Make this test somewhat deterministic - far fewer races, and most
of what are left are "race for the bus" type - if we lose, we just wait for the next one ... slower but still reliable. There are two exceptions ... when starting more than one rtadvd (on different routers) we expect to receive an RA from each, but all that we can check is that we received the (at least) right number of RAs. It is possible (though unlikely) that one router sent two before another sent any, in which case we will not have the data we expect, and a sub-test will fail. Second, there is no way to know for sure that we have waited long enough when we're waiting for data to expire - in systems with correctly working clocks that actually measure time, this should not be an issue, if data is due to expire in < 5 seconds, and we wait 5 seconds, and the data is still there, then that indicates a failure, which should be detected. Unfortunately with QEMU testing time just isn't that reliable. But fortunately, it is generally the sleep which takes longer, while other timers run correctly, which is the way that makes us happy... While here lots of cleanups - everything from white space and line wrapping, to removing superfluous quotes and adding some (but probably not enough) that are not (though given the data is all known here, lack of quotes will rarely hurt.) Also take note of the fact that current rtadvd *cannot* delete its pidfile, so waiting for that file to be removed is doomed to failure. Do things in a way that works, rather than simply resorting to assassination. Because we do a lot less "sleep and hope it is long enough" and more "wait until it is observed to happen" the tests generally run in less elapsed time than before (20% less has been observed.) But because we "wait until it is observed to happen" rather than just "sleep and hope it is long enough" sometimes things take longer (and when that happens, we no longer fail). Up to 7% slower (overall) has been observed. (Observations on an amd64 DomU, no idea yet as to what QEMU might observe.)
This commit is contained in:
kre
parent
47a40a7318
commit
9fefbad1a9
@ -1,4 +1,4 @@
|
||||
# $NetBSD: t_ra.sh,v 1.31 2017/11/07 02:19:23 ozaki-r Exp $
|
||||
# $NetBSD: t_ra.sh,v 1.32 2017/11/25 07:58:47 kre Exp $
|
||||
#
|
||||
# Copyright (c) 2015 Internet Initiative Japan Inc.
|
||||
# All rights reserved.
|
||||
@ -43,14 +43,16 @@ PIDFILE1_2=./rump.rtadvd.pid12
|
||||
PIDFILE3=./rump.rtadvd.pid3
|
||||
PIDFILE4=./rump.rtadvd.pid4
|
||||
CONFIG=./rtadvd.conf
|
||||
WAITTIME=2
|
||||
DEBUG=${DEBUG:-false}
|
||||
|
||||
RUMP_PROGS="rump_server rump.rtadvd rump.ndp rump.ifconfig rump.netstat"
|
||||
|
||||
init_server()
|
||||
{
|
||||
|
||||
export RUMP_SERVER=$1
|
||||
atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.forwarding=1
|
||||
atf_check -s exit:0 -o match:'0.->.1' \
|
||||
rump.sysctl -w net.inet6.ip6.forwarding=1
|
||||
export LD_PRELOAD=/usr/lib/librumphijack.so
|
||||
atf_check -s exit:0 mkdir -p /rump/var/chroot/rtadvd
|
||||
unset LD_PRELOAD
|
||||
@ -72,25 +74,17 @@ setup_shmif0()
|
||||
$DEBUG && rump.ifconfig
|
||||
}
|
||||
|
||||
wait_term()
|
||||
{
|
||||
local PIDFILE=${1}
|
||||
shift
|
||||
|
||||
while [ -f ${PIDFILE} ]
|
||||
do
|
||||
sleep 0.2
|
||||
done
|
||||
|
||||
return 0
|
||||
}
|
||||
|
||||
kill_rtadvd()
|
||||
{
|
||||
local pidfile=$1
|
||||
local pid=$(cat "$1")
|
||||
|
||||
kill -KILL `cat $pidfile`
|
||||
rm -f $pidfile
|
||||
test -n "$pid" && {
|
||||
case "$pid" in
|
||||
*[!0-9]*) return 1;;
|
||||
esac
|
||||
test "$pid" -gt 1 && kill -s KILL "${pid}"
|
||||
}
|
||||
rm -f "$1"
|
||||
}
|
||||
|
||||
terminate_rtadvd()
|
||||
@ -98,102 +92,131 @@ terminate_rtadvd()
|
||||
local pidfile=$1
|
||||
local n=5
|
||||
|
||||
if [ ! -f $pidfile ]; then
|
||||
if ! [ -f "$pidfile" ]; then
|
||||
return
|
||||
fi
|
||||
|
||||
kill -TERM `cat $pidfile`
|
||||
while [ -f $pidfile ]; do
|
||||
local pid=$(cat "$pidfile")
|
||||
|
||||
test -n "${pid}" && kill -s TERM "${pid}"
