remove incomplete miniroot configuration.

This commit is contained in:
mrg 2000-08-10 14:32:29 +00:00
parent 339b9c00a1
commit 84cb48f20c
3 changed files with 0 additions and 390 deletions

View File

@ -1,252 +0,0 @@
# $NetBSD: install.md,v 1.1 1999/01/23 06:44:38 mrg Exp $
#
#
# Copyright (c) 1996 The NetBSD Foundation, Inc.
# All rights reserved.
#
# This code is derived from software contributed to The NetBSD Foundation
# by Jason R. Thorpe.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
# must display the following acknowledgement:
# This product includes software developed by the NetBSD
# Foundation, Inc. and its contributors.
# 4. Neither the name of The NetBSD Foundation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
#
# machine dependent section of installation/upgrade script.
#
# Machine-dependent install sets
MDSETS="xbase xcomp xcontrib xfont xserver"
md_set_term() {
if [ ! -z "$TERM" ]; then
return
fi
echo -n "Specify terminal type [sun]: "
getresp "sun"
TERM="$resp"
export TERM
}
md_makerootwritable() {
# Was: do_mfs_mount "/tmp" "2048"
# /tmp is the mount point
# 2048 is the size in DEV_BIZE blocks
umount /tmp > /dev/null 2>&1
if ! mount_mfs -s 2048 swap /tmp ; then
cat << \__mfs_failed_1
FATAL ERROR: Can't mount the memory filesystem.
__mfs_failed_1
exit
fi
# Bleh. Give mount_mfs a chance to DTRT.
sleep 2
}
md_get_diskdevs() {
# return available disk devices
dmesg | egrep "(^sd[0-9] |^x[dy][0-9] )" | cut -d" " -f1 | sort -u
}
md_get_cddevs() {
# return available CDROM devices
dmesg | grep "^cd[0-9] " | cut -d" " -f1 | sort -u
}
md_get_ifdevs() {
# return available network devices
dmesg | egrep "(^le[0-9] |^be[0-9] |^hme[0-9] |^qe[0-9] )" | cut -d" " -f1 | sort -u
}
md_get_partition_range() {
# return range of valid partition letters
echo "[a-h]"
}
md_installboot() {
# $1 is the disk install a boot block on
echo "Installing boot block..."
/usr/mdec/installboot /usr/mdec/bootblk $1
}
md_native_fstype() {
}
md_native_fsopts() {
}
md_checkfordisklabel() {
# $1 is the disk to check
local rval
disklabel $1 > /dev/null 2> /tmp/checkfordisklabel
if grep "no disk label" /tmp/checkfordisklabel; then
rval=1
elif grep "disk label corrupted" /tmp/checkfordisklabel; then
rval=2
else
rval=0
fi
rm -f /tmp/checkfordisklabel
return $rval
}
md_prep_disklabel()
{
local _disk
_disk=$1
md_checkfordisklabel $_disk
case $? in
0)
echo -n "Do you wish to edit the disklabel on $_disk? [y]"
;;
1)
echo "WARNING: Disk $_disk has no label"
echo -n "Do you want to create one with the disklabel editor? [y]"
;;
2)
echo "WARNING: Label on disk $_disk is corrupted"
echo -n "Do you want to try and repair the damage using the disklabel editor? [y]"
;;
esac
getresp "y"
case "$resp" in
y*|Y*) ;;
*) return ;;
esac
# display example
cat << \__md_prep_disklabel_1
Here is an example of what the partition information will look like once
you have entered the disklabel editor. Disk partition sizes and offsets
are in sector (most likely 512 bytes) units. Make sure these size/offset
pairs are on cylinder boundaries (the number of sector per cylinder is
given in the `sectors/cylinder' entry, which is not shown here).
Do not change any parameters except the partition layout and the label name.
It's probably also wisest not to touch the `8 partitions:' line, even
in case you have defined less than eight partitions.
[Example]
8 partitions:
# size offset fstype [fsize bsize cpg]
a: 50176 0 4.2BSD 1024 8192 16 # (Cyl. 0 - 111)
b: 64512 50176 swap # (Cyl. 112 - 255)
c: 640192 0 unknown # (Cyl. 0 - 1428)
d: 525504 114688 4.2BSD 1024 8192 16 # (Cyl. 256 - 1428)
[End of example]
__md_prep_disklabel_1
echo -n "Press [Enter] to continue "
getresp ""
disklabel -W ${_disk}
disklabel -e ${_disk}
}
md_copy_kernel() {
echo -n "Copying kernel..."
cp -p /netbsd /mnt/netbsd
echo "done."
}
md_welcome_banner() {
{
if [ "$MODE" = "install" ]; then
echo ""
echo "Welcome to the NetBSD/sparc64 ${VERSION} installation program."
cat << \__welcome_banner_1
This program is designed to help you put NetBSD on your disk,
in a simple and rational way. You'll be asked several questions,
and it would probably be useful to have your disk's hardware
manual, the installation notes, and a calculator handy.
__welcome_banner_1
else
echo ""
echo "Welcome to the NetBSD/sparc64 ${VERSION} upgrade program."
cat << \__welcome_banner_2
This program is designed to help you upgrade your NetBSD system in a
simple and rational way.
As a reminder, installing the `etc' binary set is NOT recommended.
Once the rest of your system has been upgraded, you should manually
merge any changes to files in the `etc' set into those files which
already exist on your system.
__welcome_banner_2
fi
cat << \__welcome_banner_3
As with anything which modifies your disk's contents, this
program can cause SIGNIFICANT data loss, and you are advised
to make sure your data is backed up before beginning the
installation process.
Default answers are displayed in brackets after the questions.
You can hit Control-C at any time to quit, but if you do so at a
prompt, you may have to hit return. Also, quitting in the middle of
installation may leave your system in an inconsistent state.
__welcome_banner_3
} | more
}
md_not_going_to_install() {
cat << \__not_going_to_install_1
OK, then. Enter `halt' at the prompt to halt the machine. Once the
machine has halted, power-cycle the system to load new boot code.
__not_going_to_install_1
}
md_congrats() {
local what;
if [ "$MODE" = "install" ]; then
what="installed";
else
what="upgraded";
fi
cat << __congratulations_1
CONGRATULATIONS! You have successfully $what NetBSD!
To boot the installed system, enter halt at the command prompt. Once the
system has halted, reset the machine and boot from the disk.
__congratulations_1
}

