diff --git a/sys/arch/sun3/conf/DISKLESS b/sys/arch/sun3/conf/DISKLESS index eaa150bb1b2e..60a2534f636c 100644 --- a/sys/arch/sun3/conf/DISKLESS +++ b/sys/arch/sun3/conf/DISKLESS @@ -1,4 +1,4 @@ -# $NetBSD: DISKLESS,v 1.10 1995/10/08 23:38:41 gwr Exp $ +# $NetBSD: DISKLESS,v 1.11 1995/11/17 23:31:11 gwr Exp $ # # DISKLESS Sun3 (3/50, 3/60, 3/110, 3/160, 3/260) @@ -19,9 +19,9 @@ maxusers 4 options SWAPPAGER, VNODEPAGER, DEVPAGER # paging options KTRACE # system call tracing support #makeoptions DEBUG="-g" # symbols for kgdb + nm +#options DDB # Filesystem options -#options NFSSERVER # nfs server support options NFSCLIENT # nfs client support # options FDESC # /dev/fd/* @@ -37,11 +37,11 @@ options INET # IP prototol stack support options NFS_BOOT_RWSIZE=1024 # Compatability options -options COMPAT_SUNOS # can run SunOS 4.1.1 executables +options COMPAT_SUNOS # can run SunOS 4.1.1 executables #options COMPAT_09 # NetBSD 0.9, -options COMPAT_10 # NetBSD 1.0, -options COMPAT_43 # and 4.3BSD -options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD +options COMPAT_10 # NetBSD 1.0, +options COMPAT_43 # and 4.3BSD +options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD # Sun3-specific debugging options #options CONTEXT_DEBUG @@ -50,23 +50,53 @@ options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD #options SYSCALL_DEBUG #options EXEC_DEBUG #options DIAGNOSTIC -#options SCSIDEBUG config netbsd root on nfs swap on nfs -# Devices - -bwtwo0 at obmem0 addr ? -cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8 -cgfour0 at obmem0 addr ? +# +# Network devices +# +# Intel Ethernet (onboard, or VME) ie0 at obio0 addr ? level ? ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75 +# Lance Ethernet (only onboard) le0 at obio0 addr ? level ? +# +# Frame buffer devices +# + +# The default cgfour address depends on the machine: +# 3/60: obio 0xFF200000 .. 0xFF9fffff +# 3/110: different? (not tested) +cgfour0 at obmem0 addr ? + +# 3/60 P4 accelerated 8-bit color frame buffer +# cgsix0 at obmem0 addr ? + +# 3/60 P4 24-bit color frame buffer +# cgeight0 at obmem0 addr ? + +# The default bwtwo address depends on the machine: +# 3/50: obio 0x100000 +# else: obio 0xff000000 +bwtwo0 at obmem0 addr ? +# 3/60 P4 color frame buffer overlay plane, or P4 monochrome frame buffer +#bwtwo1 at obmem0 addr 0xff300000 +# 3/60 plug-in color frame buffer overlay plane +#bwtwo1 at obmem0 addr 0xff400000 + +# Sun-3 color board, or CG5 8-bit VME frame buffer. +cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8 + +# Support for the CG9 24-bit VME frame buffer. +# cgnine0 at vmel0 addr 0x08000000 + +# Misc. pseudo-device loop 1 # network loopback -#pseudo-device bpfilter 4 # packet filter +#pseudo-device bpfilter 8 # packet filter #pseudo-device sl 2 # CSLIP #pseudo-device ppp 2 # PPP #pseudo-device tun 2 # network tunneling over tty diff --git a/sys/arch/sun3/conf/GENERIC b/sys/arch/sun3/conf/GENERIC index eb317efa799d..50f1585f22be 100644 --- a/sys/arch/sun3/conf/GENERIC +++ b/sys/arch/sun3/conf/GENERIC @@ -1,4 +1,4 @@ -# $NetBSD: GENERIC,v 1.24 1995/10/08 23:38:43 gwr Exp $ +# $NetBSD: GENERIC,v 1.25 1995/11/17 23:31:12 gwr Exp $ # # GENERIC Sun3 (3/50, 3/60, 3/110, 3/160, 3/260) @@ -19,7 +19,7 @@ maxusers 4 options SWAPPAGER, VNODEPAGER, DEVPAGER # paging options KTRACE # system call tracing support #makeoptions DEBUG="-g" # symbols for kgdb + nm -options DDB +options DDB # Filesystem options options NFSSERVER # nfs server support @@ -36,7 +36,7 @@ options UNION # union file system # Networking options options INET # IP prototol stack support -# XXX - Work-around for slow SunOS/Sun3 servers (sigh...) +# XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...) options NFS_BOOT_RWSIZE=1024 # Compatability options @@ -47,31 +47,81 @@ options COMPAT_43 # and 4.3BSD options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD # Sun3-specific debugging options -options CONTEXT_DEBUG -options PMAP_DEBUG +#options CONTEXT_DEBUG +#options PMAP_DEBUG #options VMFAULT_TRACE #options SYSCALL_DEBUG -options EXEC_DEBUG +#options EXEC_DEBUG options DIAGNOSTIC options SCSIDEBUG config netbsd swap generic -# Devices - -bwtwo0 at obmem0 addr ? -cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8 -cgfour0 at obmem0 addr ? +# +# Network devices +# +# Intel Ethernet (onboard, or VME) ie0 at obio0 addr ? level ? ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75 +# Lance Ethernet (only onboard) le0 at obio0 addr ? level ? -si0 at obio0 addr ? level ? -si0 at vmes0 addr 0xff200000 level 2 vect 0x40 -si1 at vmes0 addr 0xff204000 level 2 vect 0x41 +# +# Disk and tape devices +# +# Sun3 "si" SCSI controller (NCR 5380) +ncr_si0 at obio0 addr ? level ? +ncr_si0 at vmes0 addr 0xff200000 level 2 vect 0x40 +ncr_si1 at vmes0 addr 0xff204000 level 2 vect 0x41 + +# Xylogics 7053 controllers +# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44 +# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45 +# xd* at xdc? drive ? + +# Xylogics 450/451 controllers +# xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48 +# xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49 +# xy* at xyc? drive ? + +# Xylogics 472 tape controllers? + +# +# Frame buffer devices +# + +# The default cgfour address depends on the machine: +# 3/60: obio 0xFF200000 .. 0xFF9fffff +# 3/110: different? (not tested) +cgfour0 at obmem0 addr ? + +# 3/60 P4 accelerated 8-bit color frame buffer +# cgsix0 at obmem0 addr ? + +# 3/60 P4 24-bit color frame buffer +# cgeight0 at obmem0 addr ? + +# The default bwtwo address depends on the machine: +# 3/50: obio 0x100000 +# else: obio 0xff000000 +bwtwo0 at obmem0 addr ? +# 3/60 P4 color frame buffer overlay plane, or P4 monochrome frame buffer +#bwtwo1 at obmem0 addr 0xff300000 +# 3/60 plug-in color frame buffer overlay plane +#bwtwo1 at obmem0 addr 0xff400000 + +# Sun-3 color board, or CG5 8-bit VME frame buffer. +cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8 + +# Support for the CG9 24-bit VME frame buffer. +# cgnine0 at vmel0 addr 0x08000000 + +# +# SCSI infrastructure +# scsibus* at scsi? # Sun compatible scsi device mappings @@ -90,9 +140,12 @@ cd* at scsibus? target ? lun ? #ch* at scsibus? target ? lun ? + +# RAM-disk drivers rd0 at mainbus? rd1 at mainbus? +# Misc. pseudo-device loop 1 # network loopback pseudo-device bpfilter 8 # packet filter pseudo-device sl 2 # CSLIP diff --git a/sys/arch/sun3/conf/Makefile.sun3 b/sys/arch/sun3/conf/Makefile.sun3 index c7379981a6eb..ef93edd51da5 100644 --- a/sys/arch/sun3/conf/Makefile.sun3 +++ b/sys/arch/sun3/conf/Makefile.sun3 @@ -1,4 +1,4 @@ -# $NetBSD: Makefile.sun3,v 1.34 1995/09/19 23:54:29 thorpej Exp $ +# $NetBSD: Makefile.sun3,v 1.35 1995/11/17 23:31:14 gwr Exp $ # # Makefile for NetBSD @@ -6,11 +6,11 @@ # This makefile is constructed from a machine description: # config machineid # Most changes should be made in the machine description -# /sys/conf/``machineid'' +# /sys/arch/sun3/conf/``machineid'' # after which you should do # config machineid # Machine generic makefile changes should be made in -# /sys/conf/Makefile.``machinetype'' +# /sys/arch/sun3/conf/Makefile.sun3 # after which config should be rerun for all machines of that type. # # N.B.: NO DEPENDENCIES ON FOLLOWING FLAGS ARE VISIBLE TO MAKEFILE @@ -35,7 +35,7 @@ SUN3= ../.. INCLUDES= -I. -I../.. -I$S/arch -I$S/sys -I$S COPTS= ${INCLUDES} ${IDENT} -D_KERNEL -Dmc68020 -Dsun3 # We do NOT want accidental FP instructions in the kernel. -CFLAGS= -Werror -fno-builtin -msoft-float ${DEBUG} ${COPTS} +CFLAGS= -Werror -msoft-float ${DEBUG} ${COPTS} # What to use for libkern: .include "$S/lib/libkern/Makefile.inc" @@ -111,7 +111,7 @@ clean:: lint: /tmp param.c @lint -hbxn -DGENERIC -Dvolatile= ${COPTS} ${PARAM} -UKGDB \ ${SUN3}/sun3/Locore.c ${CFILES} ${SUN3}/sun3/swapgeneric.c \ - ioconf.c param.c| \ + ioconf.c param.c | \ grep -v 'struct/union .* never defined' | \ grep -v 'possible pointer alignment problem' @@ -119,19 +119,14 @@ locore.o: assym.s ${SUN3}/sun3/locore.s ${SUN3}/include/asm.h \ ${SUN3}/include/trap.h $S/arch/m68k/include/trap.h ${CPP} -DLOCORE ${COPTS} ${SUN3}/sun3/locore.s | ${AS} -o locore.o -# the following is necessary because autoconf.o depends on #if GENERIC -autoconf.o: Makefile +# depends on root or device configuration +autoconf.o conf.o : Makefile -# depends on device configuration -conf.o : Makefile +# depends on the supported CPU types +locore.o sun3_startup.o pmap.o trap.o : Makefile # depends on network or filesystem configuration -uipc_proto.o vfs_conf.o : Makefile - -# depends on value of SYMTAB_SPACE -db_aout.o : Makefile - -sun3_startup.o pmap.o kern_xxx.o: Makefile +uipc_proto.o vfs_conf.o kern_xxx.o : Makefile # depend on maxusers assym.s: Makefile diff --git a/sys/arch/sun3/conf/RAMDISK b/sys/arch/sun3/conf/RAMDISK index b9db67cc3fad..b6a0eb87049f 100644 --- a/sys/arch/sun3/conf/RAMDISK +++ b/sys/arch/sun3/conf/RAMDISK @@ -1,4 +1,4 @@ -# $NetBSD: RAMDISK,v 1.1 1995/10/08 23:38:44 gwr Exp $ +# $NetBSD: RAMDISK,v 1.2 1995/11/17 23:31:15 gwr Exp $ # # RAMDISK: Root/swap on ramdisk @@ -13,15 +13,17 @@ include "std.sun3" # Machines to be supported by this kernel options HAVECACHE # Sun3/260 VAC -# Enable the hooks used for initializing the ram-disk. -options RAMDISK_HOOKS -options MINIROOTSIZE=512 # 256K - # Needs to be set per system. i.e change these as you see fit maxusers 2 # Standard system options options SWAPPAGER, VNODEPAGER, DEVPAGER # paging +#makeoptions DEBUG="-g" # symbols for kgdb + nm +#options DDB + +# Enable the hooks used for initializing the ram-disk. +options RAMDISK_HOOKS +options MINIROOTSIZE=512 # 256K # Filesystem options # May need NFSCLIENT to get miniroot image @@ -32,8 +34,6 @@ options FIFO # FIFOs; RECOMMENDED # Networking options options INET # IP prototol stack support -# XXX - Work-around for slow SunOS/Sun3 servers (sigh...) -options NFS_BOOT_RWSIZE=1024 # Compatability options (XXX - Need these?) #options COMPAT_SUNOS # can run SunOS 4.1.1 executables @@ -43,28 +43,51 @@ options COMPAT_43 # and 4.3BSD options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD # Sun3-specific debugging options -# options DDB options DIAGNOSTIC # The config program assumes all devices have partions... # Is it OK to put swap on a non-existent partition? config netbsd root on rd0a swap on rd0b -# Devices - -# RAM Disk (root for install tape) -rd0 at mainbus? - -# No frame-buffer devices. +# +# Network devices +# +# Intel Ethernet (onboard, or VME) ie0 at obio0 addr ? level ? ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75 +# Lance Ethernet (only onboard) le0 at obio0 addr ? level ? -si0 at obio0 addr ? level ? -si0 at vmes0 addr 0xff200000 level 2 vect 0x40 +# +# Disk and tape devices +# +# Sun3 "si" SCSI controller (NCR 5380) +ncr_si0 at obio0 addr ? level ? +ncr_si0 at vmes0 addr 0xff200000 level 2 vect 0x40 +ncr_si1 at vmes0 addr 0xff204000 level 2 vect 0x41 + +# Xylogics 7053 controllers +# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44 +# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45 +# xd* at xdc? drive ? + +# Xylogics 450/451 controllers +# xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48 +# xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49 +# xy* at xyc? drive ? + +# Xylogics 472 tape controllers? + +# +# Frame buffer devices +# (Not needed for the RAMDISK installation kernel) + +# +# SCSI infrastructure +# scsibus* at scsi? # Sun compatible scsi device mappings @@ -83,5 +106,12 @@ cd* at scsibus? target ? lun ? #ch* at scsibus? target ? lun ? -pseudo-device loop 1 # network loopback + +# RAM Disk (root for install tape) +rd0 at mainbus? + +# Misc. +pseudo-device loop 1 # network loopback +pseudo-device sl 2 # CSLIP +pseudo-device ppp 2 # PPP