|
||||
|
||||
# Note, rtadvd cannot remove its own pidfile, it chroots after
|
||||
# creating it (and if it chroot'd first, we would not be able to
|
||||
# control where it puts the thing, and so it would be useless.)
|
||||
# However, it does truncate it... so watch for that.
|
||||
while [ -s "$pidfile" ]; do
|
||||
n=$((n - 1))
|
||||
if [ $n = 0 ]; then
|
||||
kill_rtadvd $pidfile
|
||||
break
|
||||
if [ "$n" = 0 ]; then
|
||||
kill_rtadvd "$pidfile"
|
||||
return
|
||||
fi
|
||||
sleep 0.2
|
||||
done
|
||||
# and finally complete the cleanup that rtadvd did not do.
|
||||
rm -f "$pidfile"
|
||||
}
|
||||
|
||||
create_rtadvdconfig()
|
||||
{
|
||||
|
||||
cat << _EOF > ${CONFIG}
|
||||
shmif0:\
|
||||
shmif0:\\
|
||||
:mtu#1300:maxinterval#4:mininterval#3:
|
||||
_EOF
|
||||
}
|
||||
|
||||
create_rtadvdconfig_rltime()
|
||||
{
|
||||
local time=$1
|
||||
|
||||
cat << _EOF > ${CONFIG}
|
||||
shmif0:\
|
||||
:mtu#1300:maxinterval#4:mininterval#3:rltime#$time:
|
||||
shmif0:\\
|
||||
:mtu#1300:maxinterval#4:mininterval#3:rltime#$1:
|
||||
_EOF
|
||||
$DEBUG && cat ${CONFIG}
|
||||
}
|
||||
|
||||
create_rtadvdconfig_vltime()
|
||||
{
|
||||
local addr=$1
|
||||
local time=$2
|
||||
|
||||
cat << _EOF > ${CONFIG}
|
||||
shmif0:\
|
||||
:mtu#1300:maxinterval#4:mininterval#3:addr="$addr":vltime#$time:
|
||||
shmif0:\\
|
||||
:mtu#1300:maxinterval#4:mininterval#3:addr="$1":vltime#$2:
|
||||
_EOF
|
||||
$DEBUG && cat ${CONFIG}
|
||||
}
|
||||
|
||||
start_rtadvd()
|
||||
RA_count()
|
||||
{
|
||||
local sock=$1
|
||||
local pidfile=$2
|
||||
RUMP_SERVER="$1" rump.netstat -p icmp6 | sed -n '
|
||||
$ {
|
||||
s/^.*$/0/p
|
||||
q
|
||||
}
|
||||
/router advertisement:/!d
|
||||
s/.*router advertisement: *//
|
||||
s/[ ]*$//
|
||||
s/^$/0/
|
||||
p
|
||||
q
|
||||
'
|
||||
}
|
||||
|
||||
export RUMP_SERVER=$sock
|
||||
atf_check -s exit:0 -e ignore \
|
||||
rump.rtadvd -D -c ${CONFIG} -p $pidfile shmif0
|
||||
while [ ! -f $pidfile ]; do
|
||||
await_RA()
|
||||
{
|
||||
local N=$(RA_count "$1")
|
||||
while [ "$(RA_count "$1")" -le "$N" ]; do
|
||||
sleep 0.2
|
||||
done
|
||||
unset RUMP_SERVER
|
||||
}
|
||||
|
||||
start_rtadvd()
|
||||
{
|
||||
local RUMP_SERVER="$1"
