diff --git a/sys/arch/i386/conf/ARMADA b/sys/arch/i386/conf/ARMADA new file mode 100644 index 000000000000..7dc0d7becb93 --- /dev/null +++ b/sys/arch/i386/conf/ARMADA @@ -0,0 +1,916 @@ +# $NetBSD: ARMADA,v 1.1 2001/07/06 18:00:50 mcr Exp $ +# +# CARDBUS: GENERIC + CardBus support. Additionally, some +# things typically not found on laptops have been commented out. + +# from: GENERIC,v 1.400 2001/02/04 17:36:03 perry Exp $ +# + +include "arch/i386/conf/std.i386" + +#ident "CARDBUS-$Revision: 1.1 $" + +maxusers 32 # estimated number of users + +# CPU support. At least one is REQUIRED. +options I386_CPU +options I486_CPU +options I586_CPU +options I686_CPU + +# CPU-related options. +options MATH_EMULATE # floating point emulation +options VM86 # virtual 8086 emulation +options USER_LDT # user-settable LDT; used by WINE +# eliminate delay no-ops in I/O; recommended on all but very old machines +#options DUMMY_NOPS + +# delay between "rebooting ..." message and hardware reset, in milliseconds +#options CPURESET_DELAY=2000 + +# This option allows you to force a serial console at the specified +# I/O address. see console(4) for details. +#options "CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600 +# you don't want the option below ON iff you are using the +# serial console option of the new boot strap code. +#options CONS_OVERRIDE # Always use above! independent of boot info + +# The following options override the memory sizes passed in from the boot +# block. Use them *only* if the boot block is unable to determine the correct +# values. Note that the BIOS may *correctly* report less than 640k of base +# memory if the extended BIOS data area is located at the top of base memory +# (as is the case on most recent systems). +#options REALBASEMEM=639 # size of base memory (in KB) +#options REALEXTMEM=15360 # size of extended memory (in KB) + +# Standard system options + +options UCONSOLE # users can use TIOCCONS (for xconsole) +options INSECURE # disable kernel security levels + +options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT +options NTP # NTP phase/frequency locked loop + +options KTRACE # system call tracing via ktrace(1) + +options SYSVMSG # System V-like message queues +options SYSVSEM # System V-like semaphores +options SYSVSHM # System V-like memory sharing +#options SHMMAXPGS=1024 # 1024 pages is the default + +options LKM # loadable kernel modules + +# Diagnostic/debugging support options +options DIAGNOSTIC # expensive kernel consistency checks +#options DEBUG # expensive debugging checks/support +#options KMEMSTATS # kernel memory statistics (vmstat -m) +options DDB # in-kernel debugger +options DDB_HISTORY_SIZE=512 # enable history editing in DDB +#options KGDB # remote debugger +#options "KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600 +#makeoptions DEBUG="-g" # compile full symbol table + +# Compatibility options +options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8, +options COMPAT_09 # NetBSD 0.9, +options COMPAT_10 # NetBSD 1.0, +options COMPAT_11 # NetBSD 1.1, +options COMPAT_12 # NetBSD 1.2, +options COMPAT_13 # NetBSD 1.3, +options COMPAT_14 # NetBSD 1.4, +options COMPAT_15 # NetBSD 1.5, +options COMPAT_43 # and 4.3BSD +options COMPAT_386BSD_MBRPART # recognize old partition ID + +options COMPAT_SVR4 # binary compatibility with SVR4 +options COMPAT_IBCS2 # binary compatibility with SCO and ISC +options COMPAT_LINUX # binary compatibility with Linux +options COMPAT_FREEBSD # binary compatibility with FreeBSD +#options COMPAT_PECOFF # kernel support to run Win32 apps + +# File systems +file-system FFS # UFS +file-system EXT2FS # second extended file system (linux) +file-system LFS # log-structured file system +file-system MFS # memory file system +file-system NFS # Network File System client +file-system NTFS # Windows/NT file system (experimental) +file-system CD9660 # ISO 9660 + Rock Ridge file system +file-system