Customary GENERIC configuration.
Unfortunately, the Cobalt firmware seems to fail loading kernels larger than about 2.5 megs before compression, so without a boot loader, this is a rather amputated GENERIC.
This commit is contained in:
soren
parent
bf2c43adb6
commit
712cb103ff
|
|
@ -0,0 +1,256 @@
|
|||
# $NetBSD: GENERIC,v 1.1 2000/03/30 20:01:02 soren Exp $
|
||||
|
||||
include "arch/cobalt/conf/std.cobalt"
|
||||
|
||||
#ident "GENERIC-$Revision: 1.1 $"
|
||||
|
||||
maxusers 32
|
||||
|
||||
# Standard system options
|
||||
options KTRACE # system call tracing support
|
||||
options SYSVMSG # System V message queues
|
||||
options SYSVSEM # System V semaphores
|
||||
options SYSVSHM # System V shared memory
|
||||
#options SHMMAXPGS=1024 # 1024 pages is the default
|
||||
options LKM # loadable kernel modules
|
||||
#options NTP # network time protocol
|
||||
#options UCONSOLE # users can redirect console (unsafe)
|
||||
|
||||
# Debugging options
|
||||
options DIAGNOSTIC # extra kernel sanity checking
|
||||
#options DEBUG # extra kernel debugging support
|
||||
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
||||
options DDB # kernel dynamic debugger
|
||||
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
|
||||
#makeoptions DEBUG="-g" # compile full symbol table
|
||||
|
||||
# Compatibility options
|
||||
options COMPAT_43 # compatibility with 4.3BSD binaries
|
||||
#options COMPAT_10 # NetBSD 0.9 binary compatibility
|
||||
#options COMPAT_10 # NetBSD 1.0 binary compatibility
|
||||
#options COMPAT_11 # NetBSD 1.1 binary compatibility
|
||||
#options COMPAT_12 # NetBSD 1.2 binary compatibility
|
||||
#options COMPAT_13 # NetBSD 1.3 binary compatibility
|
||||
#options COMPAT_14 # NetBSD 1.4 binary compatibility
|
||||
#options EXEC_ECOFF # exec ECOFF binaries
|
||||
#options COMPAT_ULTRIX # binary compatibility with Ultrix
|
||||
|
||||
# File systems
|
||||
file-system FFS # Berkeley Fast Filesystem
|
||||
file-system NFS # Sun NFS-compatible filesystem client
|
||||
file-system KERNFS # kernel data-structure filesystem
|
||||
#file-system NULLFS # NULL layered filesystem
|
||||
file-system OVERLAY # overlay file system
|
||||
file-system MFS # memory-based filesystem
|
||||
file-system FDESC # user file descriptor filesystem
|
||||
#file-system UMAPFS # uid/gid remapping filesystem
|
||||
file-system LFS # Log-based filesystem (still experimental)
|
||||
#file-system PORTAL # portal filesystem (still experimental)
|
||||
file-system PROCFS # /proc
|
||||
#file-system CD9660 # ISO 9660 + Rock Ridge file system
|
||||
#file-system UNION # union file system
|
||||
#file-system MSDOSFS # MS-DOS FAT filesystem(s).
|
||||
#file-system CODA # Coda File System; also needs vcoda (below)
|
||||
|
||||
# File system options
|
||||
options NFSSERVER # Sun NFS-compatible filesystem server
|
||||
options QUOTA # FFS quotas
|
||||
#options FFS_EI # FFS Endian Independant support
|
||||
#options SOFTDEP # FFS soft updates support.
|
||||
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
||||
# immutable) behave as system flags.
|
||||
|
||||
# Pull in config fragments for kernel crypto. This is required for
|
||||
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
|
||||
# one of these, based on whether you use crypto-us or crypto-intl, and
|
||||
# adjust the prefixes as necessary.
|
||||
|
||||
#prefix ../crypto-us/sys
|
||||
#cinclude "conf/files.crypto-us"
|
||||
#prefix
|
||||
|
||||
#prefix ../crypto-intl/sys
|
||||
#cinclude "conf/files.crypto-intl"
|
||||
#prefix
|
||||
|
||||
# Networking options
|
||||
#options GATEWAY # IP packet forwarding
|
||||
options INET # Internet protocols
|
||||
options INET6 # IPV6
|
||||
#options IPSEC # IP security
|
||||
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
||||
#options IPSEC_DEBUG # debug for IP security
|
||||
#options MROUTING # packet forwarding of multicast packets
|
||||
#options NS # Xerox NS networking
|
||||
#options NSIP # Xerox NS tunneling over IP
|
||||
#options ISO,TPIP # OSI networking
|
||||
#options EON # OSI tunneling over IP
|
||||
#options CCITT,LLC,HDLC # X.25
|
||||
#options NETATALK # AppleTalk (over Ethernet) protocol
|
||||
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
||||
#options PPP_DEFLATE # Deflate compression support for PPP
|
||||
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
||||
options PFIL_HOOKS # pfil(9) packet filter hooks
|
||||
options IPFILTER_LOG # ipmon(8) log support
|
||||
|
||||
# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended.
