From 98945a6d0ff2a887215e46794c76d1cf53841c5c Mon Sep 17 00:00:00 2001 From: lukem Date: Thu, 28 Mar 2002 02:15:04 +0000 Subject: [PATCH] Convert to New Distrib World Order, removing pre-sysinst goop whilst here. Per discussion with Matt Thomas, who said he'd test this if I did the conversion. --- distrib/vax/ramdisk/Makefile | 88 ++--- distrib/vax/ramdisk/Makefile.inc | 57 ---- distrib/vax/ramdisk/dot.commonutils | 135 -------- distrib/vax/ramdisk/dot.hdprofile | 62 ---- distrib/vax/ramdisk/dot.instutils | 212 ------------ distrib/vax/ramdisk/install.tmpl | 513 ---------------------------- distrib/vax/ramdisk/list | 146 ++++---- distrib/vax/ramdisk/mtree.conf | 82 ----- distrib/vax/ramdisk/ramdiskbin.conf | 38 --- distrib/vax/ramdisk/start.tmpl | 49 --- distrib/vax/ramdisk/upgrade.tmpl | 257 -------------- 11 files changed, 90 insertions(+), 1549 deletions(-) delete mode 100644 distrib/vax/ramdisk/Makefile.inc delete mode 100644 distrib/vax/ramdisk/dot.commonutils delete mode 100644 distrib/vax/ramdisk/dot.hdprofile delete mode 100644 distrib/vax/ramdisk/dot.instutils delete mode 100644 distrib/vax/ramdisk/install.tmpl delete mode 100644 distrib/vax/ramdisk/mtree.conf delete mode 100644 distrib/vax/ramdisk/ramdiskbin.conf delete mode 100644 distrib/vax/ramdisk/start.tmpl delete mode 100644 distrib/vax/ramdisk/upgrade.tmpl diff --git a/distrib/vax/ramdisk/Makefile b/distrib/vax/ramdisk/Makefile index 57c729412177..a9b9153dfbd3 100644 --- a/distrib/vax/ramdisk/Makefile +++ b/distrib/vax/ramdisk/Makefile @@ -1,74 +1,40 @@ -# $NetBSD: Makefile,v 1.10 2002/03/06 12:29:57 lukem Exp $ +# $NetBSD: Makefile,v 1.11 2002/03/28 02:15:04 lukem Exp $ -TOP= ${.CURDIR}/.. +.include "${.CURDIR}/../../Makefile.inc" +.include -.include "${TOP}/Makefile.inc" IMAGE= ramdisk.fs +IMAGESIZE= 1138k -AUXTARGETS= install.sh upgrade.sh start.sh -AUXCLEAN= ${AUXTARGETS} +WARNS= 1 -CBIN= ramdiskbin +CRUNCHBIN= ramdiskbin +LISTS= ${.CURDIR}/list ${DISTRIBDIR}/common/list.sysinst +MTREECONF= ${DISTRIBDIR}/common/mtree.common +IMAGEENDIAN= le +MAKEDEVTARGETS= std mt0 st0 rd0 rd1 dz0 dl0 dhu0 rx0 ra0 ra1 hp0 hp1 \ + sd0 sd1 sd2 md0 pty0 cd0 cd1 +IMAGEDEPENDS= ${CRUNCHBIN} \ + disktab.preinstall dot.profile termcap.vt100 \ + ${DESTDIR}/boot ${DESTDIR}/usr/mdec/xxboot \ + ${_SRC_TOP_}/etc/group ${_SRC_TOP_}/etc/master.passwd \ + ${_SRC_TOP_}/etc/netconfig ${_SRC_TOP_}/etc/protocols \ + ${_SRC_TOP_}/etc/services -MOUNT_POINT?= /mnt -# DEV/RDEV file system device, CDEV/RDEV vnconfig device -VND?= vnd0 -VND_DEV= /dev/${VND}c -VND_RDEV= /dev/r${VND}c -VND_CDEV= /dev/${VND}c -VND_CRDEV= /dev/r${VND}c -IMAGE?= xxx.fs -MDEC= ${DESTDIR}/usr/mdec +# Use stubs to eliminate some large stuff from libc +HACKSRC=${DISTRIBDIR}/utils/libhack +.include "${HACKSRC}/Makefile.inc" -LISTS= list -CRUNCHCONF= ${CBIN}.conf -MTREECONF= mtree.conf +${CRUNCHBIN}: libhack.o -CRUNCHGEN?= crunchgen -MTREE?= mtree -DISKTYPE= ramdisk -DISKSIZE= 2276 +realall: ${IMAGE} -install.sh: install.tmpl - sed "s/@@VERSION@@/${DISTRIBVER}/" < ${.ALLSRC} > ${.TARGET} +release: -upgrade.sh: upgrade.tmpl - sed "s/@@VERSION@@/${DISTRIBVER}/" < ${.ALLSRC} > ${.TARGET} -start.sh: start.tmpl - sed "s/@@VERSION@@/${DISTRIBVER}/" < ${.ALLSRC} > ${.TARGET} - -all: ${AUXTARGETS} ${CBIN} - dd if=/dev/zero of=${IMAGE} count=${DISKSIZE} - vnconfig -t ${DISKTYPE} -v -c ${VND_CDEV} ${IMAGE} - disklabel -rw ${VND_CDEV} ${DISKTYPE} - newfs -B le -m 0 -o space -i 3228 -c 2 ${VND_RDEV} ${DISKTYPE} - mount ${VND_DEV} ${MOUNT_POINT} - ${MTREE} -def ${.CURDIR}/${MTREECONF} -p ${MOUNT_POINT}/ -u - TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \ - KERNOBJDIR=${KERNOBJDIR} \ - TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${.CURDIR}/${LISTS} - @echo "" - @df -i ${MOUNT_POINT} - @echo "" - umount ${MOUNT_POINT} - vnconfig -u ${VND_CDEV} - -unconfig: - -umount -f ${MOUNT_POINT} - -vnconfig -u ${VND_DEV} - -/bin/rm -f ${IMAGE} - -${CBIN}.mk ${CBIN}.cache ${CBIN}.c: ${CRUNCHCONF} - ${CRUNCHGEN} -D ${TOP}/../.. -L ${DESTDIR}/usr/lib ${.ALLSRC} - -${CBIN}: ${CBIN}.mk ${CBIN}.cache ${CBIN}.c - ${MAKE} -f ${CBIN}.mk all - -clean cleandir distclean: - /bin/rm -f ${AUXCLEAN} *.core ${IMAGE} ${CBIN} ${CBIN}.mk ${CBIN}.cache *.o *.cro *.c - -.include -.include +.include "${DISTRIBDIR}/common/Makefile.crunch" +.include "${DISTRIBDIR}/common/Makefile.makedev" +.include "${DISTRIBDIR}/common/Makefile.image" +.include diff --git a/distrib/vax/ramdisk/Makefile.inc b/distrib/vax/ramdisk/Makefile.inc deleted file mode 100644 index 23cc2b555d05..000000000000 --- a/distrib/vax/ramdisk/Makefile.inc +++ /dev/null @@ -1,57 +0,0 @@ -# $NetBSD: Makefile.inc,v 1.7 2001/10/13 06:15:21 jmc Exp $ - -# TOP is assumed to be defined by Makefile including this one. - -CBIN= ramdiskbin -COMMONDIR= ${TOP}/ramdisk-common - -MOUNT_POINT?= /mnt -VND?= vnd0 -VND_DEV= /dev/${VND}a -VND_RDEV= /dev/r${VND}a -VND_CDEV= /dev/${VND}d -VND_CRDEV= /dev/r${VND}d -IMAGE?= xxx.fs -MDEC= ${DESTDIR}/usr/mdec - -LISTS= ${COMMONDIR}/list ${.CURDIR}/list -CRUNCHCONF= ${COMMONDIR}/${CBIN}.conf -MTREECONF= ${COMMONDIR}/mtree.conf - -CRUNCHGEN?= crunchgen -MTREE?