MSDOSFS # MS-DOS file system +file-system FDESC # /dev/fd +file-system KERNFS # /kern +file-system NULLFS # loopback file system +file-system OVERLAY # overlay file system +file-system PORTAL # portal filesystem (still experimental) +file-system PROCFS # /proc +file-system UMAPFS # NULLFS + uid and gid remapping +file-system UNION # union file system +file-system CODA # Coda File System; also needs vcoda (below) + +# File system options +options QUOTA # UFS quotas +#options FFS_EI # FFS Endian Independent support +options SOFTDEP # FFS soft updates support. +options NFSSERVER # Network File System server +#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and + # immutable) behave as system flags. + +# Networking options +#options GATEWAY # packet forwarding +options INET # IP + ICMP + TCP + UDP +options INET6 # IPV6 +#options IPSEC # IP security +#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) +#options IPSEC_DEBUG # debug for IP security +#options MROUTING # IP multicast routing +options NS # XNS +#options NSIP # XNS tunneling over IP +options ISO,TPIP # OSI +#options EON # OSI tunneling over IP +options CCITT,LLC,HDLC # X.25 +options NETATALK # AppleTalk networking protocols +options PPP_BSDCOMP # BSD-Compress compression support for PPP +options PPP_DEFLATE # Deflate compression support for PPP +options PPP_FILTER # Active filter support for PPP (requires bpf) +options PFIL_HOOKS # pfil(9) packet filter hooks +options IPFILTER_LOG # ipmon(8) log support + +# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended. +#options TCP_COMPAT_42 + +# These options enable verbose messages for several subsystems. +# Warning, these may compile large string tables into the kernel! +options EISAVERBOSE # verbose EISA device autoconfig messages +options MIIVERBOSE # verbose PHY autoconfig messages +options PCIVERBOSE # verbose PCI device autoconfig messages +#options PCI_CONFIG_DUMP # verbosely dump PCI config space +#options PCMCIAVERBOSE # verbose PCMCIA configuration messages +options SCSIVERBOSE # human readable SCSI error messages +options USBVERBOSE # verbose USB device autoconfig messages +#options PNPBIOSVERBOSE # verbose PnP BIOS messages +#options PNPBIOSDEBUG # more fulsome PnP BIOS debugging messages +#options I2OVERBOSE # verbose I2O driver messages + +options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM + +# +# wscons options +# +# builtin terminal emulations +#options WSEMUL_SUN # sun terminal emulation +options WSEMUL_VT100 # VT100 / VT220 emulation +# different kernel output - see dev/wscons/wsdisplayvar.h +options WS_KERNEL_FG=WSCOL_GREEN +#options WS_KERNEL_BG=WSCOL_BLACK +# compatibility to other console drivers +options WSDISPLAY_COMPAT_PCVT # emulate some ioctls +options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls +options WSDISPLAY_COMPAT_USL # VT handling +options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes +# see dev/pckbc/wskbdmap_mfii.c for implemented layouts +#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" +# allocate a number of virtual screens at autoconfiguration time +#options WSDISPLAY_DEFAULTSCREENS=4 +# use a large software cursor that doesn't blink +options PCDISPLAY_SOFTCURSOR +# modify the screen type of the console; defaults to "80x25" +#options VGA_CONSOLE_SCREENTYPE="\"80x24\"" + +# Kernel root file system and dump configuration. +config netbsd root on ? type ? +#config netbsd root on sd0a type ffs +#config netbsd root on ? type nfs + +# +# Device configuration +# + +mainbus0 at root + +#apm0 at mainbus0 # Advanced power management + +# Tuning for power management, see apm(4) for more details. +#options APM_NO_IDLE # Don't call BIOS CPU idle function +#options APM_V10_ONLY # Use only the APM 1.0 calls +#options APM_NO_POWEROFF # Don't power off on halt(8) +#options APM_POWER_PRINT # Print stats on the console +#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts + + +# Basic Bus