|
||||
#options TCP_COMPAT_42
|
||||
|
||||
# These options enable verbose messages for several subsystems.
|
||||
# Warning, these may compile large string tables into the kernel!
|
||||
options PCIVERBOSE # verbose PCI device autoconfig messages
|
||||
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
||||
options SCSIVERBOSE # human readable SCSI error messages
|
||||
|
||||
options NFS_BOOT_DHCP
|
||||
|
||||
config netbsd root on ? type ?
|
||||
|
||||
mainbus0 at root
|
||||
|
||||
cpu0 at mainbus?
|
||||
|
||||
com0 at mainbus? addr 0x1c800000 level 3
|
||||
options COM16650
|
||||
|
||||
gt0 at mainbus? addr 0x14000000
|
||||
|
||||
pci* at gt0
|
||||
pchb* at pci? dev ? function ?
|
||||
pcib* at pci? dev ? function ?
|
||||
|
||||
# PCI serial/parallel interfaces
|
||||
puc* at pci? dev ? function ? # PCI "universal" comm. cards
|
||||
com* at puc? port ?
|
||||
#lpt* at puc? port ?
|
||||
#cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial cards
|
||||
|
||||
# PCI SCSI controllers
|
||||
#adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA]
|
||||
#adw* at pci? dev ? function ? # AdvanSys 9xxUW SCSI
|
||||
ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
|
||||
#bha* at pci? dev ? function ? # BusLogic 9xx SCSI
|
||||
#dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID
|
||||
#isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FC
|
||||
ncr* at pci? dev ? function ? # NCR 53c8xx SCSI
|
||||
#pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
|
||||
|
||||
# SCSI bus support
|
||||
#scsibus* at adv?
|
||||
#scsibus* at adw?
|
||||
scsibus* at ahc?
|
||||
#scsibus* at bha?
|
||||
#scsibus* at dpt?
|
||||
#scsibus* at isp?
|
||||
scsibus* at ncr?
|
||||
#scsibus* at pcscp?
