Don't use EIMC_OTHER bit because it's read only other than 82598.

Documents say:

  82598:
     All of bit 31(OTHER bit) of EIxx are reserved. In reality, at least
    EIMS_OTHER and EIMC_OTHER exist and the OTHER interrupt doesn't work
    without EIMS_OTHER.

  Other than 82598:
     EIMS_OTHER is read only and EIMC_OTHER doesn't exist. If one of
    bit 29..16 is set, EIMS_OTHER is set to 1 (Note that bit 30(TCP timer
    isn't included)). Even if write bit 31 of EIMC to 1, it's ignored
    (EIMS_OTHER doesn't set).

 We introduced new spin mutex in ixgbe.c rev. 1.260, so it's OK to remove
EIMC_OTHER stuff. We already set EIMS_OTHER in if_init(), so keep it for
82598. No functional change other than 82598.

 Another solution is to control bit 30..16 directly to mask/unmask interrupt
instead of the mutex.

TODO:
  Some MSI-X interrupt(LSC, module insertion/removal etc.)'s mask/unmask
  code between ixgbe_msix_admin() and ixgbe_handle_admin() may be wrong.
  It'll be fixed later.
This commit is contained in:
msaitoh 2020-12-11 05:01:19 +00:00
parent 2ef9bcafb7
commit 79570ba1ba
2 changed files with 16 additions and 14 deletions

View File

@ -1,4 +1,4 @@
/* $NetBSD: ixgbe.c,v 1.261 2020/11/30 07:53:42 msaitoh Exp $ */
/* $NetBSD: ixgbe.c,v 1.262 2020/12/11 05:01:19 msaitoh Exp $ */
/******************************************************************************
@ -3095,9 +3095,6 @@ ixgbe_msix_admin(void *arg)
++adapter->admin_irqev.ev_count;
/* Pause other interrupts */
IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_OTHER);
/* First get the cause */
/*
* The specifications of 82598, 82599, X540 and X550 say EICS register
@ -3219,9 +3216,6 @@ ixgbe_msix_admin(void *arg)
adapter->task_requests |= task_requests;
ixgbe_schedule_admin_tasklet(adapter);
mutex_exit(&adapter->admin_mtx);
} else {
/* Re-enable other interrupts */
IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_OTHER);
}
return 1;
@ -4809,7 +4803,6 @@ ixgbe_handle_admin(struct work *wk, void *context)
{
struct adapter *adapter = context;
struct ifnet *ifp = adapter->ifp;
struct ixgbe_hw *hw = &adapter->hw;
u32 task_requests;
mutex_enter(&adapter->admin_mtx);
@ -4848,11 +4841,12 @@ ixgbe_handle_admin(struct work *wk, void *context)
}
#endif
if ((task_requests & IXGBE_REQUEST_TASK_NEED_ACKINTR) != 0) {
if ((adapter->feat_en & IXGBE_FEATURE_MSIX) != 0) {
/* Re-enable other interrupts */
IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_OTHER);
} else
ixgbe_enable_intr(adapter);
/*
* XXX FIXME.
* ixgbe_enable_intr() enables all interrupts. It might enable
* an interrupt which should not be enabled.
*/
ixgbe_enable_intr(adapter);
}
IXGBE_CORE_UNLOCK(adapter);

View File

@ -1,4 +1,4 @@
/* $NetBSD: ixgbe_type.h,v 1.45 2020/08/31 11:19:54 msaitoh Exp $ */
/* $NetBSD: ixgbe_type.h,v 1.46 2020/12/11 05:01:19 msaitoh Exp $ */
/******************************************************************************
SPDX-License-Identifier: BSD-3-Clause
@ -1998,6 +1998,13 @@ enum {
#define IXGBE_EIMS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
#define IXGBE_EIMS_DHER IXGBE_EICR_DHER /* Descr Handler Error */
#define IXGBE_EIMS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
/*
* EIMS_OTHER is R/W on 82598 though the document says it's reserved.
* It MUST be required to set this bit to get OTHER interrupt.
*
* On other chips, it's read only. It's set if any bits of 29..16 is not zero.
* Bit 30 (TCP_TIMER) doesn't affect to EIMS_OTHER.
*/
#define IXGBE_EIMS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
/* Extended Interrupt Mask Clear */
@ -2019,6 +2026,7 @@ enum {
#define IXGBE_EIMC_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
#define IXGBE_EIMC_DHER IXGBE_EICR_DHER /* Desc Handler Err */
#define IXGBE_EIMC_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
/* EIMC_OTHER works only on 82598. See EIMS_OTHER's comment */
#define IXGBE_EIMC_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
#define IXGBE_EIMS_ENABLE_MASK ( \