|
||||
export RUMP_SERVER
|
||||
|
||||
atf_check -s exit:0 -e ignore \
|
||||
rump.rtadvd -D -c ${CONFIG} -p "$2" shmif0
|
||||
|
||||
# don't wait for the pid file to appear and get a pid in it.
|
||||
# we look for receiving RAs instead, must more reliable
|
||||
# extra delay here increases possibility of RA arriving before
|
||||
# we start looking (which means we then wait for the next .. boring!)
|
||||
}
|
||||
|
||||
check_entries()
|
||||
{
|
||||
local cli=$1
|
||||
local RUMP_SERVER="$1"
|
||||
local srv=$2
|
||||
local addr_prefix=$3
|
||||
local mac_srv= ll_srv=
|
||||
export RUMP_SERVER
|
||||
|
||||
ll_srv=$(get_linklocal_addr $srv shmif0)
|
||||
mac_srv=$(get_macaddr $srv shmif0)
|
||||
ll_srv=$(get_linklocal_addr "$srv" shmif0)
|
||||
mac_srv=$(get_macaddr "$srv" shmif0)
|
||||
|
||||
export RUMP_SERVER=$cli
|
||||
$DEBUG && dump_entries
|
||||
atf_check -s exit:0 -o match:'if=shmif0' rump.ndp -r
|
||||
atf_check -s exit:0 -o match:'advertised' rump.ndp -p
|
||||
atf_check -s exit:0 -o match:"${ll_srv}%shmif0 \(reachable\)" rump.ndp -p
|
||||
atf_check -s exit:0 -o match:'linkmtu=1300' rump.ndp -n -i shmif0
|
||||
atf_check -s exit:0 -o match:if=shmif0 rump.ndp -r
|
||||
atf_check -s exit:0 -o match:advertised \
|
||||
-o match:"${ll_srv}%shmif0 \(reachable\)" \
|
||||
rump.ndp -p
|
||||
atf_check -s exit:0 -o match:linkmtu=1300 rump.ndp -n -i shmif0
|
||||
atf_check -s exit:0 \
|
||||
-o match:"$ll_srv%shmif0 +$mac_srv +shmif0 +$ONEDAYISH S R" \
|
||||
rump.ndp -n -a
|
||||
atf_check -s exit:0 -o not-match:$addr_prefix rump.ndp -n -a
|
||||
-o not-match:"$addr_prefix" \
|
||||
rump.ndp -n -a
|
||||
atf_check -s exit:0 \
|
||||
-o match:"$addr_prefix.+<(TENTATIVE,)?AUTOCONF>" \
|
||||
rump.ifconfig shmif0 inet6
|
||||
unset RUMP_SERVER
|
||||
}
|
||||
|
||||
dump_entries()
|
||||
{
|
||||
local marker="+-+-+-+-+-+-+-+-+"
|
||||
|
||||
echo ndp -n -a
|
||||
printf '%s %s\n' "$marker" 'ndp -n -a'
|
||||
rump.ndp -n -a
|
||||
echo ndp -p
|
||||
printf '%s %s\n' "$marker" 'ndp -p'
|
||||
rump.ndp -p
|
||||
echo ndp -r
|
||||
printf '%s %s\n' "$marker" 'ndp -r'
|
||||
rump.ndp -r
|
||||
printf '%s\n' "$marker"
|
||||
}
|
||||
|
||||
atf_test_case ra_basic cleanup
|
||||
@ -201,7 +224,7 @@ ra_basic_head()
|
||||
{
|
||||
|
||||
atf_set "descr" "Tests for basic functions of router advaertisement(RA)"
|
||||
atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig"
|
||||
atf_set "require.progs" "${RUMP_PROGS}"
|
||||
}
|
||||
|
||||
ra_basic_body()
|
||||
@ -216,30 +239,30 @@ ra_basic_body()
|
||||
setup_shmif0 ${RUMPCLI} ${IP6CLI}
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
$DEBUG && rump.ndp -n -a
|
||||
atf_check -s exit:0 -o match:'= 0' rump.sysctl net.inet6.ip6.accept_rtadv
|
||||
atf_check -s exit:0 -o match:'= 0' \
|
||||
rump.sysctl net.inet6.ip6.accept_rtadv
|
||||
unset RUMP_SERVER
|
||||
|
||||
create_rtadvdconfig
|
||||
start_rtadvd $RUMPSRV $PIDFILE
|
||||
sleep $WAITTIME
|
||||
await_RA "${RUMPCLI}"
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
atf_check -s exit:0 -o empty rump.ndp -r
|
||||
atf_check -s exit:0 -o not-match:'advertised' rump.ndp -p