= mtree - -DISKTYPE= floppy3 - -all: ${AUXTARGETS} ${CBIN} - dd if=/dev/zero of=${IMAGE} count=2880 - vnconfig -t ${DISKTYPE} -v -c ${VND_CDEV} ${IMAGE} - disklabel -rw ${VND_CDEV} ${DISKTYPE} - newfs -m 0 -o space -i 5120 -c 80 ${VND_RDEV} ${DISKTYPE} - mount ${VND_DEV} ${MOUNT_POINT} - ${MTREE} -def ${MTREECONF} -p ${MOUNT_POINT}/ -u - TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \ - KERNOBJDIR=${KERNOBJDIR} \ - TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${LISTS} - @echo "" - @df -i ${MOUNT_POINT} - @echo "" - umount ${MOUNT_POINT} - vnconfig -u ${VND_CDEV} - -unconfig: - -umount -f ${MOUNT_POINT} - -vnconfig -u ${VND_DEV} - -/bin/rm -f ${IMAGE} - -${CBIN}.mk ${CBIN}.cache ${CBIN}.c: ${CRUNCHCONF} - ${CRUNCHGEN} -D ${TOP}/../../.. -L ${DESTDIR}/usr/lib ${CRUNCHCONF} - -${CBIN}: ${CBIN}.mk ${CBIN}.cache ${CBIN}.c - ${MAKE} -f ${CBIN}.mk all - -clean cleandir distclean: - /bin/rm -f ${AUXCLEAN} *.core ${IMAGE} ${CBIN} ${CBIN}.mk ${CBIN}.cache *.o *.cro *.c - -.include -.include diff --git a/distrib/vax/ramdisk/dot.commonutils b/distrib/vax/ramdisk/dot.commonutils deleted file mode 100644 index 77c17c709dbe..000000000000 --- a/distrib/vax/ramdisk/dot.commonutils +++ /dev/null @@ -1,135 +0,0 @@ -# $NetBSD: dot.commonutils,v 1.3 2000/06/14 17:24:49 cgd Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed for the -# NetBSD Project. See http://www.netbsd.org/ for -# information about NetBSD. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# -# <> - -# Installation utilites (functions), to get NetBSD installed on -# the hard disk. These are meant to be invoked from the shell prompt, -# by people installing NetBSD. - -# we know that /etc/fstab is only generated on the hard drive -dest_dir=/ -if [ ! -f /etc/fstab ]; then - dest_dir=/mnt/ -fi - -# counter for possible shared library confusion -TAR=/usr/bin/tar -GUNZIP=/usr/bin/gunzip - -Set_tmp_dir() -{ - def_tmp_dir=`pwd` - if [ "$def_tmp_dir" = "/" -o "$def_tmp_dir" = "/mnt" ]; then - def_tmp_dir="$dest_dir"usr/distrib - fi - - echo -n "What directory should be used to find and/or store " - echo "installtion" - echo -n "files? [$def_tmp_dir] " - read tmp_dir - if [ "$tmp_dir" = "" ]; then - tmp_dir=$def_tmp_dir - fi - if [ ! -d "$tmp_dir" ]; then - /bin/rm -rf $tmp_dir - mkdir -p $tmp_dir - fi -} - -Tmp_dir() -{ - if [ "$tmp_dir" = "" ]; then - Set_tmp_dir - fi - cd $tmp_dir -} - -Load_fd() -{ - Tmp_dir - which= -# echo "Don't forget that you can't load from the drive you booted from." - echo "" - - while [ "$which" != "0" -a "$which" != "1" ]; do - echo -n "Read from which floppy drive ('0' or '1')? [0] " - read which - if [ "X$which" = "X" ]; then - which=0 - fi - done - echo "" - echo "WARNING: during the floppy loading process, you should only" - echo "use Control-C at the prompt." - echo "" - while echo -n \ - "Insert floppy (hit Control-C to terminate, enter to load): " - do - read foo - mount -r -t msdos /dev/fd${which}a /mnt2 - cp -rp /mnt2/* . - umount /mnt2 - done -} - -Load_tape() -{ - Tmp_dir - echo -n "Which tape drive will you be using? [rst0] " - read which - if [ "X$which" = "X" ]; then - which=rst0 - fi - echo -n "Insert the tape into the tape drive and hit return to " - echo -n "continue..." - read foo - echo "Extracting files from the tape..." - $TAR --unlink -xvpf /dev/$which - echo "Done." -} - -Extract() -{ - Tmp_dir - echo -n "Would you like to list the files as they're extracted? [n] " - read verbose - case $verbose in - y*|Y*) - tarverbose=v - ;; - *) - tarverbose= - ;; - esac - cat "$1"* | $GUNZIP | (cd $dest_dir ; $TAR --unlink -xp"$tarverbose"f - ) -} diff --git a/distrib/vax/ramdisk/dot.hdprofile b/distrib/vax/ramdisk/dot.hdprofile deleted file mode 100644 index e606c7e51c1d..000000000000 --- a/distrib/vax/ramdisk/dot.hdprofile +++ /dev/null @@ -1,62 +0,0 @@ -# $NetBSD: dot.hdprofile,v 1.4 2000/06/14 17:24:50 cgd Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed for the -# NetBSD Project. See http://www.netbsd.org/ for -# information about NetBSD. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# -# <> - -PATH=/sbin:/bin:/usr/bin:/usr/sbin:/ -export PATH -TERM=vt100 -export TERM -HOME=/ -export HOME - -umask 022 - -if [ "X${DONEPROFILE}" = "X" ]; then - DONEPROFILE=YES - export DONEPROFILE - - echo "Checking filesystems..." - fsck -y - - echo "Mounting root..." - mount -u / - - # set up some sane defaults - echo 'erase ^?, werase ^W, kill ^U, intr ^C' - stty newcrt werase ^W intr ^C kill ^U erase ^? 9600 - echo '' - - TERMCAP=/.termcap ; export TERMCAP - - [ -x /sysinst ] && /sysinst -fi diff --git a/distrib/vax/ramdisk/dot.instutils b/distrib/vax/ramdisk/dot.instutils deleted file mode 100644 index f5315a902c46..000000000000 --- a/distrib/vax/ramdisk/dot.instutils +++ /dev/null @@ -1,212 +0,0 @@ -# $NetBSD: dot.instutils,v 1.3 2000/06/14 17:24:50 cgd Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed for the -# NetBSD Project. See http://www.netbsd.org/ for -# information about NetBSD. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# -# <> - -# Installation configuration utilities (functions), to get NetBSD configured -# reasonably once it is installed on the hard disk. These are meant to be -# invoked from the shell prompt, by people installing NetBSD. - -config_int() -{ - local intf resp ifname ifaddr ifflags - intf=$1 - case "$intf" in - ""|lo*|ppp*|sl*|tun*) - return 0; - ;; - *) - ;; - esac - - echo -n "Configure" $intf "? [y]" - read resp - case "$resp" in - n*|N*) - return 0; - ;; - *) - ;; - esac - - echo -n "What is the hostname for this interface? [$hname] " - read ifname - if [ "$ifname" = "" ]; then - ifname=$hname - fi - ifaddr= - while [ "$ifaddr" = "" ]; do - echo -n "What is the IP address associated with " - echo -n "interface ${intf}? " - read ifaddr - done - echo "$ifaddr $ifname `echo $ifname | sed -e s/\.$dname//`" \ - >> ${ETC}/hosts - - echo -n "Does this interface have a special netmask? [n] " - read resp - case "$resp" in - y*) - echo -n "What is the netmask? [0xffffff00] " - read ifnetmask - if [ "$ifnetmask" = "" ]; then - ifnetmask=0xffffff00 - fi - ifnetmask_arg="netmask $ifnetmask" - ;; - *) - ifnetmask= - ifnetmask_arg= - ;; - esac - - echo -n "Does this interface need a special media type? [n] " - read resp - case "$resp" in - y*) - echo -n "What media type? [10baseT/UTP] " - read ifflags - if [ "$ifflags" = "" ]; then - ifflags="10baseT/UTP" - fi - ifflags_arg="media $ifflags" - ;; - *) - ifflags= - ifflags_arg= - ;; - esac - echo "inet $ifname $ifnetmask_arg $ifflags_arg" > ${ETC}/ifconfig.$intf -} - - -Configure() -{ - DEV=/dev - ETC=/etc - ROOT=/ - if [ ! -f /etc/fstab ]; then - DEV=/mnt/dev - ETC=/mnt/etc - ROOT=/mnt - fi - - echo "You will now be prompted for information about this" - echo "machine. If you hit return, the default answer (in" - echo "brackets) will be used." - - echo "" - echo -n "What is this machine's hostname? [unknown.host.domain] " - read hname - if [ "$hname" = "" ]; then - hname=unknown.host.domain - fi - echo $hname > ${ETC}/myname - proto_domain=`echo $hname | sed -e 's/[^.]*\.//'` - - echo "" - echo "What domain is this machine in (this is NOT its YP" - echo -n "domain name)? [$proto_domain] " - read dname - if [ "$dname" = "" ]; then - dname=$proto_domain - fi - - echo "" - if [ -e $ETC/sendmail.cf ]; then - echo "WARNING: A default sendmail.cf exists, and probably" - echo "needs to be tuned and/or replaced, to work properly at" - echo "your site!" - else - echo "WARNING: No default sendmail.cf installed. Did you" - echo "forget to install the 'etc' distribution?" - fi - - echo "127.0.0.1 localhost localhost.$dname" > ${ETC}/hosts - - echo "" - echo -n "Configure network interfaces? [y] " - read resp - case "$resp" in - n*) - ;; - *) - for if in `ifconfig -l` - do - config_int $if - done - ;; - esac - - - echo "" - echo -n "Making device nodes (may take a while)..." - cd ${DEV} - sh MAKEDEV all - echo " done." - - sync - - if [ ! -f ${ROOT}/netbsd ] - then - echo "You have not unpacked the kernel installation" - echo "set. You must do so before you reboot." - fi -} - -# Upgrade cleanup utilities (functions), to make sure a recently-upgraded -# system is safely runnable. These are meant to be invoked from the shell -# prompt, by people installing NetBSD. - -Cleanup() -{ - upgrade_dir=/ - - if [ ! -f /etc/fstab ]; then - upgrade_dir=/mnt - fi - - echo "Cleaning up miscellaneous files in /etc..." - mv $upgrade_dir/etc/rc.bak $upgrade_dir/etc/rc - chroot $upgrade_dir /usr/sbin/pwd_mkdb -p /etc/master.passwd - chroot $upgrade_dir /bin/rm /etc/sendmail.fc > /dev/null 2>&1 - sync - echo "Done." - - echo "" - echo "All that's left to do now is to install a new NetBSD kernel" - echo "on your hard disk. You should now halt your machine using" - echo "the 'halt' command. Once the machine is halted, replace the" - echo "installation floppy with the kernel-copy floppy and hit any" - echo "key to reboot. Use the kernel-copy floppy to copy a kernel" - echo "to your hard disk." -} diff --git a/distrib/vax/ramdisk/install.tmpl b/distrib/vax/ramdisk/install.tmpl deleted file mode 100644 index 4e8b04af92ee..000000000000 --- a/distrib/vax/ramdisk/install.tmpl +++ /dev/null @@ -1,513 +0,0 @@ -#!/bin/sh -# $NetBSD: install.tmpl,v 1.3 2000/06/14 22:52:48 cgd Exp $ -# -# Copyright (c) 1997 Perry E. Metzger -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed for the -# NetBSD Project. See http://www.netbsd.org/ for -# information about NetBSD. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# -# <> - -# NetBSD installation script. -# In a perfect world, this would be a nice C program, with a reasonable -# user interface. - -DT=/etc/disktab # /etc/disktab -FSTABDIR=/mnt/etc # /mnt/etc -#DONTDOIT=echo -ASYNC="-o async" - -FSTAB=${FSTABDIR}/fstab - -getresp() { - read resp - if [ "X$resp" = "X" ]; then - resp=$1 - fi -} - -echo "Welcome to the NetBSD @@VERSION@@ installation program." -echo "" -echo "This program is designed to help you put NetBSD on your hard disk," -echo "in a simple and rational way. You'll be asked several questions," -echo "and it would probably be useful to have your disk's hardware" -echo "manual, the installation notes, and a calculator handy." -echo "" -echo "In particular, you will need to know some reasonably detailed" -echo "information about your disk's geometry, because there is currently" -echo "no way this this program can figure that information out." -echo "" -echo "As with anything which modifies your hard drive's contents, this" -echo "program can cause SIGNIFICANT data loss, and you are advised" -echo "to make sure your hard drive is backed up before beginning the" -echo "installation process." -echo "" -echo "Default answers are displyed in brackets after the questions." -echo "You can hit Control-C at any time to quit, but if you do so at a" -echo "prompt, you may have to hit return. Also, quitting in the middle of" -echo "installation may leave your system in an inconsistent state." -echo "" -echo -n "Proceed with installation? [n] " -getresp "n" -case "$resp" in - y*|Y*) - echo "Cool! Let's get to it..." - ;; - *) - echo "" - echo "OK, then. Enter 'halt' at the prompt to halt the" - echo "machine. Once the machine has halted, remove the" - echo "floppy and press any key to reboot." - exit - ;; -esac - -echo "" -echo "To do the installation, you'll need to provide some information about" -echo "your disk." -echo "" -echo "NetBSD can be installed on ST506, ESDI, IDE, or SCSI disks." -echo -n "What kind of disk will you be installing on? [SCSI] " -getresp "SCSI" -case "$resp" in - esdi|ESDI|st506|ST506) - drivetype=wd - echo -n "Does it support _automatic_ sector remapping? [y] " - getresp "y" - case "$resp" in - n*|N*) - sect_fwd="sf:" - ;; - *) - sect_fwd="" - ;; - esac - ;; - ide|IDE) - drivetype=wd - sect_fwd="" - type=ST506 - ;; - scsi|SCSI) - drivetype=sd - sect_fwd="" - type=SCSI - ;; -esac - -# find out what units are possible for that disk, and query the user. -driveunits=`ls /dev/${drivetype}?a | sed -e 's,/dev/\(...\)a,\1,g'` -if [ "X${driveunits}" = "X" ]; then - echo "FATAL ERROR:" - echo "No devices for disks of type '${drivetype}'." - echo "This is probably a bug in the install disks." - echo "Exiting install program." - exit -fi -prefdrive=${drivetype}0 - -echo "" -echo "The following ${drivetype}-type disks are supported by this" -echo "installation procedure:" -echo " "${driveunits} -echo "Note that they may not exist in _your_ machine; the list of" -echo "disks in your machine was printed when the system was booting." -echo "" -while [ "X${drivename}" = "X" ]; do - echo -n "Which disk would like to install on? [${prefdrive}] " - getresp ${prefdrive} - otherdrives=`echo "${driveunits}" | sed -e s,${resp},,` - if [ "X${driveunits}" = "X${otherdrives}" ]; then - echo "" - echo "\"${resp}\" is an invalid drive name. Valid choices" - echo "are: "${driveunits} - echo "" - else - drivename=${resp} - fi -done - -echo "" -echo "Using disk ${drivename}." -echo "" -echo -n "What kind of disk is it? (one word please) [my${drivetype}] " -getresp "my${drivetype}" -labelname=$resp - -echo "" -echo "You will now need to provide some information about your disk's" -echo "geometry. This should either be in the User's Manual for your disk," -echo "or you should have written down what NetBSD printed when booting." -echo "(Note that he geometry that's printed at boot time is preferred.)" -echo "" -echo "You may choose to view the initial boot messages for your system" -echo "again right now if you like." -echo -n "View the boot messages again? [n] " -getresp "n" -case "$resp" in - y*|Y*) - more /kern/msgbuf - ;; - *) - echo "" - ;; -esac - -echo "" -echo "You will now enter the disk geometry information" -echo "" - -echo -n "Number of bytes per disk sector? [512] " -getresp 512 -bytes_per_sect="$resp" - -echo -n "Number of disk cylinders? " -getresp -cyls_per_disk="$resp" - -echo -n "Number of disk tracks (heads) per disk cylinder? " -getresp -tracks_per_cyl="$resp" - -echo -n "Number of disk sectors per disk track? " -getresp -sects_per_track="$resp" - -cylindersize=$(( $sects_per_track * $tracks_per_cyl )) -cylbytes=$(( $cylindersize * $bytes_per_sect )) -disksize=$(( $cylindersize * $cyls_per_disk )) - -echo "" -echo "Your disk has a total of $disksize $bytes_per_sect byte sectors," -echo "arranged as $cyls_per_disk cylinders which contain $cylindersize " -echo "sectors ($cylbytes bytes) each." -echo "" -echo "You can specify partition sizes in cylinders ('c') or sectors ('s')." -while [ "X${sizemult}" = "X" ]; do - echo -n "What units would you like to use? [cylinders] " - getresp cylinders - case "$resp" in - c*|C*) - sizemult=$cylindersize - sizeunit="cylinders" - ;; - s*|S*) - sizemult=1 - sizeunit="sectors" - ;; - *) - echo "" - echo "Enter cylinders ('c') or sectors ('s')." - ;; - esac -done - -if [ $sizeunit = "sectors" ]; then - echo "" - echo "For best disk performance, partitions should begin and end on" - echo "cylinder boundaries. Wherever possible, pick sizes that are" - echo "multiples of the cylinder size ($cylindersize sectors)." -fi - -echo -n "" -echo -n "Size of NetBSD portion of disk (in $sizeunit)? " -getresp -partition=$resp -partition_sects=$(( $resp * $sizemult )) -part_offset=0 -if [ $partition_sects -lt $disksize ]; then - echo -n "Offset of NetBSD portion of disk (in $sizeunit)? " - getresp - part_offset=$resp -fi -badspacesec=0 -if [ "$sect_fwd" = "sf:" ]; then - badspacecyl=$(( $sects_per_track + 126 )) - badspacecyl=$(( $badspacecyl + $cylindersize - 1 )) - badspacecyl=$(( $badspacecyl / $cylindersize )) - badspacesec=$(( $badspacecyl * $cylindersize )) - echo "" - echo -n "Using $badspacesec sectors ($badspacecyl cylinders) for the " - echo "bad144 bad block table" -fi - -sects_left=$(( $partition_sects - $badspacesec )) -units_left=$(( $sects_left / $sizemult )) -echo "" -echo "There are $units_left $sizeunit left to allocate." -echo "" -root=0 -while [ $root -eq 0 ]; do - echo -n "Root partition size (in $sizeunit)? " - getresp - case $resp in - [1-9]*) - total=$resp - if [ $total -gt $units_left ]; then - echo -n "Root size is greater than remaining " - echo "free space on disk." - else - root=$resp - fi - ;; - esac -done -root_offset=$part_offset -part_used=$(( $root + $badspacesec / $sizemult )) -units_left=$(( $partition - $part_used )) -echo "" - -swap=0 -while [ $swap -eq 0 ]; do - echo "$units_left $sizeunit remaining in NetBSD portion of disk." - echo -n "Swap partition size (in $sizeunit)? " - getresp - case $resp in - [1-9]*) - if [ $swap -gt $units_left ]; then - echo -n "Swap size is greater than remaining " - echo "free space on disk." - else - swap=$resp - fi - ;; - esac -done -swap_offset=$(( $root_offset + $root )) -part_used=$(( $part_used + $swap )) -echo "" - -fragsize=1024 -blocksize=8192 - -cat /etc/disktab.preinstall > $DT -echo "" >> $DT -echo "$labelname|NetBSD installation generated:\\" >> $DT -echo " :dt=${type}:ty=winchester:\\" >> $DT -echo -n " :nc#${cyls_per_disk}:ns#${sects_per_track}" >> $DT -echo ":nt#${tracks_per_cyl}:\\" >> $DT -echo " :se#${bytes_per_sect}:${sect_fwd}\\" >> $DT -_size=$(( $root * $sizemult )) -_offset=$(( $root_offset * $sizemult )) -echo -n " :pa#${_size}:oa#${_offset}" >> $DT -echo ":ta=4.2BSD:ba#${blocksize}:fa#${fragsize}:\\" >> $DT -_size=$(( $swap * $sizemult )) -_offset=$(( $swap_offset * $sizemult )) -echo " :pb#${_size}:ob#${_offset}:tb=swap:\\" >> $DT -_size=$(( $partition * $sizemult )) -_offset=$(( $part_offset * $sizemult )) -echo " :pc#${_size}:oc#${_offset}:\\" >> $DT - -echo "You will now have to enter information about any other partitions" -echo "to be created in the NetBSD portion of the disk. This process will" -echo "be complete when you've filled up all remaining space in the NetBSD" -echo "portion of the disk." - -while [ $part_used -lt $partition ]; do - part_size=0 - units_left=$(( $partition - $part_used )) - while [ $part_size -eq 0 ]; do - echo "" - echo -n "$units_left $sizeunit remaining in NetBSD portion of " - echo "the disk" - echo -n "Next partition size (in $sizeunit)? " - getresp - case $resp in - [1-9]*) - total=$(( $part_used + $resp )) - if [ $total -gt $partition ]; then - echo -n "That would make the parition" - echo "too large to fit!" - else - part_size=$resp - part_used=$total - part_name="" - while [ "$part_name" = "" ]; do - echo -n "Mount point? " - getresp - part_name=$resp - done - fi - ;; - esac - done - if [ "$ename" = "" ]; then - ename=$part_name - offset=$(( $part_offset + $root + $swap )) - _size=$(( $part_size * $sizemult )) - _offset=$(( $offset * $sizemult )) - echo -n " :pe#${_size}:oe#${_offset}" >> $DT - echo ":te=4.2BSD:be#${blocksize}:fe#${fragsize}:\\" >> $DT - offset=$(( $offset + $part_size )) - elif [ "$fname" = "" ]; then - fname=$part_name - _size=$(( $part_size * $sizemult )) - _offset=$(( $offset * $sizemult )) - echo -n " :pf#${_size}:of#${_offset}" >> $DT - echo ":tf=4.2BSD:bf#${blocksize}:ff#${fragsize}:\\" >> $DT - offset=$(( $offset + $part_size )) - elif [ "$gname" = "" ]; then - gname=$part_name - _size=$(( $part_size * $sizemult )) - _offset=$(( $offset * $sizemult )) - echo -n " :pg#${_size}:og#${_offset}" >> $DT - echo ":tg=4.2BSD:bg#${blocksize}:fg#${fragsize}:\\" >> $DT - offset=$(( $offset + $part_size )) - elif [ "$hname" = "" ]; then - hname=$part_name - _size=$(( $part_size * $sizemult )) - _offset=$(( $offset * $sizemult )) - echo -n " :ph#${_size}:oh#${_offset}" >> $DT - echo ":th=4.2BSD:bh#${blocksize}:fh#${fragsize}:\\" >> $DT - part_used=$partition - fi -done -echo " :pd#${disksize}:od#0:" >> $DT -sync - -echo "" -echo "THIS IS YOUR LAST CHANCE!!!" -echo "" -echo -n "Are you SURE you want NetBSD installed on your hard drive? (yes/no) " -answer="" -while [ "$answer" = "" ]; do - getresp - case $resp in - yes|YES) - echo "" - echo "Here we go..." - answer=yes - ;; - no|NO) - echo "" - echo -n "OK, then. enter 'halt' to halt the machine. " - echo "Once the machine has halted," - echo -n "remove the floppy, and press any key to " - echo "reboot." - exit - ;; - *) - echo -n "I want a yes or no answer... well? " - ;; - esac -done - -echo "" -echo -n "Labeling disk $drivename..." -$DONTDOIT disklabel -w -r $drivename $labelname -echo " done." - -if [ "$sect_fwd" = "sf:" ]; then - echo -n "Initializing bad144 badblock table..." - $DONTDOIT bad144 $drivename 0 - echo " done." -fi - -echo "Initializing root filesystem, and mounting..." -$DONTDOIT newfs /dev/r${drivename}a $name -$DONTDOIT mount -v $ASYNC /dev/${drivename}a /mnt -if [ "$ename" != "" ]; then - echo "" - echo "Initializing $ename filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}e $name - $DONTDOIT mkdir -p /mnt/$ename - $DONTDOIT mount -v $ASYNC /dev/${drivename}e /mnt/$ename -fi -if [ "$fname" != "" ]; then - echo "" - echo "Initializing $fname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}f $name - $DONTDOIT mkdir -p /mnt/$fname - $DONTDOIT mount -v $ASYNC /dev/${drivename}f /mnt/$fname -fi -if [ "$gname" != "" ]; then - echo "" - echo "Initializing $gname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}g $name - $DONTDOIT mkdir -p /mnt/$gname - $DONTDOIT mount -v $ASYNC /dev/${drivename}g /mnt/$gname -fi -if [ "$hname" != "" ]; then - echo "" - echo "Initializing $hname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}h $name - $DONTDOIT mkdir -p /mnt/$hname - $DONTDOIT mount -v $ASYNC /dev/${drivename}h /mnt/$hname -fi - -echo "" -echo "Populating filesystems with bootstrapping binaries and config files" -$DONTDOIT tar --one-file-system -cf - . | (cd /mnt ; tar --unlink -xpf - ) -$DONTDOIT cp /tmp/.hdprofile /mnt/.profile - -echo "" -echo -n "Creating an fstab..." -echo /dev/${drivename}a / ffs rw 1 1 | sed -e s,//,/, > $FSTAB -echo /dev/${drivename}b none swap sw 0 0 | sed -e s,//,/, >> $FSTAB -if [ "$ename" != "" ]; then - echo /dev/${drivename}e /$ename ffs rw 1 2 | sed -e s,//,/, >> $FSTAB -fi -if [ "$fname" != "" ]; then - echo /dev/${drivename}f /$fname ffs rw 1 3 | sed -e s,//,/, >> $FSTAB -fi -if [ "$gname" != "" ]; then - echo /dev/${drivename}g /$gname ffs rw 1 4 | sed -e s,//,/, >> $FSTAB -fi -if [ "$hname" != "" ]; then - echo /dev/${drivename}h /$hname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB -fi -sync -echo " done." - -echo "" -echo -n "Installing boot blocks on $drivename..." -# shouldn't be needed, but... -$DONTDOIT rm -f /mnt/boot -$DONTDOIT /usr/mdec/installboot /usr/mdec/biosboot.sym /dev/r${drivename}a -echo " done." - - -echo "" -echo "" -echo "OK! The preliminary work of setting up your disk is now complete." -echo "" -echo "The remaining tasks are:" -echo "" -echo "To load and install the NetBSD distribution sets." -echo "Currently the hard drive's root filesystem is mounted on /mnt" -echo "" -echo "To copy a NetBSD kernel to the hard drive's root filesystem." -echo "Once accomplished, you can boot off the hard drive." -echo "" -echo "Consult the installation notes which will describe how to" -echo "install the distribution sets and kernel. Post-installation" -echo "configuration is also discussed therein." -echo "" -echo "GOOD LUCK!" -echo "" diff --git a/distrib/vax/ramdisk/list b/distrib/vax/ramdisk/list index 6f58622dd293..7979e1fdf410 100644 --- a/distrib/vax/ramdisk/list +++ b/distrib/vax/ramdisk/list @@ -1,73 +1,64 @@ -# $NetBSD: list,v 1.9 2000/06/10 04:56:12 matt Exp $ +# $NetBSD: list,v 1.10 2002/03/28 02:15:09 lukem Exp $ -# Do this first in case spwd.db and pwd.db fill disk -COPY ${CURDIR}/../../../etc/master.passwd etc/master.passwd -SPECIAL pwd_mkdb -p -d ./ etc/master.passwd -SPECIAL /bin/rm etc/spwd.db -SPECIAL /bin/rm etc/pwd.db +SRCDIRS bin sbin usr.bin/less usr.bin usr.sbin gnu/usr.bin -# copy the MAKEDEV script and make some devices -COPY ${CURDIR}/../../../etc/etc.vax/MAKEDEV dev/MAKEDEV -SPECIAL cd dev; sh MAKEDEV std mt0 st0 rd0 rd1 dz0 dl0 dhu0 rx0 -SPECIAL cd dev; sh MAKEDEV ra0 ra1 hp0 hp1 sd0 sd1 sd2 md0 pty0 cd0 cd1 -SPECIAL /bin/rm dev/MAKEDEV +PROG bin/cat +PROG bin/chmod +PROG bin/cp +PROG bin/dd +PROG bin/df +PROG bin/ed +PROG bin/ln +PROG bin/ls +PROG bin/mkdir +PROG bin/mt +PROG bin/mv +PROG bin/pax usr/bin/tar +PROG bin/pwd +PROG bin/rm +PROG bin/sh +PROG bin/stty +PROG bin/sync -# copy the crunched binary, link to it, and kill it -COPY ${OBJDIR}/ramdiskbin ramdiskbin -LINK ramdiskbin sysinst -LINK ramdiskbin bin/cat -LINK ramdiskbin bin/chmod -LINK ramdiskbin bin/cp -LINK ramdiskbin bin/dd -LINK ramdiskbin bin/df -LINK ramdiskbin bin/ed -LINK ramdiskbin bin/ln -LINK ramdiskbin bin/ls -LINK ramdiskbin bin/mkdir -LINK ramdiskbin bin/mt -LINK ramdiskbin bin/mv -LINK ramdiskbin bin/pax -LINK ramdiskbin bin/pwd -LINK ramdiskbin bin/rm -LINK ramdiskbin bin/sh -LINK ramdiskbin bin/stty -LINK ramdiskbin bin/sync -LINK ramdiskbin sbin/disklabel -LINK ramdiskbin sbin/fdisk -LINK ramdiskbin sbin/fsck -LINK ramdiskbin sbin/fsck_ffs -LINK ramdiskbin sbin/halt -LINK ramdiskbin sbin/ifconfig -LINK ramdiskbin sbin/init -LINK ramdiskbin sbin/mknod -LINK ramdiskbin sbin/mount -LINK ramdiskbin sbin/mount_cd9660 -LINK ramdiskbin sbin/mount_ffs -LINK ramdiskbin sbin/mount_msdos -LINK ramdiskbin sbin/mount_nfs -LINK ramdiskbin sbin/mount_kernfs -LINK ramdiskbin sbin/newfs -LINK ramdiskbin sbin/ping -LINK ramdiskbin sbin/reboot -#LINK ramdiskbin sbin/restore -LINK ramdiskbin sbin/route -#LINK ramdiskbin sbin/rrestore -LINK ramdiskbin sbin/shutdown -LINK ramdiskbin sbin/swapctl -LINK ramdiskbin sbin/umount -SYMLINK /bin/cat usr/bin/chgrp -SYMLINK /bin/cat usr/bin/ftp -SYMLINK /bin/cat usr/bin/gunzip -SYMLINK /bin/cat usr/bin/gzcat -SYMLINK /bin/cat usr/bin/gzip -SYMLINK /bin/cat usr/bin/more -SYMLINK /bin/cat usr/bin/sed -SYMLINK /bin/cat usr/bin/strings -SYMLINK /bin/cat usr/bin/tar -# SYMLINK /bin/cat usr/sbin/bad144 -SYMLINK /bin/cat usr/sbin/chown -SYMLINK /bin/cat usr/sbin/chroot -SPECIAL /bin/rm ramdiskbin +PROG sbin/disklabel +PROG sbin/fsck +PROG sbin/fsck_ffs +PROG sbin/ifconfig +PROG sbin/init +PROG sbin/mknod +PROG sbin/mount +PROG sbin/mount_cd9660 +PROG sbin/mount_ffs +PROG sbin/mount_kernfs +PROG sbin/mount_nfs +PROG sbin/newfs +PROG sbin/ping +PROG sbin/reboot sbin/halt +# PROG sbin/restore sbin/rrestore +PROG sbin/route +PROG sbin/shutdown +PROG sbin/swapctl +PROG sbin/umount + +PROG usr/bin/ftp +PROG usr/bin/gzip usr/bin/gzcat usr/bin/gunzip +PROG usr/bin/less usr/bin/more +PROG usr/bin/sed +# PROG usr/bin/strings + +# PROG usr/sbin/bad144 +PROG usr/sbin/chown usr/bin/chgrp +PROG usr/sbin/chroot + +SPECIAL ftp srcdir distrib/utils/x_ftp +SPECIAL ifconfig srcdir distrib/utils/x_ifconfig +SPECIAL ping srcdir distrib/utils/x_ping +SPECIAL route srcdir distrib/utils/x_route + +LIBS libhack.o -ledit -lutil -lcurses -ltermcap -lrmt -lbz2 -lcrypt -ll -lm + +# init invokes the shell as -sh +ARGVLN sh -sh # we need the boot in /, and boot blocks in /usr/mdec COPY ${DESTDIR}/boot boot @@ -78,13 +69,13 @@ LINK usr/mdec/xxboot usr/mdec/rdboot LINK usr/mdec/xxboot usr/mdec/sdboot # various files that we need in /etc for the install -COPY ${CURDIR}/../../../etc/group etc/group -COPY ${CURDIR}/../../../etc/netconfig etc/netconfig -COPY ${CURDIR}/../../../etc/protocols etc/protocols -COPY ${CURDIR}/../../../etc/services etc/services +COPY ${_SRC_TOP_}/etc/group etc/group +COPY ${_SRC_TOP_}/etc/master.passwd etc/master.passwd +COPY ${_SRC_TOP_}/etc/netconfig etc/netconfig +COPY ${_SRC_TOP_}/etc/protocols etc/protocols +COPY ${_SRC_TOP_}/etc/services etc/services # and the common installation tools -# COPY dot.commonutils .commonutils COPY ${CURDIR}/termcap.vt100 usr/share/misc/termcap # the disktab explanation file @@ -92,14 +83,3 @@ COPY ${CURDIR}/disktab.preinstall etc/disktab.preinstall # and the installation tools COPY ${CURDIR}/dot.profile .profile -# COPY ${CURDIR}/dot.instutils .instutils -# COPY ${OBJDIR}/install.sh install -# COPY ${OBJDIR}/upgrade.sh upgrade -# COPY ${OBJDIR}/start.sh start -# COPY ${CURDIR}/dot.hdprofile tmp/.hdprofile -# SPECIAL chmod 755 install -# SPECIAL chmod 755 upgrade -# SPECIAL chmod 755 start - -#the lists of obsolete files used by sysinst -SPECIAL sh ${CURDIR}/../../sets/makeobsolete -b -s ${CURDIR}/../../sets -t ./dist diff --git a/distrib/vax/ramdisk/mtree.conf b/distrib/vax/ramdisk/mtree.conf deleted file mode 100644 index 0e5e2d6fc804..000000000000 --- a/distrib/vax/ramdisk/mtree.conf +++ /dev/null @@ -1,82 +0,0 @@ -# $NetBSD: mtree.conf,v 1.2 1999/06/05 20:17:43 bouyer Exp $ - -/set type=dir uname=root gname=wheel mode=0755 -# . -. - -# ./bin -bin -# ./bin -.. - -# ./dev -dev -# ./dev -.. - -# ./dist -dist -# ./dist -.. - -# ./etc -etc -# ./etc -.. - -# ./mnt -mnt -# ./mnt -.. - -# ./mnt2 -mnt2 -# ./mnt2 -.. - -# ./kern -kern -# ./kern -.. - -# ./sbin -sbin -# ./sbin -.. - -# ./tmp -tmp mode=01777 -# ./tmp -.. - -# ./usr -usr - -# ./usr/bin -bin -# ./usr/bin -.. - -# ./usr/mdec -mdec -# ./usr/mdec -.. - -# ./usr/sbin -sbin -# ./usr/sbin -.. - -# ./usr/share -share - -# ./usr/share/misc -misc -# ./usr/share/misc -.. - -# ./usr/share -.. - -# ./usr -.. diff --git a/distrib/vax/ramdisk/ramdiskbin.conf b/distrib/vax/ramdisk/ramdiskbin.conf deleted file mode 100644 index 07ec73b7a9da..000000000000 --- a/distrib/vax/ramdisk/ramdiskbin.conf +++ /dev/null @@ -1,38 +0,0 @@ -# $NetBSD: ramdiskbin.conf,v 1.7 2000/06/10 04:56:12 matt Exp $ -# -# ramdiskbin.conf - unified binary for the install ramdisk -# - -srcdirs bin sbin usr.bin/less usr.bin usr.sbin gnu/usr.bin - -progs cat chmod chown chroot cp dd df disklabel ed -progs fsck fsck_ffs ftp gzip ifconfig init less -progs ln ls mkdir mknod mount mount_cd9660 mount_ffs -progs mount_nfs mount_kernfs mt mv newfs ping pwd reboot rm -progs route sed sh shutdown stty swapctl sync -progs umount -progs sysinst pax - -special sysinst srcdir distrib/utils/sysinst/arch/vax -special init srcdir distrib/utils/init_s -special ping srcdir distrib/utils/x_ping - -special dd srcdir distrib/utils/x_dd -special ftp srcdir distrib/utils/x_ftp -special ifconfig srcdir distrib/utils/x_ifconfig -special route srcdir distrib/utils/x_route -special sh srcdir distrib/utils/x_sh - -ln chown chgrp -ln gzip gzcat gunzip -ln less more -ln sh -sh # init invokes the shell this way -#ln test [ -ln mount_cd9660 cd9660 -ln mount_ffs ffs -ln mount_nfs nfs -ln mount_kernfs kernfs -ln reboot halt -ln pax tar - -libs -ledit -lutil -lcurses -ltermcap -lrmt -lbz2 -lcrypt -ll -lm diff --git a/distrib/vax/ramdisk/start.tmpl b/distrib/vax/ramdisk/start.tmpl deleted file mode 100644 index fe3ecda581c1..000000000000 --- a/distrib/vax/ramdisk/start.tmpl +++ /dev/null @@ -1,49 +0,0 @@ -#!/bin/sh - -# $NetBSD: start.tmpl,v 1.1 1999/03/12 18:36:53 ragge Exp $ - -again="true" - -echo "Welcome to the NetBSD @@VERSION@@ installation floppy." -echo - -while [ $again = "true" ]; do - - echo 'enter "sysinst" to run the new system install program,' - echo ' "install" to install NetBSD,' - echo ' "upgrade" to upgrade an existing NetBSD system,' - echo ' or "shell" for a shell prompt.' - echo - echo -n "your choice? " - read resp - - case "$resp" in - sysinst|install|upgrade|shell) - again="false" - ;; - "") - echo - ;; - *) - echo "Sorry, $resp isn't valid." - echo - ;; - esac -done - -case "$resp" in - sysinst) - sysinst - ;; - install) - install - ;; - upgrade) - upgrade - ;; - shell) - echo 'If you want to run install or upgrade later,' - echo 'simply type "install" or "upgrade" to the shell.' - echo 'good luck!' - ;; -esac diff --git a/distrib/vax/ramdisk/upgrade.tmpl b/distrib/vax/ramdisk/upgrade.tmpl deleted file mode 100644 index 5806c5f00dda..000000000000 --- a/distrib/vax/ramdisk/upgrade.tmpl +++ /dev/null @@ -1,257 +0,0 @@ -#!/bin/sh -# $NetBSD: upgrade.tmpl,v 1.3 2000/06/14 22:52:48 cgd Exp $ -# -# Copyright (c) 1997 Perry E. Metzger -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed for the -# NetBSD Project. See http://www.netbsd.org/ for -# information about NetBSD. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# -# <> - -# NetBSD upgrade script. -# In a perfect world, this would be a nice C program, with a reasonable -# user interface. - -DT=/etc/disktab # /etc/disktab -FSTABDIR=/mnt/etc # /mnt/etc -#DONTDOIT=echo -UARGS="-c 2" - -FSTAB=${FSTABDIR}/fstab - -getresp() { - read resp - if [ "X$resp" = "X" ]; then - resp=$1 - fi -} - -echo "Welcome to the NetBSD @@VERSION@@ upgrade program." -echo "" -echo "This program is designed to help you put the new version of NetBSD" -echo "on your hard disk, in a simple and rational way. To upgrade, you" -echo "must have plenty of free space on all partitions which will be" -echo "upgraded. If you have at least 1MB free on your root partition," -echo "and several free on your /usr patition, you should be fine." -echo "" -echo "As with anything which modifies your hard drive's contents, this" -echo "program can cause SIGNIFICANT data loss, and you are advised" -echo "to make sure your hard drive is backed up before beginning the" -echo "upgrade process." -echo "" -echo "Default answers are displyed in brackets after the questions." -echo "You can hit Control-C at any time to quit, but if you do so at a" -echo "prompt, you may have to hit return. Also, quitting in the middle of" -echo "the upgrade may leave your system in an inconsistent (and unusable)" -echo "state." -echo "" -echo -n "Proceed with upgrade? [n] " -getresp "n" -case "$resp" in - y*|Y*) - echo "Cool! Let's get to it..." - ;; - *) - echo "" - echo "OK, then. Enter 'halt' at the prompt to halt the" - echo "machine. Once the machine has halted, remove the" - echo "floppy and press any key to reboot." - exit - ;; -esac - -# find out what units are possible, and query the user. -driveunits=`ls /dev/[sw]d?a | sed -e 's,/dev/\(...\)a,\1,g'` -if [ "X${driveunits}" = "X" ]; then - echo "FATAL ERROR:" - echo "No disk devices." - echo "This is probably a bug in the install disks." - echo "Exiting install program." - exit -fi - -echo "" -echo "The following disks are supported by this upgrade procedure:" -echo " "${driveunits} -echo "If your system was previously completely contained within the" -echo "disks listed above (i.e. if your system didn't occupy any space" -echo "on disks NOT listed above), this upgrade disk can upgrade your" -echo "system. If it cannot, hit Control-C at the prompt." -echo "" -while [ "X${drivename}" = "X" ]; do - echo -n "Which disk contains your root partition? " - getresp - otherdrives=`echo "${driveunits}" | sed -e s,${resp},,` - if [ "X${driveunits}" = "X${otherdrives}" ]; then - echo "" - echo "\"${resp}\" is an invalid drive name. Valid choices" - echo "are: "${driveunits} - echo "" - else - drivename=${resp} - fi -done - -echo "" -echo "Root partition is on ${drivename}a." - -echo "" -echo "If (and only if!) you are upgrading from NetBSD 0.9 or below," -echo "you should upgrade to the new file system format. Do not answer" -echo "yes if you are upgrading from NetBSD 1.0 or above." -echo "Would you like to upgrade your file systems to the new file system" -echo -n "format? [y] " -getresp "y" -case "$resp" in - n*|N*) - echo "" - echo "If you are upgrading from NetBSD 0.9 or below," - echo "you should upgrade your file systems with 'fsck -c 2'" - echo "as soon as is feasible, because the new file system" - echo "code is better-tested and more performant." - upgrargs="" - upgradefs=NO - ;; - *) - upgrargs=$UARGS - upgradefs=YES - ;; -esac - -if [ $upgradefs = YES ]; then - echo "" - echo "your file systems will be upgraded while they are checked" -fi - -echo "checking the file system on ${drivename}a..." - -fsck -f -p $upgrargs /dev/r${drivename}a -if [ $? != 0 ]; then - echo "FATAL ERROR: FILE SYSTEM UPGRADE FAILED." - echo "You should probably reboot the machine, fsck your" - echo "disk(s), and try the upgrade procedure again." - exit 1 -fi - -echo "" -echo "Mounting root partition on /mnt..." -mount /dev/${drivename}a /mnt -if [ $? != 0 ]; then - echo "FATAL ERROR: MOUNT FAILED." - echo "You should verify that your system is set up as you" - echo "described, and re-attempt the upgrade procedure." - exit 1 -fi -echo "Done." - -echo "" -echo -n "Copying new fsck binary to your hard disk..." -if [ ! -d /mnt/sbin ]; then - mkdir /mnt/sbin -fi -cp /sbin/fsck /mnt/sbin/fsck -if [ $? != 0 ]; then - echo "FATAL ERROR: COPY FAILED." - echo "It in unclear why this error would occur. It looks" - echo "like you may end up having to upgrade by hand." - exit 1 -fi -echo " Done." - -echo "" -echo "Re-mounting root partition read-only..." -mount -u -o ro /dev/${drivename}a /mnt -if [ $? != 0 ]; then - echo "FATAL ERROR: RE-MOUNT FAILED." - echo "It in unclear why this error would occur. It looks" - echo "like you may end up having to upgrade by hand." - exit 1 -fi -echo "Done." - -echo "" -echo "checking the rest of your file systems..." -chroot /mnt fsck -f -p $upgrargs -if [ $? != 0 ]; then - echo "FATAL ERROR: FILE SYSTEM UPGRADE(S) FAILED." - echo "You should probably reboot the machine, fsck your" - echo "file system(s), and try the upgrade procedure" - echo "again." - exit 1 -fi - echo "Done." - -echo "" -echo "Re-mounting root partition read-write..." -mount -u -o rw /dev/${drivename}a /mnt -if [ $? != 0 ]; then - echo "FATAL ERROR: RE-MOUNT FAILED." - echo "It in unclear why this error would occur. It looks" - echo "like you may end up having to upgrade by hand." - exit 1 -fi -echo "Done." - -echo "" -echo "Updating boot blocks on ${drivename}..." -# shouldn't be needed, but... -$DONTDOIT rm -f /mnt/boot -$DONTDOIT /usr/mdec/installboot /usr/mdec/biosboot.sym /dev/r${drivename}a -if [ $? != 0 ]; then - echo "FATAL ERROR: UPDATE OF DISK LABEL FAILED." - echo "It in unclear why this error would occur. It looks" - echo "like you may end up having to upgrade by hand." - exit 1 -fi -echo "Done." - -echo "" -echo "Copying bootstrapping binaries and config files to the hard drive..." -$DONTDOIT cp /mnt/.profile /mnt/.profile.bak -$DONTDOIT tar --exclude etc --one-file-system -cf - . | (cd /mnt ; tar --unlink -xpf - ) -$DONTDOIT mv /mnt/etc/rc /mnt/etc/rc.bak -$DONTDOIT cp /tmp/.hdprofile /mnt/.profile - -echo "" -echo "Mounting remaining partitions..." -chroot /mnt mount -at ffs > /dev/null 2>&1 -echo "Done." - -echo "" -echo "" -echo "OK! The preliminary work of setting up your disk is now complete," -echo "and you can now upgrade the actual NetBSD software." -echo "" -echo "Right now, your hard disk is mounted on /mnt. You should consult" -echo "the installation notes to determine how to load and install the new" -echo "NetBSD distribution sets, and how to clean up after the upgrade" -echo "software, when you are done." -echo "" -echo "GOOD LUCK!" -echo ""