Support + +# Plug-and-Play BIOS and attached devices + +#pnpbios* at mainbus? + +# mainboard audio chips +#ess* at pnpbios? index ? # ESS AudioDrive +#sb* at pnpbios? index ? # NeoMagic 256AV in sb mode +#wss* at pnpbios? index ? # NeoMagic 256AV in wss mode +#ym* at pnpbios? index ? # OPL3-SA3 + +# com port +# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial +# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there +# will be no com0. A side effect is pcmcia (and other) com? previously +# starting at com3 may attach as com1 or com2. +#com* at pnpbios? index ? # serial ports + +# parallel port +# The above "com*" comments apply, cf. "lpt0" under "ISA parallel +# "printer interfaces". +#lpt* at pnpbios? index ? # parallel ports + +#pckbc* at pnpbios? index ? # PC keyboard/mouse controller +#fdc* at pnpbios? index ? # floppy controller + +# IDE controller on Toshiba Portege 3000 series (crippled PCI device) +#pciide* at pnpbios? index ? + +# PCI bus support +pci* at mainbus? bus ? +pci* at pchb? bus ? +pci* at ppb? bus ? + +# Configure PCI using BIOS information +options PCIBIOS # PCI BIOS support +#options PCIBIOSVERBOSE # PCI BIOS verbose info +options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses +options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering +options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing +#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11 +options PCIBIOS_INTR_GUESS # see pcibios(4) +#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup + +# PCI bridges +pchb* at pci? dev ? function ? # PCI-Host bridges +pceb* at pci? dev ? function ? # PCI-EISA bridges +pcib* at pci? dev ? function ? # PCI-ISA bridges +ppb* at pci? dev ? function ? # PCI-PCI bridges +ppb* at cardbus? dev ? function ? # Cardbus-PCI bridges (www.magma.com) +# XXX 'puc's aren't really bridges, but there's no better place for them here +puc* at pci? dev ? function ? # PCI "universal" comm. cards + +# EISA bus support +#eisa* at mainbus? +#eisa* at pceb? + +# ISA bus support +isa* at mainbus? +isa* at pceb? +isa* at pcib? + +# PCMCIA bus support +#pcmcia* at pcic? controller ? socket ? +#pcmcia* at tcic? controller ? socket ? + +# ISA PCMCIA controllers +#pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000 +#pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000 +#tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000 + +# PCI PCMCIA controllers +#pcic0 at pci? dev? function ? + +# ISA Plug-and-Play bus support +#isapnp0 at isa? + +# ISA Plug-and-Play PCMCIA controllers +#pcic* at isapnp? + +# CardBus bridge support +cbb* at pci? dev ? function ? +cardslot* at cbb? + +# CardBus bus support +# following makes ARMADA M700's happy +options RBUS_MIN_START=0x20000000 +cardbus* at cardslot? +pcmcia* at cardslot? + +# Coprocessor Support + +# Math Coprocessor support +npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor + + +# Console Devices + +# ISA console +#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver +# Keyboard layout configuration for pccons +#options FRENCH_KBD +#options FINNISH_KBD +#options GERMAN_KBD +#options NORWEGIAN_KBD +# pccons-specific options: +#options XSERVER_DDB # PF12 gets you into DDB when X is running +#options XSERVER # X server support + + +# wscons +pckbc0 at isa? # pc keyboard controller +pckbd* at pckbc? # PC keyboard +# "opms" should not be enabled together with "pms" or "pmsi" +pms* at pckbc? # PS/2 mouse for wsmouse +pmsi* at pckbc? # PS/2 "Intelli"mouse for wsmouse +#opms* at pckbc? # backwards compatible PS/2 mouse +vga0 at isa? +vga* at pci? dev ? function ? +pcdisplay0 at isa? # CGA, MDA, EGA, HGA +wsdisplay* at vga? console ? +wsdisplay* at pcdisplay? console ? +wskbd* at pckbd? console ? +wsmouse* at pms? mux 0 +wsmouse* at pmsi? mux 0 + +pcppi0 at isa? +sysbeep0 at pcppi? + +# Serial Devices + +# PCI serial interfaces +#com* at puc? port ? # 16x50s on "universal" comm boards +#cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards +#cz* at pci? dev ? function ? # Cyclades-Z multi-port serial boards + +# ISA Plug-and-Play serial interfaces +#com* at isapnp? # Modems and serial boards + +# PCMCIA serial interfaces +com* at pcmcia? function ? # Modems and serial cards + +pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards +com* at pcmcom? slave ? # ...and the slave devices + +# CardBus serial interfaces +com* at cardbus? dev ? function ? # Modems and serial cards + +# ISA serial interfaces +#options COM_HAYESP # adds Hayes ESP serial board support +com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports +com1 at isa? port 0x2f8 irq 3 +com2 at isa? port 0x3e8 irq 5 +#com3 at isa? port 0x2e8 irq 9 +#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards +#com* at ast? slave ? +#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards +#boca0 at isa? port 0x100 irq 5 # BOCA 16-port serial cards (BB2016) +#boca1 at isa? port 0x140 irq 5 # this line is also needed for BB2016 +#com* at boca? slave ? +#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards +#com* at tcom? slave ? +#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards +#com* at rtfps? slave ? +#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards +#addcom0 at isa? port 0x108 irq 5 # Addonics FlexPort 8S +#com* at addcom? slave ? +#moxa0 at isa? port 0x100 irq 5 # MOXA C168H serial card (experimental) +#com* at moxa? slave ? + + +# Parallel Printer Interfaces + +# PCI parallel printer interfaces +#lpt* at puc? port ? # || ports on "universal" comm boards + +# ISA parallel printer interfaces +lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports +lpt1 at isa? port 0x278 +lpt2 at isa? port 0x3bc + +# Hardware monitors + +# LM7[89] and compatible hardware monitors +#lm0 at isa? port 0x290 # other common ports: 0x280, 0x310 + +# VIA VT82C686A hardware monitor +#viapm* at pci? dev ? function ? +#viaenv* at viapm? + + +# I2O devices +#iop* at pci? dev ? function ? # I/O processor +#iopsp* at iop? tid ? # SCSI/FC-AL ports +#ld* at iop? tid ? # block devices + + +# SCSI Controllers and Devices + +# PCI SCSI controllers +#adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI +#adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI +#ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI +#bha* at pci? dev ? function ? # BusLogic 9xx SCSI +#dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID +#isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FibreChannel +#ncr* at pci? dev ? function ? # NCR 53c8xx SCSI (old driver) +#siop* at pci? dev ? function ? # Symbios 53c8xx SCSI +#pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI + +# EISA SCSI controllers +#ahb* at eisa? slot ? # Adaptec 174[02] SCSI +#ahc* at eisa? slot ? # Adaptec 274x, aic7770 SCSI +#bha* at eisa? slot ? # BusLogic 7xx SCSI +#dpt* at eisa? slot ? # DPT EATA SCSI +#uha* at eisa? slot ? # UltraStor 24f SCSI + +# PCMCIA SCSI controllers +aic* at pcmcia? function ? # Adaptec APA-1460 SCSI +esp* at pcmcia? function ? # Qlogic ESP406/FAS408 SCSI + +# ISA Plug-and-Play SCSI controllers +#aha* at isapnp? # Adaptec AHA-154[02 +#aic* at isapnp? # Adaptec AHA-1520B + +# ISA SCSI controllers +#adv0 at isa? port ? irq ? drq ? # AdvanSys APB-514[02] +#aha0 at isa? port 0x330 irq ? drq ? # Adaptec 154[02] SCSI +#aha1 at isa? port 0x334 irq ? drq ? +#ahc0 at isa? port ? irq ? # Adaptec 284x SCSI +#aic0 at isa? port 0x340 irq 11 # Adaptec 152[02] SCSI +#bha0 at isa? port 0x330 irq ? drq ? # BusLogic [457]4X SCSI +#bha1 at isa? port 0x334 irq ? drq ? +# The "nca" and "dpt" probes might give false hits or hang your machine. +#dpt0 at isa? port 0x170 irq ? drq ? # DPT SmartCache/SmartRAID +#nca0 at isa? port 0x360 irq 15 # Port-mapped NCR 53C80 controller +#nca1 at isa? iomem 0xd8000 irq 5 # Memory-mapped controller (T128, etc.) +#sea0 at isa? iomem 0xc8000 irq 5 # Seagate/Future Domain