|
||||
atf_check -s exit:0 -o match:'linkmtu=0' rump.ndp -n -i shmif0
|
||||
atf_check -s exit:0 -o not-match:'S R' rump.ndp -n -a
|
||||
atf_check -s exit:0 -o not-match:'fc00:1:' rump.ndp -n -a
|
||||
atf_check -s exit:0 -o not-match:'fc00:1:' rump.ifconfig shmif0 inet6
|
||||
atf_check -s exit:0 -o not-match:advertised rump.ndp -p
|
||||
atf_check -s exit:0 -o match:linkmtu=0 rump.ndp -n -i shmif0
|
||||
atf_check -s exit:0 -o not-match:'S R' -o not-match:fc00:1: \
|
||||
rump.ndp -n -a
|
||||
atf_check -s exit:0 -o not-match:fc00:1: rump.ifconfig shmif0 inet6
|
||||
unset RUMP_SERVER
|
||||
|
||||
terminate_rtadvd $PIDFILE
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
unset RUMP_SERVER
|
||||
RUMP_SERVER=${RUMPCLI} atf_check -s exit:0 -o match:'0 -> 1' \
|
||||
rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
|
||||
start_rtadvd $RUMPSRV $PIDFILE
|
||||
sleep $WAITTIME
|
||||
await_RA "${RUMPCLI}"
|
||||
|
||||
check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX
|
||||
|
||||
@ -261,7 +284,7 @@ ra_flush_prefix_entries_head()
|
||||
{
|
||||
|
||||
atf_set "descr" "Tests for flushing prefixes (ndp -P)"
|
||||
atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig"
|
||||
atf_set "require.progs" "${RUMP_PROGS}"
|
||||
}
|
||||
|
||||
ra_flush_prefix_entries_body()
|
||||
@ -278,29 +301,29 @@ ra_flush_prefix_entries_body()
|
||||
create_rtadvdconfig
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
atf_check -s exit:0 -o match:'0 -> 1' \
|
||||
rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
unset RUMP_SERVER
|
||||
|
||||
start_rtadvd $RUMPSRV $PIDFILE
|
||||
sleep $WAITTIME
|
||||
await_RA "${RUMPCLI}"
|
||||
|
||||
check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
|
||||
# Terminate rtadvd to prevent new RA messages from coming
|
||||
# Note that ifconfig down; kill -TERM doesn't work
|
||||
kill_rtadvd $PIDFILE
|
||||
terminate_rtadvd $PIDFILE
|
||||
|
||||
# Flush all the entries in the prefix list
|
||||
atf_check -s exit:0 rump.ndp -P
|
||||
|
||||
$DEBUG && dump_entries
|
||||
atf_check -s exit:0 -o match:'if=shmif0' rump.ndp -r
|
||||
atf_check -s exit:0 -o match:if=shmif0 rump.ndp -r
|
||||
atf_check -s exit:0 -o empty rump.ndp -p
|
||||
atf_check -s exit:0 -o match:'linkmtu=1300' rump.ndp -n -i shmif0
|
||||
atf_check -s exit:0 -o match:"$ONEDAYISH S R" rump.ndp -n -a
|
||||
atf_check -s exit:0 -o not-match:'fc00:1:' rump.ndp -n -a
|
||||
atf_check -s exit:0 -o match:linkmtu=1300 rump.ndp -n -i shmif0
|
||||
atf_check -s exit:0 -o match:"$ONEDAYISH S R" -o not-match:fc00:1: \
|
||||
rump.ndp -n -a
|
||||
atf_check -s exit:0 -o not-match:'fc00:1:' rump.ifconfig shmif0 inet6
|
||||
unset RUMP_SERVER
|
||||
|
||||
@ -320,7 +343,7 @@ ra_flush_defrouter_entries_head()
|
||||
{
|
||||
|
||||
atf_set "descr" "Tests for flushing default routers (ndp -R)"
|
||||
atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig"
|
||||
atf_set "require.progs" "${RUMP_PROGS}"
|
||||
}
|
||||
|
||||
ra_flush_defrouter_entries_body()
|
||||
@ -336,20 +359,18 @@ ra_flush_defrouter_entries_body()
|
||||
|
||||
create_rtadvdconfig
