This hasn't been used since the NetBSD 1.3.3.
This commit is contained in:
simonb
parent
1e8ccbac70
commit
65890eaf66
|
|
@ -1,192 +0,0 @@
|
|||
Guide for the Impatient
|
||||
-----------------------
|
||||
$NetBSD: QUICK.INSTALL,v 1.5 2001/08/26 12:00:17 simonb Exp $
|
||||
|
||||
NetBSD 1.3.3 includes the install materials on CD. However, we cannot
|
||||
make a single CD bootable on a dozen systems, so the CD cannot be
|
||||
booted directly in a DECstation. If your DECstation already has an OS
|
||||
installed and has a CD-ROM drive, you can install NetBSD by mounting the
|
||||
CD and copying a miniroot to your swap partition.
|
||||
|
||||
NOTE: You should still read the INSTALL notes at the top of the pmax
|
||||
section of the CD or FTP area (in the same directory as these quick
|
||||
installation notes). There will be information in the INSTALL notes
|
||||
that is not covered here.
|
||||
|
||||
|
||||
In the following instructions, lines starting with a # character are
|
||||
comments and are not typed in. It is also assumed that your CD-ROM
|
||||
drive is at SCSI id 4, and your disk is at SCSI id 0.
|
||||
|
||||
|
||||
NOTE FOR ULTRIX UPGRADES:
|
||||
You will need the existing Ultrix root filesystem at least 24MB in size
|
||||
(32MB is preferable), and the following swap partition to be at least
|
||||
32MB (to fit the miniroot). Remember to use the same root filesystem
|
||||
size and swap partition offset when you set up your disk layout in
|
||||
sysinst. Writing down the output of 'chpt -q /dev/rrzXc' would be a
|
||||
good idea. If you have a smaller root filesystem, but extra room in
|
||||
your swap partition (for example a 16MB root filesystem but a 48MB
|
||||
swap partition), you can move the start of the swap partition forward
|
||||
and leave a "gap" between the existing root filesystem and the swap
|
||||
partition. If you have any questions, send them to the NetBSD/pmax
|
||||
mailing list at
|
||||
.Mt port-pmax@netbsd.org .
|
||||
|
||||
|
||||
Under Ultrix, do:
|
||||
|
||||
# Boot into single user mode
|
||||
boot -f rz(0,0,0)vmunix # on 2100, 3100
|
||||
boot 5/rz0/vmunix # on 5000/200
|
||||
boot 3/rz0/vmunix # on all other models
|
||||
|
||||
# At the single-user root prompt
|
||||
mkdir -p /cdrom
|
||||
mount -r -t cdfs -o nodefperm,noversion /dev/rz4c /cdrom
|
||||
# NOTE: Ultrix doesn't have rock ridge extensions, so leave out
|
||||
# everything between the first and last . in the paths on
|
||||
# the CD.
|
||||
PATH=$PATH:/cdrom/NetBSD-1.3/pmax/installation/misc; export PATH
|
||||
|
||||
# Check that your swap partition is at least 32Mbytes
|
||||
chpt -q /dev/rz0c
|
||||
# Look at the "b" partition, you'll need at least 65536 blocks
|
||||
|
||||
# Put the netbsd kernel on the root filesystem
|
||||
cd /cdrom/NetBSD-1.3/pmax/binary/kernel
|
||||
gunzip -c netbsd.ecoff.gz > /netbsd
|
||||
# Copy the diskimage to the swap partition
|
||||
cd ../../installation/diskimage
|
||||
gunzip -c diskimage.gz | dd of=/dev/rrz0b bs=32k
|
||||
|
||||
# ... halt and follow install from instructions for booting diskimage
|
||||
# from swap partition, using netbsd as the kernel name
|
||||
halt
|
||||
|
||||
boot -f rz(0,0,0)netbsd n # on 2100, 3100
|
||||
boot 5/rz0/netbsd n # on 5000/200
|
||||
boot 3/rz0/netbsd n # on all other models
|
||||
|
||||
[... Kernel boot messages and copyright...]
|
||||
|
||||
boot device: rz0
|
||||
root device (default rz0a): rz0b # enter "rz0b" for root device
|
||||
dump device (default rz0b): none # enter "none" for dump device
|
||||
file system (default generic): # press <return> at this prompt
|
||||
root on rz0b
|
||||
WARNING: clock gained 50 days -- CHECK AND RESET THE DATE!