SCSI +#uha0 at isa? port 0x330 irq ? drq ? # UltraStor [13]4f SCSI +#uha1 at isa? port 0x340 irq ? drq ? +#wds0 at isa? port 0x350 irq 15 drq 6 # WD7000 and TMC-7000 controllers +#wds1 at isa? port 0x358 irq 11 drq 5 + +# CardBus SCSI cards +ahc* at cardbus? dev ? function ? # Adaptec ADP-1480 + +# SCSI bus support +#scsibus* at adv? +#scsibus* at adw? +#scsibus* at aha? +#scsibus* at ahb? +scsibus* at ahc? +scsibus* at aic? +#scsibus* at bha? +#scsibus* at dpt? +scsibus* at esp? +#scsibus* at iopsp? +#scsibus* at isp? +#scsibus* at nca? +#scsibus* at ncr? +#scsibus* at pcscp? +#scsibus* at sea? +#scsibus* at siop? +#scsibus* at uha? +#scsibus* at wds? + +# SCSI devices +sd* at scsibus? target ? lun ? # SCSI disk drives +st* at scsibus? target ? lun ? # SCSI tape drives +cd* at scsibus? target ? lun ? # SCSI CD-ROM drives +ch* at scsibus? target ? lun ? # SCSI autochangers +ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices +ss* at scsibus? target ? lun ? # SCSI scanners +uk* at scsibus? target ? lun ? # SCSI unknown + + +# RAID controllers and devices +#cac* at eisa? # Compaq EISA array controllers +#cac* at pci? dev ? function ? # Compaq PCI array controllers +#mlx* at pci? dev ? function ? # Mylex DAC960 & DEC SWXCR family +#twe* at pci? dev ? function ? # 3ware Escalade RAID controllers + +#ld* at cac? unit ? # logical disk devices +#ld* at twe? unit ? +#ld* at mlx? unit ? + + +# IDE and related devices +# PCI IDE controllers - see pciide(4) for supported hardware. +# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know +# how to set up DMA modes for this chip. This may work, or may cause +# a machine hang with some controllers. +pciide* at pci? dev ? function ? flags 0x0000 + +# ISA Plug-and-Play IDE controllers +#wdc* at isapnp? + +# PCMCIA IDE controllers +wdc* at pcmcia? function ? + +# ISA ST506, ESDI, and IDE controllers +# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will +# fall back to 16bits I/O if 32bits I/O are not functional). +# Some controllers pass the initial 32bit test, but will fail later. +wdc0 at isa? port 0x1f0 irq 14 flags 0x00 +wdc1 at isa? port 0x170 irq 15 flags 0x00 + +# IDE drives +# Flags are used only with controllers that support DMA operations +# and mode settings (e.g. some pciide controllers) +# The lowest order four bits (rightmost digit) of the flags define the PIO +# mode to use, the next set of four bits the DMA mode and the third set the +# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode +# to use, and the last bit must be 1 for this setting to be used. +# For DMA and UDMA, 0xf (1111) means 'disable'. +# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. +# (0xc=1100, 0xa=1010, 0xf=1111) +# 0x0000 means "use whatever the drive claims to support". +wd* at wdc? channel ? drive ? flags 0x0000 +wd* at pciide? channel ? drive ? flags 0x0000 + +# ATAPI bus support +atapibus* at wdc? channel ? +atapibus* at pciide? channel ? + +# ATAPI devices +# flags have the same meaning as for IDE drives. +cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives +sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives +uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown + + +# Miscellaneous mass storage devices + +# ISA floppy +fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers +#fdc1 at isa? port 0x370 irq ? drq ? +fd* at fdc? drive ? # the drives themselves +# some machines need you to do this instead of fd* +#fd0 at fdc0 drive 0 + +# ISA CD-ROM devices +#mcd0 at isa? port 0x300 irq 10 # Mitsumi CD-ROM drives + +# ISA tape devices +# note: the wt driver conflicts unpleasantly with SMC boards at the +# same I/O address. The probe reprograms their EEPROMs. Don't +# uncomment it unless you are actually using it. +#wt0 at isa? port 0x308 irq 5 drq 1 # Archive and Wangtek QIC tape drives + + +# Network Interfaces + +# PCI network interfaces +#an* at pci? dev ? function ? # Aironet PC4500/PC4800 (802.11) +#de* at pci? dev ? function ? # DEC 21x4x-based Ethernet +#en* at pci? dev ? function ? # ENI/Adaptec ATM +#ep* at pci? dev ? function ? # 3Com 3c59x +ex* at pci? dev ? function ? # 3Com 90x[B] +#epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet +#esh* at pci? dev ? function ? # Essential HIPPI card +#fpa* at pci? dev ? function ? # DEC DEFPA FDDI +fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B +#le* at pci? dev ? function ? # PCnet-PCI Ethernet +#lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3 +#ne* at pci? dev ? function ? # NE2000-compatible Ethernet +#ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial +#rtk* at pci? dev ? function ? # Realtek 8129/8139 +#sip* at pci? dev ? function ? # SiS 900 Ethernet +ti* at pci? dev ? function ? # Alteon ACEnic gigabit Ethernet +#tl* at pci? dev ? function ? # ThunderLAN-based Ethernet +#tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) Ethernet +#options TLP_MATCH_21040 +#options TLP_MATCH_21041 +#options TLP_MATCH_21140 +#options TLP_MATCH_21142 +#vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet + +# EISA network interfaces +#ep* at eisa? slot ? # 3Com 3c579 Ethernet +#fea* at eisa? slot ? # DEC DEFEA FDDI +#tlp* at eisa? slot ? # DEC DE-425 Ethernet + +# ISA Plug-and-Play network interfaces +#an* at isapnp? # Aironet 802.11 +#ep* at isapnp? # 3Com 3c509 Ethernet +#ne* at isapnp? # NE2000-compatible Ethernet +#tr* at isapnp? # IBM/3COM TROPIC Token-Ring + +# PCMCIA network interfaces +an* at pcmcia? function ? # Aironet PC4500/PC4800 (802.11) +awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS) +cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer +ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet +mbe* at pcmcia? function ? # MB8696x based Ethernet +ne* at pcmcia? function ? # NE2000-compatible Ethernet +ray* at pcmcia? function ? # Raytheon Raylink (802.11) +sm* at pcmcia? function ? # Megahertz Ethernet +wi* at pcmcia? function ? # Lucent WaveLan IEEE (802.11) +xi* at pcmcia? function ? # Xircom CreditCard Ethernet + +mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards +com* at mhzc? +sm* at mhzc? + +# ISA network interfaces +#ate0 at isa? port 0x2a0 irq ? # AT1700 +#cs0 at isa? port 0x300 iomem ? irq ? drq ? # CS8900 Ethernet +#ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet +#eg0 at isa? port 0x280 irq 9 # 3C505 ethernet cards +#el0 at isa? port 0x300 irq 9 # 3C501 ethernet cards +#ep* at isa? port ? irq ? # 3C509 ethernet cards +#ef0 at isa? port 0x360 iomem 0xd0000 irq 7 # 3C507 +#ai0 at isa? port 0x360 iomem 0xd0000 irq 7 # StarLAN +#fmv0 at isa? port 0x2a0 irq ? # FMV-180 series +#ix0 at isa? port 0x300 irq 10 # EtherExpress/16 +#iy0 at isa? port 0x360 irq ? # EtherExpress PRO 10 ISA +#lc0 at isa? port 0x320 iomem ? irq ? # DEC EtherWORKS III (LEMAC) +#depca0 at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5 # DEPCA +#le* at depca? +#nele0 at isa? port 0x320 irq 9 drq 7 # NE2100 +#le* at nele? +#ntwoc0 at isa? port 0x300 irq 5 iomem 0xc8000 flags 1 # Riscom/N2 sync serial +#bicc0 at isa? port 0x320 irq 10 drq 7 # BICC IsoLan +#le* at bicc? +#ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards +#ne1 at isa? port 0x300 irq 10 +sm0 at isa? port 0x300 irq 10 # SMC91C9x Ethernet +#tr0 at isa? port 0xa20 iomem 0xd8000 irq ? # IBM TROPIC based Token-Ring +#tr1 at isa? port 0xa24 iomem 0xd0000 irq ? # IBM TROPIC based Token-Ring +#tr* at isa? port ? irq ? # 3COM TROPIC based Token-Ring +#we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet +#we1 at isa? port 0x300 iomem 0xcc000 irq 10 + +# CardBus network cards +ex* at cardbus? dev ? function ? # 3Com 3C575TX +fxp* at cardbus? dev ? function ? # Intel i8255x +rtk* at cardbus? dev ? function ? # Realtek 8129/8139 +tlp* at cardbus? dev ? function ? # DECchip 21143 + +# MII/PHY support +dmphy* at mii? phy ? # Davicom DM9101 PHYs +exphy* at mii? phy ? # 3Com internal PHYs +icsphy* at