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
unset RUMP_SERVER
|
||||
RUMP_SERVER=${RUMPCLI} atf_check -s exit:0 -o match:'0 -> 1' \
|
||||
rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
|
||||
start_rtadvd $RUMPSRV $PIDFILE
|
||||
sleep $WAITTIME
|
||||
await_RA "${RUMPCLI}"
|
||||
|
||||
check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
|
||||
# Terminate rtadvd to prevent new RA messages from coming
|
||||
# Note that ifconfig down; kill -TERM doesn't work
|
||||
kill_rtadvd $PIDFILE
|
||||
terminate_rtadvd $PIDFILE
|
||||
|
||||
# Flush all the entries in the default router list
|
||||
atf_check -s exit:0 rump.ndp -R
|
||||
@ -357,8 +378,8 @@ ra_flush_defrouter_entries_body()
|
||||
$DEBUG && dump_entries
|
||||
atf_check -s exit:0 -o empty rump.ndp -r
|
||||
atf_check -s exit:0 -o match:'No advertising router' rump.ndp -p
|
||||
atf_check -s exit:0 -o match:'linkmtu=1300' rump.ndp -n -i shmif0
|
||||
atf_check -s exit:0 -o not-match:'fc00:1:' rump.ndp -n -a
|
||||
atf_check -s exit:0 -o match:linkmtu=1300 rump.ndp -n -i shmif0
|
||||
atf_check -s exit:0 -o not-match:fc00:1: rump.ndp -n -a
|
||||
atf_check -s exit:0 -o match:'fc00:1:' rump.ifconfig shmif0 inet6
|
||||
unset RUMP_SERVER
|
||||
|
||||
@ -378,7 +399,7 @@ ra_delete_address_head()
|
||||
{
|
||||
|
||||
atf_set "descr" "Tests for deleting auto-configured address"
|
||||
atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig"
|
||||
atf_set "require.progs" "${RUMP_PROGS}"
|
||||
}
|
||||
|
||||
ra_delete_address_body()
|
||||
@ -394,19 +415,18 @@ ra_delete_address_body()
|
||||
|
||||
create_rtadvdconfig
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
unset RUMP_SERVER
|
||||
RUMP_SERVER=${RUMPCLI} atf_check -s exit:0 -o match:'0 -> 1' \
|
||||
rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
|
||||
start_rtadvd $RUMPSRV $PIDFILE
|
||||
sleep $WAITTIME
|
||||
await_RA "${RUMPCLI}"
|
||||
|
||||
check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
$DEBUG && rump.ifconfig shmif0
|
||||
atf_check -s exit:0 rump.ifconfig shmif0 inet6 \
|
||||
$(rump.ifconfig shmif0 |awk '/AUTOCONF/ {print $2}') delete
|
||||
$(rump.ifconfig shmif0 | awk '/AUTOCONF/ {print $2}') delete
|
||||
unset RUMP_SERVER
|
||||
|
||||
terminate_rtadvd $PIDFILE
|
||||
@ -427,7 +447,7 @@ ra_multiple_routers_head()
|
||||
{
|
||||
|
||||
atf_set "descr" "Tests for multiple routers"
|
||||
atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig"
|
||||
atf_set "require.progs" "${RUMP_PROGS}"
|
||||
}
|
||||
|
||||
ra_multiple_routers_body()
|
||||
@ -447,22 +467,20 @@ ra_multiple_routers_body()
|
||||
|
||||
create_rtadvdconfig
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
unset RUMP_SERVER
|
||||
RUMP_SERVER=${RUMPCLI} atf_check -s exit:0 -o match:'0 -> 1' \
|
||||
rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
|
||||
start_rtadvd $RUMPSRV $PIDFILE
|
||||
start_rtadvd $RUMPSRV3 $PIDFILE3
|
||||
sleep $WAITTIME
|
||||
await_RA "${RUMPCLI}"
|
||||
await_RA "${RUMPCLI}"
|
||||
|
||||
check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX
|
||||
check_entries $RUMPCLI $RUMPSRV3 $IP6SRV3_PREFIX
|
||||
|
||||
export RUMP_SERVER=$RUMPCLI
