adjust some debug output verbosity and use aprint_*()
This commit is contained in:
macallan
parent
50873dad9c
commit
964f61e42e
|
|
@ -1,4 +1,4 @@
|
|||
/* $NetBSD: dbri.c,v 1.9 2007/03/08 21:15:20 macallan Exp $ */
|
||||
/* $NetBSD: dbri.c,v 1.10 2007/03/10 18:42:37 macallan Exp $ */
|
||||
|
||||
/*
|
||||
* Copyright (C) 1997 Rudolf Koenig (rfkoenig@immd4.informatik.uni-erlangen.de)
|
||||
|
|
@ -42,7 +42,7 @@
|
|||
*/
|
||||
|
||||
#include <sys/cdefs.h>
|
||||
__KERNEL_RCSID(0, "$NetBSD: dbri.c,v 1.9 2007/03/08 21:15:20 macallan Exp $");
|
||||
__KERNEL_RCSID(0, "$NetBSD: dbri.c,v 1.10 2007/03/10 18:42:37 macallan Exp $");
|
||||
|
||||
#include "audio.h"
|
||||
#if NAUDIO > 0
|
||||
|
|
@ -75,9 +75,9 @@ __KERNEL_RCSID(0, "$NetBSD: dbri.c,v 1.9 2007/03/08 21:15:20 macallan Exp $");
|
|||
#define DBRI_ROM_NAME_PREFIX "SUNW,DBRI"
|
||||
|
||||
#ifdef DBRI_DEBUG
|
||||
#define DPRINTF(x) printf x
|
||||
# define DPRINTF aprint_debug
|
||||
#else
|
||||
#define DPRINTF(x)
|
||||
# define DPRINTF while (0) printf
|
||||
#endif
|
||||
|
||||
static const char *dbri_supported[] = {
|
||||
|
|
@ -259,6 +259,8 @@ dbri_attach_sbus(struct device *parent, struct device *self, void *aux)
|
|||
sc->sc_powerstate = PWR_RESUME;
|
||||
|
||||
pwr = prom_getpropint(sa->sa_node,"pwr-on-auxio",0);
|
||||
printf(": rev %s\n", ver);
|
||||
|
||||
if(pwr) {
|
||||
/*
|
||||
* we can control DBRI power via auxio and we're initially
|
||||
|
|
@ -267,14 +269,12 @@ dbri_attach_sbus(struct device *parent, struct device *self, void *aux)
|
|||
|
||||
sc->sc_have_powerctl = 1;
|
||||
sc->sc_powerstate = 0;
|
||||
printf("\n");
|
||||
dbri_set_power(sc, 1);
|
||||
powerhook_establish(self->dv_xname, dbri_powerhook, sc);
|
||||
} else {
|
||||
/* we can't control power so we're always up */
|
||||
sc->sc_have_powerctl = 0;
|
||||
sc->sc_powerstate = 1;
|
||||
printf(": rev %s\n", ver);
|
||||
}
|
||||
|
||||
if (sa->sa_npromvaddrs)
|
||||
|
|
@ -283,7 +283,7 @@ dbri_attach_sbus(struct device *parent, struct device *self, void *aux)
|
|||
if (sbus_bus_map(sa->sa_bustag, sa->sa_slot,
|
||||
sa->sa_offset, sa->sa_size,
|
||||
BUS_SPACE_MAP_LINEAR, /*0,*/ &ioh) != 0) {
|
||||
printf("%s @ sbus: cannot map registers\n",
|
||||
aprint_error("%s @ sbus: cannot map registers\n",
|
||||
self->dv_xname);
|
||||
return;
|
||||
}
|
||||
|
|
@ -296,14 +296,14 @@ dbri_attach_sbus(struct device *parent, struct device *self, void *aux)
|
|||
/* get a DMA handle */
|
||||
if ((error = bus_dmamap_create(sc->sc_dmat, size, 1, size, 0,
|
||||
BUS_DMA_NOWAIT, &sc->sc_dmamap)) != 0) {
|
||||
printf("%s: DMA map create error %d\n", self->dv_xname, error);
|
||||
aprint_error("%s: DMA map create error %d\n", self->dv_xname, error);
|
||||
return;
|
||||
}
|
||||
|
||||
/* allocate DMA buffer */
|
||||