|
||||
|
||||
# SCSI devices
|
||||
sd* at scsibus? target ? lun ? # SCSI disk drives
|
||||
st* at scsibus? target ? lun ? # SCSI tape drives
|
||||
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
|
||||
ch* at scsibus? target ? lun ? # SCSI autochangers
|
||||
#ss* at scsibus? target ? lun ? # SCSI scanners
|
||||
uk* at scsibus? target ? lun ? # SCSI unknown
|
||||
|
||||
# RAID controllers and devices
|
||||
#cac* at pci? dev ? function ? # Compaq array controller
|
||||
#ca* at cac? unit ? # Compaq array disk device
|
||||
|
||||
# IDE and related devices
|
||||
# PCI IDE controllers - see pciide(4) for supported hardware.
|
||||
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
|
||||
# how to set up DMA modes for this chip. This may work, or may cause
|
||||
# a machine hang with some controllers.
|
||||
pciide* at pci? dev ? function ? flags 0x0000
|
||||
|
||||
# IDE drives
|
||||
# Flags are used only with controllers that support DMA operations
|
||||
# and mode settings (e.g. some pciide controllers)
|
||||
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
||||
# mode to use, the next set of four bits the DMA mode and the third set the
|
||||
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
||||
# to use, and the last bit must be 1 for this setting to be used.
|
||||
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
||||
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
||||
# (0xc=1100, 0xa=1010, 0xf=1111)
|
||||
# 0x0000 means "use whatever the drive claims to support".
|
||||
wd* at pciide? channel ? drive ? flags 0x0000
|
||||
|
||||
# PCI network interfaces
|
||||
#de* at pci? dev ? function ? # DEC 21x4x-based Ethernet
|
||||
#en* at pci? dev ? function ? # ENI/Adaptec ATM
|
||||
#ep* at pci? dev ? function ? # 3Com 3c59x
|
||||
#ex* at pci? dev ? function ? # 3Com 90x[B]
|
||||
#epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
|
||||
#esh* at pci? dev ? function ? # Essential HIPPI card
|
||||
#fpa* at pci? dev ? function ? # DEC DEFPA FDDI
|
||||
#fxp* at pci? dev ? function ? # Intel EtherExpress PRO10+/100B
|
||||
#le* at pci? dev ? function ? # PCnet-PCI Ethernet
|
||||
#ne* at pci? dev ? function ? # NE2000-compatible Ethernet
|
||||
#ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial
|
||||
#sip* at pci? dev ? function ? # SiS 900 Ethernet
|
||||
#tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
|
||||
tlp* at pci? dev ? function ? # DECchip 21x4x (and clones)
|
||||
#options TLP_MATCH_21040
|
||||
#options TLP_MATCH_21041
|
||||
#options TLP_MATCH_21140
|
||||
options TLP_MATCH_21142
|
||||
#vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
|
||||
#lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
|
||||
#rl* at pci? dev ? function ? # Realtek 8129/8139
|
||||
|
||||
# MII/PHY support
|
||||
#exphy* at mii? phy ? # 3Com internal PHYs
|
||||
#icsphy* at mii? phy ? # ICS1890 PHYs
|
||||
#inphy* at mii? phy ? # Intel 82555 PHYs
|
||||
#iophy* at mii? phy ? # Intel 82553 PHYs
|
||||
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
|
||||
#nsphy* at mii? phy ? # NS83840 PHYs
|
||||
#nsphyter* at mii? phy ? # NS83843 PHYs
|
||||
#qsphy* at mii? phy ? # Quality Semiconductor QS6612
|
||||
#sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
|
||||
#tlphy* at mii? phy ? # ThunderLAN PHYs
|
||||
#tqphy* at mii? phy ? # TDK Semiconductor PHYs
|
||||
#ukphy* at mii? phy ? # generic unknown PHYs
|
||||
|
||||
# PCI audio devices
|
||||
#clcs* at pci? dev ? function ? # Cirrus Logic CS4280
|
||||
#eap* at pci? dev ? function ? # Ensoniq AudioPCI
|
||||
#eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
|
||||
#fms* at pci? dev ? function ? # Forte Media FM801
|
||||
#sbl* at pci? dev ? function ? # SoundBlaster Live!
|
||||
#sv* at pci? dev ? function ? # S3 SonicVibes
|
||||
|
||||
# Pseudo-devices
|
||||
|
||||
# Disk/mass storage pseudo-devices
|
||||
pseudo-device ccd 4 # concatenated disk devices
|
||||
#pseudo-device raid 4 # RAIDframe disk driver
|
||||
#options RAID_AUTOCONFIG # auto-configuration of RAID
|
||||
pseudo-device md 1 # memory disk device (ramdisk)
|
||||
pseudo-device vnd 4 # disk-like interface to files
|
||||
|
||||
# Network pseudo-devices
|
||||
pseudo-device bpfilter 8 # Berkeley packet filter
|
||||
pseudo-device ipfilter # IP filter (firewall) and NAT
|
||||
pseudo-device loop # network loopback
|
||||
#pseudo-device ppp 2 # Point-to-Point Protocol
|
||||
#pseudo-device sl 2 # Serial Line IP
|
||||
#pseudo-device strip 2 # Starmode Radio IP (Metricom)
|
||||
#pseudo-device tun 2 # network tunneling over tty
|
||||
#pseudo-device gre 2 # generic L3 over IP tunnel
|
||||
#pseudo-device ipip 2 # RFC 2003 IP Encapsulation
|
||||
#pseudo-device gif 4 # RFC1933 tunnel
|
||||
#pseudo-device faith 1 # IPv[46] tcp relay translation
|
||||
|
||||
# Miscellaneous pseudo-devices
|
||||
pseudo-device pty 64 # pseudo-terminals
|
||||
#pseudo-device tb 1 # tablet line discipline
|
||||
#pseudo-device sequencer 1 # MIDI sequencer
|
||||
# rnd works; RND_COM does not on port i386 yet.
|
||||
pseudo-device rnd # /dev/random & kernel generator
|
||||
#options RND_COM # use "com" randomness (BROKEN)
|
||||
|
||||
# A pseudo device needed for Coda # also needs CODA (above)
|
||||
#pseudo-device vcoda 4 # coda minicache <-> venus comm.
|
||||
Loading…
Reference in New Issue