|
||||
# Two prefixes are advertised by differnt two routers
|
||||
n=$(rump.ndp -p |grep 'advertised by' |wc -l)
|
||||
n=$(RUMP_SERVER=$RUMPCLI rump.ndp -p | grep 'advertised by' | wc -l)
|
||||
atf_check_equal $n 2
|
||||
unset RUMP_SERVER
|
||||
|
||||
terminate_rtadvd $PIDFILE
|
||||
terminate_rtadvd $PIDFILE3
|
||||
@ -484,7 +502,7 @@ ra_multiple_routers_single_prefix_head()
|
||||
{
|
||||
|
||||
atf_set "descr" "Tests for multiple routers with a single prefix"
|
||||
atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig"
|
||||
atf_set "require.progs" "${RUMP_PROGS}"
|
||||
}
|
||||
|
||||
ra_multiple_routers_single_prefix_body()
|
||||
@ -504,13 +522,13 @@ ra_multiple_routers_single_prefix_body()
|
||||
|
||||
create_rtadvdconfig
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
atf_check -s exit:0 -o match:'0.->.1' rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
unset RUMP_SERVER
|
||||
RUMP_SERVER=${RUMPCLI} atf_check -s exit:0 -o match:'0 -> 1' \
|
||||
rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
|
||||
start_rtadvd $RUMPSRV $PIDFILE
|
||||
start_rtadvd $RUMPSRV1_2 $PIDFILE1_2
|
||||
sleep $WAITTIME
|
||||
await_RA "${RUMPCLI}"
|
||||
await_RA "${RUMPCLI}"
|
||||
|
||||
check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX
|
||||
check_entries $RUMPCLI $RUMPSRV1_2 $IP6SRV_PREFIX
|
||||
@ -541,7 +559,7 @@ ra_multiple_routers_maxifprefixes_head()
|
||||
{
|
||||
|
||||
atf_set "descr" "Tests for exceeding the number of maximum prefixes"
|
||||
atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig"
|
||||
atf_set "require.progs" "${RUMP_PROGS}"
|
||||
}
|
||||
|
||||
ra_multiple_routers_maxifprefixes_body()
|
||||
@ -564,31 +582,28 @@ ra_multiple_routers_maxifprefixes_body()
|
||||
|
||||
create_rtadvdconfig
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
atf_check -s exit:0 -o match:'0.->.1' \
|
||||
RUMP_SERVER=${RUMPCLI} atf_check -s exit:0 -o match:'0.->.1' \
|
||||
rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
# Limit the maximum number of prefix entries to 2
|
||||
atf_check -s exit:0 -o match:'16.->.2' \
|
||||
RUMP_SERVER=${RUMPCLI} atf_check -s exit:0 -o match:'16 -> 2' \
|
||||
rump.sysctl -w net.inet6.ip6.maxifprefixes=2
|
||||
unset RUMP_SERVER
|
||||
|
||||
start_rtadvd $RUMPSRV $PIDFILE
|
||||
start_rtadvd $RUMPSRV3 $PIDFILE3
|
||||
sleep $WAITTIME
|
||||
await_RA "${RUMPCLI}"
|
||||
await_RA "${RUMPCLI}"
|
||||
|
||||
check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX
|
||||
check_entries $RUMPCLI $RUMPSRV3 $IP6SRV3_PREFIX
|
||||
|
||||
start_rtadvd $RUMPSRV4 $PIDFILE4
|
||||
sleep $WAITTIME
|
||||
await_RA "${RUMPCLI}"
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
$DEBUG && dump_entries
|
||||
$DEBUG && RUMP_SERVER="${RUMPCLI}" dump_entries
|
||||
# There should remain two prefixes
|
||||
n=$(rump.ndp -p |grep 'advertised by' |wc -l)
|
||||
n=$(RUMP_SERVER=${RUMPCLI} rump.ndp -p | grep 'advertised by' | wc -l)
|
||||
atf_check_equal $n 2
|
||||
# TODO check other conditions
|
||||
unset RUMP_SERVER
|
||||
|
||||
terminate_rtadvd $PIDFILE
|
||||
terminate_rtadvd $PIDFILE3
|
||||