mii? phy ? # Integrated Circuit Systems ICS1890 +inphy* at mii? phy ? # Intel 82555 PHYs +iophy* at mii? phy ? # Intel 82553 PHYs +lxtphy* at mii? phy ? # Level One LXT-970 PHYs +nsphy* at mii? phy ? # NS83840 PHYs +nsphyter* at mii? phy ? # NS83843 PHYs +qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs +sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs +tlphy* at mii? phy ? # ThunderLAN PHYs +tqphy* at mii? phy ? # TDK Semiconductor PHYs +ukphy* at mii? phy ? # generic unknown PHYs + + +# USB Controller and Devices + +# PCI USB controllers +ohci* at pci? dev ? function ? # Open Host Controller +uhci* at pci? dev ? function ? # Universal Host Controller (Intel) + +# CardBus USB controllers +ohci* at cardbus? dev ? function ? # Open Host Controller + +# USB bus support +usb* at ohci? +usb* at uhci? + +# USB Hubs +uhub* at usb? +uhub* at uhub? port ? configuration ? interface ? + +# USB Mice +ums* at uhub? port ? configuration ? interface ? +wsmouse* at ums? mux 0 + +# USB Keyboards +ukbd* at uhub? port ? configuration ? interface ? +wskbd* at ukbd? console ? mux 1 + +# USB Generic HID devices +uhid* at uhub? port ? configuration ? interface ? + +# USB Printer +ulpt* at uhub? port ? configuration ? interface ? + +# USB Modem +umodem* at uhub? port ? configuration ? +ucom* at umodem? + +# USB Mass Storage +umass* at uhub? port ? configuration ? interface ? +atapibus* at umass? channel ? +scsibus* at umass? channel ? + +# USB audio +uaudio* at uhub? port ? configuration ? + +# USB MIDI +umidi* at uhub? port ? configuration ? + +# USB Ethernet adapters +aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters +cue* at uhub? port ? # CATC USB-EL1201A based adapters +kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters + +# Prolofic PL2301/PL2302 host-to-host adapter +upl* at uhub? port ? + +# Serial adapters +# FTDI FT8U100AX serial adapter +uftdi* at uhub? port ? +ucom* at uftdi? portno ? + +uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter +ucom* at uplcom? portno ? + +umct* at uhub? port ? # MCT USB-RS232 serial adapter +ucom* at umct? portno ? + +# Diamond Multimedia Rio 500 +urio* at uhub? port ? + +# USB Handspring Visor +uvisor* at uhub? port ? +ucom* at uvisor? + +# USB scanners +uscanner* at uhub? port ? + +# USB scanners that use SCSI emulation, e.g., HP5300 +usscanner* at uhub? port ? +scsibus* at usscanner? channel ? + +# Y@P firmware loader +uyap* at uhub? port ? + +# USB Generic driver +ugen* at uhub? port ? + + +# Audio Devices + +# PCI audio devices +auich* at pci? dev ? function ? # Intel ICH integrated AC'97 Audio +auvia* at pci? dev ? function ? # VIA VT82C686A integrated AC'97 Audio +clcs* at pci? dev ? function ? # Cirrus Logic CS4280 +clct* at pci? dev ? function ? # Cirrus Logic CS4281 +cmpci* at pci? dev ? function ? # C-Media CMI8338/8738 +eap* at pci? dev ? function ? # Ensoniq AudioPCI +esm* at pci? dev ? function ? # ESS Maestro-1/2/2e PCI Audio Accelerator +eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive +fms* at pci? dev ? function ? # Forte Media FM801 +neo* at pci? dev ? function ? # NeoMagic 256 AC'97 Audio +sv* at pci? dev ? function ? # S3 SonicVibes + +# ISA Plug-and-Play audio devices +#ess* at isapnp? # ESS Tech ES1887, ES1888, ES888 audio +#guspnp* at isapnp? # Gravis Ultra Sound PnP audio +#sb* at isapnp? # SoundBlaster-compatible audio +#wss* at isapnp? # Windows Sound System +#ym* at isapnp? # Yamaha OPL3-SA3 audio + +# ISA audio devices +# the "aria" probe might give false hits +#aria0 at isa? port 0x290 irq 10 # Aria +#ess0 at isa? port 0x220 irq 5 drq 1 drq2 5 # ESS 18XX +#gus0 at isa? port 0x220 irq 7 drq 1 drq2 6 # Gravis Ultra Sound +#pas0 at isa? port 0x220 irq 7 drq 1 # ProAudio Spectrum +#pss0 at isa? port 0x220 irq 7 drq 6 # Personal Sound System +#sp0 at pss0 port 0x530 irq 10 drq 0 # sound port driver +sb0 at isa? port 0x220 irq 5 drq 1 drq2 5 # SoundBlaster +wss0 at isa? port 