if ((error = bus_dmamem_alloc(sc->sc_dmat, size, 0, 0, &sc->sc_dmaseg,
|
||||
1, &rseg, BUS_DMA_NOWAIT)) != 0) {
|
||||
printf("%s: DMA buffer alloc error %d\n",
|
||||
aprint_error("%s: DMA buffer alloc error %d\n",
|
||||
self->dv_xname, error);
|
||||
return;
|
||||
}
|
||||
|
|
@ -312,7 +312,7 @@ dbri_attach_sbus(struct device *parent, struct device *self, void *aux)
|
|||
if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_dmaseg, rseg, size,
|
||||
&sc->sc_membase,
|
||||
BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
|
||||
printf("%s: DMA buffer map error %d\n",
|
||||
aprint_error("%s: DMA buffer map error %d\n",
|
||||
self->dv_xname, error);
|
||||
return;
|
||||
}
|
||||
|
|
@ -321,7 +321,7 @@ dbri_attach_sbus(struct device *parent, struct device *self, void *aux)
|
|||
if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap,
|
||||
sc->sc_membase, size, NULL,
|
||||
BUS_DMA_NOWAIT)) != 0) {
|
||||
printf("%s: DMA buffer map load error %d\n",
|
||||
aprint_error("%s: DMA buffer map load error %d\n",
|
||||
self->dv_xname, error);
|
||||
bus_dmamem_unmap(sc->sc_dmat, sc->sc_membase, size);
|
||||
bus_dmamem_free(sc->sc_dmat, &sc->sc_dmaseg, rseg);
|
||||
|
|
@ -363,18 +363,18 @@ dbri_set_power(struct dbri_softc *sc, int state)
|
|||
return;
|
||||
|
||||
if (state) {
|
||||
DPRINTF(("%s: waiting to power up... ", sc->sc_dev.dv_xname));
|
||||
DPRINTF("%s: waiting to power up... ", sc->sc_dev.dv_xname);
|
||||
s = splhigh();
|
||||
*AUXIO4M_REG |= (AUXIO4M_MMX);
|
||||
splx(s);
|
||||
delay(10000);
|
||||
DPRINTF(("done (%02x})\n", *AUXIO4M_REG));
|
||||
DPRINTF("done (%02x})\n", *AUXIO4M_REG);
|
||||
} else {
|
||||
DPRINTF(("%s: powering down\n", sc->sc_dev.dv_xname));
|
||||
DPRINTF("%s: powering down\n", sc->sc_dev.dv_xname);
|
||||
s = splhigh();
|
||||
*AUXIO4M_REG &= ~AUXIO4M_MMX;
|
||||
splx(s);
|
||||
DPRINTF(("done (%02x})\n", *AUXIO4M_REG));
|
||||
DPRINTF("done (%02x})\n", *AUXIO4M_REG);
|
||||
}
|
||||
sc->sc_powerstate = state;
|
||||
}
|
||||
|
|
@ -435,16 +435,16 @@ dbri_intr(void *hdl)
|
|||
u_int32_t tmp;
|
||||
|
||||
if (x & DBRI_MRR)
|
||||
printf("%s: multiple ack error on sbus\n",
|
||||
aprint_debug("%s: multiple ack error on sbus\n",
|
||||
sc->sc_dev.dv_xname);
|
||||
if (x & DBRI_MLE)
|
||||
printf("%s: multiple late error on sbus\n",
|
||||
aprint_debug("%s: multiple late error on sbus\n",
|
||||
sc->sc_dev.dv_xname);
|
||||
if (x & DBRI_LBG)
|
||||
printf("%s: lost bus grant on sbus\n",
|
||||
aprint_debug("%s: lost bus grant on sbus\n",
|
||||
sc->sc_dev.dv_xname);
|
||||
if (x & DBRI_MBE)
|
||||
printf("%s: burst error on sbus\n",
|
||||
aprint_debug("%s: burst error on sbus\n",
|
||||
sc->sc_dev.dv_xname);
|
||||
|
||||
/*
|
||||
|
|
@ -523,7 +523,8 @@ dbri_reset(struct dbri_softc *sc)
|
|||
bail++;
|
||||
delay(10);
|
||||
}
|
||||