@ -612,7 +627,7 @@ ra_temporary_address_head()
|
||||
{
|
||||
|
||||
atf_set "descr" "Tests for IPv6 temporary address"
|
||||
atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig"
|
||||
atf_set "require.progs" "${RUMP_PROGS}"
|
||||
}
|
||||
|
||||
check_echo_request_pkt()
|
||||
@ -620,7 +635,7 @@ check_echo_request_pkt()
|
||||
local pkt="$2 > $3: .+ echo request"
|
||||
|
||||
extract_new_packets $1 > ./out
|
||||
$DEBUG && echo $pkt
|
||||
$DEBUG && echo "$pkt"
|
||||
$DEBUG && cat ./out
|
||||
atf_check -s exit:0 -o match:"$pkt" cat ./out
|
||||
}
|
||||
@ -636,16 +651,14 @@ ra_temporary_address_body()
|
||||
init_server $RUMPSRV
|
||||
setup_shmif0 $RUMPCLI $IP6CLI
|
||||
|
||||
export RUMP_SERVER=$RUMPCLI
|
||||
atf_check -s exit:0 -o match:'0.->.1' \
|
||||
RUMP_SERVER=$RUMPCLI atf_check -s exit:0 -o match:'0 -> 1' \
|
||||
rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
atf_check -s exit:0 -o match:'0.->.1' \
|
||||
RUMP_SERVER=$RUMPCLI atf_check -s exit:0 -o match:'0 -> 1' \
|
||||
rump.sysctl -w net.inet6.ip6.use_tempaddr=1
|
||||
unset RUMP_SERVER
|
||||
|
||||
create_rtadvdconfig
|
||||
start_rtadvd $RUMPSRV $PIDFILE
|
||||
sleep $WAITTIME
|
||||
await_RA "${RUMPCLI}"
|
||||
|
||||
check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX
|
||||
|
||||
@ -661,9 +674,11 @@ ra_temporary_address_body()
|
||||
#
|
||||
atf_check -s exit:0 rump.ifconfig -w 10
|
||||
$DEBUG && rump.ifconfig shmif0
|
||||
ip_auto=$(rump.ifconfig shmif0 |awk '/<AUTOCONF>/ {sub(/\/[0-9]*/, ""); print $2;}')
|
||||
ip_temp=$(rump.ifconfig shmif0 |awk '/<AUTOCONF,TEMPORARY>/ {sub(/\/[0-9]*/, ""); print $2;}')
|
||||
$DEBUG && echo $ip_auto $ip_temp
|
||||
ip_auto=$(rump.ifconfig shmif0 |
|
||||
awk '/<AUTOCONF>/ {sub(/\/[0-9]*/, ""); print $2;}')
|
||||
ip_temp=$(rump.ifconfig shmif0 |
|
||||
awk '/<AUTOCONF,TEMPORARY>/ {sub(/\/[0-9]*/, ""); print $2;}')
|
||||
$DEBUG && echo "AUTO=$ip_auto TEMP=$ip_temp"
|
||||
|
||||
# Ignore old packets
|
||||
extract_new_packets bus1 > /dev/null
|
||||
@ -673,7 +688,7 @@ ra_temporary_address_body()
|
||||
check_echo_request_pkt bus1 $ip_auto $IP6SRV
|
||||
|
||||
# Enable net.inet6.ip6.prefer_tempaddr
|
||||
atf_check -s exit:0 -o match:'0.->.1' \
|
||||
atf_check -s exit:0 -o match:'0 -> 1' \
|
||||
rump.sysctl -w net.inet6.ip6.prefer_tempaddr=1
|
||||
|
||||
atf_check -s exit:0 -o ignore rump.ping6 -n -X 2 -c 1 $IP6SRV
|
||||
@ -700,7 +715,7 @@ ra_defrouter_expiration_head()
|
||||
{
|
||||
|
||||
atf_set "descr" "Tests for default router expiration"
|
||||
atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig"
|
||||
atf_set "require.progs" "${RUMP_PROGS}"
|
||||
}
|
||||
|
||||
ra_defrouter_expiration_body()
|
||||
@ -717,36 +732,37 @@ ra_defrouter_expiration_body()
|
||||
|
||||
create_rtadvdconfig_rltime $expire_time
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
atf_check -s exit:0 -o match:'0.->.1' \
|
||||
RUMP_SERVER=${RUMPCLI} atf_check -s exit:0 -o match:'0.->.1' \
|
||||
rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
unset RUMP_SERVER
|
||||
|
||||
start_rtadvd $RUMPSRV $PIDFILE
|
||||
sleep $WAITTIME
|
||||
await_RA "${RUMPCLI}"
|
||||
|
||||
check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
|
||||
# Terminate rtadvd to prevent new RA messages from coming
|
||||
# Note that ifconfig down; kill -TERM doesn't work
|
||||
kill_rtadvd $PIDFILE
|
||||
terminate_rtadvd $PIDFILE
|
||||
|
||||
# Wait until the default routers and prefix entries are expired
|
||||
# XXX need to work out a better way ... this is a race.
|
||||
# XXX fortunately this race usually ends with the winner we want
|
||||
# XXX (long odds on - not worth placing a bet...)
|
||||
sleep $expire_time
|
||||
|
||||
$DEBUG && dump_entries
|
||||
|
||||
# Give nd6_timer a chance to sweep default routers and prefix entries
|
||||
# XXX Ugh again.
|
||||
sleep 2
|
||||
|
||||
$DEBUG && dump_entries
|
||||
atf_check -s exit:0 -o not-match:'if=shmif0' rump.ndp -r
|
||||
atf_check -s exit:0 -o not-match:if=shmif0 rump.ndp -r
|
||||
atf_check -s exit:0 -o match:'No advertising router' rump.ndp -p
|
||||
atf_check -s exit:0 -o match:'linkmtu=1300' rump.ndp -n -i shmif0
|
||||
atf_check -s exit:0 -o not-match:'fc00:1:' rump.ndp -n -a
|
||||
atf_check -s exit:0 -o match:'fc00:1:' rump.ifconfig shmif0 inet6
|
||||
atf_check -s exit:0 -o match:linkmtu=1300 rump.ndp -n -i shmif0
|
||||
atf_check -s exit:0 -o not-match:fc00:1: rump.ndp -n -a
|
||||
atf_check -s exit:0 -o match:fc00:1: rump.ifconfig shmif0 inet6
|
||||
unset RUMP_SERVER
|
||||
|
||||
rump_server_destroy_ifaces
|
||||
@ -765,7 +781,7 @@ ra_prefix_expiration_head()
|
||||
{
|
||||
|
||||
atf_set "descr" "Tests for prefix expiration"
|
||||
atf_set "require.progs" "rump_server rump.rtadvd rump.ndp rump.ifconfig"
|
||||
atf_set "require.progs" "${RUMP_PROGS}"
|
||||
}
|
||||
|
||||
ra_prefix_expiration_body()
|
||||
@ -782,37 +798,36 @@ ra_prefix_expiration_body()
|
||||
|
||||
create_rtadvdconfig_vltime "${IP6SRV_PREFIX}:" $expire_time
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
atf_check -s exit:0 -o match:'0.->.1' \
|
||||
RUMP_SERVER=${RUMPCLI} atf_check -s exit:0 -o match:'0 -> 1' \
|
||||
rump.sysctl -w net.inet6.ip6.accept_rtadv=1
|
||||
unset RUMP_SERVER
|
||||
|
||||
start_rtadvd $RUMPSRV $PIDFILE
|
||||
sleep $WAITTIME
|
||||
await_RA "${RUMPCLI}"
|
||||
|
||||
check_entries $RUMPCLI $RUMPSRV $IP6SRV_PREFIX
|
||||
|
||||
export RUMP_SERVER=${RUMPCLI}
|
||||
|
||||
# Terminate rtadvd to prevent new RA messages from coming
|
||||
# Note that ifconfig down; kill -TERM doesn't work
|
||||
kill_rtadvd $PIDFILE
|
||||
terminate_rtadvd $PIDFILE
|
||||
|
||||
# Wait until the default routers and prefix entries are expired
|
||||
# XXX need the same better way here too...
|
||||
sleep $expire_time
|
||||
|
||||
$DEBUG && dump_entries
|
||||
|
||||
# Give nd6_timer a chance to sweep default routers and prefix entries
|
||||
# XXX and here
|
||||
sleep 2
|
||||
|
||||
$DEBUG && dump_entries
|
||||
atf_check -s exit:0 -o match:'if=shmif0' rump.ndp -r
|
||||
atf_check -s exit:0 -o match:if=shmif0 rump.ndp -r
|
||||
atf_check -s exit:0 -o empty rump.ndp -p
|
||||
atf_check -s exit:0 -o match:'linkmtu=1300' rump.ndp -n -i shmif0
|
||||
atf_check -s exit:0 -o match:"$ONEDAYISH S R" rump.ndp -n -a
|
||||
atf_check -s exit:0 -o not-match:'fc00:1:' rump.ndp -n -a
|
||||
atf_check -s exit:0 -o not-match:'fc00:1:' rump.ifconfig shmif0 inet6
|
||||
atf_check -s exit:0 -o match:linkmtu=1300 rump.ndp -n -i shmif0
|
||||
atf_check -s exit:0 -o match:"$ONEDAYISH S R" -o not-match:fc00:1: \
|
||||
rump.ndp -n -a
|
||||
atf_check -s exit:0 -o not-match:fc00:1: rump.ifconfig shmif0 inet6
|
||||
unset RUMP_SERVER
|
||||
|
||||
rump_server_destroy_ifaces
|
||||
|
||||
Loading…
Reference in New Issue
Block a user