0x530 irq 10 drq 0 drq2 1 # Windows Sound System + +#cms0 at isa? port 0x220 # Creative Music System + +# OPL[23] FM synthesizers +#opl0 at isa? port 0x388 # use only if not attached to sound card +opl* at eso? +#opl* at ess? +opl* at fms? +opl* at sb? +opl* at sv? +opl* at wss? +#opl* at ym? + +# Audio support +#audio* at aria? +audio* at auich? +audio* at auvia? +audio* at clcs? +audio* at clct? +audio* at cmpci? +audio* at eap? +audio* at esm? +audio* at eso? +#audio* at ess? +audio* at fms? +#audio* at gus? +#audio* at guspnp? +audio* at neo? +#audio* at pas? +audio* at sb? +#audio* at sp? +audio* at sv? +audio* at uaudio? +audio* at wss? +#audio* at ym? + +# MPU 401 UARTs +#mpu* at isa? port 0x330 irq 9 # MPU401 or compatible card +mpu* at eso? +mpu* at fms? +mpu* at sb? +#mpu* at ym? + +# MIDI support +midi* at clcs? # Cirrus Logic CS4280 MIDI port +#midi* at clct? # Cirrus Logic CS4281 MIDI port +#midi* at cms? # Creative Music System +midi* at eap? # 137[01] MIDI port +midi* at mpu? # MPU 401 +midi* at opl? # OPL FM synth +midi* at pcppi? # MIDI interface to the PC speaker +midi* at sb? # SB1 MIDI port +midi* at umidi? # USB MIDI + +# The spkr driver provides a simple tone interface to the built in speaker. +#spkr0 at pcppi? # PC speaker + + +# TV cards + +# Brooktree 848/849/878/879 based TV cards +#bktr* at pci? dev ? function ? + + +# Mice + +# ISA busmice +#lms0 at isa? port 0x23c irq 5 # Logitech bus mouse +#lms1 at isa? port 0x238 irq 5 +#mms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse +#mms1 at isa? port 0x238 irq 5 +#wsmouse* at lms? mux 0 +#wsmouse* at mms? mux 0 +# backwards compatible versions +#olms0 at isa? port 0x23c irq 5 # Logitech bus mouse +#olms1 at isa? port 0x238 irq 5 +#omms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse +#omms1 at isa? port 0x238 irq 5 +#opms0 at pc? irq 12 # PS/2 auxiliary port mouse + + +# Joysticks + +#joy* at pnpbios? index ? # Game port + +# ISA Plug-and-Play joysticks +#joy* at isapnp? # Game ports (usually on audio cards) + +# PCI joysticks +#joy* at pci? # Game ports (usually on audio cards) + +# ISA joysticks. Probe is a little strange; add only if you have one. +#joy0 at isa? port 0x201 + + +# Miscellaneous Devices + +# Planetconnect Satellite receiver driver. +#satlink0 at isa? port 0x300 drq 1 + + +# Pull in optional local configuration +include "arch/i386/conf/GENERIC.local" + + +# Pseudo-Devices + +# disk/mass storage pseudo-devices +pseudo-device ccd 4 # concatenated/striped disk devices +#pseudo-device raid 4 # RAIDframe disk driver +#options RAID_AUTOCONFIG # auto-configuration of RAID components +pseudo-device md 1 # memory disk device (ramdisk) +pseudo-device vnd 4 # disk-like interface to files + +# network pseudo-devices +pseudo-device bpfilter 8 # Berkeley packet filter +pseudo-device ipfilter # IP filter (firewall) and NAT +pseudo-device loop # network loopback +pseudo-device ppp 2 # Point-to-Point Protocol +pseudo-device sl 2 # Serial Line IP +pseudo-device strip 2 # Starmode Radio IP (Metricom) +pseudo-device tun 2 # network tunneling over tty +pseudo-device gre 2 # generic L3 over IP tunnel +pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) +pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) +#pseudo-device faith 1 # IPv[46] tcp relay translation i/f +#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation +pseudo-device vlan # IEEE 802.1q encapsulation + +# miscellaneous pseudo-devices +pseudo-device pty # pseudo-terminals +pseudo-device tb 1 # tablet line discipline +pseudo-device sequencer 1 # MIDI sequencer +# rnd works; RND_COM does not on port i386 yet. +pseudo-device rnd # /dev/random and in-kernel generator +#options RND_COM # use "com" randomness as well (BROKEN) + +# a pseudo device needed for Coda # also needs CODA (above) +pseudo-device vcoda 4 # coda minicache <-> venus comm. + +# mouse & keyboard multiplexor pseudo-devices +pseudo-device wsmux 2