|
||||
root file system type: ffs
|
||||
Enter pathname of shell or RETURN for sh:
|
||||
|
||||
# Now proceed to instructions in the INSTALL document for running sysinst
|
||||
|
||||
|
||||
From an earlier version of NetBSD (or OpenBSD), do:
|
||||
|
||||
# Boot into single user mode
|
||||
boot -f rz(0,0,0)netbsd # on 2100, 3100
|
||||
boot 5/rz0/netbsd # on 5000/200
|
||||
boot 3/rz0/netbsd # on all other models
|
||||
|
||||
# At the single-user root prompt
|
||||
mount -u /
|
||||
mount -r /usr # if /usr is on a separate filesystem
|
||||
mkdir -p /cdrom
|
||||
mount -r -t cd9660 /dev/rz4c /cdrom
|
||||
|
||||
# Check that your swap partition is at least 32Mbytes
|
||||
disklabel rz0
|
||||
# Look at the "b" partition, you'll need at least 65536 blocks
|
||||
|
||||
# Put the new netbsd kernel on the root filesystem
|
||||
cd /cdrom/NetBSD-1.3.3/pmax/binary/kernel
|
||||
gunzip -c netbsd.gz > /netbsd-1.3.3
|
||||
# Copy the diskimage to the swap partition
|
||||
cd ../../installation/diskimage
|
||||
gunzip -c diskimage.gz | dd of=/dev/rrz0b bs=32k
|
||||
|
||||
# ... halt and follow install from instructions for booting diskimage
|
||||
# from swap partition, using netbsd-1.3.3 as the kernel name
|
||||
halt
|
||||
|
||||
boot -f rz(0,0,0)netbsd-1.3.3 n # on 2100, 3100
|
||||
boot 5/rz0/netbsd-1.3.3 n # on 5000/200
|
||||
boot 3/rz0/netbsd-1.3.3 n # on all other models
|
||||
|
||||
[... Kernel boot messages and copyright...]
|
||||
|
||||
boot device: rz0
|
||||
root device (default rz0a): rz0b # enter "rz0b" for root device
|
||||
dump device (default rz0b): none # enter "none" for dump device
|
||||
file system (default generic): # press <return> at this prompt
|
||||
root on rz0b
|
||||
WARNING: clock gained 50 days -- CHECK AND RESET THE DATE!
|
||||
root file system type: ffs
|
||||
Enter pathname of shell or RETURN for sh:
|
||||
|
||||
# Now proceed to instructions in the INSTALL document for running sysinst
|
||||
|
||||
|
||||
If your machine has Ultrix and your network bandwidth can sustain FTPing
|
||||
10 Megabytes to get the initial diskimage, you can fetch the diskimage
|
||||
via FTP. Something similar will also work for a network connected
|
||||
NetBSD machine - the main change would be to not get the Ultrix version
|
||||
of gunzip from the FTP site.
|
||||
|
||||
# While still in multi-user mode, ftp files to a local filesystem
|
||||
|
||||
# check for 12MB free space - need ~2MB on / and ~10MB on
|
||||
# /place/for/files
|
||||
df
|
||||
cd /place/for/files
|
||||
# Connect to the NetBSD ftp archive or whatever your local
|
||||
# "mirror" site is.
|
||||
ftp ftp.netbsd.org
|
||||
Name: ftp
|
||||
Password: your@email.address
|
||||
ftp> bin
|
||||
ftp> cd /pub/NetBSD/NetBSD-1.3.3/pmax/installation/misc
|
||||
ftp> get gunzip
|
||||
ftp> cd ../diskimage
|
||||
ftp> get diskimage.gz
|
||||
ftp> cd ../../binary/kernel
|
||||
ftp> get netbsd.ecoff.gz
|
||||
ftp> quit
|
||||
chmod 755 gunzip
|
||||
./gunzip -c < netbsd.ecoff.gz > /netbsd
|
||||
|
||||
# Shutdown and boot into single user mode
|
||||
shutdown -h now
|
||||
|
||||
boot -f rz(0,0,0)vmunix # on 2100, 3100
|
||||
boot 5/rz0/vmunix # on 5000/200
|
||||
boot 3/rz0/vmunix # on all other models
|
||||
|
||||
# At the single-user root prompt
|
||||
mount -a -t ufs
|
||||
cd /place/for/files
|
||||
|
||||
# Copy the diskimage to the swap partition
|
||||
./gunzip -c diskimage.gz | dd of=/dev/rrz0b bs=32k
|
||||
|
||||
# ... halt and follow install from instructions for booting diskimage
|
||||
# from swap partition, using netbsd as the kernel name
|
||||
halt
|
||||
|
||||
boot -f rz(0,0,0)netbsd n # on 2100, 3100
|
||||
boot 5/rz0/netbsd n # on 5000/200
|
||||
boot 3/rz0/netbsd n # on all other models
|
||||
|
||||
[... Kernel boot messages and copyright...]
|
||||
|
||||
boot device: sd0
|
||||
root device (default sd0a): sd0b # enter "sd0b" for root device
|
||||
dump device (default sd0b): none # enter "none" for dump device
|
||||
file system (default generic): # press <return> at this prompt
|
||||
root on sd0b
|
||||
WARNING: clock gained 50 days -- CHECK AND RESET THE DATE!
|
||||
root file system type: ffs
|
||||
Enter pathname of shell or RETURN for sh:
|
||||
|
||||
# Now proceed to instructions in the INSTALL document for running sysinst
|
||||
Loading…
Reference in New Issue