if (bail == 100000) printf("%s: reset timed out\n",sc->sc_dev.dv_xname);
|
||||
if (bail == 100000) aprint_error("%s: reset timed out\n",
|
||||
sc->sc_dev.dv_xname);
|
||||
return (0);
|
||||
}
|
||||
|
||||
|
|
@ -532,7 +533,7 @@ dbri_command_lock(struct dbri_softc *sc)
|
|||
{
|
||||
|
||||
if (sc->sc_locked)
|
||||
printf("%s: command buffer locked\n", sc->sc_dev.dv_xname);
|
||||
aprint_debug("%s: command buffer locked\n", sc->sc_dev.dv_xname);
|
||||
|
||||
sc->sc_locked++;
|
||||
|
||||
|
|
@ -553,10 +554,10 @@ dbri_command_send(struct dbri_softc *sc, volatile u_int32_t *cmd)
|
|||
sc->sc_locked--;
|
||||
|
||||
if (sc->sc_locked != 0) {
|
||||
printf("%s: command buffer improperly locked\n",
|
||||
aprint_error("%s: command buffer improperly locked\n",
|
||||
sc->sc_dev.dv_xname);
|
||||
} else if ((cmd - &sc->sc_dma->command[0]) >= DBRI_NUM_COMMANDS - 1) {
|
||||
printf("%s: command buffer overflow\n", sc->sc_dev.dv_xname);
|
||||
aprint_error("%s: command buffer overflow\n", sc->sc_dev.dv_xname);
|
||||
} else {
|
||||
*(cmd++) = DBRI_CMD(DBRI_COMMAND_PAUSE, 0, 0);
|
||||
*(cmd++) = DBRI_CMD(DBRI_COMMAND_WAIT, 1, 0);
|
||||
|
|
@ -571,17 +572,17 @@ dbri_command_send(struct dbri_softc *sc, volatile u_int32_t *cmd)
|
|||
}
|
||||
|
||||
if (maxloops == 0) {
|
||||
printf("%s: chip never completed command buffer\n",
|
||||
aprint_error("%s: chip never completed command buffer\n",
|
||||
sc->sc_dev.dv_xname);
|
||||
} else {
|
||||
|
||||
DPRINTF(("%s: command completed\n",
|
||||
sc->sc_dev.dv_xname));
|
||||
DPRINTF("%s: command completed\n",
|
||||
sc->sc_dev.dv_xname);
|
||||
|
||||
while ((--maxloops) > 0 && (!sc->sc_waitseen))
|
||||
dbri_process_interrupt_buffer(sc);
|
||||
if (maxloops == 0) {
|
||||
printf("%s: chip never acked WAIT\n",
|
||||
aprint_error("%s: chip never acked WAIT\n",
|
||||
sc->sc_dev.dv_xname);
|
||||
}
|
||||
}
|
||||
|
|
@ -642,20 +643,20 @@ dbri_process_interrupt(struct dbri_softc *sc, int32_t i)
|
|||
break;
|
||||
}
|
||||
case DBRI_INTR_FXDT: /* fixed data change */
|
||||
DPRINTF(("dbri_intr: Fixed data change (%d: %x)\n", channel,
|
||||
val));
|
||||
DPRINTF("dbri_intr: Fixed data change (%d: %x)\n", channel,
|
||||
val);
|
||||
|
||||
if (sc->sc_pipe[channel].sdp & DBRI_SDP_MSB)
|
||||
val = reverse_bytes(val, sc->sc_pipe[channel].length);
|
||||
if (sc->sc_pipe[channel].prec)
|
||||
*(sc->sc_pipe[channel].prec) = val;
|
||||
DPRINTF(("%s: wakeup %p\n", sc->sc_dev.dv_xname, sc));
|
||||
DPRINTF("%s: wakeup %p\n", sc->sc_dev.dv_xname, sc);
|
||||
#if 0
|
||||
wakeup(sc);
|
||||
#endif
|
||||
break;
|
||||
case DBRI_INTR_SBRI:
|
||||
DPRINTF(("dbri_intr: SBRI\n"));
|
||||
DPRINTF("dbri_intr: SBRI\n");
|
||||
break;
|
||||
case DBRI_INTR_BRDY:
|
||||
{
|
||||
|
|
@ -664,7 +665,7 @@ dbri_process_interrupt(struct dbri_softc *sc, int32_t i)
