0 +1,274 @@
+#
+#	@(#)disktab	5.5 (Berkeley) 2/27/91
+#
+# Disk geometry and partition layout tables. 
+# Key:
+#	ty	type of disk
+#	ns	#sectors/track
+#	nt	#tracks/cylinder
+#	nc	#cylinders/disk
+#	rm	rpm, 3600 default
+#	se	sector size, 512 default
+#	sf	supports bad144-style bad sector forwarding
+#	so	partition offsets in sectors
+#	p[a-h]	partition sizes in sectors
+#	b[a-h]	partition block sizes in bytes
+#	f[a-h]	partition fragment sizes in bytes
+#
+# All partition sizes contain space
+# for bad sector tables unless the
+# device drivers fail to support this.
+#
+# Entries may also be used for other compatible drives
+# with the same geometry.
+
+#
+# HP CS80 Drives on rd (new style partitioning).  These mapping support
+# three basic layouts:
+#
+#	A/B/G:   This is the "traditional" setup for a bootable disk.
+#	         A is the root partition, B the swap, and G is for /usr
+#		 and users.
+#	A/D/E/F (large drives):
+#	A/D/H (small drives):
+#		 This is a setup for bootable systems requiring more swap
+#	         (e.g. those who need CL).  It has A as the root, D as a
+#	         larger swap, E and F (or H) as smaller user partitions.
+#		 E could  be used for /usr and F for users (or H for both).
+#	C:       This gives a single, non-bootable, large user filesystem.
+#	         Good for second drives on a machine as either /usr/src
+#		 or a large /usr or user partition.
+
+rd7945|rd7946|rd7945A|rd7946A|HP7945/46A:\
+	:ty=winchester:ns#16:nt#7:nc#968:\
+	:pa#15904:ba#8192:fa#1024:\
+	:pb#20160:\
+	:pc#108416:bc#4096:fc#1024:\
+	:pd#40320:\
+	:pg#72240:bg#4096:fg#512:\
+	:ph#52080:bh#4096:fh#512:
+rd7957|rd7957A|HP7957A:\
+	:ty=winchester:ns#22:nt#7:nc#1036:\
+	:pa#16016:ba#8192:fa#1024:\
+	:pb#24640:\
+	:pc#159544:bc#4096:fc#1024:\
+	:pd#42350:\
+	:pe#54824:be#4096:fe#512:\
+	:pf#46200:bf#4096:ff#1024:\
+	:pg#118734:bg#4096:fg#1024:\
+	:ph#101024:bh#4096:fh#1024:
+rd7958|rd7958A|HP7958A:\
+	:ty=winchester:ns#36:nt#7:nc#1013:\
+	:pa#16128:ba#8192:fa#1024:\
+	:pb#32256:\
+	:pc#255276:bc#4096:fc#1024:\
+	:pd#48384:\
+	:pe#100800:be#4096:fe#512:\
+	:pf#89712:bf#4096:ff#1024:\
+	:pg#206640:bg#4096:fg#1024:\
+	:ph#190512:bh#4096:fh#1024:
+rd7933|rd7933H|HP7933H:\
+	:ty=winchester:ns#46:nt#13:nc#1321:\
+	:pa#16146:ba#8192:fa#1024:\
+	:pb#66976:\
+	:pc#789958:bc#4096:fc#1024:\
+	:pd#16146:bd#8192:fd#1024:\
+	:pe#165646:be#4096:fe#1024:\
+	:pf#165646:bf#4096:ff#1024:\
+	:pg#706238:bg#4096:fg#1024:\
+	:ph#358800:bh#4096:fh#1024:
+rd7937|rd7937H|HP7937H:\
+	:ty=winchester:ns#123:nt#13:nc#698:\
+	:pa#15990:ba#8192:fa#1024:\
+	:pb#67158:\
+	:pc#1116102:bc#4096:fc#1024:\
+	:pd#15990:bd#8192:fd#1024:\
+	:pe#246246:be#4096:fe#1024:\
+	:pf#246246:bf#4096:ff#1024:\
+	:pg#1031355:bg#4096:fg#512:\
+	:ph#522873:bh#4096:fh#1024:
+rd9134|rd9134L|HP9134L:\
+	:ty=winchester:ns#16:nt#5:nc#973:\
+	:pa#15920:ba#8192:fa#1024:\
+	:pb#20000:\
+	:pc#77840:bc#4096:fc#1024\
+	:pd#32000:\
+	:pg#41840:bg#4096:fg#512:\
+	:ph#29840:bh#4096:fh#512:
+rd7957B|HP7957B:\
+	:ty=winchester:ns#18:nt#7:nc#1269:\
+	:pa#16002:ba#8192:fa#1024:\
+	:pb#32760:\
+	:pc#159894:bc#4096:fc#1024:\
+	:pd#49140:\
+	:pe#50400:be#4096:fe#512:\
+	:pf#44226:bf#4096:ff#1024:\
+	:pg#111006:bg#4096:fg#1024:\
+	:ph#94626:bh#4096:fh#1024:
+rd7958B|rd7962|rd7962B|HP7958/62B:\
+	:ty=winchester:ns#42:nt#9:nc#786:\
+	:pa#16254:ba#8192:fa#1024:\
+	:pb#32886:\
+	:pc#297108:bc#4096:fc#1024:\
+	:pd#49140:\
+	:pe#121716:be#4096:fe#512:\
+	:pf#109620:bf#4096:ff#1024:\
+	:pg#247590:bg#4096:fg#1024:\
+	:ph#231336:bh#4096:fh#1024:
+rd7959B|rd7963|rd7963B|HP7959/63B:\
+	:ty=winchester:ns#42:nt#9:nc#1572:\
+	:pa#16254:ba#8192:fa#1024:\
+	:pb#49140:\
+	:pc#594216:bc#4096:fc#1024:\
+	:pd#65772:\
+	:pe#303912:be#4096:fe#512:\
+	:pf#207900:bf#4096:ff#1024:\
+	:pg#528444:bg#4096:fg#1024:\
+	:ph#511812:bh#4096:fh#1024:
+rd335H|rd335|2200A|HP6000/335H:\
+	:ty=winchester:ns#113:nt#4:nc#1449:\
+	:pa#16272:ba#8192:fa#1024:\
+	:pb#49720:\
+	:pc#654948:bc#4096:fc#1024:\
+	:pd#65992:\
+	:pe#304648:be#4096:fe#512:\
+	:pf#267584:bf#4096:ff#1024:\
+	:pg#588504:bg#4096:fg#1024:\
+	:ph#572232:bh#4096:fh#1024:
+rd670H|rd670|2203A|HP6000/670H:\
+	:ty=winchester:ns#113:nt#8:nc#1449:\
+	:pa#16272:ba#8192:fa#1024:\
+	:pb#67800:\
+	:pc#1309896:bc#4096:fc#1024:\
+	:pd#16272:\
+	:pe#305552:be#4096:fe#512:\
+	:pf#305552:bf#4096:ff#1024:\
+	:pg#1224920:bg#4096:fg#1024:\
+	:ph#597544:bh#4096:fh#1024:
+#
+# Utah derivatives
+#
+rd7937-utah|HP7937H with Utah partitions:\
+	:ty=winchester:ns#123:nt#13:nc#698:\
+	:pa#15990:ba#8192:fa#1024:\
+	:pb#67158:\
+	:pc#1116102:bc#4096:fc#1024:\
+	:pd#124722:bd#8192:fd#1024:\
+	:pe#163098:be#4096:fe#1024:\
+	:pf#287820:bf#4096:ff#1024:\
+	:pg#1031355:bg#4096:fg#512:\
+	:ph#455715:bh#4096:fh#1024:
+#
+# Antiques
+#
+rd9134D|HP9134D:\
+	:ty=winchester:ns#16:nt#6:nc#303:\
+	:pa#15936:ba#8192:fa#1024:\
+	:pb#13056:\
+	:pc#29088:bc#8192:fc#1024:
+rd9122|rd9122S|rd9122D|HP9122S/D:\
+	:ty=winchester:ns#8:nt#2:nc#77:\
+	:pc#1232:bc#8192:fc#1024:
+rd7912|rd7912P|HP7912P:\
+	:ty=winchester:ns#32:nt#7:nc#572:\
+	:pa#15904:ba#8192:fa#1024:\
+	:pb#22400:\
+	:pc#128128:bc#4096:fc#1024:\
+	:pd#42560:\
+	:pg#89600:bg#4096:fg#1024:\
+	:ph#69440:bh#4096:fh#1024:
+rd7914|rd7914P|rd7914CT|HP7914P/CT:\
+	:ty=winchester:ns#32:nt#7:nc#1152:\
+	:pa#15904:ba#8192:fa#1024:\
+	:pb#40320:\
+	:pc#258048:bc#4096:fc#1024:\
+	:pd#64960:\
+	:pe#98560:be#4096:fe#512:\
+	:pf#78400:bf#4096:ff#1024:\
+	:pg#201600:bg#4096:fg#1024:\
+	:ph#176960:bh#4096:fh#1024:
+#
+# SCSI disks
+# Again, these mapping support three basic layouts:
+# Again, these mapping support three basic layouts:
+#
+#	A/B/G:   This is the "traditional" setup for a bootable disk.
+#	         A is the root partition, B the swap, and G is for /usr
+#		 and users.
+#	A/D/E/F (large drives):
+#	A/D/H (small drives):
+#		 This is a setup for bootable systems requiring more swap
+#	         (e.g. those who need CL).  It has A as the root, D as a
+#	         larger swap, E and F (or H) as smaller user partitions.
+#		 E could  be used for /usr and F for users (or H for both).
+#		 Or, E could be used for /var and F for /usr and users.
+#	C:       This gives a single, non-bootable, large user filesystem.
+#	         Good for second drives on a machine as either /usr/src
+#		 or a large /usr or user partition.
+#
+#	A/B/G:   This is the "traditional" setup for a bootable disk.
+#	         A is the root partition, B the swap, and G is for /usr
+#		 and users.
+#	A/D/E/F (large drives):
+#	A/D/H (small drives):
+#		 This is a setup for bootable systems requiring more swap
+#	         (e.g. those who need CL).  It has A as the root, D as a
+#	         larger swap, E and F (or H) as smaller user partitions.
+#		 E could  be used for /usr and F for users (or H for both).
+#		 Or, E could be used for /var and F for /usr and users.
+#	C:       This gives a single, non-bootable, large user filesystem.
+#	         Good for second drives on a machine as either /usr/src
+#		 or a large /usr or user partition.
+#
+sd7958|sd7958-utah|HP7958S:\
+	:ty=winchester:ns#32:nt#6:nc#1643:\
+	:pa#16384:oa#1024:ba#8192:fa#1024:\
+	:pb#65536:ob#17408:\
+	:pc#315455:oc#0:bc#8192:fc#1024:\
+	:pd#98304:od#17408:\
+	:pe#102400:oe#115712:be#4096:fe#512:\
+	:pf#97343:of#218112:bf#4096:ff#1024:\
+	:pg#232511:og#82944:bg#8192:fg#1024:\
+	:ph#199743:oh#115712:bh#8192:fh#1024:
+sd7959|sd330|sd7959-utah|HP7959S:\
+	:ty=winchester:ns#32:nt#12:nc#1643:\
+	:pa#16384:oa#1024:ba#8192:fa#1024:\
+	:pb#65536:ob#17408:\
+	:pc#630911:oc#0:bc#8192:fc#1024:\
+	:pd#98304:od#17408:\
+	:pe#102400:oe#115712:be#4096:fe#512:\
+	:pf#412799:of#218112:bf#4096:ff#1024:\
+	:pg#547967:og#82944:bg#8192:fg#1024:\
+	:ph#515199:oh#115712:bh#8192:fh#1024:
+sd7548-utah|sd660|HP97548S with Utah partitions:\
+	:ty=winchester:ns#56:nt#16:nc#1447:\
+	:pa#16384:oa#1024:ba#8192:fa#1024:\
+	:pb#65536:ob#17408:\
+	:pc#1296511:oc#0:bc#8192:fc#1024:\
+	:pd#98304:od#17408:\
+	:pe#102400:oe#115712:be#4096:fe#512:\
+	:pf#1078399:of#218112:bf#4096:ff#1024:\
+	:pg#1213567:og#82944:bg#8192:fg#1024:\
+	:ph#1180799:oh#115712:bh#8192:fh#1024:
+#
+# HP magneto-optical drive.
+# (ns, nt, nc are totally bogus)
+# actually 1K sectors
+sd650-sony|mo650-sony|HP6300/650A Magneto-optical drive with Sony format:\
+	:ty=optical:ns#61:nt#8:nc#1306:\
+	:pa#16384:oa#1024:ba#8192:fa#1024:\
+	:pb#65536:ob#17408:\
+	:pc#637328:oc#0:bc#8192:fc#1024:\
+	:pd#98304:od#17408:\
+	:pe#102400:oe#115712:be#4096:fe#1024:\
+	:pf#419216:of#218112:bf#4096:ff#1024:\
+	:pg#554384:og#82944:bg#8192:fg#1024:
+sd650|mo650|mo650-ansi|HP6300/650A Magneto-optical with ANSI format drive:\
+	:ty=optical:ns#61:nt#8:nc#1306:\
+	:pa#16384:oa#1024:ba#8192:fa#1024:\
+	:pb#65536:ob#17408:\
+	:pc#629136:oc#0:bc#8192:fc#1024:\
+	:pd#98304:od#17408:\
+	:pe#102400:oe#115712:be#4096:fe#1024:\
+	:pf#411024:of#218112:bf#4096:ff#1024:\
+	:pg#546192:og#82944:bg#8192:fg#1024: