Retire it. Maintaining it (= syncing with GENERIC) is worthless
anymore. OK'ed by nsmrtsk.
This commit is contained in:
isaki
parent
b4a6515ec6
commit
a3708094fa
|
|
@ -1,448 +0,0 @@
|
||||||
# $NetBSD: ALL,v 1.57 2002/10/14 19:42:34 elric Exp $
|
|
||||||
|
|
||||||
#
|
|
||||||
# ALL -- everything that currently exist including experimental
|
|
||||||
#
|
|
||||||
|
|
||||||
include "arch/x68k/conf/std.x68k"
|
|
||||||
|
|
||||||
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
||||||
|
|
||||||
#ident "ALL-$Revision: 1.57 $"
|
|
||||||
|
|
||||||
maxusers 32
|
|
||||||
|
|
||||||
## System kernel configuration. See options(4) for more detail.
|
|
||||||
|
|
||||||
|
|
||||||
## Options for variants of the m68k MPU
|
|
||||||
## you must have at least the correct one; REQUIRED
|
|
||||||
options M68030
|
|
||||||
options M68040
|
|
||||||
options M68060
|
|
||||||
## If you want an optimized kernel for a specific processor, use either:
|
|
||||||
#makeoptions CMACHFLAGS="-m68030"
|
|
||||||
#makeoptions CMACHFLAGS="-m68040 -Wa,-m68030 -Wa,-m68851"
|
|
||||||
#makeoptions CMACHFLAGS="-m68060 -Wa,-m68030 -Wa,-m68851"
|
|
||||||
|
|
||||||
|
|
||||||
#### System options specific to the x68k port
|
|
||||||
|
|
||||||
options EXTENDED_MEMORY # support for >16MB memory
|
|
||||||
options FPU_EMULATE # software fpu emulation for MC68030
|
|
||||||
options FPSP # floating point emulation for MC68040
|
|
||||||
options M060SP # int/fp emulation for MC68060
|
|
||||||
#options JUPITER # support for "Jupiter-X" accelerator
|
|
||||||
options MAPPEDCOPY # use page mapping for large copyin/copyout
|
|
||||||
#options ZSCONSOLE,ZSCN_SPEED="9600" # use serial console
|
|
||||||
|
|
||||||
|
|
||||||
#### System options that are the same for all ports
|
|
||||||
|
|
||||||
## Root device configuration: change the ?'s if you are going to use a
|
|
||||||
## nonstandard root partition (other than where the kernel is booted from)
|
|
||||||
## and/or nonstandard root type (not ffs or nfs). Normally this can be
|
|
||||||
## automagically determined at boot time.
|
|
||||||
|
|
||||||
config netbsd root on ? type ?
|
|
||||||
#config netbsd root on sd0 type ffs
|
|
||||||
|
|
||||||
## RTC is offset from GMT; -540 means JST-9
|
|
||||||
options RTC_OFFSET=-540 # hardware clock is this many mins. west of GMT
|
|
||||||
|
|
||||||
## System call tracing (see ktrace(1)).
|
|
||||||
options KTRACE
|
|
||||||
|
|
||||||
## Collect statistics on kernel malloc's and free's. This does have a
|
|
||||||
## significant performance hit on slower machines, so it is intended for
|
|
||||||
## diagnostic use only.
|
|
||||||
options KMEMSTATS
|
|
||||||
|
|
||||||
## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2))
|
|
||||||
options SYSVMSG # System V message queues
|
|
||||||
options SYSVSEM # System V semaphores
|
|
||||||
#options SEMMNI=10 # number of semaphore identifiers
|
|
||||||
#options SEMMNS=60 # number of semaphores in system
|
|
||||||
#options SEMUME=10 # max number of undo entries per process
|
|
||||||
#options SEMMNU=30 # number of undo structures in system
|
|
||||||
options SYSVSHM # System V shared memory
|
|
||||||
#options SHMMAXPGS=1024 # 1024 pages is the default
|
|
||||||
|
|
||||||
## Loadable kernel module support
|
|
||||||
options LKM
|
|
||||||
|
|
||||||
options USERCONF # userconf(4) support
|
|
||||||
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
||||||
|
|
||||||
## NFS boot options; not supported currently: needs nfsboot program
|
|
||||||
#options NFS_BOOT_BOOTPARAM
|
|
||||||
#options NFS_BOOT_BOOTP
|
|
||||||
#options NFS_BOOT_DHCP
|
|
||||||
|
|
||||||
#### Debugging options
|
|
||||||
|
|
||||||
## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
|
|
||||||
## serial console break or keyboard reset, where the PROM would normally
|
|
||||||
## intercept. DDB_HISTORY_SIZE adds up/down arrow command history.
|
|
||||||
options DDB # kernel dynamic debugger
|
|
||||||
options DDB_HISTORY_SIZE=100 # enable history editing in DDB
|
|
||||||
#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
|
|
||||||
options PANICBUTTON # interrupt switch invokes DDB
|
|
||||||
|
|
||||||
## You may also use gdb, on another computer connected to this machine over
|
|
||||||
## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified;
|
|
||||||
## KGDB_DEV is a dev_t encoded device number of the serial port to use.
|
|
||||||
## KGDB is not supported for now.
|
|
||||||
#options KGDB # support for kernel gdb
|
|
||||||
#options KGDB_DEV=0xc00 # kgdb device number
|
|
||||||
#options KGDB_DEVRATE=9600 # baud rate
|
|
||||||
|
|
||||||
## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
|
|
||||||
## such that gdb(1) can be used on a kernel coredump.
|
|
||||||
|
|
||||||
#makeoptions DEBUG="-g"
|
|
||||||
|
|
||||||
## Adds code to the kernel that does internal consistency checks, and will
|
|
||||||
## cause the kernel to panic if corruption of internal data structures
|
|
||||||
## is detected.
|
|
||||||
options DIAGNOSTIC # extra kernel sanity checking
|
|
||||||
|
|
||||||
## Enable (possibly expensive) debugging code that may also display messages
|
|
||||||
## on the system console
|
|
||||||
options DEBUG
|
|
||||||
|
|
||||||
## These options enable verbose messages for several subsystems.
|
|
||||||
## Warning, these may compile large string tables into the kernel!
|
|
||||||
options SCSIVERBOSE # human readable SCSI error messages
|
|
||||||
options USBVERBOSE # verbose USB device autoconfig messages
|
|
||||||
|
|
||||||
## `INSECURE' turns off the kernel security level (securelevel = 0 always).
|
|
||||||
## This allows writing to /dev/mem, loading kernel modules while multi-user,
|
|
||||||
## and other insecurities good only for development work. Do not use this
|
|
||||||
## option on a production machine.
|
|
||||||
#options INSECURE
|
|
||||||
|
|
||||||
## Allow non-root users to grab /dev/console with programs such as xconsole.
|
|
||||||
## `xconsole' therefore does not need setuid root with this option enabled.
|
|
||||||
#options UCONSOLE
|
|
||||||
|
|
||||||
## `FDSCRIPTS' allows non-readable but executable scripts by providing a
|
|
||||||
## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS',
|
|
||||||
## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
|
|
||||||
## opaque file mechanism. Perl calls this "secure setuid scripts."
|
|
||||||
|
|
||||||
#options FDSCRIPTS
|
|
||||||
#options SETUIDSCRIPTS
|
|
||||||
|
|
||||||
## Options for compatibility with previous releases foreign system binaries.
|
|
||||||
|
|
||||||
options COMPAT_43 # 4.3BSD system interfaces
|
|
||||||
options COMPAT_09 # NetBSD 0.9 binary compatibility
|
|
||||||
options COMPAT_10 # NetBSD 1.0 binary compatibility
|
|
||||||
options COMPAT_11 # NetBSD 1.1 binary compatibility
|
|
||||||
options COMPAT_12 # NetBSD 1.2 binary compatibility
|
|
||||||
options COMPAT_13 # NetBSD 1.3 binary compatibility
|
|
||||||
options COMPAT_14 # NetBSD 1.4 binary compatibility
|
|
||||||
options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out
|
|
||||||
options COMPAT_M68K4K # NetBSD/m68k4k binaries
|
|
||||||
#options COMPAT_SUNOS # SunOS 4.x binary compatibility; broken
|
|
||||||
options COMPAT_SVR4 # SVR4 binary compatibility; broken
|
|
||||||
options COMPAT_LINUX # Linux/m68k binary compatibility
|
|
||||||
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
||||||
|
|
||||||
## File systems.
|
|
||||||
file-system FFS # Berkeley Fast Filesystem
|
|
||||||
file-system NFS # Sun NFS-compatible filesystem client
|
|
||||||
file-system KERNFS # kernel data-structure filesystem
|
|
||||||
file-system NULLFS # NULL layered filesystem (buggy)
|
|
||||||
file-system OVERLAY # overlay file system
|
|
||||||
file-system MFS # memory-based filesystem
|
|
||||||
file-system FDESC # user file descriptor filesystem
|
|
||||||
file-system UMAPFS # uid/gid remapping filesystem
|
|
||||||
file-system LFS # Log-structured filesystem (experimental)
|
|
||||||
file-system PORTAL # portal filesystem (experimental)
|
|
||||||
file-system PROCFS # /proc
|
|
||||||
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
||||||
file-system UNION # union file system (a little buggy)
|
|
||||||
file-system MSDOSFS # MS-DOS FAT filesystem(s).
|
|
||||||
file-system ADOSFS # AmigaDOS filesystem
|
|
||||||
|
|
||||||
## File system options.
|
|
||||||
options NFSSERVER # Sun NFS-compatible filesystem server
|
|
||||||
options QUOTA # FFS quotas
|
|
||||||
options FFS_EI # FFS Endian Independent support
|
|
||||||
options SOFTDEP # FFS soft updates support.
|
|
||||||
|
|
||||||
## Network protocol support. In most environments, INET is required.
|
|
||||||
options INET # IP (Internet Protocol) v4
|
|
||||||
options INET6 # IPV6
|
|
||||||
options IPSEC # IP security
|
|
||||||
options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
||||||
options IPSEC_DEBUG # debug for IP security
|
|
||||||
options GATEWAY # packet forwarding ("router switch")
|
|
||||||
options MROUTING # packet forwarding of multicast packets
|
|
||||||
#options DIRECTED_BROADCAST # allow broadcasts through routers
|
|
||||||
options NS # Xerox NS networking
|
|
||||||
#options NSIP # Xerox NS tunneling over IP
|
|
||||||
options ISO,TPIP # OSI networking
|
|
||||||
options EON # OSI tunneling over IP
|
|
||||||
#options CCITT,LLC,HDLC # X.25 packet switched protocol
|
|
||||||
options NETATALK # AppleTalk (over Ethernet) protocol
|
|
||||||
options NTP # Network Time Protocol in-kernel support
|
|
||||||
#options PPS_SYNC # Add serial line synchronization for NTP
|
|
||||||
options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs.
|
|
||||||
options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device
|
|
||||||
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
|
||||||
options PPP_BSDCOMP # Add BSD compression to ppp device
|
|
||||||
options PPP_DEFLATE # Add deflate (libz) compression to ppp device
|
|
||||||
options PPP_FILTER # Add active filters for ppp (via bpf)
|
|
||||||
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
||||||
|
|
||||||
|
|
||||||
#### Device configurations
|
|
||||||
|
|
||||||
## Fundamental devices; see also std.x68k
|
|
||||||
dmac0 at intio0 addr 0xe84000 # DMA controler
|
|
||||||
xel0 at intio0
|
|
||||||
opm0 at intio0 addr 0xe90000 # OPM: required for fdc
|
|
||||||
|
|
||||||
## Display devices and console
|
|
||||||
grfbus0 at mainbus0 # bitmapped displays
|
|
||||||
grf0 at grfbus0 # multiplane graphics
|
|
||||||
grf1 at grfbus0 # flexible graphics
|
|
||||||
|
|
||||||
kbd0 at mfp0 # standard keyboard
|
|
||||||
ite0 at grf0 # internal terminal emulator
|
|
||||||
options ITE_KERNEL_ATTR=4 # bold for kernel messages
|
|
||||||
# see /sys/arch/x68k/dev/itevar.h
|
|
||||||
pseudo-device pow 2 # software power switch
|
|
||||||
|
|
||||||
## floppy disks
|
|
||||||
fdc0 at intio0 addr 0xe94000 intr 96 dma 0 dmaintr 100 # floppy controler
|
|
||||||
fd* at fdc0 unit ? # builtin floppy drives
|
|
||||||
|
|
||||||
## SCSI devices
|
|
||||||
scsirom0 at intio0 addr 0xfc0000 # Built-in SCSI BIOS
|
|
||||||
scsirom1 at intio0 addr 0xea0020 # External SCSI BIOS
|
|
||||||
spc0 at scsirom0 # genuin SCSI
|
|
||||||
spc1 at scsirom1 # genuin SCSI
|
|
||||||
scsibus* at spc?
|
|
||||||
mha0 at scsirom1 # Mankai MK-HA1 (Mach-2)
|
|
||||||
scsibus* at mha0
|
|
||||||
|
|
||||||
sd* at scsibus? target ? lun ? # SCSI disks
|
|
||||||
cd* at scsibus? target ? lun ? # SCSI CD-ROMs
|
|
||||||
st* at scsibus? target ? lun ? # SCSI tapes
|
|
||||||
ss* at scsibus? target ? lun ? # SCSI scanners
|
|
||||||
ch* at scsibus? target ? lun ? # SCSI changer devices
|
|
||||||
uk* at scsibus? target ? lun ? # SCSI unknown devices
|
|
||||||
|
|
||||||
## Ports
|
|
||||||
zsc0 at intio0 addr 0xe98000 intr 112
|
|
||||||
zstty0 at zsc0 channel 0 # built-in RS-232C
|
|
||||||
ms0 at zsc0 channel 1 # standard mouse
|
|
||||||
zsc1 at intio0 addr 0xeafc00 intr 113
|
|
||||||
zstty2 at zsc1 channel 0
|
|
||||||
zstty3 at zsc1 channel 1
|
|
||||||
zsc2 at intio0 addr 0xeafc10 intr 114
|
|
||||||
zstty4 at zsc2 channel 0
|
|
||||||
zstty5 at zsc2 channel 1
|
|
||||||
par0 at intio0 addr 0xe8c000 # Builtin printer port
|
|
||||||
|
|
||||||
pseudo-device sram # battery-backuped static RAM
|
|
||||||
pseudo-device bell # OPM bell
|
|
||||||
|
|
||||||
xcom0 at mainbus0 # NS16550 fast serial
|
|
||||||
xcom1 at mainbus0
|
|
||||||
|
|
||||||
## Audio device
|
|
||||||
vs0 at intio0 addr 0xe92000 dma 3 dmaintr 106
|
|
||||||
audio* at vs?
|
|
||||||
|
|
||||||
## Network interfaces
|
|
||||||
ne* at intio0 addr 0xece300 intr 249 # Nereid Ethernet
|
|
||||||
ne* at intio0 addr 0xeceb00 intr 248 # Nereid Ethernet
|
|
||||||
neptune0 at intio0 addr 0xece000 intr 249 # Neptune-X
|
|
||||||
neptune1 at intio0 addr 0xece400 intr 249 # Neptune-X at alt. addr.
|
|
||||||
ne* at neptune? addr 0x300 # NE2000 or clone
|
|
||||||
|
|
||||||
|
|
||||||
## MII/PHY support for USB ethernet
|
|
||||||
acphy* at mii? phy ?
|
|
||||||
|
|
||||||
## USB Controller and Devices; Experimental
|
|
||||||
|
|
||||||
# Nereid USB controllers
|
|
||||||
slhci0 at intio0 addr 0xece380 intr 251
|
|
||||||
slhci1 at intio0 addr 0xeceb80 intr 250
|
|
||||||
#options SLHCI_DEBUG
|
|
||||||
|
|
||||||
# USB bus support
|
|
||||||
usb* at slhci?
|
|
||||||
|
|
||||||
# USB Hubs
|
|
||||||
uhub* at usb?
|
|
||||||
uhub* at uhub? port ? configuration ? interface ?
|
|
||||||
|
|
||||||
# USB HID device
|
|
||||||
uhidev* at uhub? port ? configuration ? interface ?
|
|
||||||
|
|
||||||
# USB Mice; not supported wscons yet
|
|
||||||
#ums* at uhidev? reportid ?
|
|
||||||
#wsmouse* at ums? mux 0
|
|
||||||
|
|
||||||
# USB Keyboards; not supported wscons yet
|
|
||||||
#ukbd* at uhidev? reportid ?
|
|
||||||
#wskbd* at ukbd? console ? mux 1
|
|
||||||
|
|
||||||
# USB Generic HID devices
|
|
||||||
uhid* at uhidev? reportid ?
|
|
||||||
|
|
||||||
# USB Printer
|
|
||||||
ulpt* at uhub? port ? configuration ? interface ?
|
|
||||||
|
|
||||||
# USB Modem
|
|
||||||
umodem* at uhub? port ? configuration ?
|
|
||||||
ucom* at umodem?
|
|
||||||
|
|
||||||
# USB Mass Storage; wd not supported
|
|
||||||
#umass* at uhub? port ? configuration ? interface ?
|
|
||||||
#atapibus* at umass? channel ?
|
|
||||||
#scsibus* at umass? channel ?
|
|
||||||
#wd* at umass?
|
|
||||||
|
|
||||||
# USB audio
|
|
||||||
uaudio* at uhub? port ? configuration ?
|
|
||||||
|
|
||||||
# USB MIDI
|
|
||||||
umidi* at uhub? port ? configuration ?
|
|
||||||
|
|
||||||
# USB IrDA
|
|
||||||
# USB-IrDA bridge spec
|
|
||||||
uirda* at uhub? port ? configuration ? interface ?
|
|
||||||
irframe* at uirda?
|
|
||||||
|
|
||||||
# SigmaTel STIr4200 USB/IrDA Bridge
|
|
||||||
ustir* at uhub? port ?
|
|
||||||
irframe* at ustir?
|
|
||||||
|
|
||||||
# USB Ethernet adapters
|
|
||||||
aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
|
|
||||||
cue* at uhub? port ? # CATC USB-EL1201A based adapters
|
|
||||||
kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
|
|
||||||
url* at uhub? port ? # Realtek RTL8150L based adapters
|
|
||||||
|
|
||||||
# Prolific PL2301/PL2302 host-to-host adapter
|
|
||||||
upl* at uhub? port ?
|
|
||||||
|
|
||||||
# Serial adapters
|
|
||||||
uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter
|
|
||||||
ucom* at uftdi? portno ?
|
|
||||||
|
|
||||||
umct* at uhub? port ? # MCT USB-RS232 serial adapter
|
|
||||||
ucom* at umct? portno ?
|
|
||||||
|
|
||||||
uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
|
|
||||||
ucom* at uplcom? portno ?
|
|
||||||
|
|
||||||
uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter
|
|
||||||
ucom* at uvscom? portno ?
|
|
||||||
|
|
||||||
# Diamond Multimedia Rio 500
|
|
||||||
urio* at uhub? port ?
|
|
||||||
|
|
||||||
# USB Handspring Visor
|
|
||||||
uvisor* at uhub? port ?
|
|
||||||
ucom* at uvisor?
|
|
||||||
|
|
||||||
# USB scanners
|
|
||||||
uscanner* at uhub? port ?
|
|
||||||
|
|
||||||
# USB scanners that use SCSI emulation, e.g., HP5300
|
|
||||||
usscanner* at uhub? port ?
|
|
||||||
scsibus* at usscanner? channel ?
|
|
||||||
|
|
||||||
# Y@P firmware loader
|
|
||||||
uyap* at uhub? port ?
|
|
||||||
|
|
||||||
# D-Link DSB-R100 USB radio
|
|
||||||
udsbr* at uhub? port ?
|
|
||||||
radio* at udsbr?
|
|
||||||
|
|
||||||
# USB Generic driver
|
|
||||||
ugen* at uhub? port ?
|
|
||||||
|
|
||||||
|
|
||||||
#### Pseudo devices
|
|
||||||
|
|
||||||
## A disk-like interface to files. Can be used to create floppy, CD,
|
|
||||||
## miniroot images, etc.
|
|
||||||
|
|
||||||
pseudo-device vnd 4
|
|
||||||
|
|
||||||
## Concatenated and striped disks; with this, you can create a software-based
|
|
||||||
## disk array similar to a "RAID 0" setup. See ccd(4).
|
|
||||||
|
|
||||||
pseudo-device ccd 4
|
|
||||||
|
|
||||||
## Cryptographic disk devices. See cgd(4).
|
|
||||||
|
|
||||||
pseudo-device cgd 4
|
|
||||||
|
|
||||||
## RAIDframe disk driver: software RAID driver. See raid(4).
|
|
||||||
|
|
||||||
pseudo-device raid 4
|
|
||||||
#options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
||||||
|
|
||||||
## Memory disk device, used on boot floppies with compressed
|
|
||||||
## kernel-plus-root-disk images.
|
|
||||||
|
|
||||||
#pseudo-device md 1
|
|
||||||
|
|
||||||
## Loopback network interface; required
|
|
||||||
pseudo-device loop
|
|
||||||
|
|
||||||
## SLIP and CSLIP interfaces, for IP over a serial line.
|
|
||||||
pseudo-device sl 2
|
|
||||||
|
|
||||||
## PPP, the successor to SLIP. See pppd(8).
|
|
||||||
pseudo-device ppp 2
|
|
||||||
|
|
||||||
## Network "tunnel" device, allowing protocol stacks to run in the userland.
|
|
||||||
## This is used by the third-party user-mode "ppp" program, and others.
|
|
||||||
pseudo-device tun 4
|
|
||||||
|
|
||||||
## Generic L3 over IP tunnel
|
|
||||||
#pseudo-device gre 2 # generic L3 over IP tunnel
|
|
||||||
|
|
||||||
## Berkeley Packet Filter, required to run RARPD. A generic C-language
|
|
||||||
## interface that allows selective examining of incoming packets.
|
|
||||||
pseudo-device bpfilter 8
|
|
||||||
|
|
||||||
## IP Filter, used in firewall and NAT applications. See ipnat(8) for
|
|
||||||
## one example of the use of the IP Filter.
|
|
||||||
pseudo-device ipfilter
|
|
||||||
|
|
||||||
## for IPv6
|
|
||||||
pseudo-device gif 1 # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
||||||
pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
|
||||||
pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
|
||||||
|
|
||||||
## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4).
|
|
||||||
pseudo-device vlan
|
|
||||||
|
|
||||||
## Simple inter-network traffic bridging
|
|
||||||
pseudo-device bridge
|
|
||||||
|
|
||||||
#### Other device configuration
|
|
||||||
|
|
||||||
## Pseudo ttys, required for network logins and programs like screen.
|
|
||||||
|
|
||||||
pseudo-device pty # pseudo-terminals
|
|
||||||
|
|
||||||
## Random device, used to implement /dev/random (a source of random noise),
|
|
||||||
## and generate randomness for some kernel formulae.
|
|
||||||
|
|
||||||
pseudo-device rnd
|
|
||||||
|
|
||||||
pseudo-device clockctl # user control of clock subsystem
|
|
||||||
Loading…
Reference in New Issue