View File

@ -1,81 +0,0 @@
# $NetBSD: dot.profile,v 1.5 2000/06/14 22:52:47 cgd Exp $
#
# Copyright (c) 1995 Jason R. Thorpe
# Copyright (c) 1994 Christopher G. Demetriou
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
# must display the following acknowledgement:
# This product includes software developed for the
# NetBSD Project. See http://www.netbsd.org/ for
# information about NetBSD.
# 4. The name of the author may not be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# <<Id: LICENSE,v 1.2 2000/06/14 15:57:33 cgd Exp>>
PATH=/sbin:/bin:/usr/bin:/usr/sbin:/
export PATH
TERM=sun
export TERM
HOME=/
export HOME
umask 022
if [ "X${DONEPROFILE}" = "X" ]; then
DONEPROFILE=YES
export DONEPROFILE
# set up some sane defaults
echo 'erase ^H, werase ^W, kill ^U, intr ^C'
stty newcrt werase ^W intr ^C kill ^U erase ^H 9600
# get the terminal type
_forceloop=""
while [ "X${_forceloop}" = X"" ]; do
eval `tset -s -m ":?$TERM"`
if [ "X${TERM}" != X"unknown" ]; then
_forceloop="done"
fi
done
# Installing or upgrading?
_forceloop=""
while [ "X${_forceloop}" = X"" ]; do
echo -n '(I)nstall or (U)pgrade? '
read _forceloop
case "$_forceloop" in
i*|I*)
/install
;;
u*|U*)
/upgrade
;;
*)
_forceloop=""
;;
esac
done
fi

View File

@ -1,57 +0,0 @@
# $NetBSD: list,v 1.2 2000/05/02 16:06:55 sjg Exp $
# UltraSPARC extra's
LINK instbin sbin/disklabel
LINK instbin sbin/dmesg
SYMLINK ../../instbin usr/bin/basename
SYMLINK ../../instbin usr/bin/cksum usr/bin/sum
SYMLINK ../../instbin usr/bin/cut
SYMLINK ../../instbin usr/bin/gawk usr/bin/awk
SYMLINK ../../instbin usr/bin/getopt
SYMLINK ../../instbin usr/bin/grep usr/bin/egrep usr/bin/fgrep
SYMLINK ../../instbin usr/bin/netstat
SYMLINK ../../instbin usr/bin/rsh
SYMLINK ../../instbin usr/bin/tset usr/bin/reset
SYMLINK ../../instbin usr/bin/vi
SYMLINK ../../instbin usr/bin/less usr/bin/more
SYMLINK ../../instbin usr/sbin/sysctl
# crunchgen source directory specials
CRUNCHSPECIAL vi srcdir usr.bin/vi/build
CRUNCHSPECIAL less srcdir usr.bin/less/less
# Minimize use of MFS
SYMLINK /tmp var/tmp
# copy the MAKEDEV script and make some devices
COPY ${DESTDIR}/dev/MAKEDEV dev/MAKEDEV
COPY ${DESTDIR}/dev/MAKEDEV.local dev/MAKEDEV.local
SPECIAL cd dev; sh MAKEDEV all
SPECIAL /bin/rm dev/MAKEDEV
# we need the contents of /usr/mdec
COPYDIR ${DESTDIR}/usr/mdec usr/mdec
# the zoneinfo
COPYDIR ${DESTDIR}/usr/share/zoneinfo usr/share/zoneinfo
# and the termcap file
COPY ${CURDIR}/../../share/termcap/termcap.src usr/share/misc/termcap
# copy the kernel
COPY ${KERNOBJDIR:-${CURDIR}/../../sys/arch/sparc64/compile}/GENERIC/netbsd netbsd
# various files that we need in /etc for the install
COPY ${DESTDIR}/etc/disktab etc/disktab.shadow
SYMLINK /tmp/disktab.shadow etc/disktab
SYMLINK /tmp/fstab.shadow etc/fstab
SYMLINK /tmp/resolv.conf.shadow etc/resolv.conf
SYMLINK /tmp/hosts etc/hosts
# and the installation tools
COPY ${ARCHDIR}/dot.profile .profile
COPY ${ARCHDIR}/../install.md install.md
COPY ${DESTDIR}/usr/mdec/boot boot
SPECIAL sync; ${DESTDIR}/usr/mdec/binstall -m${DESTDIR}/usr/mdec -v ffs ${TARGDIR}