|
|||
int rd = sc->sc_pipe[channel].desc;
|
||||
u_int32_t status;
|
||||
|
||||
printf("dbri_intr: BRDY\n");
|
||||
DPRINTF("dbri_intr: BRDY\n");
|
||||
if (rd < 0 || rd >= DBRI_NUM_DESCRIPTORS) {
|
||||
printf("%s: invalid rd on pipe\n", sc->sc_dev.dv_xname);
|
||||
break;
|
||||
|
|
@ -683,7 +684,7 @@ dbri_process_interrupt(struct dbri_softc *sc, int32_t i)
|
|||
volatile u_int32_t *cmd;
|
||||
int td = sc->sc_pipe[channel].desc;
|
||||
|
||||
printf("%s: DBRI_INTR_UNDR\n", sc->sc_dev.dv_xname);
|
||||
DPRINTF("%s: DBRI_INTR_UNDR\n", sc->sc_dev.dv_xname);
|
||||
|
||||
sc->sc_dma->desc[td].status = 0;
|
||||
|
||||
|
|
@ -701,8 +702,8 @@ dbri_process_interrupt(struct dbri_softc *sc, int32_t i)
|
|||
break;
|
||||
default:
|
||||
|
||||
DPRINTF(("%s: unknown interrupt code %d\n",
|
||||
sc->sc_dev.dv_xname, code));
|
||||
DPRINTF("%s: unknown interrupt code %d\n",
|
||||
sc->sc_dev.dv_xname, code);
|
||||
break;
|
||||
}
|
||||
|
||||
|
|
@ -722,29 +723,29 @@ mmcodec_init(struct dbri_softc *sc)
|
|||
int bail;
|
||||
|
||||
reg2 = bus_space_read_4(iot, ioh, DBRI_REG2);
|
||||
DPRINTF(("mmcodec_init: PIO reads %x\n", reg2));
|
||||
DPRINTF("mmcodec_init: PIO reads %x\n", reg2);
|
||||
|
||||
if (reg2 & DBRI_PIO2) {
|
||||
printf("%s: onboard CS4215 detected\n",
|
||||
aprint_normal("%s: onboard CS4215 detected\n",
|
||||
sc->sc_dev.dv_xname);
|
||||
sc->sc_mm.onboard = 1;
|
||||
}
|
||||
|
||||
if (reg2 & DBRI_PIO0) {
|
||||
printf("%s: speakerbox detected\n",
|
||||
aprint_normal("%s: speakerbox detected\n",
|
||||
sc->sc_dev.dv_xname);
|
||||
sc->sc_mm.onboard = 0;
|
||||
}
|
||||
|
||||
if ((reg2 & DBRI_PIO2) && (reg2 & DBRI_PIO0)) {
|
||||
printf("%s: using speakerbox\n",
|
||||
aprint_normal("%s: using speakerbox\n",
|
||||
sc->sc_dev.dv_xname);
|
||||
bus_space_write_4(iot, ioh, DBRI_REG2, DBRI_PIO2_ENABLE);
|
||||
sc->sc_mm.onboard = 0;
|
||||
}
|
||||
|
||||
if (!(reg2 & (DBRI_PIO0|DBRI_PIO2))) {
|
||||
printf("%s: no mmcodec found\n", sc->sc_dev.dv_xname);
|
||||
aprint_normal("%s: no mmcodec found\n", sc->sc_dev.dv_xname);
|
||||
return -1;
|
||||
}
|
||||
|
||||
|
|
@ -765,14 +766,14 @@ mmcodec_init(struct dbri_softc *sc)
|
|||
|
||||
bail++;
|
||||
if (bail > 100) {
|
||||
printf("%s: cs4215 probe failed at offset %d\n",
|
||||
DPRINTF("%s: cs4215 probe failed at offset %d\n",
|
||||
sc->sc_dev.dv_xname, sc->sc_mm.offset);
|
||||
return (-1);
|
||||
}
|
||||
delay(10000);
|
||||
}
|
||||
|
||||
printf("%s: cs4215 ver %d found at offset %d\n",
|
||||
aprint_normal("%s: cs4215 ver %d found at offset %d\n",
|
||||
sc->sc_dev.dv_xname, sc->sc_version & 0xf, sc->sc_mm.offset);
|
||||
|
||||
/* set some sane defaults for mmcodec_init_data */
|
||||
|
|
@ -969,13 +970,13 @@ mmcodec_setcontrol(struct dbri_softc *sc)
|
|||
}
|
||||
|
||||
if (i == 0) {
