diff --git a/sys/arch/sparc/stand/installboot/Makefile b/sys/arch/sparc/stand/installboot/Makefile index 549e9514d0ec..4f49da1f415b 100644 --- a/sys/arch/sparc/stand/installboot/Makefile +++ b/sys/arch/sparc/stand/installboot/Makefile @@ -1,8 +1,7 @@ -# $NetBSD: Makefile,v 1.4 1997/06/01 03:39:42 mrg Exp $ +# $NetBSD: Makefile,v 1.5 1997/06/16 13:58:24 mrg Exp $ PROG= installboot -MAN= installboot.8 -MANSUBDIR= /sparc +NOMAN= LDSTATIC= -static diff --git a/sys/arch/sparc/stand/installboot/installboot.8 b/sys/arch/sparc/stand/installboot/installboot.8 deleted file mode 100644 index 04ce1e2063f3..000000000000 --- a/sys/arch/sparc/stand/installboot/installboot.8 +++ /dev/null @@ -1,152 +0,0 @@ -.\" $NetBSD: installboot.8,v 1.1 1997/06/01 03:39:44 mrg Exp $ -.\" -.\" Copyright (c) 1995 Paul Kranenburg -.\" All rights reserved. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. Redistributions in binary form must reproduce the above copyright -.\" notice, this list of conditions and the following disclaimer in the -.\" documentation and/or other materials provided with the distribution. -.\" 3. All advertising materials mentioning features or use of this software -.\" must display the following acknowledgement: -.\" This product includes software developed by Paul Kranenburg. -.\" 3. The name of the author may not be used to endorse or promote products -.\" derived from this software without specific prior written permission -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -.\" -.Dd September 29, 1995 -.Dt INSTALLBOOT 8 -.Os -.Sh NAME -.Nm installboot -.Nd install a bootstrap on an FFS filesystem partition -.Sh SYNOPSIS -.Nm installboot -.Op Fl nvh -.Op Fl a Ar karch -.Ar boot -.Ar bootxx -.Ar device -.Sh DESCRIPTION -.Nm installboot -prepares a FFS filesystem partition for boot-strapping from the PROM. -The sparc bootblocks are split into two parts: a small first-stage program that -is written into the superblock area in a partition -.Po -and hence is limited in size to SBSIZE - DEV_BSIZE bytes -.Pc , -and a second-stage program that resides in the filesystem proper. -The first-stage program is loaded into memory by the PROM. After it receiving -control, it loads the second stage program from a set of filesystem block -numbers that have been hard-coded into it by the -.Nm installboot -program. The second-stage boot program uses the device driver interface to -the PROM and the stand-alone filesystem code in -.Dq libsa.a -to locate and load the kernel. -The second-stage boot program and the prototype code for the -first-stage bootprogram can be found in -.Pa /usr/mdec/boot -and -.Pa /usr/mdec/bootxx -respectively. The second-stage program commonly resides in the root directory -as -.Pa /boot . -The utility -.Pa /usr/mdec/binstall -can be used to properly copy the a second-stage bootprogram to its -destination. This script takes care of post-processing that is required -on -.Pf non- Tn Openboot -machines. -.Pp -The options are as follows: -.Bl -tag -width flag -.It Fl a Ar karch -Set the machine architecture. The argument -.Ar karch -can be one of -.Dq sun4 , -.Dq sun4c -or -.Dq sun4m . -Sun 4c models with -.Tn Openboot -PROMs need the header to be present, while Sun 4 systems with the -.Dq old monitor -interface require the header to be stripped off. This is normally taken -care of by -.Nm -automatically, but it's useful when preparing a bootable filesystem for -another system. -.It Fl h -Leave the -.Xr a.out 5 -header on the installed -.Ar bootxx -program. This option has been superseded by the -.Fl a Ar karch -option. -.It Fl n -Do not actually write anything on the disk. -.It Fl v -Verbose mode. -.El -.Pp -The arguments are: -.Bl -tag -width bootxx -.It Ar boot -the name of the second-stage boot program in the file system -where the first-stage boot program is to be installed. -.It Ar bootxx -the name of the prototype file for the first stage boot program. -.It Ar device -the name of the raw device in which the first-stage boot program -is to be installed. This should correspond to the block device -on which the file system containing -.Ar boot -is mounted. -.El -.Sh EXAMPLES -The following command will install the first-stage bootblocks in the -root filesystem -.Pq assumed to be mounted on Dq sd0a -using the file -.Pa /boot -as the second-level boot program: -.Bd -literal -offset indent -installboot /boot /usr/mdec/bootxx /dev/rsd0a -.Ed -.Sh BUGS -.Nm -requires simultaneous access to the mounted file system and -the raw device, but that is not allowed with the kernel -.Dv securelevel -variable set to a value greater than zero -.Pq the default , -so -.Nm installboot -only works in single-user mode -.Pq or insecure mode - see Xr init 8 . -.Sh "SEE ALSO" -.Xr disklabel 8 , -.Xr init 8 -.Sh HISTORY -The -.Nm -first appeared in -.Nx 1.1