|
||||
printf("%s: cs4215 didn't respond to CLB (0x%02x)\n",
|
||||
DPRINTF("%s: cs4215 didn't respond to CLB (0x%02x)\n",
|
||||
sc->sc_dev.dv_xname, sc->sc_mm.status);
|
||||
return (-1);
|
||||
}
|
||||
#else
|
||||
while ((sc->sc_mm.status & 0xe4) != 0x20) {
|
||||
printf("%s: tsleep %p\n", sc->sc_dev.dv_xname, sc);
|
||||
DPRINTF("%s: tsleep %p\n", sc->sc_dev.dv_xname, sc);
|
||||
tsleep(sc, PCATCH | PZERO, "dbrifxdt", 0);
|
||||
}
|
||||
#endif
|
||||
|
|
@ -1033,14 +1034,14 @@ chi_reset(struct dbri_softc *sc, enum ms ms, int bpf)
|
|||
divisor = 12288 / clockrate;
|
||||
|
||||
if (divisor > 255 || divisor * clockrate != 12288)
|
||||
printf("%s: illegal bits-per-frame %d\n",
|
||||
aprint_error("%s: illegal bits-per-frame %d\n",
|
||||
sc->sc_dev.dv_xname, bpf);
|
||||
|
||||
*(cmd++) = DBRI_CMD(DBRI_COMMAND_CHI, 0,
|
||||
DBRI_CHI_CHICM(divisor) | DBRI_CHI_FD | DBRI_CHI_BPF(bpf));
|
||||
break;
|
||||
default:
|
||||
printf("%s: unknown value for ms!\n", sc->sc_dev.dv_xname);
|
||||
aprint_error("%s: unknown value for ms!\n", sc->sc_dev.dv_xname);
|
||||
break;
|
||||
}
|
||||
|
||||
|
|
@ -1062,15 +1063,15 @@ chi_reset(struct dbri_softc *sc, enum ms ms, int bpf)
|
|||
void
|
||||
pipe_setup(struct dbri_softc *sc, int pipe, int sdp)
|
||||
{
|
||||
DPRINTF(("pipe setup: %d\n", pipe));
|
||||
DPRINTF("pipe setup: %d\n", pipe);
|
||||
if (pipe < 0 || pipe >= DBRI_PIPE_MAX) {
|
||||
printf("%s: illegal pipe number %d\n", sc->sc_dev.dv_xname,
|
||||
aprint_error("%s: illegal pipe number %d\n", sc->sc_dev.dv_xname,
|
||||
pipe);
|
||||
return;
|
||||
}
|
||||
|
||||
if ((sdp & 0xf800) != sdp)
|
||||
printf("%s: strange SDP value %d\n", sc->sc_dev.dv_xname, sdp);
|
||||
aprint_error("%s: strange SDP value %d\n", sc->sc_dev.dv_xname, sdp);
|
||||
|
||||
if (DBRI_SDP_MODE(sdp) == DBRI_SDP_FIXED &&
|
||||
!(sdp & DBRI_SDP_TO_SER))
|
||||
|
|
@ -1095,14 +1096,14 @@ pipe_reset(struct dbri_softc *sc, int pipe)
|
|||
volatile u_int32_t *cmd;
|
||||
|
||||
if (pipe < 0 || pipe >= DBRI_PIPE_MAX) {
|
||||
printf("%s: illegal pipe number %d\n", sc->sc_dev.dv_xname,
|
||||
aprint_error("%s: illegal pipe number %d\n", sc->sc_dev.dv_xname,
|
||||
pipe);
|
||||
return;
|
||||
}
|
||||
|
||||
sdp = sc->sc_pipe[pipe].sdp;
|
||||
if (sdp == 0) {
|
||||
printf("%s: can not reset uninitialized pipe %d\n",
|
||||
aprint_error("%s: can not reset uninitialized pipe %d\n",
|
||||
sc->sc_dev.dv_xname, pipe);
|
||||
return;
|
||||
}
|
||||
|
|
@ -1134,19 +1135,19 @@ pipe_receive_fixed(struct dbri_softc *sc, int pipe, volatile u_int32_t *prec)
|
|||
{
|
||||
|
||||
if (pipe < DBRI_PIPE_MAX / 2 || pipe >= DBRI_PIPE_MAX) {
|
||||
printf("%s: illegal pipe number %d\n", sc->sc_dev.dv_xname,
|
||||
aprint_error("%s: illegal pipe number %d\n", sc->sc_dev.dv_xname,
|
||||
pipe);
|
||||
return;
|
||||
}
|
||||
|
||||
if (DBRI_SDP_MODE(sc->sc_pipe[pipe].sdp) != DBRI_SDP_FIXED) {
|
||||
printf("%s: non-fixed pipe %d\n", sc->sc_dev.dv_xname,
|
||||
aprint_error("%s: non-fixed pipe %d\n", sc->sc_dev.dv_xname,
|
||||
pipe);
|
||||
return;
|
||||
}
|
||||
|
||||
if (sc->sc_pipe[pipe].sdp & DBRI_SDP_TO_SER) {
|
||||
printf("%s: can not receive on transmit pipe %d\b",
|
||||
aprint_error("%s: can not receive on transmit pipe %d\b",
|
||||
sc->sc_dev.dv_xname, pipe);
|
||||
return;
|
||||
}
|
||||
|
|
@ -1162,24 +1163,24 @@ pipe_transmit_fixed(struct dbri_softc *sc, int pipe, u_int32_t data)
|
|||
volatile u_int32_t *cmd;
|
||||
|
||||
if (pipe < DBRI_PIPE_MAX / 2 || pipe >= DBRI_PIPE_MAX) {
|
||||
printf("%s: illegal pipe number %d\n", sc->sc_dev.dv_xname,
|
||||
aprint_error("%s: illegal pipe number %d\n", sc->sc_dev.dv_xname,
|
||||
pipe);
|
||||
return;
|
||||
}
|
||||
|
||||
if (DBRI_SDP_MODE(sc->sc_pipe[pipe].sdp) == 0) {
|
||||
printf("%s: uninitialized pipe %d\n", sc->sc_dev.dv_xname,
|
||||
aprint_error("%s: uninitialized pipe %d\n", sc->sc_dev.dv_xname,
|
||||
pipe);
|
||||
return;
|
||||
}
|
||||
|
||||
if (DBRI_SDP_MODE(sc->sc_pipe[pipe].sdp) != DBRI_SDP_FIXED) {
|
||||
printf("%s: non-fixed pipe %d\n", sc->sc_dev.dv_xname, pipe);
|
||||
aprint_error("%s: non-fixed pipe %d\n", sc->sc_dev.dv_xname, pipe);
|
||||
return;
|
||||
}
|
||||
|
||||
if (!(sc->sc_pipe[pipe].sdp & DBRI_SDP_TO_SER)) {
|
||||
printf("%s: called on receive pipe %d\n", sc->sc_dev.dv_xname,
|
||||
aprint_error("%s: called on receive pipe %d\n", sc->sc_dev.dv_xname,
|
||||
pipe);
|
||||
return;
|
||||
}
|
||||
|
|
@ -1211,19 +1212,19 @@ setup_ring(struct dbri_softc *sc, int pipe, int which, int num, int blksz,
|
|||
td_first = td_last = -1;
|
||||
|
||||
if (pipe < 0 || pipe >= DBRI_PIPE_MAX / 2) {
|
||||
printf("%s: illegal pipe number %d\n", sc->sc_dev.dv_xname,
|
||||
aprint_error("%s: illegal pipe number %d\n", sc->sc_dev.dv_xname,
|
||||
pipe);
|
||||
return;
|
||||
}
|
||||
|
||||
if (sc->sc_pipe[pipe].sdp == 0) {
|
||||
printf("%s: uninitialized pipe %d\n", sc->sc_dev.dv_xname,
|
||||
aprint_error("%s: uninitialized pipe %d\n", sc->sc_dev.dv_xname,
|
||||
pipe);
|
||||
return;
|
||||
}
|
||||
|
||||
if (!(sc->sc_pipe[pipe].sdp & DBRI_SDP_TO_SER)) {
|
||||
printf("%s: called on receive pipe %d\n",
|
||||
aprint_error("%s: called on receive pipe %d\n",
|
||||
sc->sc_dev.dv_xname, pipe);
|
||||
return;
|
||||
}
|
||||
|
|
@ -1257,7 +1258,7 @@ setup_ring(struct dbri_softc *sc, int pipe, int which, int num, int blksz,
|
|||
|
||||
/* the pipe shouldn't be active */
|
||||
if (pipe_active(sc, pipe)) {
|
||||
printf("pipe active (CDP)\n");
|
||||
aprint_error("pipe active (CDP)\n");
|
||||
/* pipe is already active */
|
||||
#if 0
|
||||
td_last = sc->sc_pipe[pipe].desc;
|
||||
|
|
@ -1303,13 +1304,13 @@ pipe_ts_link(struct dbri_softc *sc, int pipe, enum io dir, int basepipe,
|
|||
|
||||
if (pipe < 0 || pipe >= DBRI_PIPE_MAX ||
|
||||
basepipe < 0 || basepipe >= DBRI_PIPE_MAX) {
|
||||
printf("%s: illegal pipe numbers (%d, %d)\n",
|
||||
aprint_error("%s: illegal pipe numbers (%d, %d)\n",
|
||||
sc->sc_dev.dv_xname, pipe, basepipe);
|
||||
return;
|
||||
}
|
||||
|
||||
if (sc->sc_pipe[pipe].sdp == 0 || sc->sc_pipe[basepipe].sdp == 0) {
|
||||
printf("%s: uninitialized pipe (%d, %d)\n",
|
||||
aprint_error("%s: uninitialized pipe (%d, %d)\n",
|
||||
sc->sc_dev.dv_xname, pipe, basepipe);
|
||||
return;
|
||||
}
|
||||
|
|
@ -1371,7 +1372,7 @@ pipe_ts_link(struct dbri_softc *sc, int pipe, enum io dir, int basepipe,
|
|||
DBRI_TS_NEXT(nextpipe);
|
||||
break;
|
||||
default:
|
||||
printf("%s: should not have happened!\n",
|
||||
DPRINTF("%s: should not have happened!\n",
|
||||
sc->sc_dev.dv_xname);
|
||||
break;
|
||||
}
|
||||
|
|
@ -1712,9 +1713,9 @@ dbri_trigger_output(void *hdl, void *start, void *end, int blksize,
|
|||
count = (unsigned long)(((char *)end - (char *)start));
|
||||
num = count / blksize;
|
||||
|
||||
DPRINTF(("trigger_output(%lx %lx) : %d %ld %ld\n",
|
||||
DPRINTF("trigger_output(%lx %lx) : %d %ld %ld\n",
|
||||
(unsigned long)intr,
|
||||
(unsigned long)intrarg, blksize, count, num));
|
||||
(unsigned long)intrarg, blksize, count, num);
|
||||
|
||||
sc->sc_params = *param;
|
||||
|
||||
|
|
@ -1750,7 +1751,7 @@ reverse_bytes(u_int32_t b, int len)
|
|||
case 0:
|
||||
break;
|
||||
default:
|
||||
printf("reverse_bytes: unsupported length\n");
|
||||
DPRINTF("reverse_bytes: unsupported length\n");
|
||||
};
|
||||
|
||||
return (b);
|
||||
|
|
@ -1778,22 +1779,22 @@ static void
|
|||
dd->callback = NULL;
|
||||
dd->dmabase =
|
||||
dd->dmamap->dm_segs[0].ds_addr;
|
||||
DPRINTF(("dbri_malloc: using buffer %d\n",
|
||||
sc->sc_desc_used));
|
||||
DPRINTF("dbri_malloc: using buffer %d\n",
|
||||
sc->sc_desc_used);
|
||||
sc->sc_desc_used++;
|
||||
return dd->buf;
|
||||
} else
|
||||
printf("dbri_malloc: load failed\n");
|
||||
aprint_error("dbri_malloc: load failed\n");
|
||||
} else
|
||||
printf("dbri_malloc: map returned NULL\n");
|
||||
aprint_error("dbri_malloc: map returned NULL\n");
|
||||
} else
|
||||
printf("dbri_malloc: map failed\n");
|
||||
aprint_error("dbri_malloc: map failed\n");
|
||||
bus_dmamem_free(sc->sc_dmat, &dd->dmaseg, rseg);
|
||||
} else
|
||||
printf("dbri_malloc: malloc() failed\n");
|
||||
aprint_error("dbri_malloc: malloc() failed\n");
|
||||
bus_dmamap_destroy(sc->sc_dmat, dd->dmamap);
|
||||
} else
|
||||
printf("dbri_malloc: bus_dmamap_create() failed\n");
|
||||
aprint_error("dbri_malloc: bus_dmamap_create() failed\n");
|
||||
return NULL;
|
||||
}
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue